Engineering Commons^™

An Installation Of An Experimental Joint For Concrete Pavements, Harvey J. Field Jr.

Kentucky Transportation Center Research Report

The experimental joint described in this paper involves the use of a new type load transfer set-up which was developed by the Oxford Manufacturing Company, Oxford, Indiana, and produced by the Reynolds Metals Company. The producers designed this apparatus on the assumption that the present joints used in concrete pavement construction are not adequate. For example, from the standpoint of load bearing, the dowel bars which theoretically carry the load from one slab to the other are not sufficient in that the very shape of the bars (circular) allows only a limited bearing surface. In order to eliminate the rusting …

Determination Of Unit Weights Of Aggregates In The Laboratory And At The Source, S. T. Collier

Kentucky Transportation Center Research Report

As a result of meetings with producers, a committee of Highway Department engineers recommended that a study be made of various type of aggregates from statewide sources; the objective being to arrive at a standard of evaluating unit weight of aggregates of various but commonly recognized characteristics. It was further desired that a factor be determined which could be applied to a given aggregate for computing its unit weight with reasonable accuracy; taking cognizance of specific gravities and densities as influenced by particle shapes and gradation.

Field Resolution Tests With The Metrogon Lens, Robert Greig Livingston

Professional Degree Theses

"The first portion of this treatise is devoted to a compilation of general knowledge concerning photographic resolution testing - an explanation of certain optical terms; the drafting of resolution targets; methods for averaging resolution values, measured at various positions on the format, to obtain one over-all value for an exposure; and a description of the factors involved in conducting the photographic operations. In the second part of the paper, analyses of the results obtained from line-target resolutions are made with the purpose of determining those combinations of aperture, filter, and shutter speed which result in high photographic resolutions. This information …

Experimental Studies Of The Effect Of Moisture On Strength Of Mine Roof-Shales, Rolf W. Roley

Professional Degree Theses

"The mining and production of coal by underground mining operations has long been recognized as one of this nation's most hazardous industries. Tabulated data from the State of Illinois, for example, reveal that in that State between 1882 and 1945 there have been 7,789 men killed in coal mining accidents of one form or another. Further inspection of the data indicates that 3,711 of these men were killed underground by falls of roof or rock….

As previously stated, this experiment was designed to determine whether or not any appreciable change in strength as measured by Transverse Breakage would result from …

Development, Application And Operating Results Of The Center Peripheral Discharge Rod Mill, David Porter Hale

Professional Degree Theses

"The use of a rod mill for producing manufactured sand is not a recent application. A Marcy Open End Rod Mill has been operating at the plant of the Sun Sand Company, Thayer, West Virginia, since 1925. In early 1940 an 8' x 12' rod mill of the open end type was installed at Shasta. Dam, near Redding, California for sand production. In 1942 work began on Fontana Dam, a Tennessee Valley Authority Project on the Little Tennessee River. The flow sheet included two 9' x 12' high discharge rod mills driven by a single 800 H.P. motor. All of …

An Application Of Skew Frequency Curves To River Stages, Vernon A. C. Gevecker

Professional Degree Theses

"Floods have occurred in the past and will occur again in the future. References to floods are incorporated in some of the early writings of man. Unfortunately though man has recorded the event, he has seldom recorded facts whereby it is possible to determine the volume of flow or the height to which the water rose. Where man has recorded the height to which water rose, much data such as channel conditions, vegetation coverage on the flood plain, etc., remains vague or unknown.

It has been only in comparatively recent times with the advent of the steamboat that man has …

Analytical Investigation Of Bending Effects On The Stability Of A Tube Subjected To External Pressure, Charles Young

Masters Theses

"The behavior of thin and moderately thick-walled tubes under various types of loadings has been a major problem of several leading industries for many years. Predominant among these, and the one for which this thesis was primarily undertaken, is the oil industry. The problem attacked in this thesis, however, is not limited to that industry alone, having ample application in industries that are sub-marine in nature, or any industry in which the application of external pressures on equipment is likely to be responsible for buckling failures...In this thesis, the problem of finding the effect of bending on the collapsing pressure …

The Volatility Of Metallic Sulfides And Their Treatment By Vacuum Metallurgy, Chi-Mei Hsiao

Doctoral Dissertations

"The purpose of this investigation is to determine the vapor pressure or volatility of the sulfides of the following metals by Langmuir's method: a) Zinc b) Cadmium c) Mercury d) Manganese e) Tin f) Lead g) Arsenic h) Antimony i) Molybdenum J) Iron k) Cobalt l) Nickel m) Copper n) Silver o) Calcium p) Aluminum.

The relation of this property to the position of the metals in the periodic table will be discussed, thus the vapor pressure or volatility of the remaining metals can be predicted as to the order of magnitude if the law of periodicity holds.

The possible …

Prefabricated Neoprene Joint Sealer, A. C. Peed Jr.

Kentucky Transportation Center Research Report

On November 18, 1948, the assembly of joints with prefabricated neoprene sealers was demonstrated by representative of the Lastite Joint Company, 105 W. Madison Street, Chicago 2, Illinois, on the construction project on U.S. 27, about 5 miles south of Alexandria. Installation was not possible at that time due to the fact that the contract was temporarily without cement.

Installation was made on November 30, 1948, under the supervision of a representative of the company. This installation was not completely satisfactory due to the inexperience of the paving crew with this type of joint. The joint at Station 622÷22 was …

Relative Productive Value Of Land, Karl Harris, Vaughn E. Hansen

Reports

Location, markets, hard surface roads and other transportation facilities, churches, taxes, schools, and utilities are major factors in the monetary value of land, yet these things do not contribute to the land’s productivity. In this bulletin the only factor considered in determining the agricultural value of land is its productive capacity.

The three major factors in the productive value of land are water, climate, and soil.

These three factors are the principal ones in crop production. If any one of them is unfavorable to plant growth, it can inhibit or even prevent plant growth regardless of how favorable the other …

Test 441: Mccormick-Deering Wd-9, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT:

TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear.

This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker, point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated.

BELT HORSEPOWER TESTS

TEST B: The throttle …

Advertising Brochure: Minneapolis-Moline Comfort Tractor, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Advertising Brochure: Allis-Chalmers , Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 450: Oliver Row-Crop 88 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Advertising Brochure: Case W-9, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Effects Of A Reverse Order Of Firing Using Millisecond Delay Electric Blasting Caps In A Quarry Operation, Reginald John Jones

Masters Theses

"Evidence of the steady increase in the production of quarries is a reflection of the improved blasting practices that are being used. New explosives, the new millisecond electrical blasting caps and the endless experimentation carried on by both manufacturer and operator continue to aid or better the old methods of quarry blasting. In many instances the better results were obtained from practices hitherto unknown or at least unused. This report describes the results obtained from comparing quarry rounds shot in the accepted firing order and those shot in the reverse order of firing. The purpose of the report is to …

Principles And Practices Controlling The Use Of Earthmoving Equipment, Woodrow John Latvala

Masters Theses

"The purpose of this study is to show how the efficiency in earthmoving projects can be increased by the application of engineering principles. Efficiency can be increased by choosing equipment to fit the given set of conditions; and, having chosen the equipment, operate it at its maximum efficiency. In order to choose the right equipment it is necessary to study the conditions under which the equipment must operate. It is then necessary to study the machine in order to ascertain its adaptability to the existing conditions"--Introduction, page 1.

The Economic Spacing Of Contraction Joints In Reinforced Concrete Pavements, Wilbert Frederick Wegener

Masters Theses

"Structurally, there are two types of joints used in concrete pavements: (a) the tied, or permanently-closed joint; and (b) the open or free type of joint. The permanently closed joint utilized tie-steel of some form to keep the joint from opening. Usually, this steel is in the form of short individual bars extending across the joint and bonded to both slabs (designated as "tie-bars") or in the form of distributed reinforcement. The remaining method of classification, that of refering [sic] to the joint purpose, gives the expansion joint, contraction joint, and warping joint. An expansion joint is, as the name …

Efficiency Studies Of The Effect Of Moisture On The Power Consumption Of Mine Scrapers, Georges J. Vigier

Masters Theses

"Many years of practice have resulted in the standardization of several types of scrapers which are now commonly manufactured for use in mining. Although experience has brought out much information on scraping operations, no systematic studies of the efficiency of mine scrapers have been carried out before the experimental works done in the last few years at Missouri School of Mines and Metallurgy. "Purpose of Problem": The purpose of this present study is to consider the effect which moisture in the muck has on the efficiency as regards power consumption and amount of material scraped, of different types of mine …

Calculations Of Maximum Sag Of A Transmission Line With An Ice Load On One Span, Rodney A. Schaefer

Masters Theses

"An important problem concerning electric power lines is the calculation of the maximum sag occurring when there is an ice load on only one span. The object of this thesis is to determine a practical method for calculating the maximum sag of a transmission line, suspended on suspension insulators, with the aforementioned loading conditions. This paper is limited to the case where the supports of the transmission line are at equal elevations and all span lengths are equal"--Introduction, page 1.

Economical Span Length Ratios For Three-Span Continuous Girder Bridges, Donald Hindrik Timmer

Masters Theses

"The three-span continuous bridge is one of the most popular bridges used by highway departments at the present time. The low first cost and overall economy combined with the pleasing appearance of this type of bridge as compared to simple span structures has led most highway departments to use continuous spans whenever conditions permit. The design of three-span continuous bridges, as well as the design of any of the other bridge types, is usually carried out as an analysis rather than a design. In the case of the three-span continuous girder, with rolled steel beams, an initial assumption as to …

A Study Of Mine Scraper Efficiency On Materials Of Different Specific Gravities, Kermit Guy Rowley

Masters Theses

"The purpose of this study is to determine the effect that the specific gravity of the material scraped has on the power consumption and the efficiency of the common types of mine scrapers. As scraper weight, rope speed, and moisture content of the muck are important factors affecting the power consumption and efficiency, these variables are the ones considered for each type scraper. Two materials of different specific gravities are used in the study with an equal number of tests run on each material"--Introduction, Purpose of Problem, page 2.

A Study Of The Efficiency Of Split-Second Delay Electric Blasting Caps In Underground Limestone Mining, John B. H. Fitzwilliam

Masters Theses

"The introduction of electric blasting caps have delay intervals of the order of one-half to one second proved of advantage in many aspects of underground mining, particularly development work. Their use spread, until they now supersede fuse-and-cap firing wherever possible. Split-second delay electric blasting caps are a comparatively recent development from conventional delay caps. They have been found of practicable use in quarrying operations, and have been applied in many phases of underground mining. While evidence, to show that short-delay firing in quarrying is more efficient than instantaneous firing, is becoming increasingly conclusive, it remains to be proved that split-second …

The Study Of Effect Of Definite Grain Sized Sand On The Shearing Strength Of Clays, Faruk Omer Akkoseoglu

Masters Theses

"Slopes of all kinds, including mountains, hills, sea coast bluffs, river banks, and man made cuts and fills, stay in place only because of the shearing strength possessed by the soil or rock of which they are composed. The resistance of soils to shearing strength is probably the most important of all the soil properties to foundation engineers. Most of the serious structural failures which are due to unexpected soil behaviour are caused by deficiency in the shearing strength of the soil. Water, on the other hand, possesses no static strength in shear, therefore bodies of water have no surface …

Hydraulic Scale For Measurement Of Dynamometer And Other Forces, John Richard Barton

Masters Theses

"The object of this investigation is to design, build, test, and develop, a hydraulic type scale primarily to be used for measuring dynamometer forces. The scale however is not limited to use on dynamometers, but may be used for other types of force measurements such as the continuous weighing of material on a conveyor belt in conjunction with a recording pressure gage. The scale has numerous applications in determining forces where conventional scales are now used. This particular subject was chosen because of the need for a convenient, inexpensive, and accurate scale for use in measuring the force exerted by …

The Nature Of Molecular Films Of Oleic Acid On Quartz, Kenneth Lee Keating

Masters Theses

"The purpose of this research was to show the nature of oleic acid on quartz mineral by transferring calcium oleate films, known to be monomolecular and of a definite orientation, to the surface of a piece of quartz, and measuring the resulting coated mineral by contact angle technique"--Introduction, page 1.

A Comparative Study Of Some Rock Drill Bits, Charles Roger Knopp

Masters Theses

"The detachable single-use rick-drill bit has attracted considerable attention in the mining industry of the United States during the past few years. While this type of bit has been used for some time in other countries, it has been only recently that these bits have been manufactured in the United States. It was decided to test this type of bit and make a comparative study of a single-use bit and a widely used detachable rock-drill bit"--Introduction, page 1.

Effects Of Sand Admixtures On The Physical Properties Of Soils, Necati Kanatsiz

Masters Theses

"The purpose of this study is to determine the effects of sand admixtures on the physical properties of soils. Soil may be defined as a heterogenous [sic] collection of rock and mineral fragments whose decomposition and disintegration have been brought about by the action of physical, chemical, and biological forces, working singly or in combination...In the conviction that the study of soils, with respect to highway engineering, is becoming more and more important this study was undertaken in order to learn whether the addition of sand would lead to desirable results, and if not, at least secure some further addition …

The Theory Of Limit Design As Applied To Column Analysis, John Francis Mccarthy

Masters Theses

"In any discussion of compression members of a structure, account has to be taken primarily of the relative "slenderness" or bending weakness of the member. If the member be so short that axial loading causes very slight deflection at any point throughout the member, it is usually designated a simple compression member and no account is taken of the additional stresses due to the deflection. When, however, the ratio of the length to the least radius of gyration of the member becomes so large that bending stresses cannot be ignored, the member is usually called a column and its consequent …

Periodic Heat Flow In A Semi-Infinite Solid, Warren George Heidbrier

Masters Theses

"The object of this investigation is to determine by analytical means the temperature within a homogeneous semi-infinite solid, as a function of time, while the solid is receiving heat periodically by radiation on its one flat surface. Periodic heat flow means that heat flow is a continuous function of time and repeats itself at regular intervals. A semi-infinite solid has only one bounding plane and extends to infinity in all other directions...Much of this work deals with the soil temperatures of the earth both at the surface and at various depths. The surface of the earth is subjected to daily …