Engineering Commons^™

Test 1303: Case 2590 Powershift Diesel 12-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Radio Frequency Sputtering Deposition And Characterization Of Thin Ferroelectric Titanate Film On Silicon Substrates, Cheng-Cheng Hu

Electrical and Computer Engineering ETDs

This work was done to achieve two goals: (1) To investigate and document the optimum deposition conditions for thin ferroelectric BaTi03 film on doped silicon substrates by r.f. sputtering; (2) to characterize the electrical properties of the metal-insulator-semiconductor (MIS) structure with BaTi03 as insulator and the memory characteristics involved.

Test 1302: Case 2390 Powershift Diesel 12-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Plastic Analysis And Tests For Rigid High-Rise Composite Frames, J. Hartley Daniels, Dirk P. Duplessis, Thomas Wenk

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

No abstract provided.

Cpacs Happenings (April 1979 Newsletter), College Of Public Affairs And Community Service, University Of Nebraska At Omaha

CPACS Newsletters

The College of Public Affairs and Community Service (CPACS) newsletter that reported on the news, collaborations, events, and general happenings of the UNO College of Public Affairs and Community Service. This newsletter has had many names and variations over the years including SPACS Newsletter (1973); Newsletter of the College of Public Affairs and Community Service (1973-1974): Happenings (1974-1980s); and the current e-newsletter titled the CPACS Collective (2021-)

Ole Miss Engineer 1979

Ole Miss Engineer

No abstract provided.

Coupling Efficiency And Alignment Sensitivity Of Single Mode Optical Fibers, James Mathew Martin

Retrospective Theses and Dissertations

Coupling efficiency an alignment sensitivity models for the coupling of light from a fundamental mode Gaussian light beam into a single mode optical fiber are given. Experimental results are presented which verify the coupling and misalignment predictions of the models. Data were taken at two wavelengths: 0.6328 and 0.8460 micrometers. The light sources were a HeNe laser and a GaAlAs laser respectively. Coupling efficiencies were measured versus beam spot size; and lateral, axial and angular misalignments of the beam and fiber axes.

Optimization Of Stormwater Management Practices And Processes, Mark Michael Calabrese

Retrospective Theses and Dissertations

In recent years, stormwater has been found to be a major source of pollution to receiving waters. Major research efforts have been directed in this area, primarily as a result of the Federal Water Pollution Control Act and Public law 92-500, the 1972 Amendments to the act. Yet, a need remains for more data in the field of stormwater management. Such needs include cost-performance data and planning methodologies to optimally select best management practices (BMP's). The research culminating in this report addresses these needs. A computer program, "MANAGE", has been written to generate cost/efficiency curves, and uses these curves to …

Critical Exposure Pathways: An Analysis Of The Environmental Impact Of Gaseous Effluents From Light-Water-Cooled Reactors, Robert Danna

Retrospective Theses and Dissertations

The analysis of the environmental impact of routine radioactive gaseous releases from operating nuclear power stations is discussed using a radiation dose assessment. This analysis includes a discussion of the origin of radionuclide effluents, a discussion of federal policies, and a calculation of radiation doses to man. A model of estimating the radioactive dose from gaseous effluents from light-water-cooled reactors is described using guidelines described in the Code of Federal Regulations and the Nuclear Regulatory Commission's Regulatory Guides. The environmental impact of these sources is then analyzed using dose rates calculated along critical exposure pathways for various radioactive nuclides. Examples …

A Computer Program For Analyzing Moist Air In Fin And Tube Crossflow Heat Exchangers, Robert F. Stricker

Retrospective Theses and Dissertations

A computer model of a fin and tube air-to-air heat exchanger is presented. The model incorporates a computational scheme to account for latent effects due to small amounts of moisture in one or both fluid streams. A testing program is described which was performed in order to mathematically characterize the heat transfer and pressure drop relationships of the tube with turbulator used in the heat exchanger. These relationships are included in the computer model. A comparison of the computer model to heat exchanger test data indicates that the computer model may be relied upon to provide design and analysis information. …

Microcomputers: An Alternative For Digital Controllers, Richard Brooke Wavell

Retrospective Theses and Dissertations

Two candidate microprocessors are selected to demonstrate that microprocessors can be effectively utilized in digital control applications. The Intel 8085A-2 is selected to represent 8-bit microprocessors and the Intel 8086 is selected to represent 16-bit. A baseline second order digital filter algorithm is developed for comparison of the performance of the two microprocessors for both software and hardware multiply implementations. Emulation techniques are utilized to facilitate performance comparison, without large investments in software and hardware development. In addition, they provide a method for evaluating new microprocessors, before hardware becomes available. The emulations are then used to verify and to determine …

Energy In Agriculture: Energy For Greenhouses Part 1: Energy Conservation, George A. Duncan, John N. Walker, Larry W. Turner

Agricultural Engineering Energy Series

The increased cost and scarcity of all fuels have affected the greenhouse owner as badly as any segment of industry. For some, crops have been damaged or lost. For others, it has reduced the margin of profit. Growers, manufacturers, suppliers, horticulturists, engineers and many others have studied the situation thoroughly in order to come up with viable solutions and alternatives for conserving fuel.

Energy Fact Sheet: Heat Pumps For Residential Heating And Cooling: Some Questions And Answers, Larry W. Turner

Agricultural Engineering Energy Series

WHAT IS A HEAT PUMP?

A heat pump is an electrically-powered refrigeration cycle device which is capable of providing both heating and cooling to a residence. In the summer, it operates like an air conditioner by "moving" heat from inside the house to the outside. In the winter, the refrigerant flow is reversed, "moving" heat into the house by further chilling the already cold outside air and transferring the heat gained in the process to the inside.

An Evaluation Of Permissive Left-Turn Phasing, Kenneth R. Agent

Kentucky Transportation Center Research Report

In this study, exclusive left-turn phasing was replaced with permissive left-turn phasing at four trial intersections. Delay and accident studies were done before and after the trial installations. Also, a questionnaire was issued to determine public opinion concerning the signals.

The use of permissive-turn phasing resulted in a 50-percent reduction in left-turn delay and a 24-percent reduction in total delay compared to exclusive phasing. The permissive left-turn phasing did result in an increase in left-turn accidents. Other accident types, such as rear-end accidents, did not change. The number of left-turn accidents decreased as drivers became more familiar with the signals. …

The Effectiveness Of Regulatory School Flashers In Reducing Vehicle Speeds, Charles V. Zegeer, Robert C. Deen

Kentucky Transportation Center Research Report

Pedestrian safety for school-age children has been a growing problem in recent years. Children between the ages of five and nine represent less than 10 percent of Kentucky's population but over 16 percent of all pedestrian fatalities. A study was conducted to evaluate the effectiveness of regulatory school flashers used in school zones to reduce vehicle speeds and alert motorists of pedestrian activity and to determine measures which promote safety in school zones.

Speed studies were conducted during flashing and non-flashing periods at 48 school zones where regulatory school flashers were used. The locations involved a variety of speed limits …

Fatigue Damage Of Flexible Pavements Under Heavy Loads, James H. Havens, Herbert F. Southgate, Robert C. Deen

Kentucky Transportation Center Research Report

A modified Chevron N-Layer computer program has the capability of calculating the "work" done by the total load on a given load group. Earlier analyses of AASHO Road Test sections and test vehicles had permitted the development of damage factor relationships. This paper presents seven, namely two-tire and four-tire single axles, tandems, triaxles, and four-axle, five-axle, and six-axle groups. The two-tire axle (front or steering axle) has the most severe damage relationship. The 80-kN (18-kip) four-tire single axle was used as the reference axle and was assigned a damage factor of 1.0 for a specific amount of "work". Other axle …

Synchronization Strategies, Mishell J. Stucki, Jerome R. Cox Jr

All Computer Science and Engineering Research

Computing systems are now frequently composed of independently clocked subsystems that cooperate to perform the function desired for the whole. This type of architecture has many advantages and promises to be the standard for the foreseeable future. With the trend towards more and more gates per chip, the number of chips per subsystem gets smaller and smaller, and we can expect to soon see one or more subsystems per chip. This transition will require contributions from disciplines previously outside the field of chip design, and every issue will have to be carefully worked out beforehand because debugging chips of this …

A Co-Op Advertising Information System, Kay C. Gardner

Retrospective Theses and Dissertations

This report presents the development of a business information system for co-op advertising. An underlying assumption is that information systems add value to an organization. It is an application of data bank theory, and demonstrates the techniques required to maintain a current information system, i.e., add, change, and delete capabilities. The master file is sequentially accessed to produce reports by participation percentage, classification, or expiration date.

Environmental Aspects Of The Nuclear Fuel Cycle And High-Level Radioactive Waste Disposal, Robert S. Kent

Retrospective Theses and Dissertations

An assessment of the environmental effects of the nuclear fuel cycle industries is discussed, reactor waste inventory and standards are presented, and the alternatives for high-level radioactive waste disposal reviewed, with particular attention being given to disposal in deep geological formations on land. One of the major concerns regarding potential impacts of the nuclear fuel cycle industries is the lack of a definite and proven method of disposal of the high-level radioactive wastes from light water moderated reactors. The problem is expected to become more pressing as the nuclear power industry and the associated radioactive waste inventories grow in the …

An Introduction To The Winograd Discrete Fourier Transform, Janice S. Agnello

Retrospective Theses and Dissertations

This paper illustrates Winograd's approach to computing the Discrete Fourier Transform (DFT). This new approach changes the DFT into a cyclic convolution of 2 sequences, and illustrates shortcuts for computing this cyclic convolution. This method is known to reduce the number of multiplies required to about 20% less than the number of multiplies used by the techniques of the Fast Fourier Transform. Three approaches are discussed, one for prime numbers, one for products of primes, and lastly one for powers of odd primes. For powers of 2 Winograd's algorithm is, in general, inefficient and best if it is not used. …

A Heuristic Approach For The Scheduling Of Technical Training Courses In The U.S. Navy, William H. Lindahl

Retrospective Theses and Dissertations

The generation and maintenance of feasible schedules for Navy training courses are labor intensive throughout the Naval Education and Training Command. The major constraints affecting this scheduling are planned input requirements and the suitability/availability of instructors, equipment, and facilities. An additional constraint is that schedules must be established for the current year, updated and revised as necessary, and projected for the out-year planning requirements of the 5-Year Defense Plan. This thesis documents the essential components of scheduling for training at a representative training center, the Fleet Anti-Submarine Warfare Training Center, Pacific. It provides details for the automation of the current …

Scrubber Design For Phosphoric Acid Production Facility, Edward E. Mayer

Retrospective Theses and Dissertations

This report is an examination of the practical design of a phosphoric acid production facility wet scrubber. It includes a brief background of the Florida Phosphate Industry, in addition to the rules and regulations affecting the emission of fluoride contaminates. The theoretical aspects of a packed absorption tower is discussed prior to the actual design of a cross-flow wet scrubber of the type typically found in the Florida Phosphate Industry.

An Application Of A Single Chip Slave Microcomputer As An Intelligent Interface, Thomas J. Riordan

Retrospective Theses and Dissertations

This thesis describes the operation of an intelligent controller existing between a computer system and a peripheral. The intelligent controller is implemented with an INTEL universal peripheral interface, UPI-41, single chip slave microcomputer. The interfaces between the controller and the computer system, and the controller and the peripheral are described in detail, as are the firmware and internal facilities of the controller itself. An evaluation of system operation is presented and, finally, the organizational philosophy of the system is discussed. Located within the appendices are a system schematic and listing of the controller program.

Heavy Metals In The Water And Wastewater Systems Of The University Of Central Florida, William Keith Mccully

Retrospective Theses and Dissertations

In large enough quantities, heavy metals may be detrimental to human health. Metals in raw water may pass through a water treatment plant without being completely removed. Once in a the distribution system, the water may experience metal pick-up due to corrosion. During the course of this study, an attempt was made to determine the heavy metal concentrations in the University of Central Florida's potable water systems. Samples were fun on the plasma spectrophotometer, Spectraspan III, and analyzed for heavy metal content. The results indicate pick-up of Fe, Al, Cu, and Zn in the distribution system. The arsenic and lead …

Curing And Flow Of Thermosetting Resins For Composite Materials Pultrusion, Howard L. Price Jr.

Mechanical & Aerospace Engineering Theses & Dissertations

Fibrous composite materials for mechanical and structural applications often are expensive due to high labor costs. One economical way of making composites is pultrusion, a manufacturing process in which resin-impregnated fibers are pulled at a constant speed through a heated die which shapes the resin-fiber mass and cures the resin. Most of the work which has been done on the process has been of an empirical nature, with limited understanding of the process principles. Most of the experience with pultrusion has been gained with polyester resins and glass fibers. Very little experience has been gained with higher performance, more costly …

Validation Of A Transient Simulation Program (Trnsys), Brian F. Goldiez

Retrospective Theses and Dissertations

Although a Transient Simulation Program (TRNSYS) has become a widely used model for simulating a solar energy system, there has not been extensive work done in validating this model with actual data. The approach used to validate this model consisted of a modular buildup of components with validation for each module. Extreme care was taken in choosing the necessary parameters to model each component. Where parameters were not given, they were either derived or reasonable values were selected based upon general conditions prevailing in Central Florida or conditions which are generally true for certain solar hot water systems. The intent …

Irish H & V News

Building Services Engineering

No abstract provided.

Irish H & V News - April & May Combined

Building Services Engineering

No abstract provided.

Transformation Of Fresnel’S Interface Reflection And Transmission Coefficients Between Normal And Oblique Incidence, R. M.A. Azzam

Electrical Engineering Faculty Publications

If w denotes an interface Fresnel reflection or transmission coefficient for s- or p-polarized light at an oblique angle of incidence ø, and z denotes the same coefficient at normal incidence, we find that w is an analytic function of z, w = ƒ(z), that depends on ø but not on the specific optical properties of the two media on both sides of the interface. All four functions that correspond to the four distinct Fresnel coefficients and their inverses are determined. We single out for detailed examination, as an example, the relationship between the reflection of s -polarized light at …

Scalar‐Wave Approach For Single‐Mode Inhomogeneous Fiber Problems, Lee W. Casperson, Cavour W. Yeh, W. P. Brown

Electrical and Computer Engineering Faculty Publications and Presentations

It has generally been accepted that accurate results may be obtained using the scalar‐wave approach to solve problems dealing with inhomogeneous multimode guided‐wave structures. The problem of the applicability of the scalar‐wave approach to obtain wave propagation characteristics in single‐mode fiber or integrated optical circuit guides with inhomogeneous index profiles is examined in this paper. It is shown that if certain limiting conditions are satisfied, the scalar‐wave approach will yield valid results for single‐mode structures. These limiting conditions are usually satisfied by many practical single‐mode inhomogeneous fibers or IOC structures.