Engineering Commons^™

Test 063: Townsend 15-30, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 064: Uncle Sam 20-30, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 065: Toro 6-10, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 062: Indiana 5-10, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 068: Bates Steel Mule Model F 15-22, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 060: Bates Steel Mule Model D 15-22, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 061: Holt Model T-16 40-60, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 067: Twin City 20-35, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 069: Port Huron 12-25, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Preliminary Study Of Possible Power Development On The Gasconade River, Charles Russell Barnard, Ronald Blair Wills, Harry Wesley Zieseniss

Bachelors Theses

"The location of a possible dam site on the Gasconade River as a thesis proved to be a very interesting subject. Our first trip pointed out to us that we had undertaken a large task. We also realized that our subject was too big to complete thouroughly sic in the time alloted. Due to this circumstance we tried to cover the essential facts and to eliminate as much of the detail work as possible. For instance, we made no attempt to make a complete survey of the basin, instead, we ran surveys for some distance up the river to give …

Efficient Field Methods For The Petroleum Geologist, Phillips Brooks Dolman

Professional Degree Theses

"The methods and systems suggested for the use of the petroleum geologist in the following manuscript are intended not only as subject matter for a thesis but also, I sincerely wish, that they may be of some use and help to those of The Missouri School of Mines who are planning to take up petroleum geology as a profession, but have not yet had the opportunity to study the practical or field end of this work ... This article is by no means intended as a text; the principal object being, as previously stated, to offer a few systems, methods, …

Mining, Concentration And Refining Of American Flake Graphite By The Griesemer Graphite Company, Joseph C. Barton

Professional Degree Theses

"The Griesemer Graphite Company was incorporated June 3, 1916, under the laws of Alabama, for the purpose of mining, milling and refining of flake graphite...Owing to strong competition in the graphite game, it will be impossible to give many interesting facts and figures in this thesis. The screen analysis worked for after each operation is carefully watched and the preparing of the ore, as well as the sizing of the flake, is one of the most important features in the production of flake graphite, especially that grade required by the crucible makers and the lubricating manufacturers. The carbon content is …

Unique Method Of Driving Large Tunnel At The Hannibal Quarry Of The Atlas Portland Cement Company, James Leonidas Boucher

Professional Degree Theses

"During the development of operations at the limestone Quarry of The Atlas Portland Cement Company, Hannibal, Mo., it was found necessary to drive a large tunnel from one open "cut" to a point where the opening up and development of other "cuts" could be carried on"--page 1.

The St. Johns River Bridge For Duval County, Florida, Enoch Ray Needles

Professional Degree Theses

No abstract provided.

Metallurgical Bookkeeping, John Owen Ambler

Professional Degree Theses

"A system of costs and metallurgical records similar to that outlined herein is in use in a number of modern Smelters, and is of interest as showing what information is desirable for proper plant control. From a study of this information, which is usually compiled monthly in such a manner that comparisons may be readily made, it is possible to modify current practice to obtain maximum operating efficiency, and to approximate very closely the benefit that may be derived from changes in and additions to the plant itself and the methods of operation, or in the materials received and treated. …

Milling Practice Of The Missouri-Kansas-Oklahoma Field As It Has Developed In The Past Two Years, Frank Stillmann Elfred

Professional Degree Theses

"The writer has limited his subject to deal with the past two years as it is only the past two years that a great deal of research has been done in the field upon milling ideas and practices; but I will briefly give you the evolution of our present milling and concentrating practices by means of the following flow sheets"--Page 1.

Electrolytic And Furnace Refining Of Copper In South East Missouri, Ray Gould Knickerbocker

Professional Degree Theses

"This article treats with the production of refined ingot copper from a Copper-Cobalt-Nickel Matte. The method employed to separate Copper from Cobalt and Nickel was the electrolytic process. The information given is the result of my experience as Superintendent of the copper department for The Missouri Cobalt Company, Fredericktown, Missouri. In order to simplify the article, it shall be divided into four parts, namely (1) the quality of product delivered to the copper department; (2) the leaching plant; (3) the electrolytic plant; (4) the furnace refinery"--Page 1.

Metallurgy Of Steel Castings, Earl Joesting Mcnely

Professional Degree Theses

"This Thesis is in the form of a report of the observations of the author while working in the American Steel Foundries plants in various departments. The parts of the report dealing the Moulding and Inspection of castings were written while in the Indiana Harbor Indiana plant. The parts dealing with the Laboratory and Furnace Operation were written while in the Granite City, Illinois plant. The company owns and operates six other plants but the material covered in this report will, in a general way cover the operations in these plants, also, in which foundry work is carried on"--Introduction, Page …

The Nebraska Tractor Law And Rules For Official Tractor Tests, L. W. Chase, E. E. Brackett, O. W. Sjogren, C. K. Shedd

Nebraska Agricultural Experiment Station: Historical Circulars

The Nebraska Tractor Law, which became effective July 15, 1919, was enacted to encourage the manufacture and sale of improved types of tractors and to contribute to a more successful use of the tractor for farming. It was thought that the best method of accomplishing these objects would be to require a tractor of each model sold in the State to be tested at the State University and to have the results of these tests made public. These tests will give reliable information on the power, capacity and fuel consumption of each tractor and also some information on endurance. The …

Rules For Official Tractor Tests, Nebraska Tractor Test Lab, Agicultural Experiment Station

Nebraska Tractor Tests

The Nebraska Tractor Law known as House Roll 85, 37th session, which became effective July 15, 1919, was enacted to encourage the manufacture and sale of imporved types of tractors and to contribute to a more successful use of the tractor for farming.

It was thought that the best method of accomplishing these objects would be to require a tractor of each model sold in the State to be tested at the State University and to have the results of these tests made public. These tests will give reliable information on the power capacity and fuel consumtion of each tractor …

Rules For Tractor Demonstrations, Nebraska Tractor Test Lab

Nebraska Tractor Tests

The object of these rules, instructions and data is to make all tractor demonstrations of this kind comparable and of the greatest educational value. Anyone who has conducted tractor demonstrations in the past has realized the necessity of some standard rules to follow and those who afterwards have referred to the results, deplore the lack of uniformity in the demonstrations and the data. For those who have not had this experience will find that it is a great help to have satisfactory rules to follow.

The value of these demonstrations depends largely upon the accuracy of the data reported on …

Father Of Test Law Explains It, Nebraska Tractor Test Lab

Nebraska Tractor Tests

Nebraska State Representative Wilmot F. Crozier of Osceola, Nebraska, who fathered and pushed the tractor bill through the Nebraska State Legislature. On September 19th, 1919, he tells why he formulated the law and his story to Implement & Trade Journal.

Graphics And Its Application To The Progress And Cost Analyses Of A House Building Construction Company, Frank Lewis Leonard Wilson

Masters Theses

"In the graphical analyses of Stresses in Framed Structures, we study, by means of diagrams, the stability or equilibrium of structures and the relation between the external forces and the stresses created in the members of the frame. The principle involved is that we may represent any force both as to direction and intensity by a straight line, by considering the direction of the line to be identical with that of the force and adjusting its length according to any arbitrary unit adopted for the forces under consideration. By this means we can solve the stresses in framed structures with …

Metallurgical Results From Black Copper Smelting, Preston King Horner

Professional Degree Theses

No abstract provided.

The Roasting Of Zinc Ores In The Manufacture Of Sulphuric Acid By The Contact Process, Clarence Eugene Peterson

Professional Degree Theses

"The unprecedented demand for sulphuric acid of the higher strengths (98% and higher) in the manufacture of explosives, has stimulated the zinc smelters to increased efforts in the recovery of their Roaster gases in the form of Sulphuric Acid. The Lead-chamber process is unsuitable, however, in making "strong" acid and the smelters naturally turned to the contact mass or catalytic processes. In the roasting of zinc ores practically all of the sulphur is removed as sulphur dioxide, the disagreeable odor and unmistakable injury to surrounding localities, of which, first led to the adoption of sulphuric acid plants by most zinc …

On The Microscopic Determination Of Cadmium In Metallic Zinc, James Presley Gill

Professional Degree Theses

"A quick and accurate determination of Cadmium in Metallic Zinc by all ordinary chemical methods now in use, so far as the writer has been able to ascertain is at best only approximate. However, longer methods and very delicate ones for determining Cadmium are in use that are very accurate, but these methods are so long and so delicate that very few commercial laboratories care to use them. Now, it has been known for some time that Zinc and Cadmium do not form an alloy which when in the solid exist either as a solution or a compound. They do …

Some Tests On The Grinding Of Cement Clinker With A Hardinge Conical Ball Mill, Gilbert F. Metz

Professional Degree Theses

"The Hardinge Conical Mill is the invention of Mr. H.W. Hardinge and has been fully patented by him. It has been used successfully in the grinding of ores, limestone, phosphate rock, feldspar and talc. The purpose of the tests in this thesis was to determine the worth and adaptability of the Conical Mill for the preliminary grinding of cement clinker and to determine the relative merits of this type of grinder as compared to the roll type of grinder. The tests herein were performed under the direction of the writer assisted personally and through correspondence by Mr. H.W. Hardinge of …

Determination Of Critical Point Of Concentrating Tables On Arizona Copper Ore, J. C. Finagin Jr., W. C. Hogoboom

Professional Degree Theses

"In the concentration of an ore by means of concentrating tables, there is a critical point in sizing beyond which the valuable minerals can not be recovered. Theoretically, the lighter gangue is washed over the side of' the table and the heavier mineral, regardless of size, is recoverable at the end, these concentrates being graded from coarse to fine sizes up the slope of the table. In practice, however, the finer sizes of concentrates are found mixed with the middlings and tailings, as indicated by the arrows on the diagram of the concentrating table shown below. The problem is to …

The Occurrence Of Oil And Gas In Osage County, Oklahoma, Donald Hewson Radcliffe

Professional Degree Theses

"Osage, the largest county in Oklahoma, is situated a little to the east of the north central part of the state. It consists of an area of approximately 2,350 square miles, or about a million and a half acres, extending from T. 20 N. to T. 29 N. and from R. 2 E. to R. 12 E. inclusive. As this country lies between some of the best oil producing areas of the State, as it is definitely known to be folded, and as the folds tested have proven that the chances of obtaining production on favorable "structure" in the Osage …

Electrolysis Of Neutral Solutions Of Znso₄, Knud Fabricius Hansen

Professional Degree Theses

"The purpose of the following experiments was to obtain informations concerning the character of the deposits, the efficiencey [sic], et al. in the electrolysis of neutral solutions of ZnSo₄"--Purpose, page 1.