Engineering Commons^™

Proposed Specification Class I, Type C And Blade Spreading Hot Mixes, L. E. Gregg

Kentucky Transportation Center Research Report

Following the May 24, meeting of the Specifications Committee you and I discussed briefly some diagrams showing the comparative gradation between other mixes and the proposed Class I, Type C, surface mix, and you asked that we prepare some information for members of the Specifications Committee showing the effect of the proposed limits, In the process of doing this He accumulated data on mixes used by some other states, and gradations of some mixes that have been used here in our state. Finally, some data on blade spreading of hot mixes in Houston, Texas were obtained by correspondence, This memorandum …

An Investigation Of Lean Concrete Mixes As Base Courses For Bituminous Surfaces [Jan. 1951], S. T. Collier

Kentucky Transportation Center Research Report

Cement concrete bases for pavements with bituminous surfaces are, of course, not new. However, it has been many years since concrete has served this purpose except as a pavement itself ultimately resurfaced after years of service. The outstanding qualities of many roads which developed in this way were obvious without any particular tests, and for many years there apparently was no attempt to evaluate them. Probably structural value was first investigated in tests on airfields in Florida, Ohio and California. Although the original concrete pavements in all cases were heavy in comparison with highway sections, the results of the tests …

Observations On Seal Coats, Tack Coats And Penetration Macadam Construction In 1950, William B. Drake

Kentucky Transportation Center Research Report

Early in the 1950 construction season the Division of Design requested that the Research Division observe some new methods and materials that were being used in bituminous construction. The projects chosen in most cases represented several of the type throughout the state. There were some instances though where the procedure or material was used in only one project.

The purpose of this investigation was to determine the effectiveness of the materials and the methods which were being used. The nature of this study required that only visual inspections be made. Particular emphasis in this report is placed upon observations of …

Test 458: Mccormick Farmall Super C, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 467: Oliver Row-Crop 66 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test .463 :Allis Chalmers Hd-9, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test. 468: Minneapolis-Moline R, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Recovering Oil From An Unconsolidated Sand By Means Of Combustion, David K. Anderson

Masters Theses

"For many years, there has been talk expressing great concern about the oil reserves in the United States. Every four or five years, articles are published stating that we are running out of oil and our proved reserves, to date, are only adequate, at our present rate of consumption, for about 20 years. While this is true, it does not leave us with the complete picture. The industry in the past 20 years has never had more than a 20 year reserve. It must be said, however, that it is becoming more difficult with each passing year to find oil …

Stress Analysis Of Thin Bedded Mine Roofs Subjected To Evenly Distributed Lateral Load And Supported By Barrier Pillars, Sahap Sakip Aybat

Masters Theses

“Theoretical stress analysis in mine structures begins with the assumption that the structural elements are homogeneous, isotropic and perfectly elastic. It is this writers belief that stresses in a mine roof supported by barrier pillars may be compared to those stresses which may be found in a thin plate supported and restrained in the manner similar to such a mine roof. Therefore the stress and moment equations developed for plates are herein applied to mine roofs of limited thickness.

A thin roof bed which is stressed with evenly distributed lateral load and supported with barrier pillars will be regarded as …

Test 462: International Td-6, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 455: Massey-Harris 55, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Air Flow Through Cloth Screening, Kurt Rauf Basakinci

Masters Theses

"The object of this investigation is to obtain an expression whereby flow of air through woven cloth can be predicted with a reasonable degree of accuracy, in terms of the pressure drop across the screen, the density, the viscosity of the air flowing; these latter properties being functions of the pressure and temperature of the air.

The development of an expression from which to predict the relationship between the air flow through a screen and the pressure drop across it without resort to experimental procedure seems to the author to be worthwhile undertaking.

The chief aim of this investigation was …

Investigation Of Stress And Crack Distribution In Concrete Slabs Containing Welded Wire Reinforcement, Joseph H. Senne

Masters Theses

"Concrete is daily becoming more important as a structural material. However, without steel reinforcement, concrete would never have attained such wide use since, being weak in tension, it must be combined with some other material to take the tension stresses and prevent the tension cracks in the concrete from opening an appreciable amount.

One type of steel reinforcement used particularly for footings, beams and columns is known as deformed bar. In this case deformations are placed on the bars at the time of rolling. These deformations act as mechanical anchorage in preventing the bar from slipping, thus allowing it to …

The Effect Of Back Pressure Created By A Venturi Tube On Power Output And Efficiency Of An Internal Combustion Engine, James J. Trace

Masters Theses

"The exhaust pressure against which an engine works affects the amount of pumping losses, the volumetric efficiency and the rate of advance of the flame front during the combustion process.

When the back pressure is decreased to the same pressure as the intake pressure, the amount of negative work done during the exhaust-intake process approaches the positive work done during the process. It can be seen from a PV diagram that it is possible to make this negative work less than the positive work and gain work during the process.

Because of the "15 to 30 degrees” of intake valve …

An Investigation Of Ruthenium As A Possible Ceramic Colorant, John Charles Williams

Masters Theses

"Some portion of almost every writing dealing with the historical development of ceramic products is devoted to describing the application of colors as found on even the most ancient specimens known to exist. A vase bearing the name of an Egyptian king living 5000 B. C. was glazed in green and inlaid with purple. There are many such examples of the utilization of color in ceramics which illustrate to a certain extent the aesthetic tastes of the very earliest and primitive civilizations.

In those early times, only a few elements were known and available that could be used for such …

A Study Of An Industrial Waste Produced In The Manufacture Of Titanox, Kurt H. Frank

Masters Theses

"The problem involved in this thesis is definitely of an industrial nature in that it deals specifically with waste from a plant that is primarily concerned with the manufacture of pigment.

….the plant does have a method of recovering the soluble titanium by returning the overflow from the Dorr thickener to the digestion tanks to dilute (cut) the digestions. However, in the underflow (sewer) there is a tremendous amount of sludge that is sent directly into the nearest stream because of failure to realize something economical to do with it. This sludge contains roughly 30 per cent solids of the …

A Study Of Some Raw Materials For The Manufacture Of Silica Brick, Charles E. Shulze

Masters Theses

"The ability of silica to carry a load to within a few degrees of its melting point and its tolerance for comparatively high concentrations of iron oxide and lime, have enabled it to maintain its position as the number one steelplant refractory. It is estimated that at least half of the volume of refractories used in the steel plant are silica bricks. Consequently the manufacture of silica refractories forms an industry of considerable importance.

Raw materials suitable for the manufacture of silica brick are widely distributed, but only a small number of deposits are used commercially for one reason or …

The Effect Of Temper Carbon Nodule Number On The Physical Properties Of A Malleable Iron, William J. Ruprecht

Masters Theses

"It is known that the number of temper carbon nodules per unit volume of malleable iron has an effect on both the rate of anneal and on the resulting physical properties, but neither have been clearly worked out quantitatively. The purpose of this investigation is to ascertain the effect of temper carbon nodule number on certain of the physical properties of a commercial malleable iron.

Quantitative determinations of the effect of temper carbon nodule number would be essential from a theoretical viewpoint in working out the mechanism of graphtization, and would be useful in commercial practice in showing the most …

Uses And Advantages Of Short Period Delay Blasting Systems In Mining And Quarrying, Irving C. Falk

Masters Theses

"One of the most recent developments in blasting practice is that of applying the principle of short period delay electric blasting. In this type of electric blasting, instead or having all holes fire at one time, each hole or group of holes is a shot in itself. To provide a short period delay, of a few thousandths of a second, between each hole or group of holes, either millisecond (split-second) delay electric blasting caps or a suitable delayed action blasting switch may be used.

Short period delay electric blasting systems were originally developed for use by quarries in or near …

Well Interference In The South Silica Field, Langdon B. Taylor

Masters Theses

"During World War II the Federal Government restricted oil-field drilling in the United States in order to conserve steel. The wartime regulations required 40-acre spacing in most areas. At the close of the war, the Federal drilling restrictions were lifted, and control of oil-well spacing reverted to the several state regulatory bodies. Each of these state agencies was then confronted with this problem: should 40-acre spacing be continued or should pre-war 10- and 20-acre spacing patterns be re-established?

The regulatory authority in Kansas, the State Corporation Commission, ordered an investigation in January, 1946, for the purpose of developing information upon …

The Depression Of Quartz In Sulphide Flotation, William Mcminn Billinghurst

Masters Theses

"The flotation of sulphide minerals from siliceous and calcareous gangue minerals always gives a concentrate that is contaminated to a greater or lesser degree with the gangue minerals, even though the collectors used do not show any appreciable collecting properties for the gangue minerals when they are treated alone. In an effort to reduce the amount of undesirable gangue mineral floated with the concentrate it is the practice to add arbitrary amounts of various reagents such as quebracho, alkali hydroxides, carbonates, silicates, sulphides, phosphates, fluorides, and sulphuric acid which have been found to be advantageous. The mechanism of depression is …

The Relationship Between The Centrifuge Moisture Equivalent And The Vacuum Moisture Equivalent In Soils, Samuel Payton Halcomb

Masters Theses

"Soil is a material that has been formed through the influence of many different natural agencies. The engineer is not so much interested in how the soil was formed, but he does want to know the characteristics of the soil with respect to its use as a structural material. Therefore, the engineer is primarily interested in the physical properties of soils.

Much progress has been made during the past twenty five years in the study of Soil Mechanics, but even today there is a tendency among engineers to think of soil as just a mixture of clay, sand, silt and …

Problems In Theatre Lighting And Pre-Selective Elctronic Lighting Control, Hasan Orhan Aker

Masters Theses

"Until the recent years, because of the lack in technical know-how of play producers and on the other hand the limited knowledge of the engineers about stage technique, all the advantages provided by efficient stage lighting could not be exploited. Especially, the different problems encountered from the point of view of lighting control, could not be solved for a long time.

It has been proven from theatres built lately, that the stage lighting designs made without a thorough study of the various stage conditions and requirements lead to a tremendous increase in cost and also inefficient operation of the whole …

The Reactions Of The Sodium-, Potassium-, And The Lithium Tungsten Bronzes In The Solid State, Keki Khodadad Irani

Masters Theses

"The first part of this dissertation has the intention of determining whether MoO₃ forms solid solutions with Na-W bronze corresponding to the formula NaWO_3(1-x) (MoO₃)_x and whether the so-called “sodium-molybdenum bronze” exists.

The next part is concerned with the solubility of K-W bronze in Li-W bronze at high temperatures, in a vacuum, and the last part or this work has the intention of studying the solubility of K-W bronze in Na-W bronze at different temperatures.

The interest in this work is of a purely scientific nature rather than of academic interest"--Introduction, page 1.

Bauxite Versus Diaspore Clay In High Alumina (70%) Refractory Brick, Bhikhubhai Mahadeo Sedalia

Masters Theses

"The last twenty five years have seen a remarkable change in the character and types of refractories for furnace construction. Not much more than a few years ago, the production of refractories consisted almost solely of fireclay and silica shapes. A few high alumina bricks were made from Missouri diaspore clays or from bauxite and fire clays. At a later date, although little used, high alumina refractories were available which were made from alumina of a higher degree of purity, by the fusion process. Today refractories covering the entire range of composition from about 98% SiO₂ to 99 1/2% …

Highway Construction And Maintenance Equipment With Machine And Automotive Repair Shops For The Reconstruction Of The Highways Of The Iv Division, Ankara, Turkey, Steve Theodorides

Masters Theses

"With the rapid advancements being made in travel and communication facilities today, the world is steadily growing smaller and people in the far places of the world are no longer strangers.

There is no doubting the importance of tractors, dozers, scrapers, power shovels, graders, bituminus construction equipment, aggregate handling, etc., in the present-day world, in aiding the progress of civilization and bringing to all people the good things of life.

It must be remembered that money expended for highways is not wasted, and can be classified as an asset.

In substance, this is a general project for the reconstruction and …

The Design Of An Apparatus For The Study Of Fast And Slow Chemical Reactions Involving Gases And A Kinetic Investigation Of The Catalytic Decomposition Of Silver Oxide, Hilbert Walter Crocker

Masters Theses

"An outstanding chemical engineer has stated that chemical kinetics is at present in a state similar to that of thermodynamics thirty years ago. The current situation with respect to thermodynamics and chemical engineering appears to be that a fair number of engineers understand the theory and appreciate the practical value of thermodynamics but are frequently handicapped in its use by a lack of data. This is especially true where data on material at extreme temperatures and pressures are required as in nuclear energy and jet propulsion development. The current situation with respect to chemical kinetics and chemical engineering is that …

Increased Stripper Well Recovery By Means Of High Voltage Electrical Heating, John Curtin Schratwieser

Masters Theses

"The purpose of this work is to investigate the possibility of using high voltage electrical heating to obtain increased stripper well production.

A substantial portion of the oil produced in the United States is obtained from stripper wells. These wells reach their economic limit when they can no longer produce sufficient oil to justify the cost of operation. In the majority of cases, however, there is still a high percentage of oil in the sand. If a production stimulus of sufficient magnitude is introduced into the formation, oil, otherwise nonproducible, may be recovered. It is the writer’s thesis that high …

Series Capacitors, Emcet Bilgeer

Masters Theses

"Static capacitors as an element of transmission and distribution circuits first appeared in the form of shunt capacitors. These shunt capacitors were primarily used in power factor correction. They can be regarded as a load in the circuit which draws a loading current. This loading current fleeing through the reactive line produces a voltage rise, thus reducing the voltage drop between sending and receiving ends. This phenomenon helps the voltage control of the feeder as well as power factor correction. The disadvantage of the shunt capacitor is its inflexibility. The shunt capacitor is connected across the line; hence the voltage …

A Survey Of Single Ended Tuned Grid Tuned Plate Class C Power Amplifiers, Chandrakant D. Gandhi

Masters Theses

"The analysis of tuned grid-tuned plate Class C power amplifiers has been treated by many authors in many ways. The methods differ in accuracy and in time required to obtain the end results. A survey of most important of these methods was taken up by the author of this thesis with an aim towards studying their accuracies, advantages and disadvantages. A general survey of this type of analysis has not been found in the literature. In this survey only the most important phases of the tuned grid-tuned plate single ended Class C power amplifiers are discussed.

This survey has been …