Engineering Commons^™

Test 510: Massey-Harris 44 Special, Nebraska Tractor Test Lab

Nebraska Tractor Tests

This report and any related files are made available to the online through the Lester F. Larsen Tractor Test and Power Museum as resources allow. Established in 1998, this museum is located on the University of Nebraska-Lincoln East Campus. It is and appropriately housed within the walls of the historic 1920 Nebraska Tractor Test Laboratory, where the first tractor test was started on March 31st, 1920. Because the pioneer tests became worldwide standards, this location was designated as a Historic Landmark of Agricultural Engineering by the American Society of Agricultural Engineers in 1980, shortly after testing was moved to a …

Test 508: Case 500, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT: TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear. This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker, point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated. BELT HORSEPOWER TESTS TEST B: The throttle …

The Application Of Electric Energy To The Metallurgy Plants In Montana, Edwin J. Duncan

Bachelors Theses and Reports, 1928 - 1970

Since the year 1800, metallurgy has been affiliated with electricity. In fact, the two industries have grown side by side, being naturally dependent upon each other and having a parallel growth.

Test 507: John Deere 50 All-Fuel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT: John Deere 50 All-Fuel TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear. This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker ,point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated. BELT HORSEPOWER TESTS …

Test 506: John Deere 70 All-Fuel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT: John Deere 70 All-Fuel TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear. This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker ,point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated. BELT HORSEPOWER TESTS …

Test 503: John Deere 40, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT: John Deere 40 TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear. This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker ,point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated. BELT HORSEPOWER TESTS TEST …

Army Technical Intelligence Organizations, 1953, Robert Bolin , Depositor

United States Department of Defense Military Intelligence

In 1953, the production of technical intelligence was the responsibility of the chiefs of the Army technical services. The technical services were bureaus in the Headquarters, Department of the Army, each headed by a general. In 1953, the technical Services were:

• The Army Medical Service headed by The Surgeon General
• The Chemical Corps headed by the Chief Chemical Officer
• The Corps of Engineers headed by the Chief of Engineers
• The Ordnance Corps headed by the Chief of Ordnance
• The Quartermaster Corps headed by the Quartermaster General
• The Signal Corps headed by the Chief Signal Officer
• The Transportation Corps headed by …

Test 504: John Deere 40 S, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT: John Deere 40 S TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear. This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker ,point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated. BELT HORSEPOWER TESTS …

Test 505: John Deere 40 C, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT: John Deere 40 C TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear. This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker ,point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated. BELT HORSEPOWER TESTS …

Test 502: Willys Farm Jeep, Nebraska Tractor Test Lab

Nebraska Tractor Tests

This report and any related files are made available to the online through the Lester F. Larsen Tractor Test and Power Museum as resources allow. Established in 1998, this museum is located on the University of Nebraska-Lincoln East Campus. It is and appropriately housed within the walls of the historic 1920 Nebraska Tractor Test Laboratory, where the first tractor test was started on March 31st, 1920. Because the pioneer tests became worldwide standards, this location was designated as a Historic Landmark of Agricultural Engineering by the American Society of Agricultural Engineers in 1980, shortly after testing was moved to a …

Test 501: New Fordson Major, Nebraska Tractor Test Lab

Nebraska Tractor Tests

This report and any related files are made available to the online through the Lester F. Larsen Tractor Test and Power Museum as resources allow. Established in 1998, this museum is located on the University of Nebraska-Lincoln East Campus. It is and appropriately housed within the walls of the historic 1920 Nebraska Tractor Test Laboratory, where the first tractor test was started on March 31st, 1920. Because the pioneer tests became worldwide standards, this location was designated as a Historic Landmark of Agricultural Engineering by the American Society of Agricultural Engineers in 1980, shortly after testing was moved to a …

Test 500: New Fordson Major (Diesel), Nebraska Tractor Test Lab

Nebraska Tractor Tests

This report and any related files are made available to the online through the Lester F. Larsen Tractor Test and Power Museum as resources allow. Established in 1998, this museum is located on the University of Nebraska-Lincoln East Campus. It is and appropriately housed within the walls of the historic 1920 Nebraska Tractor Test Laboratory, where the first tractor test was started on March 31st, 1920. Because the pioneer tests became worldwide standards, this location was designated as a Historic Landmark of Agricultural Engineering by the American Society of Agricultural Engineers in 1980, shortly after testing was moved to a …

Department Of The Army Pamphlet Pam 30-26, A Guide To The Collection Of Technical Intelligence, August 1953, Robert Bolin , Depositor

United States Department of Defense Military Intelligence

This is a detailed, well-illustrated guide showing the range of weapons and equipment army technical intelligence was interested in, including:

• Armored vehicles
• Artillery
• Infantry small arms
• Mortars, antitank weapons, and grenades
• Mines, booby traps, and demolitions
• Ammunition
• Artillery rockets and rocket launchers
• Radio and radar antennas
• Radio transmitters and receivers
• Bridge and stream-crossing equipment
• Construction equipment
• Engineer equipment used in Arctic warfare
• Ordnance equipment used in Arctic warfare
• Quartermaster equipment used in Arctic warfare

Because the descriptions are so detailed and well-illustrated, the pamphlet is a good guide to army technical terms.

When this pamphlet was published the technical intelligence …

News Bulletin - August-September, 1953, Civil Aviation Medical Association

Browse all Civil Aviation Medical Association Newsletters

A three page newsletter of the Airline Medical Examiners Association which was published on an irregular basis from 1950-1957. This organization was a predecessor of the Civil Aviation Medical Association. The newsletter provided news about civil aviation medicine and information related to the organization.

Sediment Movement In Bear River, Utah, Calvin Geary Clyde

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

In the northern part of Cache Valley, Utah, accelerated erosion in recent decades has cut deep gullies of impressive size into the flat, irrigated bench land along the Bear River. Millions of tons of fine sediment have been washed into the river and great amounts have been deposited in the river bed. The resulting flooding and high water-table have caused much damage to the land near the river.

Test 499: Allis-Chalmers Model Wd-45, Nebraska Tractor Test Lab

Nebraska Tractor Tests

This report and any related files are made available to the online through the Lester F. Larsen Tractor Test and Power Museum as resources allow. Established in 1998, this museum is located on the University of Nebraska-Lincoln East Campus. It is and appropriately housed within the walls of the historic 1920 Nebraska Tractor Test Laboratory, where the first tractor test was started on March 31st, 1920. Because the pioneer tests became worldwide standards, this location was designated as a Historic Landmark of Agricultural Engineering by the American Society of Agricultural Engineers in 1980, shortly after testing was moved to a …

Test 498: Intercontinental Model Df, Nebraska Tractor Test Lab

Nebraska Tractor Tests

This report and any related files are made available to the online through the Lester F. Larsen Tractor Test and Power Museum as resources allow. Established in 1998, this museum is located on the University of Nebraska-Lincoln East Campus. It is and appropriately housed within the walls of the historic 1920 Nebraska Tractor Test Laboratory, where the first tractor test was started on March 31st, 1920. Because the pioneer tests became worldwide standards, this location was designated as a Historic Landmark of Agricultural Engineering by the American Society of Agricultural Engineers in 1980, shortly after testing was moved to a …

I. Certain Azo Dyes Derived From 2-Amino Phenol-4-Sulfonic Acid; Ii. A Study Of The Reduction Rate Of 2-Nitro Phenol-4-Sulfonic Acid, Albert Edward Cohen

Theses

No abstract provided.

Calcium Metal : Laboratory Preparation By Vacuum Metallurgy, George Robert Couch

Theses

No abstract provided.

Adiabatic Distillation Of Dilute Formaldehyde Solutions, Robert L. Craven

Theses

No abstract provided.

The Influence Of Agitation On A Continuous Counter-Current Liquid-Liquid Extraction Column, William John Hartmann

Theses

This work presents operating data and correlations of agitated extraction equipment studied under continuous counter-current flow.

The experimental work was carried out in at agitated column 36 inches in length with an internal diameter of 2 inches using the system toluene, benzoic acid and water. The working section of the column was 24 inches. The design of the column used for the experimental work is similar to that proposed in a patent by van Dijck (3). The column is similar only to the extent that the patent covers numerous conditions of vertical agitation.

The distribution data and the equilibrium solubility …

Fm 30-16, Technical Intelligence, 29 June 1953, Robert Bolin , Depositor

United States Department of Defense Military Intelligence

This is the first US Army manual on technical intelligence. The concept of technical intelligence developed during World War II. Technical intelligence doctrine was formalized by a series of army training circulars and other directives. Toward the end of WWII a new army Field Manual 30-15, Examination of Enemy Personnel, Repatriates, Civilians, Documents, and Materiel (June 1954) was issued, but that manual did not reflect the World War II technical intelligence experience or actual army practices. That manual was superceded by Field Manual 30-15, Examination of Personnel and Documents, 27 September 1951 and by this manual.

This manual defines technical …

Test 497: Case Model Sc, Nebraska Tractor Test Lab

Nebraska Tractor Tests

This report and any related files are made available to the online through the Lester F. Larsen Tractor Test and Power Museum as resources allow. Established in 1998, this museum is located on the University of Nebraska-Lincoln East Campus. It is and appropriately housed within the walls of the historic 1920 Nebraska Tractor Test Laboratory, where the first tractor test was started on March 31st, 1920. Because the pioneer tests became worldwide standards, this location was designated as a Historic Landmark of Agricultural Engineering by the American Society of Agricultural Engineers in 1980, shortly after testing was moved to a …

Test 496: Case Sc Gas, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT: TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear. This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker, point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated. BELT HORSEPOWER TESTS TEST B: The throttle …

Test 495: Someca Da 50, Nebraska Tractor Test Lab

Nebraska Tractor Tests

This report and any related files are made available to the online through the Lester F. Larsen Tractor Test and Power Museum as resources allow. Established in 1998, this museum is located on the University of Nebraska-Lincoln East Campus. It is and appropriately housed within the walls of the historic 1920 Nebraska Tractor Test Laboratory, where the first tractor test was started on March 31st, 1920. Because the pioneer tests became worldwide standards, this location was designated as a Historic Landmark of Agricultural Engineering by the American Society of Agricultural Engineers in 1980, shortly after testing was moved to a …

News Bulletin - June-July, 1953, Civil Aviation Medical Association

Browse all Civil Aviation Medical Association Newsletters

A nine page newsletter of the Airline Medical Examiners Association which was published on an irregular basis from 1950-1957. This organization was a predecessor of the Civil Aviation Medical Association. The newsletter provided news about civil aviation medicine and information related to the organization.

The Construction And Operation Of A Universal Specimen Mount With Protective Lead Shield For The Purpose Of Determining Pole Figures Using The Schulz-Decker Transmission Technique, Richard L. Fausner

Bachelors Theses and Reports, 1928 - 1970

It was the purpose of this study to construct a universal mount, to construct a protective lead shield, to operate the instrument, and to provide a pole figure using the transmission method of Schulz and Decker. There are at present several lengthy x-ray methods of determining the grain orientation of metals. These methods are mainly photographic. In order to provide a rapid means of obtaining the necessary information concerning the grain orientation of a metal, a universal mount was constructed.

The Lucky Hit Mine Of Jefferson County, Montana, Bruce B. Goddard

Bachelors Theses and Reports, 1928 - 1970

Many mines in the Cardwell Mining District have been more or less steady producers of gold, silver, lead and zinc since 18SO. The area first came into prominence with the discovery of gold at the Mayflower Mine in 1896. Soon after the Mayflower discovery, many claims were located in the nearby Saint Paul Gulch area, northeast of Whitehall. The Lucky Hit Mine is located in Saint Paul Gulch area of the Cardwell Mining District.

Nonmetallic Mineral Resources Of Montana (Except Fuels), F. L. Rytlewski

Bachelors Theses and Reports, 1928 - 1970

Essentially, the paper is composed of seven parts, each of which concerns a group of related nonmetallic minerals such as ceramic materials, gemstones, or abra­sives. Following the data pertaining to the minerals of each group are index mars locating the major mineral deposits which are known to date. Production and reserve figures are listed by tables in cases where such information is available.

Stratigraphy Of Kootenai In Montana, B. B. Jarrett

Bachelors Theses and Reports, 1928 - 1970

The Kootenai of Montana is a variable formation as far as composition is concerned. The formation consisting largely of a series of sandstones, shales, and shaly sandstones. The presence of the limestone and carbonaceous members being irregular indicating variable climatic conditions throughout the deposition of the sediments. The fresh water environment being confined to the western slope, while the central and the eastern portions had more swampy conditions with local fresh water depositions.