Engineering Commons^™

Study Of Sheltered Evaporation In Colombia, Guillermo Pardo-Bonilla

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Equations, tables, and graphs for estimating evaporation from sheltered evaporimeters were developed, based on data from 20 stations in Colombia.

Computer programs and plottings were the basic tools to work out the equations. The form of the simplified final equation is

Ev = kC_VPDC_T

in which

• Ev is the evaporation in millimeters per day
• K is a constant
• C_VPD is the vapor pressure deficit coefficient
• C_T is the temperature coefficient

Statistical parameters were determined to compare the measured evaporation with the Christiansen-Guillen formula and the newly developed formulas.

An Experimental Study Of The Effects Of Welding On Cold-Worked And On Heat-Treated Steels As They Correlate To Tempering And Jominy Data, Kiran Patwari

Theses and Dissertations

Since Bernandos of Russia in 1887 applied an electric arc to weld metals, welding has become an important method of fabrication in industry. The ever increasing use of welding on a still widening variety of materials demands m ore and m ore understanding of the basic mechanisms of welding.

Transition From Laminar To Turbulent Flow For Dilute Guar Gum Solutions, Martin L. Palmer

Theses and Dissertations

Solutions of many natural and synthetic polymers have been found to reduce turbulent friction losses in flow through pipes. The basic mechanism causing these reductions is not entirely understood although two general theories have been advanced.

Design Criteria For Usu Stilling Basin Pipe Flow To Open Channels, Chi-Yuan Wei

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Criterion have been developed in this study for designing a stilling basin to serve as a transition from pipe flow to open channel flow. The purpose of the structure is to prevent erosion in an open channel. The unsteadiness, or smoothness, of the water surface in the model basin was used as the criterion for evaluating the effectiveness of the structure for energy dissipation.

The introduction of a short-pipe energy dissipater in the stilling basin has proven effective in dissipating energy. The stilling basin was designed for a fully submerged pipe outlet. The inflow pipe and the dissipator pipe were …

Study Of Tensile Stress Versus Strain Characteristics Of Vinyl Plastic At Various Temperatures As A Function Of Strain Rate, Jitendra T. Parikh

Theses and Dissertations

The purpose of this thesis was to study the tensile-stress versus strain characteristics of vinyl plastic at various temperatures as a function of strain rate.

The Gaussian Mode In Optical Resonators With A Radial Gain Profile, Lee W. Casperson, Amon Yariv

Electrical and Computer Engineering Faculty Publications and Presentations

The dependence of the parameters of the Gaussian mode in laser resonators on the properties of the medium in the cavity is studied. Experimental verification of the theoretical results is presented. It is found that the modes in a high‐gain laser may differ widely from the usual free space resonator results. Also, resonator configurations which in free space are unstable may, with a suitable medium, support low‐loss Gaussian modes.

A Similarity Model For Flow In A Turbulent Boundary Layer, Earl Clark Lemmon

Theses and Dissertations

One of the basic goals in engineering is to generate models which will provide a means for analytically predicting observed phenomenon. Such a model is often modified several times to obtain better results. The purpose of this study was to generate a model for an equilibrium turbulent boundary layer for steady flow over a flat plate and compare the results obtained by using the model with experimental data. Part of the objective was to also suggest ways in which the model could be modified to obtain better results.

Developing Turbulent Flow In An Annulus, Dwight H. Kelly

Theses and Dissertations

Turbulent flows are encountered in nearly every case where fluid motion is involved. Since turbulent flow through relatively short annular sections occurs frequently in practical applications, e.g., flow through heat exchangers, axial flow turbomachinery and jet aircraft engines, there is a need for detailed information on this subject.

Streamflow Forecasting For The Logan And Blacksmith Fork Rivers In Northern Utah, Kenneth A. Mangelson

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Accurate streamflow forecasts have been recognized as being important by water users and others whose occupations and pursuits depend upon the supply of water from snow fed streams.

The streamflow forecasting equations for the important predictive periods, in particular the April through September and the May through September total flows, were developed in this study for both the Logan and Blacksmith Fork Rivers.

Multiple linear regress ion was used as a mathematical model in determining the streamflow forecasting equations. A correlation analysis was used to determine the importance of the variables used in the mathematical model. The results of this …

A Study Of Free Surface And Viscous Effects On Simulated Rough Open Channel Beds, Julian B. Andersen

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

An experiment was designed to eliminate the free surface from simulated naturally roughened open channel beds from which results were compared to data with a free surface from another study. All other pertinent variables were held constant. From this comparison, a relationship was established for the additional energy loss due to the presence of a free surface in the flow over these channel beds.
P = 0.23 - 0.28 D/D₂₅
where P is the proportion that the channel conductance coefficient (C/g^1/2) is reduced due to presence of a free surface, D is the flow depth, K_{25 …}

Irrigation Demand In The Utah Lake Drainage Area The Role Of Irrigation Efficiency, Hiro Mizue

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The effect of irrigation efficiency upon the water demand for agricultural purposes in the Utah Lake drainage area has been evaluated in this study . Irrigation demand is the quantity of water at the supply source necessary to satisfy crop water requirements, taking into account irrigation efficiency.

The Utah Lake drainage area was divided into hydrologic subareas and districts to facilitate analysis. The demand, surplus, and deficit quantities for each area was determined. The computations were made using constant mean quantities. Within a given area, the diverted water was assumed to be applied uniformly to satisfy agricultural crop demands, and …

Design Of An Automatically Controlled-Feed, Constant Current Arc Generating Machine For Consumable Electrodes, Dhansukh J. Chauhan

Theses and Dissertations

Good welding research requires accurate control of the variables involved,to achieve consistent results. The variables involved in arc welding are of the dependent and independent type. Control of the independent variables such as arc current, arc voltage and welding velocity is necessary to control the independent variables such as penetration, electrode consumption rate, etc. The purpose of this thesis was to design, develop and test an automatic welding machine which controlled the above variables within the limits required for welding research.

Design Of An Apparatus For Study Of Stress Versus Strain As A Function Of Strain Rate In Plastics, Ashok B. Choksi

Theses and Dissertations

As new materials are developed, it is essential to study their mechanical properties experimentally. It is easy to find properties like ultimate strength, yield strength, hardness, etc., using standard techniques. It is not possible to observe the tensile behavior of materials at high strain rates using standard equipment. Plastics are often subjected to tensile loads at various rates of loading, such as when they are used to absorb impact.

The Enrichment Of Hydro-Carbon Fuel By Aluminum Powder In An Open-Hearth Furnace, Rick Sung-Tao Lee

Theses and Dissertations

The objective of this thesis was to study theoretically the enrichment of hydrocarbon fuels with aluminum powder for an open-hearth furnace.

Electric Arc Welding Of Gray Cast Iron Without Preheating, Ramon Prestwich

Theses and Dissertations

Cast irons are iron-carbon alloys with greater than 1.7% carbon. Although white, malleable and ductile cast irons are used extensively for casting work, this study is concerned with only the gray cast irons.

Automation In The Design Of Asynchronous Sequential Circuits, Richard T. Smith, James H. Tracey, W. L. Schoeffel, G. K. Maki

Electrical and Computer Engineering Faculty Research & Creative Works

Sequential switching circuits are commonly classified as being either synchronous or asynchronous. Clock pulses synchronize the operations of the synchronous circuit. The operation of an asynchronous circuit is usually assumed to be independent of such clocks. The operating speed of an asynchronous circuit is thus limited only by basic device speed. One disadvantage of asynchronous circuit design has been the complexity of the synthesis procedures for large circuits.

Test 972: Oliver 1950-T Diesel 4wd, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 971: International Farmall 1256 Turbo (Diesel), Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT GENERAL CONDITIONS East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers. PREPARATION FOR PERFORMANCE RUNS The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Test 970: International Farmall 856 (Diesel), Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT GENERAL CONDITIONS East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers. PREPARATION FOR PERFORMANCE RUNS The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Ptimal Feedback Control Of The Radioactive Voltage Standard, David William Braudaway

Electrical and Computer Engineering ETDs

The quest for new and different techniques of establishing and maintaining the electrical values is continual Among the techniques desired are those for producing highly predictable sources of voltage. Described in this dissertation is a working device developed around one such technique, the research done to define the system and the synthesis of the automatic control which makes it practical. In this system, the reproducibility of the voltage output is derived from the predictability of the decay of a radioactive heat source.

Problems In Structural Diaphragm Bracing 1. Beams Continuously Braced By Diaphragms 2. I-Section Columns Braced By Girts And A Diaphragm, T. V. S. R. Apparao, S. J. Errera, Gordon P. Fisher

CCFSS Library (1939 - present)

Shear-resistant light-gage metal diaphragms can be very effective in increasing the load carrying capacity of beams continuously braced by diaphragms, or of columns braced by girts which in turn are braced by diaphragms, if proper connections are made between the individual elements. In this thesis, behavior of diaphragm-braced I-beams, channel beams, and Z-beams under uniform moments, and the behavior of axially loaded I-section columns braced by girts which in turn are braced by diaphragms are investigated.

Load-deflection relationships of diaphragm-braced beams are obtained taking into consideration the initial imperfections of the beams and using the equilibrium method. Critical moments of …

Structural Behavior Of Small-Scale Steel Models, William A. Litle, David C. Foster, Duke Oakes, Philip A. Falcone, Richard B. Reimer

CCFSS Library (1939 - present)

No abstract provided.

The Dynamic Behavior Of Steel Frame And Truss Buildings, Dixon Rea, Jack G. Bouwkamp, R. W. Clough

CCFSS Library (1939 - present)

This report describes experimental and analytical studies of the dynamic behavior of the East Building of the University of California's new Medical Center at San Francisco, California. It also describes experimental tests conducted on the East Building's mechanical service tower and on an adjacent elevator tower. Experimental tests on the East Building were conducted in the summers of 1964 and 1965. Vibrations were produced by eccentric-masstype vibration generators. Frequency responses, time responses, and mode shapes were observed. In the summer 1964 tests, the first mode east-west had 2% of critical damping and the first mode north-south had 1.8%; the values …

An Evaluation Of Temperature Distribution Within Asphalt Pavements And Its Relationship To Pavement Deflection, Herbert F. Southgate

Kentucky Transportation Center Research Report

The attached report presents significant progress and achievements in the area of asphalt pavement design. Benkelman beam deflections were used extensively in conjunction with our 1958 study of asphalt pavement performance; apparent relationships between 18–kip deflections and pavement structures were evident then although scatter in the data was thought to be necessarily admissible. During the spring and summer of 1966, another extensive series of pavements, built since 1958, were evaluated from the standpoint of performance and deflection. It seemed compelling at that time to adjust all deflections to some common reference temperature and so the surface temperature of the pavement …

The Crab Orchard And Osgood Formations: The Case For Slope Instability, Robert C. Deen

Kentucky Transportation Center Research Report

For the past few years, the Division of Research, as a part of its continuing study of the occurrence of landslides in Kentucky, has reviewed and studied several sites in order to identify and delineate the geologic and soil formations which might be involved in the unstable earth masses. After a study of a number of landslides, it became evident that one particular material was highly susceptible to the development of landslides. This material, in Eastern Kentucky, is known as the Crab Orchard Formation and was deposited during the middle Silurian age. The Crab Orchard Formation, a deposit some 50 …

Deformation And Energy Absorption Capacity Of Steel Structures In The Inelastic Range, Theodore V. Galambos

CCFSS Library (1939 - present)

This report summarizes the status of knowledge on the inelastic deformability of steel members and frames. It demonstrates that the inelastic response of planar beams, beamcolumns, connections and frames is well understood and can be adequately, though conservatively, predicted by theory provided the loading is static, proportional and monotonic, and adequate provisions are made to inhibit premature local and lateral-torsional instability. The report reviews the available theoretical work, and examines the experimental evidence. It shows that the inelastic rotation capacity, which defines also the "ductility factor" and the inelastic energy absorption capacity, is both predictable and large enough to meet …

The Influence Of Ionic Polarizability On The High Temperature Mechanical Properties Of Ionic Crystals, William A. Johnston

Masters Theses

No abstract provided.

Transient Pulse Transmission Using Impedance Loaded Cyclindrical Antennas, David E. Merewether

Electrical and Computer Engineering ETDs

Two aspects of the problem of pulse transmission using impedance loaded cylindrical antennas have been considered. First, an approximate solution is obtained for the current distribution on a thin cylindrical antenna driven at an arbitrary point along its length. This solution may be applied to an antenna of any length, and its simplicity makes the current distribution rapidly computable. This solution is ideal for the prediction of the transient electromagnetic field radiated when an arbitrary voltage transient is impressed across the input terminals of a long, thin, cylindrical antenna loaded with lumped im­pedances. Second, an antenna synthesis procedure was evolved. …

A High Current Density Pulse-Mode Proton Source: Preliminary Study, Warren D. Smith

Electrical and Computer Engineering ETDs

A neutron source which produces high density pulses is useful, for example, in the simulation of an atomic blast or in neutron activation chemical analysis. Rather than forming pulses by deflecting the deuteron beam emitted from a continuous source of deuterons onto and off of a tritium target, it was decided to investigate the possibility of transient deuteron production. Proton sources were studied in place of deuteron sources because of the availability of hydrogen gas for experimentation. An experimental system was set up in which transient electrical discharges through hydrogen could take place. It was hoped that discharges could be …

A Three-Component Force Transducer For Monorail Rocket Sleds, Vincent Warren Gorman

Mechanical Engineering ETDs

A three-component force transducer which permits measurement of the vertical force, the cross-track force, and the roll moment about an axis parallel to the track was developed for use on monorail rocket sleds. For this force system it was found that the maximum allowable load for both the vertical and cross-track components was approximately 28,000 pounds, and the maximum allowable roll moment was approximately 45,500 inch-pounds. The transducer, mounted between the slipper and sled, uses strain gages as component sensing elements. The strain gage bridges were statically calibrated for each component of load the transducer was designed to measure. In …