Engineering Commons^™

Intermittency And Structure Of A Jet Exhausting Into A Stratified Fluid, Alan Brandt, H. E. Gilreath, C. L. Yates, C. R. Walton

Symposia on Turbulence in Liquids

This preliminary study of the mechanism by which local turbulent regions generate internal gravity waves in a stably stratified fluid is based on comparisons of the visual and hot-film- anemometer observations of a jet exhausting into a stratified fluid with those for a jet exhausting into a homogeneous medium. The stratified environment limits the growth of the mean jet boundary, or from another point of view, inhibits the vertical motion of the instantaneous turbulent/non-turbulent interface. The visual and non-conditional statistical averages agree with expectations and with previous measurements in stratified turbulent wakes. Application of a standard criterion to determine the …

Promising Directions For Liquid Turbulence Research --Panel Discussion, Victor Goldschmidt, J. H. Whitelaw, V. A. Sandborn, Val Kibens, R. E. Kaplan

Symposia on Turbulence in Liquids

No abstract provided.

Test 1131: Deutz D 4506 And 4507 Diesel (Also Deutz-Fahr D-4507 Diesel) 8-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT

GENERAL CONDITIONS

East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers.

PREPARATION FOR PERFORMANCE RUNS

The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Test 1138: David Brown 1212 Diesel (Also Case 1210 Power Shift Diesel) 12-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT GENERAL CONDITIONS East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers. PREPARATION FOR PERFORMANCE RUNS The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Test 1148: Case 1370 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT GENERAL CONDITIONS East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers. PREPARATION FOR PERFORMANCE RUNS The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Bridge / Tunnel Crossing Study : Portland Harbor - Fore River, Portland - South Portland, Maine Department Of Transportation

Maine Collection

Bridge / Tunnel Crossing Study : Portland Harbor - Fore River, Portland - South Portland

Report by Fay, Spofford & Thorndike, Inc., Engineers, Boston, Mass.

Prepared for the Maine Department of Transportation, Augusta, Maine, 1973.

Contents: Table of Contents / List of Figures / List of Tables / Introduction / Summary of Findings / Section 1 - General Background - Location Study / Section 2 - Alternative Facilities and Locations / Section 3 - Comparison of Construction Costs - Tunnel Versus Bridge / Section 4 - Traffic Analysis / Section 5 - Cost Effectiveness Analysis / Section 6 - Financial …

Tests On Field Welded Puddle And Fillet Weld Connections, R. S. Yarnell, Teoman Peköz

CCFSS Library (1939 - present)

INTRODUCTION This report contains the results of tests on 122 field welded connections. Most of the specimens are approximately the same as those that were shop welded previously and tested. The results of tests on shop welded specimens are given in Ref. 2. Those field welded specimens that do not correspond to the shop welded specimens are indicated in Table lA. Except as noted, all notations, variables, weld configurations and procedures are identical with those in Ref. 2. All specimens were tested in a hydraulic test machine under monotonically increasing slowly applied tensile force. This report differs from Ref. 2 …

Diaphragm Braced Thin-Walled Open Sections And Design Of Wall Studs, Amir Simaan, Teoman Peköz

CCFSS Library (1939 - present)

INTRODUCTION Cold-formed steel wall studs generally are I, Z or channel shaped with or without stiffening lips, and with webs perpendicular to the plane of the wall. Because of their configuration and dimensions, these sections are quite unstable by themselves. However, the stability and, hence, load-carrying capacity of such studs are increased substantially once they are connected to the wallboard material. The main function of the wallboard is that of enclosure, but it serves also as a bracing system for the studs. Gypsum board, vegetable fiberboard, tempered board or plywood are commonly used wallboard materials. Such boards are connected to …

Column Research Council: Proceedings 1973, Column Research Council

CCFSS Library (1939 - present)

One of the purposes of the Council is to maintain a forum where problems related to the design and behavior of columns and other compression elements in metal structures can be presented for evaluation and discussion. The Annual Technical Session provides opportunity to carry out this function. The 1973 Annual Technical Session was held on May 2 and 3 at the Los Angeles Hilton Hotel in Los Angeles, California. Sixty persons attended the Session and thirty-three papers were delivered. A panel discussion on "Frame Stability Under Seismic Loading" was held in the evening of May 2, 1973. Panelists were E. …

Conference Proceedings Of The 3rd Biennial Symposium On Turbulence In Liquids, University Of Missouri--Rolla

Symposia on Turbulence in Liquids

The Third Biennial Symposium on Turbulence in Liquids showed further progress in the investigator's ability to measure turbulence parameters and in the general understanding of turbulence. The most impressive advances in measurement seemed to be the ability to measure deeper into the turbulent boundary layer in order to obtain profiles over the entire turbulence production region and the rapid development of conditioned-sampling techniques for studying hypotheses for mechanisms.

Dynamic Response Of Forced Convective Heat Transfer From Cylinders To Low Prandtl Number Fluids, D. G. Malcolm, V. Verma

Symposia on Turbulence in Liquids

The present paper can be viewed as an extension of the work of Lim and Sleicher (9). They evaluated the frequency response of the heated element submerged in liquid metal by a perturbation method for Peclet numbers of up to 0.4. Velocity fluctuations were assumed small and second-order perturbations neglected. The Oseen approximation was made to the velocity field. Here the velocity configuration has been approximated to that of potential flow and the convection equation has been solved numerically with the aid of a digital computer. The potential flow approximation, as compared with the Oseen approximation, is reasonable over a …

The Economic Efficiency Of Inter-Basin Agricultural Water Transfers In Utah: A Mathematical Programming Approach, John E. Keith, Jay C. Andersen, Calvin G. Clyde

Reports

The economic efficiency of water development in Utah, including transfer systems, has seldom been examined, not has the costs of public policies which result in deviations from efficient allocations. In order that public officials be better informed about water allocations, the present effort examines the efficient allocation of water in time frames up to 2020 under several alternative assumtions and calculates that cost of alternative policies. Using mathematical programming techniques, a computer model is developed to determine the supply (marginal cost) and demand (value or marginal product) relationships for agricultural water, given depletions for municipal and industrial (M&I) and wetland …

A Water Resource Management Model, Upper Jordan River Drainage, Utah, Bi-Huei Wang, James I. Felix, Rick L. Gold, Craig T. Jones, J. Paul Riley

Reports

As demands upon available water supplies increase within a river basin, there is an accompanying increase in the need to assess the downstream consequences resulting from changes at specific locations within the hydrologic system. This problem is approached in this study by digital computer simulation of the hydrologic system. Modeling concepts are based upon basic relationships which describe the various hydrologic processes. Within a hydrologic system these relationships are linked by the continuity-of-mass principle which requires a mass balance at all points. Spatial resolution is achieved by considering the modeled area as a series of subbasins. The time increment adopted …

Effects Of Baffles On The Performance Of Anerobic Waste Stabilization Ponds, Stephen B. Nielson, E. Joe Middlebrooks, Donald B. Porcella

Reports

The performance of three baffled model ponds was monitored and compared to the performance of an unbaffled model pond utilizing four hydraulic and organic loading rates. All four ponds were operated simultaneously under the same environmental conditions using a synthetic wastewater.

Removal of organic carbon by the biological system in the different pond configurations only varied from 94-98 percent at the longest detention time (15 days); however, a considerable effect of the baffling was observed at the lower detention times. At a hydraulic detention time of 1.5 days the percent carbon removal was 53, 60, 62, and 70 percent for …

Legendre Coefficients For Series Solution Of The Orientation Distribution Function For Ellipsoidal Macromolecules In Two-Dimensional Laminar Flow, Myrne R. Riley

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The double refraction and viscosity of a suspension of asymmetrical colloidal particles subject to continuous laminar flow vary with the orientation distribution of the suspended particles produced by the shearing field and Brownian motion. Recursion formulas are developed for the Legendre coefficients of the series solution of the orientation distribution function for a suspension subject to two-dimensional laminar flow, thus, extending the works of Peterlin, Wayland, and Scheraga. © 1973.

Test 1136: David Brown 995 Diesel (Also Case 995 Diesel) 12-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT GENERAL CONDITIONS East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers. PREPARATION FOR PERFORMANCE RUNS The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

De Los Sealabs A Los Skylabs, Aldemaro Romero Jr.

Publications and Research

No abstract provided.

¿Respiraremos Algún Día El Agua Del Mar?, Javier Gimeno, Aldemaro Romero Jr.

Publications and Research

No abstract provided.

Chronic Toxicity Of A Copper, Cadmium And Zinc Mixture To The Fathead Minnow (Pimephales Promelas Rafinesque), John G. Eaton

United States Environmental Protection Agency: Publications

Fathead minnows were exposed to a series or concentrations of a copper, cadmium and zinc mixture during a 12.5 month chronic test in water of 200 mg 1^-1 total hardness. The metal concentrations in the mixture were selected on the basis of results obtained during previous chronic exposures to each of the metals individually in the same water. Strict summation of the chronic toxicities of the metals was not indicated when they were tested in combination. Toxic effects of the mixture attributable to copper appeared to be increased, but that attributable to cadmium was reduced. The effects thought to …

A Simplified Flow-Splitting Chamber And Siphon For Proportional Diluters, Duane Benoit, Frank A. Puglisi

United States Environmental Protection Agency: Publications

Simplified flow-splitting chambers and siphons were designed and tested for use with proportional diluters in bioassay systems. The apparatus allows each concentration from the diluter to be thoroughly mixed and divided four ways for delivery to duplicate fry and adult exposure tanks. Test water delivered to each exposure tank varied by only 5-10 per cent of the calculated volumes.

Test 1119: Alis-Chalmers 7030 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT

GENERAL CONDITIONS

East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers.

PREPARATION FOR PERFORMANCE RUNS

The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Chronology Of Army Medical Intelligence, 1941-1973, Robert Bolin , Depositor, Jonathan Clemente

United States Department of Defense Military Intelligence

This “Chronology of Medical Intelligence” lists the chiefs of the Army medical intelligence effort and the designations of the medical intelligence organization.

Interestingly, the first heads of the effort Captain Tom F. Whayne, MC, USA, and LTC Gaylord W. Anderson, MC, AUS, participated in the preparation of the official history of Medical Intelligence during World War II. SEE: Gaylord Anderson, MD, "Medical Intelligence" IN: Preventive Medicine in World War II. Vol IV, Special Fields, ed. COL Robert S. Anderson, MC, USA and Ebbe Curtis Hoff, PhD, MD (Washington DC, Department of the Army, 1969).

Dr. Arthur Turner, a civilian, was …

Inertial Navigation Performance Improvement Realized By The Technique Of Interrupted Alignment, Ralph E. Herndon

Masters Theses

"Present on-aircraft ground alignment gyro bias methods can basically be categorized as (1) periodic maintenance performed by the ground crew, (2) pre-flight calibration requiring a two-position gyro compass alignment or (3) optimal filter estimation of the north gyro bias error.

This thesis discussion presents an interrupted alignment method that allows adequate level axes gyro bias correction without the restrictions associated with a conventional two-position gyrocompass alignment (i.e., a minimum time for bias calibration on a steady aircraft). The interrupted alignment technique allows the pilot to select the navigate mode at any point during gyrocompass and reselect the align mode at …

A Thin Film Evaporator Rate Controller, Daniel Robert Kasterlein

Masters Theses

"A circuit is described which is used to control the evaporation rate of material from a resistance heated boat or electron beam evaporator. The rate controller is used in conjunction with a quartz crystal thickness monitor in a vacuum evaporator"--Abstract, page ii.

Tilt-Table Alignment For Inertial-Platform Maintenance Without A Surveyed Site, Gordon E. Carlson, Max E. Bott

Electrical and Computer Engineering Faculty Research & Creative Works

A method for aligning the rotary tilt table for an inertial-platform maintenance facility without surveying the site is analyzed and evaluated. The method utilizes multiple measurements of the tilt-table azimuth alignment error with different inertial platforms to determine a best estimate of the alignment error. Error analysis indicates that useful facility performance can be obtained with only a small number of measurements. The tilt-table alignment accuracy can be improved as more measurements of the alignment error are made during normal facility operation. © 1973, IEEE. All rights reserved.

A Nuclear Power Plant Simulator, John Jacob Adams

Retrospective Theses and Dissertations

The United States' energy crisis, which has received so much publicity lately, has focused national attention on how we are to meet our energy demands. Proposed energy sources include conventional nuclear power plants, breeder reactor and fusion reactor plants, coal gasification, liquid hydrogen, solar energy, and geothermal energy. All of these except conventional fission plants are still on the drawing board or in the experimental laboratory, and are described briefly. Government and industry are betting heavily on conventional nuclear power plants. ($40 billion already spent by private utilities for 30 operating plants, 60 under construction, and 75 on order.) A …

The State-Space Approach To Network Synthesis, Gary Landis Hasty

Retrospective Theses and Dissertations

No abstract provided.

The Design Of A Digital Data Acquisition System For Jet Engine Testing, Robert Wesley Carter

Retrospective Theses and Dissertations

This research report documents the various types of Data Acquisition Systems in use for testing jet aircraft engines. The cost trade offs and design considerations are explored for systems which employ a digital computer as the prime recording/processing element. The digital computer has revolutionized the data acquisition field, particularly in the testing of high performance jet engines. Test data can be acquired, processed, converted to engineering units, and out via high speed line printers and cathode ray tubes (CRT's). The data acquisition system operates on-line, and interleaves the random requests for data from multiple test cells by using a specially …

Digital Image Processing By The Two-Dimensional Discrete Fourier Transform Method, Lyman F. Joels

Retrospective Theses and Dissertations

No abstract provided.

Accumulative Errors In Low-Level Mos-Fet Multiplexers, Lloyd Daniel Griffin

Retrospective Theses and Dissertations

This paper provides a brief historical discussion of the development of time division low level multiplexing techniques and especially emphasizes MOS-FET multiplexers currently being implemented. Error sources which may affect system accuracy and therefore must be considered in the design of the multiplexer are described. Some of the more significant of these errors: aliasing, interchannel crosstalk, static offset, transient coupled errors, and common-mode injected errors are analyzed and covered in detail. Equations expressing the overall interchannel DC crosstalk and static offset for a generalized multiplexer are derived and presented. Settling errors arising from transient events in time division multiplexers are …