Engineering Commons^™

Water Resources Research - A Challenge To The Social Scientists, Dean F. Peterson

Reports

No abstract provided.

Linear Programming With Random Requirements, Nak Je Kim

Reports

Linear programming was first developed by George B. Dantzig, Marshall Wood, and associates of the U.S. Air Force, in 1947. At that time, the Air Force organized a research group under the title of project SCOOP (Scientific Computation of Optimum Programs). This project contributed to the developing of a general interindustry model based on the Leontief input-output model, the Air Force programming and budgeting problem, and the problems which involved the relationship between two-person zero sum games and linear programming. The result was the formal development and application of the linear programming model. This project also developed the simplex computational …

Air Pollution Control And Abatement Proceedings Of A Symposium, Allen D. Kartchner

Reports

No abstract provided.

Solutions To Axisymmetric Seepage From Ponds Through Homogeneous And Nonhomogeneous Porous Media, Roland W. Jeppson

Reports

No abstract provided.

Atomic Absorption As An Index Of The Silver Concentration In Precipitation, Silver Iodide Plume Studies, Part 1, Joel E. Fletcher, H C. Millar

Reports

The Perkin Elmbver Model 303, equipped with the DCR-1, digital concentration readout, was evaluated as to its ability to provide an index of silver concentration in water solutions, without concentrating in any manner. The procedures, principal settings, and adjustments which must be observed are described.

This instrument can detect the difference between concentrations of 10-15 and 10-12 gm/ml. However, as the concentration of silver decreases the experimental error increases to a point at which the error becomes greater than the differences in readout due to differences in silver concentration.

A Conceptual Model Of The San Pitch River Basin, James D. Ballif

Reports

To meet future expected needs for water, the State of Utah will have to plan and manage its limited resources in a judicious manner. Comprehensive water resources planning on a river basin basis is necessary to economically plan and develop the best combination of water uses. Efficient use and management of agricultural water is necessary to maximize the amount available for future needs. Irrigation water management must be improved. Improvements in the organization, storage, distribution, and method of application will be required to meet future demands. Consideration should be given to various combinations of conjunctive use of groundwater and surface …

Australian Tractor Test Report No. 49 : Mccormick International 624, G H. Vasey, W. F. Baillie

Journal of the Department of Agriculture, Western Australia, Series 4

AUSTRALIAN TRACTOR TEST REPORT

No. 49 - McCORMICK INTERNATIONAL 624

A Novel Method For Solving The Uniform Distributed Network Analysis Problem, Robert C. Peirson, Edward C. Bertnolli

Electrical and Computer Engineering Faculty Research & Creative Works

An application of the Laplace transform method of Ogata to the solution of the uniform distributed network analysis problem is described. Copyright © 1968 by The Institute of Electrical and Electronics Engineers, Inc.

Design Of Truncated Sequential Tests For Rapidly Fading Radar Targets, Norval D. Wallace

Electrical and Computer Engineering Faculty Research & Creative Works

Curves and equations are presented from which the exact performance of truncated sequential tests can be determined for one important case: the biased square-law detector for the detection of rapidly fading targets. The method of generating functions is used to derive probability distributions for sample size. It is shown how these probability distributions can be used to determine truncation errors and the effects of multiple-resolution elements. Sample calculations are performed to determine the effects of a particular truncation procedure. Copyright © 1968 by The Institute of Electrical and Electronics Engineers, Inc.

Electric Field Investigations And A Model For Electrical Liquid Spraying, Wallace E. Deshon, Ralph S. Carson

Electrical and Computer Engineering Faculty Research & Creative Works

The equation generally used for determining the electric field at the liquid tip in electrical spraying of liquids was originally derived for determining the electric field around a metal tip in the extraction of electrons from metals. In the present paper experimental data were taken at the instant of spraying to determine the validity of using this equation for liquid tips. the results indicate that the value of electric field given by this equation needs to be increased by about 20% in the normal range of operation. A model for the spraying mechanism of the liquid is also presented. © …

Chemical Precipitation Of Phosphorous With Sodium Aluminate And Alum In The Activated Sludge Aeration Chamber, Richard Charles Vedder

Masters Theses

"The purpose of this investigation was to study the removal of phosphorus by chemical precipitation with sodium aluminate and alum in the activated sludge aeration chamber, and determine the effect of the aluminum to phosphorus ratio and the mixed liquor suspended solids concentration on the phosphorus removal efficiency and the effect of the precipitants on the removal of organic pollutants in the activated sludge process. The studies were conducted on settled domestic sewage in three bench-scale continuous flow activated sludge units supplemented with jar tests. Major parameters employed included influent and effluent total phosphorus and chemical oxygen demand (COD), mixed …

Pressure Welding Of Continuously Cast Nodular Iron, Gerald W. Wille

Masters Theses

"The objective of this study was to determine the feasibility of using pressure welding as a joining technique for swaged nodular iron.

Test pressure welds were produced with swaged continuous cast nodular iron at temperatures between 1750⁰F and 2050⁰F with welding pressures between 15,900 psi and 51,400 psi using an induction coil to heat the weld zone.

Pressure welds of greater strength than the as-received nodular iron were produced by swaging the material before welding. The optimum welding parameters were a temperature of 2050⁰F with a welding pressure of 46,700 psi.

On the basis of these tests it is concluded …

Scattering Parameter Measurements And Amplifier Design, Thomas J. Herrick

Masters Theses

"The scattering parameter formulation in describing the small-signal operation of an active two-port device is developed. The inherent advantages of measuring the scattering parameters at UHF frequencies and the clear insight into the design problem are demonstrated. Some of the practical difficulties in a typical design problem are also considered"--Abstract, page ii.

Engineering Properties Of Bloomington-Normal Subsoils, Rohn Dunseth Abbott

Masters Theses

"The glacial subsoils of the Bloomington-Normal, Illinois area have been analyzed with regard to their engineering properties. Several boring logs are included to illustrate the horizontal and vertical variability in soil units encountered and in the engineering properties of these soil units. The engineering properties of the two most common foundation soils, the Bloomington and Normal tills are compared and special consideration is given to evaluating the compressibility of these materials. Evidence is presented that indicates that the circumferential trimming of a highly preconsolidated soil containing stones can cause significant sample disturbance. Special sampling techniques which eliminate circumferential trimming yield …

Analytical And Experimental Methods For Determining The Properties Of Materials At Very High Rates Of Loading, A. G. Behring

Masters Theses

"In the following report, some of the properties of ALCOA 7075 T651 aluminum, when subjected to high rates of loading, are experimentally investigated by impacting two rods of the material longitudinally. One rod is accelerated to a uniform velocity with an air gun launcher. The stationary second rod is instrumented with strain gages on its lateral surface in order to determine the strain-time history following impact. A detailed description of the experimental equipment is included. Simple, one-dimensional theory is used to determine the dynamic, elastic modulus of the test material under the impact condition. Several observations regarding the behavior of …

The Design Of A Hybrid Computer System, James Joseph Becker

Masters Theses

"Three typical hybrid computers in industry and educational institutions are presented. The hybrid computer designed and built at the University of Missouri at Rolla consists of an SCC-650 digital computer, a TR-48 analog computer, and a hybrid interface. The interface permits the digital computer to control the modes of operation on the analog computer. There are also 9 multiple-pole relays on the interface that can be controlled by the digital computer. A 320 hold removable patchboard is included in the interface. There are 40 trunks lines from the analog computer that are present on the patchboard. The 4 digital-to-analog channels …

The Design Of A Tape Deck Controller, Frederick Harold Keeve

Masters Theses

"A controller was built to interface the SCC-650 general purpose digital computer and the Kennedy Model 1400R incremental write/continuous read tape unit. All logic design information, signal lists, and tape deck instructions are included"--Abstract, page ii.

The Design Of A Molten Fueled, Vortex Reactor, For Use As A Rocket Propulsion Device, Robert Philip Schmitt

Masters Theses

"The purpose of this investigation is to design a nuclear reactor which can be used as a rocket propulsion device. The reactor investigated is fueled with a molten uranium-bismuth alloy and utilizes a two phase vortex flow principle. Hydrogen is employed as a coolant and rocket propellant. The hydrogen is heated directly by the fuel thus eliminating the need for heat exchangers. The major part of the investigation consists of a two group neutron diffusion study to show the operational feasibility of this type of reactor and to obtain an optimum design. the study shows that this type of reactor …

Construction Time And Cost Control Using The Ibm Project Management System/360, James Donald Bailey

Masters Theses

"The object of this investigation was to determine the advantages or disadvantages involved in the use of the IBM Project Management system/360 as a time and cost control tool as compared to the methods presently used by construction contractors in the small to medium size range.

The methods used by three construction contractors were investigated in order to acquire a sample of methods presently used.

It was determined from the investigation that a number of advantages could be obtained which would provide better control of a construction project.

It was also decided that a detailed investigation concerning the cost of …

A Numerical (Matrix) Solution For The Vibration Frequencies And Modes Of A Nonuniform Rectangular Plate With Arbitrary Edge Conditions, F. David Utterback

Masters Theses

"The material presented in this thesis is designed to provide the practicing engineer with a practical, approximate method of solution for the increasingly important problem of plate vibrations. The technique presented herein is basically an application of the use of generalized coordinates to describe the elastic and inertial properties of a finite element representation of a nonuniform rectangular plate. The plate will be idealized by utilizing a modification of the grid work technique developed by Hrennifkoff as a lattice work of interconnecting beams. By employing the elastic displacements as generalized coordinates, the only required compatibility conditions are that the displacements …

The Numerical Solution Of Two-Dimensional Fluid Flow Problems, E. David Spong

Masters Theses

"A numerical solution method is developed for the solution of two-dimensional, irrotational and compressible fluid flow problems. The partial differential equation, in terms of the velocity potential, describing the flow is replaced by finite difference equations and the resulting matrix is solved by Gaussian elimination. The method is successfully applied to two subsonic flow problems: a 7.5⁰ wedge and a 6⁰ wedge inlet. The method becomes invalid, as expected, with the appearance of sonic velocity in the flow field. An investigation of the definition of the singularities is made. This indicates that the best agreement with the experimental results for …

Sufficiency Conditions For Constrained Optima, Cheng-Chun Huang

Masters Theses

"The sufficiency conditions for constrained optimization problems are derived through the use of Lagrangian functions and through the introduction of the new concept of "constrained total derivatives." The relations can be used with equality and/or inequality constraints. The sufficiency conditions derived earlier by Phipps were corrected in this work--Abstract, page ii.

Distillation Column Simulation And Control, Hsian T. Chao

Masters Theses

"A 5-component, 10-stage distillation column was simulated by PACTOLUS by use of the hybrid technique. It was found that the digital-analog simulator is completely satisfactory for solving unsteady-state multicomponent distillation problems. A feedforward controller for a distillation column was designed and tested. The effects of feedforward and feedback control on binary system distillation columns were compared by PACTOLUS. It was found that the liquid flow rates, the holdups as well as the number of stages are important factors in the design of a feedforward controller"--Abstract, page ii.

A Study Of Swirling Air Flow In A Converging Nozzle, Charles William Lineberry

Masters Theses

"A study was conducted to determine the behavior of swirling air flow in a converging nozzle. Special instrumentation was constructed to obtain radial traverses of the flow at four axial positions. the data collected consisted of velocity, static pressure, and stagnation temperature. The flow pattern demonstrated the Ranque-Hilsh effect and reversed axial flow in the core region. As the flow entered the nozzle, it had the characteristics of a free vortex. At the exit plane the characteristics were those of a forced vortex. The converging nozzle caused an increase in the magnitude of the axial velocity component"--Abstract, page ii.

An Experimental Method Of Determining The Thermal Accommodation Coefficients Of Metallic Surfaces, Raymond John Dethorne

Masters Theses

"In the free molecule regime, Knudsen number greater than 10, heat is transferred from a solid by radiation and conduction. The ability of a surface to emit radiant energy is governed by a surface property called emittance while the surface property which apparently regulates the amount of heat transferred by conduction is called the thermal accommodation coefficient. This thesis presents the results of an experimental investigation to determine a relationship between these two properties, emittance and thermal accommodation coefficient. A test apparatus was constructed to measure both the radiation and conduction contributions between two concentric cylinders. cylinders of aluminum and …

Compressive Creep Of Basic Refractories, Maurice E. Green

Masters Theses

"The microstructure and mineralogical composition of direct bonded, 50 wt.% magnesia - 50 wt.% chrome ore refractory compositions containing controlled additions of silica were correlated with their compressive creep behavior in the temperature range 1450⁰ to 1550⁰C under stresses of 100 to 175 psi. Steady state creep rates were determined from the linear regression of the steady state regions of deformation on time. Apparent activation energies and deformation flow characteristics were determined from the temperature and stress dependence of the steady state creep rates. Silica contents up to 3.5 wt.% increased the amount of direct intergranular bonding which decreased the …

Kinetics Of The Formation Of Strontium Zirconate, W. H. Parker

Masters Theses

"The decomposition rate of strontium carbonate (SrC0₃) was measured using a TGA apparatus. It was found to deviate slightly from zero order classical reaction. The rate of formation of strontium zirconate (SrZr0₃) from zirconium oxide (ZrO₂) and strontium oxide (SrO) in the form of the decomposition product of SrCO₃ was measured using quantitative x-ray diffraction for mineralogical analysis. It was found to most nearly follow the Zhuravlev-Lesokhin-Tempel' man rate equation. The rate of decomposition of strontium carbonate was found to be more rapid than the rate of formation of strontium zirconate such that for the most part strontium oxide is …

Spacing Of Explosive Charges, Calvin J. Konya

Masters Theses

"It is generally believed that the spacing of simultaneously initiated collar primed multiple charges is not dependent on the charge length. The stresses generated by explosive charges have been assumed to propagate through a material in a cylindrical manner. this assumption implied that the stress generated in any plane along the charge diameter would have been uniform in magnitude and direction. A finite explosive velocity along with a conical stress wave causes the stresses near the collar to differ from those farther down the column. for this reason, the spacing of charges would be dependent on charge length. An experimental …

Thermal Runaway In Power Transistors, Jerry H. Lee

Masters Theses

"Considerable work has been done on the theory of thermal runaway and the relationship between transistor junction temperature and collector power dissipation. The first part of this thesis is a review of literature. An equation for the normalized junction temperature and its peak value is developed. From this equation, the junction temperature at the thermal runaway point for a given maximum power dissipation could be determined. The second part of this thesis is experimental. The author examined the thermal runaway points for eight different transistors in the basic common emitter class A circuit which operated under no signal DC conditions"--Abstract, …

Radiation And Annealing Characteristics In Neutron Bombarded Transistors Operated In The Inverse Configuration, Lo-Soun Su

Masters Theses

"When operating a silicon planar epitaxial transistor in the inverse configuration (i.e., with the emitter functioning as a collector and the collector functioning an emitter) the bulk space-charge volume of the new "emitter-base" junction is increased by a factor of 26.5 times that of the normal emitter-base junction. The carrier concentration in the new "emitter" is decreased by five orders of magnitude from that of the normal emitter, thus making it easier to investigate the effects of neutron radiation on the space-charge region and at the surface. Experiments using biasing of the new "emitter-base" junction during neutron radiation to change …