Engineering Commons^™

Test 1157: John Deere 2630 And 2640 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT GENERAL CONDITIONS East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers. PREPARATION FOR PERFORMANCE RUNS The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Test 1159: White Field Boss 4-150 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT GENERAL CONDITIONS East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers. PREPARATION FOR PERFORMANCE RUNS The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Test 1167: Allis-Chalmers 7060 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT GENERAL CONDITIONS East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers. PREPARATION FOR PERFORMANCE RUNS The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Test 1170: Steiger Couger Ii Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT

GENERAL CONDITIONS

East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers.

PREPARATION FOR PERFORMANCE RUNS

The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

The Effects Of Variations In The Excitation Parameters Of Blast Waves On The High Frequency Response Of Circular Rings, Paul John Mirabella

Retrospective Theses and Dissertations

The high frequency response of a circular ring of rectangular cross section interior to a conical shell excited by a blast wave is examined. The ring supports a rigidly attached mass during excitation. It is hypothesized that the response is a function of the four excitation parameters which characterize the loading. These are: peak reflected pressure; characteristic time (pulse duration); wave engulfment time; and circumferential distribution. These parameters are varied over a range of interest in an effort to ascertain the structural sensitivity to such perturbations. A series of tests sponsored by the Department of the Army and the Martin …

Osha's Impact On Industry, Paul Christ Noller

Retrospective Theses and Dissertations

On December 29, 1970, the President signed into law the Williams-Steiger Occupational Safety and Health Act (OSHA) of 1970, which became effective April 28, 1971. The purpose of this act is to assure safe and healthful working conditions for the nation's wage earners. The law provides that each employer has the basic duty to furnish his employees a place of employment which is safe from recognized hazards that cause death or serious physical harm. The implementation of the OSHA Act has been the most extensive intervention into the day-to-day operation of American Industry in history. Originally, employers expressed doubt that …

An Application Of Hamilton's Principle To Diffraction Of Light By Ultrasound, Daniel F. Waterhouse

Retrospective Theses and Dissertations

A covariant form of Hamilton's Principle of Stationary Action is formulated and used to solve the general eiconal equation describing the wave function of light in a medium carrying ultrasound. Tensor notation is reviewed and the tensor form of Maxwell's equations is developed. Boundary equation that the field quantities must satisfy in order for the variation of Hamilton's action integral to be stationary are determined and used to form the generalized eiconal equation of geometrical optics. The rays are introduced and through a canonical transformation the eiconal for the diffracted medium is solved and plotted.

A Simulation Study Of Guest Procedures In A Resort Hotel Complex, Bradley Barraclough

Retrospective Theses and Dissertations

At this time there is an increasing emphasis in Florida on developing large, multipurpose complexes which include shopping, entertainment, and accommodations for tourists. In all cases a major design problem is people transportation. For best efficiency the primary mode of transportation, the car, must be exchanged for other people movers within the complex, which will afford more security, flexibility, and better movement of people to their ultimate destination. Economically speaking, this would not only conserve fuel, but would allow consolidation of automobile parking into a less desirable area and the grouping of facilities for more shopping and recreation convenience. An …

Towards A Design Of Hmo, An Integrated Hardware Microcode Optimizer, James Oliver Bondi

Doctoral Dissertations

"This paper discusses an algorithm for optimizing the density and parallelism of microcoded routines in micro-programmable machines. Besides presenting the algorithm itself, this research also analyzes the algorithm's uses, design integration problems, architectural requirements, and adaptability to conventional machine characteristics. Even though the paper proposes a hardware implementation of the algorithm, the algorithm is viewed as an integral part of the entire microcode generation and usage process, from initial high-level input into a software microcode compiler down to machine-level execution of the resultant microcode on the host machine. It is believed that, by removing much of the traditionally time-consuming and …

A Finite Element Method For Three-Dimensional Analysis Of Metal Forming, Nguyen Don Phu

Doctoral Dissertations

"The importance of metal forming by extrusion was reviewed. A Finite Element Approach was developed to analyze extrusion processes. A brick type linear element and the Upper Bound theorem were used to analyze the extrusion of a cylindrical billet into a square cross-section prism. A minimization technique for a non-linear functional with linear constraints was developed. Different types of boundary conditions were also formulated. A frictionless extrusion was simulated using the computer program developed. Velocity profiles at different sections of the deforming solid were obtained and an average extrusion pressure was predicted for a given area reduction ratio.

Extrusions from …

Reduced Third Order Intermodulation Distortion Utilizing A Push-Pull Class C Vhf Transistorized Amplifier, Norman B. Mosher

Retrospective Theses and Dissertations

In a transistorized push-pull amplifier, third order intermodulation distortion was effectively reduced at VHF frequencies with an output power of two watt. The non-linear distortion of the amplifier is modeled using a power series. The resulting expression is used as the basis for choosing the push-pull configuration to reduce the third order intermodulation distortion. The amplifier was built and tested, and the experimental results compare favorably with the theoretical results. The level of the third order intermodulation distortion is found to be at least 30 dB below the interfering signal level.

A Special Purpose Modem Design, William Lester Schulte

Retrospective Theses and Dissertations

A special purpose modem has been designed to fill the interface requirements peculiar to RCA's DatawayTmk hotel/motel data management system. The modem interface operates on dedicated telephone quality wiring over distances up to 4000 feet using frequency shift keying. A data rate of 2880 bits per second is achieved through the interface. This report discussed the requirements of the interface and details the worst case design of the modem transmitter and receiver sections. The approach used relies heavily upon the use of digital logic circuitry in the modulation and demodulation of the FSK signals.

Comparative Cost Analysis Of Implementing Computer Assisted Instruction On General Purpose Computers, Minicomputers, Or Time-Shared Systems, William Henderson Trueheart Junior

College of Graduate Studies: Theses & Dissertations (1964–2006)

No abstract provided.

Evaluative Study Of A Proposed Municipal Pyrolysis Installation, Leon Breckenridge

All Master's Theses

This paper discusses an alternative to sanitary landfills as a method of disposing of municipal solid waste. The alternative means is a pyrolysis-gasification process for the disposal of solid wastes and the production of energy in the form of a gas of relatively low energy content.

Characteristics of typical municipal solid wastes are discussed. A discussion of the pyrolysis process is included along with other pertinent technical information. A method for utilization of the energy produced from pyrolysis is presented.

A Study Of The Feasibility In Obtaining The Kinetics Of Various Ordering Phenomena Of The Iron Aluminum System Utilizing The Mössbauer Effect, Lloyd Rollan Chapman

Masters Theses

"The determination of the kinetics of ordering for various ordering phenomena of the Iron-Aluminum system utilizing exclusively the Mössbauer effect technique is shown to be infeasible for all but a highly restrictive consideration from experimental as well as theoretical evidence. Also, the possible use of the Mössbauer effect for the analysis of other ordered systems is discussed.

An alternative method for the acquisition of the needed information utilizing diffraction and Mossbauer techniques is presented recognizing the need for a computer fitting analysis of the complex Mössbauer effect spectra. However, at this stage of investigation, no experimental work has been performed …

The Effects Of Washout In Polydispersed Metalic Aerosols, Jerry N. Burford

Masters Theses

"Experimental Collection Efficiencies are presented for drops of approximately 0.1cm radius falling through aluminium, magnesium and molybdenum oxide polydispersed aerosols. The experimentation was conducted in two identical cylindrical chambers, one being used for aerosol washout, and the other for allowing the aerosol to decay normally. The Collection Efficiency data were thus determined by comparing the aerosol concentration changes in the two chambers. The rather strong effects that induced micro-turbulence and relative humidity have on aerosol collection and aerosol decay were observed and are discussed"--Abstract, page ii.

Detection Of Impurities In Zinc Sulfate Electrolytes By Cyclic Voltammetry Techniques., Bruce Alan Lamping

Masters Theses

"A cyclic voltammetric technique has been developed for quantitatively detecting the presence of active chemical species present in zinc sulfate electrolytes. The experimental apparatus consisted of a pyrex "H" cell, an Al cathode encased in a Teflon holder, a carbon anode and a mercurous sulfate reference electrode. Voltammograms were obtained from industrial, purified neutral leach solution (Cominco Ltd., Trail, B.C.) acidified to give a final concentration of 0.77 M Zn⁺⁺, 1 M H₂SO₄. The polarization curves were then evaluated and used as a reference standard to compare with results obtained when various organic and …

A Study Of Some Heuristic Models For Predicting The Reflection From Spherical Surfaces., Bruce Wayne Rau

Masters Theses

"Four heuristic models' available for predicting the behavior or radiation Non regularly reflected from spherical surfaces have been studied. The four models include: the classical Lambert, the s-factor as deduced by Look, the Lommel-Seeliger, and the Euler's approach. Because each of these analyses was deduced for flat plate geometry, it was first necessary to integrate these flat plate expressions over the surface of a sphere to develop appropriate expressions for the power rejected from the surface of a sphere based upon e ach of the above theories. As an integral part of this investigation, various basic quantities were listed (i. …

Data Acquisition And Analysis System For Computer Modal Analysis Of Automotive Exhaust Emissions., Edward Leroy Mabie Jr.

Masters Theses

"A data acquisition and reduction method for modal analysis of undiluted automotive exhaust emissions is presented. 'The procedure on which this method is based ·wa.s developed and presented in a. paper by Donald L. Stivender, in 1971, entitled, "Development of a Fuel-Based Emission Measurement Procedure." This method is presented as a. viable a.1ternative to the diluted constant volume sample by bag collection technique specified in the federal test procedure for emissions from light duty vehicles.

The instrumentation used for the acquisition of data was the type normally used for automotive emission studies. The four instruments used for exhaust gas analysis …

Minorities Are Not Prepared For Accepting Jobs In The Petroleum And Petrochemical Industries., Freddie Lorace Thompson

Masters Theses

"A survey has been made from nine petroleum and petrochemical companies in the Houston area to get recommendations on the training required for minorities to secure jobs and advance in these industries. Information gathered through this survey consist of the following; (1) recommendations on careers minorities should concentrate their training to secure jobs in these industries; (2) the demand for qualified technical minority graduates far exceeds the supply; (3) a vehicle whereby minorities can be trained and inducted into the petroleum and petrochemical industries; and (4) the companies surveyed are putting forth an honest effort to increase their job mix …

Effect Of Sweeping Sinusoidal Excitation On Nonlinear Dynamic Systems., Md. Mosharraf Hossain

Masters Theses

"The response of viscous damped, cubic spring systems to excitations having exponentially varying frequency cannot be written in a closed form. This report summarizes a numerical investigation of hardening and softening cubic systems influenced by these excitations and provides information concerning the effects of varying viscous damping, system nonlinearity, and excitation sweep rate on system behavior near resonance. Results are reported in terms of maximum response attained during sweeping and the frequency at which maximum response occurs.

It has been found that if hardening cubic systems are subjected to sweeping excitations wherein the frequency sweeps down through resonance, the maximum …

Propane-Carbon Dioxide And Propylene-Carbon Dioxide Mixture Adsorption In 5a Molecular Sieves., Bui Van Hong

Masters Theses

"Measurements of the adsorption on SA molecular sieves have established that at 1 atmosphere and 24.0°c, both systems, propane-carbon dioxide and propylene-carbon dioxide, form ideal solution adsorbed phases. Total mass adsorbed ranges from 112 to 207 milligrams/gram sorbent for propane-carbon dioxide and from 130 to 207 milligrams/gram sorbent for propylene-carbon dioxide"-- Abstract, p. ii

Bidding And Negotiation Of Government Funded Contracts With Inflationary Considerations., David Thurman Hearst

Masters Theses

"The traditional government contract type has played an important role in the economy of the United States. In its most used type, that of fixed price, it represents a stabilizing factor in the cycles of the business world. However, recently this type of contract has been affected by the nation's most recent plague, double-digit inflation.

Inflation attacks almost all phases of stability in the economy and in contract negotiations and bidding techniques. It erodes the monetary unit of the economy, distorts forecasting models, and creates potential ruin for contractors due to uncertainty in costs.

Research pertaining to government funded contracts …

The Geology And Hydrogeology Of The New Lead Belt, Missouri, Charles Scott Fletcher

Masters Theses

"In order to analyze the effects of pumping groundwater from underground lead mines upon present groundwater resources of the New Lead Belt area, the geology and hydrogeology of that area must first be determined. The primary method of investigation of this analysis was interpretation of ecologic and hydrogeologic data taken from water well logs and mineral exploration well logs, with supplemental information supplied by published and unpublished literature sources. From all these sources of data, structural contour maps of the Precambrian erosional surface; the tops of the Lamotte, Bonneterre, and Davis Formations; isopachous maps of the Davis and the Lamotte/Bonneterre …

2.5 Ampere Dc Solid State Power Controller, John Anthony Gilbert

Masters Theses

"The 2.5 Ampere DC Power Controller presented in this paper is a device which combines the properties of both relays and circuit breakers solely by means of solid state circuitry to perform the power functions that (1) provide DC power to electrical loads by means of power transistor switching, and (2) provide electrical protection by generating trip out characteristics similar to those of thermal circuit breakers. Furthermore, the control of this device is completely computer compatible, i.e., it is commandable from digital logic levels.

The text of this report discusses the requirements, specifications, and design of this power controller. In …

A Comparative Analysis Of The Capabilities Of Three Stereo Radar Techniques When Operating In The Presence Of System Errors, George L. Bair

Masters Theses

"Three stereo radar techniques for producing stereo images from which topographic data and maps may be obtained are described and their performance in the presence of system errors is determined. The techniques are: an improved single flight technique which uses a combination of two antenna beam characteristics which permits terrain illumination from nearly the same aircraft position, a previously proposed single flight technique which uses two horizontal linear arrays generating vertical fan beams at different azimuth angles, and an existing two flight technique which uses a horizontal array generating a side-looking fan beam.

Error analyses are performed to determine the …

A Digital Simulation Of The Statistical Properties Of Ionospheric Scintillation, William Frederick Deckelman

Masters Theses

"This thesis shows that a bandlimited bivariate-normal time series is a useful model for the envelope of scintillating radio signals traversing the ionosphere. A software computer model is designed and its parameters varied to obtain good fits of the fade duration distribution of the time series generated by the model with that of an actual block of ionospheric scintillation data. The power spectrum of the actual time series corresponding to the in-phase and phase quadrature components of ionospheric scintillation is shown to lie between that of a first- and second-order Butterworth filter through comparison with model generated data"--Abstract, page ii.

A Computerized Simulation Of A Personal Rapid Transit System., James Richard Cromer

Masters Theses

"The movement of people from an origin to a destination has become a complex and sometimes severe problem, The present modes of transportation available, which include the rapid rail systems, bus transit service, and the personal automobile, have proven quite ineffective in dealing with the situation, A new concept in the transportation area is that of Personal Rapid Transit (PRT). This concept offers a promising solution to many of our people and goods movement difficulties. Before this new system can be implemented it is necessary that various design, construction, and operational criteria be evaluated to determine the optimal system to …

Feed-Forward Control Circuit For A Computer Controlled Dc Motor - Ac Generator Set., Richard Allan Smith

Masters Theses

"The current trend of development of generation in electric utility systems is toward complete on-line computer control of real and reactive power generation. In keeping with this trend this work is to design, construct and operate a laboratory model of a computer-controlled power system generator. The equipment design is guided by a desire to allow real time computer control and program assignment of generation levels.

This work is intended as a first step in the development of a complete on-line computer-controlled laboratory model of a power system. It will make possible the study of state-of-the-art methods of operation of power …

Design And Operation Of A System For The Measurement And Display Of A Railroad Train Length., Paul Clement Kriegshauser

Masters Theses

"This thesis describes the design, operation, and application of a system for the automatic measurement of a railroad train length. The system is based on sensing individual wheel crossings with two commercial variable-reluctance wheel sensors. The individual wheels are not counted as they are sensed, instead the system uses the information to compute the train velocity. These sensors are separated a known distance on the railroad track at the location a length measurement is desired. The train may pass these sensors at any desired speed and in either direction. The developed system is not dependent on car length or number …