Engineering Commons^™

A Design Science And Implementation Framework For Studying Interruptions And Its Application In A Dental Clinic., Carsten Ziegler

Electronic Theses and Dissertations

Interruptions during dental treatment are frequent, and often have detrimental effects on quality of care, patient safety and processing times, and have an impact on provider satisfaction and performance. Interruptions can significantly increase the cognitive load on dental providers, making it hard for them to concentrate on complex procedures. Frequent interruptions also disrupt the workflow in general, leading to delays in treatment, which can reduce the overall throughput of a clinic. Unfortunately, there is no comprehensive approach to collectively (i) analyze interruptions in dental healthcare, (ii) design an intervention, and (iii) implement and sustain it. This research proposes a comprehensive …

Electrokinetic Particle Trapping Performance Of Conductive Nanofiber Mats In Microfluidic Wells., Jacob Hunter West

Electronic Theses and Dissertations

The frequency dependence of electrokinetic particle trapping using large-area (>mm²) conductive carbon nanofiber (CNF) mat electrodes is investigated. The fibers provide nanoscale geometric features for the generation of high electric field gradients, which is necessary for particle trapping via dielectrophoresis (DEP). A device was fabricated with an array of microfluidic wells for repeated experiments; each well included a CNF mat electrode opposing an aluminum electrode. Fluorescent microspheres (1 µm) were trapped at various electric field frequencies between 30 kHz – 1 MHz. Digital images of each well were analyzed to quantify particle trapping. DEP trapping by the …

Fly Ash Based Geopolymer: Water, Curing Temperature And, Cao Content Effects On Microstructure And Compressive Strength., Lujain Salem

Electronic Theses and Dissertations

Geopolymer, an emerging alternative to Portland cement-based concrete, relies on alumina and silica-rich precursors like fly ash for its formation. Geopolymerization is a chemical process that creates a three-dimensional polymer network by reacting with an alkaline activator. While fly ash's calcium oxide (CaO) content is crucial in its classification, it behaves differently in geopolymerization, where it competes with hydration. Therefore, a better understanding of the impact of CaO content in fly ash on geopolymerization is needed to effectively utilize fly ash. This study investigates the effects of CaO content, water, and curing temperature on geopolymerization. Using fly ash from a …

Attention Guided Data Augmentation For Improving The Classification Performance Of Vision Transformers., Nada Baili

Electronic Theses and Dissertations

For over a decade, Deep Neural Networks (DNNs) have been rapidly progressing and achieving great success, forming a robust foundation of state of the art machine learning algorithms that impacted various domains. The advances in data acquisition and processing have undeniably played a major role in these breakthroughs. Data is a crucial component in building successful DNNs, as it enables machine learning models to optimize complex architectures, necessary to perform certain difficult tasks. However, acquiring large-scale data sets is not enough to learn robust models with generalizable features. Instead, an ideal training set should be diverse enough and contain enough …

Context Dependent Training Data Selection For Automatic Target Detection., Tylman Michael

Electronic Theses and Dissertations

An Automatic Target Detection (ATD) algorithm is capable of identifying the location of targets of interest captured by Infra-Red imagery in vastly different contexts. ATD is often a precursor in a 2-stage methodology in order to ascertain the location and nature of a target in both military and civilian applications. In order to train an ATD algorithm, a large amount of data from varied sources is required. One drawback of this requirement is that some sources of data may harm the performance of the method in different contexts. This thesis explores utilizing an unsupervised method to identify a subset of …

Multithreaded Applications On The Heterogeneous Research Computing Environment., Sungbo Jung

Electronic Theses and Dissertations

Bioinformatics is a domain that has experienced rapid research growth in recent years, as evidenced by the increasing number of articles in biomedical databases such as PubMed, which adds over a million publications every year. However, this also poses a challenge for researchers who need to find relevant citations for their work. Therefore, developing efficient indexing and searching methods for text data is crucial for Bioinformatics. One key technique for information retrieval is document inversion, which involves creating an inverted index to enable efficient searching through vast collections of text or documents. This Ph.D. research aims to design the research …

Development, 3d Printing, And Sintering Of Aluminum-Magnesium Alloy Pastes For In-Space Manufacturing Applications, Fatou Ndiaye

Electronic Theses and Dissertations

This study explores the additive manufacturing process of paste printing, sintering, and de-binding for fabricating aluminum-magnesium alloy components. The paste formulation involved combining aluminum powder with varying magnesium concentrations, utilizing acrylic polyol, solvent, and plasticizer to create a homogeneous mixture. Printing parameters were optimized to ensure continuous pressure for improved extrusion. Sintering conditions involved incremental temperature increases with nitrogen flow to remove solvents. Density measurements, tensile tests, and shrinkage calculations were conducted to assess part quality post-sintering. The study revealed significant improvements in part quality with 5 wt.% magnesium incorporation within aluminum, although density and tensile strength fell short of …

Mechanical Property Simulations Of Ploybenzimidazole Membranes., Blake Alexander Clark

Electronic Theses and Dissertations

This work explores mechanical properties of membranes made of polybenzimidazole utilizing molecular simulations. These simulations researchers to narrow down polybenzimidazole membrane compositions to viable candidates. These simulations are quicker than current purely experimental methods. The increase in throughput would be achieved by eliminating compositions that have unfavorable mechanical properties through preliminary simulation work before moving onto experimental methods. Determining polybenzimidazole membranes’ mechanical properties experimentally would, therefore, allow for researchers to speed up research in areas such as fuel cells and electrolyzers that make use of polybenzimidazole membranes. This study uses Materials Studio and the COMPASS III forcefield to perform these …

Mems Optical Cavities For Low Power Communication., Jacob Schopp

Electronic Theses and Dissertations

This thesis discusses the use of MEMS (microelectromechanical systems) optical cavities for use in low power communication. MEMS optical cavities are thin air gaps between an actuated MEMS mirror and a fixed glass encapsulation. By moving the MEMS mirror the reflectivity of the MEMS optical cavity can be changed. This change in reflectivity can be used to transmit information passively by modulating reflected light intensity instead of generating new light using a light source. These MEMS optical cavities are demonstrated using optical fibers for illumination delivery and reflected light collection. In addition to being reflected for communication, the illuminating light …

Barocaloric Heat Pumps Based On Soft Materials., Naveen Weerasekera

Electronic Theses and Dissertations

Solid-state refrigeration offers a promising alternative to traditional vapor compression systems that are relatively inefficient, unreliable, and have a high global warming potential. Various solid-state cooling technologies, including those based on electrocaloric, magnetocaloric, and elastocaloric effects have been investigated in the recent past. However, concerns regarding their efficiency, scalability and cost remain. Refrigeration and heat pump technologies based on the barocaloric effect (temperature/entropy change due to hydrostatic pressure) hold great promise but have received comparatively less attention. Barocaloric heating/cooling based on low cost, compressible soft materials with large barocaloric response have the potential to pave the way for efficient, scalable, …

Four-Way Cfd-Dem Coupling To Simulate Concrete Pipe Flow: Mechanism Of Formation Of Lubrication Layer, Tooran Tavangar, Masoud Hosseinpoor, Jeffrey S. Marshall, Ammar Yahia, Kamal H. Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study introduced a four-way CFD-DEM coupling approach to simulate the shear-induced particle migration (SIPM) mechanism leading to formation of the lubrication layer (LL) during concrete pumping. The CFD-DEM simulations considered the coupled effect of concentration (10 %–40 %) and wide size distribution (1–17 mm) of aggregate and rheology of the mortar for forces between the suspending matrix and the particles (and vice versa), as well as force transmission directly between particles (and the pipe wall). The formation of the LL was successfully simulated through a more realistic understanding the SIPM mechanism and rheological evaluation across the pipe with comparable …

Revealing The Three-Dimensional Arrangement Of Polar Topology In Nanoparticles, Chaewa Jeong, Juhyeok Lee, Hyesung Jo, Jaewhan Oh, Hionsuck Baik, Kyoung-June Go, Junwoo Son, Si-Young Choi, Sergey Prosandeev, Laurent Bellaiche, Yongsoo Yang

Physics Faculty Publications and Presentations

In the early 2000s, low dimensional ferroelectric systems were predicted to have topologically nontrivial polar structures, such as vortices or skyrmions, depending on mechanical or electrical boundary conditions. A few variants of these structures have been experimentally observed in thin film model systems, where they are engineered by balancing electrostatic charge and elastic distortion energies. However, the measurement and classification of topological textures for general ferroelectric nanostructures have remained elusive, as it requires mapping the local polarization at the atomic scale in three dimensions. Here we unveil topological polar structures in ferroelectric BaTiO₃ nanoparticles via atomic electron tomography, which …

Opening The Black Box: Towards Inherently Interpretable Energy Data Imputation Models Using Building Physics Insight, Antonio Liguori, Matias Quintana, Chun Fu, Clayton Miller, Jérôme Frisch, Christoph Van Treeck

Research Collection College of Integrative Studies

Missing data are frequently observed by practitioners and researchers in the building energy modeling community. In this regard, advanced data-driven solutions, such as Deep Learning methods, are typically required to reflect the non-linear behavior of these anomalies. As an ongoing research question related to Deep Learning, a model's applicability to limited data settings can be explored by introducing prior knowledge in the network. This same strategy can also lead to more interpretable predictions, hence facilitating the field application of the approach. For that purpose, the aim of this paper is to propose the use of Physics-informed Denoising Autoencoders (PI-DAE) for …

Survival After Ditching In Motorized Aircraft, 1989-2022, Douglas D. Boyd, Volker C. Schick, Catherina Hippler, Jochen Hinkelbein

Publications

INTRODUCTION: Although an unintended aircraft landing on water (referred to as ditching) is a rare event, the potential for occupant injury/fatality increases immediately following the event due to adverse conditions. However, to date, few studies have addressed the subject. Herein, ditching events and post-ditching survival were investigated.

METHODS: Ditchings (1982–2022) in the United States were identified from the National Transportation Safety Board database. Occupant injury severity, aircraft type, pilot experience, flight conditions, and number of occupants were extracted. Poisson distribution, the Chi-squared test (2-tailed), Mann-Whitney U test, and Kruskal-Wallis one-way analysis of variance were employed.

RESULTS: A total of 96 …

Cloud Computing Integration Into Mixed-Reality: Physical To Abstraction, Yassine Chahid, Patrick Slattery

Publications and Research

This research evaluates the progression of cloud computing and mixed-reality technologies, and to identify how these technologies influence advancements in the latter. Both cloud computing and mixed reality have significantly impacted the IT field and the services available to the public and various institutions. Cloud computing provides a valuable way to process information or allocate computational resources on otherwise limited hardware. Augmented or virtual reality hardware would greatly benefit from this by offloading resource-intensive tasks to other machines. The research methodology involves analyzing essential components of both innovations, divided into multiple categories. These components range from physical, hardware-based elements to …

Improving Static Cold Storage Life Of The Human Heart Before Transplant, Juan Sebastian Rodriguez Paez

Theses and Dissertations

Organ storage and transportation are critical steps for the success of organ transplantation. Static cold storage (SCS) of hearts for heart transplantation (HTx) remains the standard approach. However, SCS may involve damage to the tissue resulting from extended hypothermic preservation, potentially affecting organ viability. More over, the temperature distribution on and within the heart is unknown during heart transplantation. Therefore, there is an interest to study different stages of the heart transplantation process towards determining the 3D temperature distribution on and within the heart. There could be a possibility of having a hypothermic injury in different parts of the heart …

Methodologies For Optimization And Surface Heat Flux Estimation For Hybrid Thermal Protection Systems, Syed Arafun Nabi

Theses and Dissertations

Thermal protection system (TPS) plays a pivotal role in safeguarding space vehicles from extreme aerothermal heating during atmospheric entry. To ensure effective thermal management, Hybrid Thermal Protection seamlessly integrating both active and passive TPS is an innovative solution. The passive TPS consists of an insulative layer on vehicle skin to counteract the aerothermal heat. Although a thicker layer enhances insulation, a trade-off arises between the thickness of the passive layer and the spacecraft’s weight. Beneath the passive TPS layer lies the active TPS functioning as a heat exchanger where the vehicle fuel liquid is considered as coolant. The effectiveness of …

Artificial Neural Networks As The Solution Of Inverse Heat Conduction Problems In Multidimensional Domains, Andrea Carolina Martinez Mundarain

Theses and Dissertations

Surface heat flux measurement is essential in various industrial applications including atmospheric entry of space vehicles, machining processes, non-destructive testing and more. While direct measurement of surface heat flux is known to be a very difficult, if not infeasible, task, acquiring temperature measurement from sub- surface locations are often viable. The problem of evaluating the surface heat flux using internal temperature measurements is known as an inverse heat conduction problem (IHCP). IHCPs are considered as mathematically ill-posed as they are highly sensitive to measurement error. This research presents a solution based on the implementation of artificial neural networks (ANNs) to …

Synthesis Of Durable Zeolite 13x Insertion Coatings And Scaled-Up Experimental Demonstration For Co2 Capture, Daniel Jamil Hocheimy

Theses and Dissertations

Minimizing the energy requirement for capturing carbon dioxide (CO₂) from post-combustion sources is critical to efficient industrial decarbonization and subsequent mitigation of the effects of climate change. The current portfolio of CO₂ capture technologies includes absorption, membrane separation and packed bed adsorption, which suffer from high energy and temperature requirements, scalability, and location dependency issues. Adsorption-based systems could cater to these concerns; however, their current embodiments primarily use packed adsorbent bed design and electricity-driven vacuum pumps to regenerate them. While simple and easy to fabricate, these designs are not scalable and cannot use heat to regenerate them …

Progress In Selective Laser Sintering Ofmultifunctional Polymer Composites For Strain- And Self-Sensing Applications, Muhammad Umar Azam, Imane Belyamani, Andreas Schiffer, Shanmugam Kumar, Khalid Askar

All Works

Recent decades have witnessed significant advancements in additive manufacturing (AM) of polymer composites, leading to the development of material systems with intricate architecture and composition. Selective laser sintering (SLS), among various AM methods, offers numerous advantages such as high mechanical strength in printed parts, recyclability of unused powders, and the ability to print large batches without support structures. Moreover, SLS has remarkably succeeded in fabricating electrically conductive polymer composites (ECPCs) with exceptional functional performance which is attributed primarily to the formation of a segregated filler network along the powder particle boundaries. This review aims to delve into SLS for processing …

Data Recovery Beyond The Obvious Using Digital Forensic Techniques, Smit Chandrakant Nayak

Theses, Dissertations and Culminating Projects

Advancement in drone technology, particularly for smaller drones, are creating new research fields and potential applications, particularly with regard to smaller drones. On the other hand, these enhancements bring forth additional hurdles in terms of adaptability, homogeneity, and safety. The purpose of this study is to investigate the science and technology behind drones, as well as their applications, the many ways in which citizens implement them, and the risks, precautions, and privacy problems that are associated with their utilization. This article discusses the existing literature, as well as the available solutions for drone cybersecurity, the security challenges related with drones …

High Performance Silicon Carbide Based Converters For Powertrain Electrification, Nan Lin

Graduate Theses and Dissertations

With the increasing concern towards environment protection, electric vehicles (EVs) and hybrid electric vehicles (HEVs) have become popular in recent years. They not only help reduce carbon emissions, but also come with other benefits such higher efficiency and better user experience. Many countries and vehicle manufactures have made their plans to keep up with this trend in vehicle electrification. Powertrain is an assembly of components in a vehicle that pushes it forward. As for EVs and HEVs, their powertrains are composed of one or more power electronics converters, which are significant to the system. Silicon carbide MOSFETs have shown superior …

Synthesis Of Bimetallic Nickel And Cobalt Phosphide Nanostructures For Electrocatalysis, Sarah Meixin York

Graduate Theses and Dissertations

Transition metal phosphides have become a new class of materials to be considered as promising catalysts for a number of applications including electrochemical hydrogen evolution (HER). Electrocatalysis in hydrogen evolution is a heavily studied field due to the increasing desire to develop more efficient and more cost-effective catalysts for clean hydrogen production. This project develops a chemical approach to synthesizing bimetallic cobalt-nickel phosphide nanostructures for their use in HER. The synthesis is accomplished by thermal decomposition of the metal precursors in the presence of carbon monoxide (CO) and trioctyl phosphine (TOP). The resulting nanostructures were characterized using transition electron microscopy …

A 10 Kv Sic Mosfet Power Module With Optimized System Interface And Electric Field Distribution, Xiaoling Li

Graduate Theses and Dissertations

This dissertation introduces a holistic and systematic design methodology tailored to the 10 kV silicon carbide (SiC) MOSFET power modules to achieve multi-objective optimization with enhanced electric-field (E-field) distribution, minimized common-mode (CM) parasitic capacitance, and reduced system-level parasitic inductances. The proposed approach encompasses two innovative techniques: 1) an electric-potential-oriented module-system interface to reduce system-level parasitic inductance while maximizing insulation capability; 2) stacked substrates with patterned middle layer copper to alleviate the E-field concentration at the triple-point and reduce the maximum E-field without compromising on thermal resistance. The effectiveness of these innovative approaches is substantiated through the development of a 10 …

Towards Side-Channel Infrastructure For Software Implementations Of Pqc Algorithms, Tristen Teague

Graduate Theses and Dissertations

Post-Quantum Cryptography (PQC) is a new class of asymmetric cryptography algorithms that are supposed to be secure against both classical computers and quantum computers through Shor’s algorithm. Since PQC algorithms are currently being standardized, they will replace older standardized asymmetric algorithms (such as RSA) and will be deployed within the digital infrastructure. Before implementations of the PQC algorithms are placed into the infrastructure, they must undergo evaluation of both performance and security. One such security issue that needs large investigation before deployment are side-channels. Side-channel attacks (SCA) are a method of gathering information from the implementation, such as power-consumption and …

Design And Implementation Of High-Frequency Dc-Dc Converters For Ev Applications, Rahul Biswash

Graduate Theses and Dissertations

The power electronics industry has been revolutionized by introducing wide bandgap semiconductor devices, such as Silicon Carbide (SiC) and Gallium Nitride (GaN). Due to their high frequency, high temperature, and high voltage operating capabilities, wide bandgap devices boast significant improvements in power density, efficiency, and reliability, as evidenced by their ability to decrease the size of power converters by operating at higher frequencies, temperatures and voltages, use of smaller and less passive components, such as transformers, inductors and capacitors, which makes power converters more compact and light-weight, ideal for space and weight-constrained applications, and compatibility with a wide range of …

Bidding Strategy For A Wind Power Producer In Us Energy And Reserve Markets, Anne Stratman

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Wind power is one of the world's fastest-growing renewable energy resources and has expanded quickly within the US electric grid. Currently, wind power producers (WPPs) may sell energy products in US markets but are not allowed to sell reserve products, due to the uncertain and intermittent nature of wind power. However, as wind’s share of the power supply grows, it may eventually be necessary for WPPs to contribute to system-wide reserves. This paper proposes a stochastic optimization model to determine the optimal offer strategy for a WPP that participates in the day-ahead and real-time energy and spinning reserve markets. The …

Vr Circuit Simulation With Advanced Visualization For Enhancing Comprehension In Electrical Engineering, Elliott Wolbach

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

As technology advances, the field of electrical and computer engineering continuously demands innovative tools and methodologies to facilitate effective learning and comprehension of fundamental concepts. Through a comprehensive literature review, it was discovered that there was a gap in the current research on using VR technology to effectively visualize and comprehend non-observable electrical characteristics of electronic circuits. This thesis explores the integration of Virtual Reality (VR) technology and real-time electronic circuit simulation with enhanced visualization of non-observable concepts such as voltage distribution and current flow within these circuits. The primary objective is to develop an immersive educational platform that makes …

An Investigation Of Information Structures In Dna, Joel Mohrmann

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

The information-containing nature of the DNA molecule has been long known and observed. One technique for quantifying the relationships existing within the information contained in DNA sequences is an entity from information theory known as the average mutual information (AMI) profile. This investigation sought to use principally the AMI profile along with a few other metrics to explore the structure of the information contained in DNA sequences.

Treating DNA sequences as an information source, several computational methods were employed to model their information structure. Maximum likelihood and maximum a posteriori estimators were used to predict missing bases in DNA sequences. …

Physical And Stochiometric Controls On Nutrient Uptake And Ecosystem Respiration In Contrasting Sites, Jancoba K. Dorley

Civil Engineering ETDs

Meteorological, hydrological, and biogeochemical processes naturally control stream ecosystems. These processes define the frequency and distribution of precipitation and the supply and demand of solutes and particles to support aquatic food chains through space and time. Studies have also found that stream ecosystems are also controlled by anthropogenic activities, which occur on a much shorter timescale. These anthropogenic activities affect stream ecosystems' structure and function from local to planetary changes to the environment. It is essential for scientists and engineers to understand the relationships between naturally occurring processes and those created by human activities for a better interpretation of stream …