Engineering Commons^™

Exploring The Feasibility Of The Resonance Corridor Method For Post Mission Disposal Of High-Leo Constellations, Payton G. Porter

Master's Theses

In the upcoming decade, the proliferation of high-LEO constellations is expected to exceed 20,000 objects, yet comprehensive Post Mission Disposal (PMD) strategies for these constellations are currently lacking. With the inherent challenges of efficiently deorbiting satellites from High-LEO orbits, there arises an urgent need to explore innovative approaches. Building upon insights garnered from the ReDSHIFT project and anticipating the proliferation of high-LEO constellations such as OneWeb, TeleSat, and GuoWang, this thesis delves into the potential viability of the Resonance Corridor Method for PMD. The investigation encompasses key metrics, including deorbit timelines and $\Delta v$ requirements to meet regulatory standards or …

A Federation Of Sentries: Secure And Efficient Trusted Hardware Element Communication, Blake A. Ward

Master's Theses

Previous work introduced TrustGuard, a design for a containment architecture that allows only the result of the correct execution of approved software to be outputted. A containment architecture prevents results from malicious hardware or software from being communicated externally. At the core of TrustGuard is a trusted, pluggable device that sits on the path between an untrusted processor and the outside world. This device, called the Sentry, is responsible for validating the correctness of all communication before it leaves the system. This thesis seeks to leverage the correctness guarantees that the Sentry provides to enable efficient secure communication between two …

The Pressure Distribution Of Rotating Cylinders Using An Onboard Wireless Data Acquisition System, Nathan Eller

Master's Theses

This thesis presents a novel, cost-effective method for mapping the pressure distribution on a rotating cylinder in cross flow, a phenomenon central to the Magnus effect. Utilizing commercial-off-the-shelf (COTS) micro-electromechanical system (MEMS) pressure sensors, a high-resolution data acquisition system was developed and integrated into a rotating cylinder model. Compared to traditional approaches, such as slip rings or one-off designs, this method proved significantly cheaper and faster while achieving comparable or superior resolution. The experimental setup, including a modified continuous rotation technique and adaptable model design, facilitated rapid testing across a broad range of Reynolds numbers and reduced frequencies, exceeding the …

Enhancing Direction Finding Accuracy In Perturbed Digital Arrays Via Rf Ranging-Based Self Calibration, Ariel Freiman

Master's Theses

Direction finding with radio-frequency (RF) waves have numerous applications in radio navigation, wireless localization, emergency aid, and air traffic control, among others. Direction-finding using digital arrays outperforms traditional analog techniques but requires precise knowledge of the location of the array elements to obtain accurate results. Array perturbations can lead to algorithm failures and false detection, compromising direction-finding capabilities.

This research proposes implementing a Matched Filter - Least Square (MF-LS) algorithm for Two-Way Ranging (TWR) to enhance direction-finding accuracy in arrays with perturbed element locations. The MF-LS algorithm leverages the properties of matched filters to accurately determine element positions by measuring …

Effective And Sustainable Strategies For Federally Qualified Health Centers To Engage Young Adults, Olivia Mcnulty

Master's Theses

Federally qualified health centers (FQHCs) are instrumental in providing top tier healthcare and other resources to underserved populations. Whether they administer services in house or refer patients to other providers, FQHCs aim to provide comprehensive primary and preventative care services to people of all ages. They offer a range of services, from doctor and dental appointments to mental health and substance abuse counseling, regardless of a patient’s insurance status. To receive funding, FQHCs must follow the regulations and quality standards set forth by groups like the Joint Commission on Accreditation of Healthcare Organizations (JCAHO) and the Health Resources and Services …

Product Design For Repairability: Identifying Failure Modes With Topic Modeling And Designing For Electronic Waste Reuse, Claire J. Franz

Master's Theses

Design for repairability is imperative to making products that last long enough to justify the resources they consume and the pollution they generate. While design for repairability has been gaining steady momentum, especially with recent advances in Right to Repair legislation, there is still work to be done. There are gaps in both the tools available for repair-conscious designers and the products coming onto store shelves. This thesis work aims to help set sails in the right direction on both fronts.

This research explores the use of topic modeling (a natural language processing technique) to extract repairability design insights from …

Sequential Memory Generation For Cognitive Models, Eben Miles Sherwood

Master's Theses

Understanding the process of memory formation in neural systems is of great interest in the field of neuroscience. Valiant’s Neuroidal Model poses a plausible theory for how memories are created within a computational context. Previously, the algorithm JOIN has been used to show how the brain could perform conjunctive and disjunctive coding to store memories. A limitation of JOIN is that it does not consider the coding of temporal information in a meaningful manner. We propose SeqMem, a similar algorithmic primitive that is designed to encode a series of items within a random graph model. We investigate the feasibility of …

An Analysis Of Indoor Air Quality At Cal Poly For Sensor Design, Isabella M. Santi

Master's Theses

Prior research has shown that indoor air quality (IAQ) impacts cognitive performance. At Cal Poly, many older buildings are unable to maintain appropriate IAQ because of their outdated ventilation systems and the increasing number of students in the rooms. This work analyzes the IAQ of different buildings at Cal Poly, with a focus on Building 20. Carbon dioxide, temperature, and relative humidity inside classrooms are collected using an integrated circuit sensor and a microcontroller. A total of 38 hours of data was collected, with 22 of those hours in Building 20 specifically. We find that unlike temperature and relative humidity, …

Preliminary Analysis Of A 12u Astronomy Cubesat, Charles Van Steenwyk

Master's Theses

The explosion of exoplanet astronomy has led to thousands of new discoveries and opportunities to be explored. The ability to capture images and perform meaningful science has resulted in an abundance of follow-on missions, surveys, and fostered a community of amateur astronomers in the last ten years. This success mirrors the development of CubeSats, which have proved an immensely popular way for students of all levels to access space and collect data. Multiple CubeSats have been developed to observe and characterize single exoplanet tran- sits, showing that this class of mission is possible. However, there is currently no mission designed …

Development Of A Deep Learning Algorithm Using Electromyography (Emg) And Acceleration To Monitor Upper Extremity Behavior With Application To Individuals Post-Stroke, Nathan Dodd

Master's Theses

Stroke is a chronic illness which often impairs survivors for extended periods of time,

leaving the individual limited in motor function. The ability to perform daily activities

(ADL) is closely linked to motor recovery following a stroke. The objective of

this work is to employ surface electromyography (sEMG) gathered through a novel,

wearable armband sensor to monitor and quantify ADL performance. The first contribution

of this work seeks to develop a relationship between sEMG and and grip

aperture, a metric tied to the success of post-stroke individuals’ functional independence.

The second contribution of this work aims to develop a deep …

A Hybrid Computer To Solve The Selective Harmonic Minimization Problem In Single-Phase Inverters, Dillon Nguyen

Master's Theses

Power electronics possess forms of non-ideality due to the nonlinearity present in physical switches. These switches are driven with pulse width modulation (PWM), which properly down-converts or up-converts based on converter topology. When these switches turn on or off, they introduce the main proponent of efficiency loss: harmonics. This becomes a nonlinear optimization problem with many converters. The solution proposed in this thesis is an analog/digital hybrid computer that utilizes the speed of analog computation and the accuracy of digital computing together. A Plexim RT Box provides the programmability needed for algorithms, while the analog circuit provides low-power, high-speed computation …

Optimal False Data Injection (Fdi) In Simulated Cooperative Adaptive Cruise Control (Cacc) Systems, Lovro Dukic

Master's Theses

In the rapidly advancing field of autonomous vehicles, ensuring the security and reliability of self-driving systems is crucial. Autonomous vehicle systems, such as cooperative adaptive cruise control (CACC), must undergo significant research and testing before their integration into commercial intelligent transportation systems. CACC considers multiple vehicles in close proximity as a single entity, or platoon, with each vehicle equipped with a controller that uses sensor-based measurements and vehicle-to-vehicle (V2V) communication to control inter-vehicle spacing. While this system offers numerous potential benefits for traffic safety and efficiency, it is also susceptible to False Data Injection (FDI) attacks, which can cause the …

Design Of A Dynamic, Reconfigurable, Self-Balancing Battery Pack, Alexander Hallett Neiman

Master's Theses

This thesis details the design and testing of a reconfigurable battery array. Reconfigurable battery arrays, specifically for mobile applications, have the potential to reduce or eliminate use of auxiliary charging, balancing, and inverter systems. Design work included a bidirectional solid state switch and a cell-to-cell bidirectional current-limiting power converter. While the overall efficiency, size, and cost of the battery pack was not competitive with existing options, it demonstrated cell-to-cell balancing and native four-level square wave AC inverter output with an array of only two cells. This demonstrates viability of the concept as well as reveals important requirements and safety features …

Design And Assembly Of A Variable Buoyancy System For An Autonomous Underwater Vehicle, Evan Brown

Master's Theses

Autonomous underwater vehicles (AUVs) play a vital role in the surveillance and mapping of our oceans, often requiring extensive travel in extreme environments. These data-gathering missions benefit from extended durations, making the minimization of power consumption a key consideration in AUV design. One effective strategy to reduce energy use in AUVs is to implement a variable buoyancy system (VBS) for depth control. The purpose of this work is to design, develop, test, and model a variable buoyancy system to enhance the efficiency and capabilities of a high-speed, long-range AUV.

After evaluating various VBS designs, a piston-cylinder buoyancy system was selected …

Gps/Imu Board, Luke Chen, Steve Tran

Electrical Engineering

Providing information on a vehicle’s location during a competition can be used to provide greater insight to progress the car is making or what portion of the track caused failure. As a result, we will be designing a board that includes a Global Positioning System (GPS) and Inertial Measurement Unit (IMU) module to provide position coordinates, which is driven by an STM32 processor to feed into the DAQ through Controller Area Network (CAN) protocol.

The GPS module will produce an initial positioning and will continue to do so unless it is unable to create a solution, possibly due to over-arching …

2-Channel Eeg Neurofeedback System, Tim Erwin, Donna Nikjou, Sebastian Turkewitz

Electrical Engineering

This work describes the design of an EEG-based neurofeedback system which provides users with real-time feedback on their level of focus or relaxation. By analyzing the spectral content of the brain activity measured via scalp electrodes, focus and relaxation levels can be quantified. Based on these measurements, live feedback in the form of moving bar graphs is provided to users, allowing them to gain awareness of their mental-state and more efficiently learn how to consciously relax or focus. This project covers the design of the system, including amplification and filtering stages, digitization, and signal processing. The system interfaces with a …

Comparison Of Pm-Hip To Forged Sa508 Pressure Vessel Steel Under High-Dose Neutron Irradiation, Wen Jiang, Yangyang Zhao, Yu Lu, Yaqiao Wu, David Frazer, Donna P. Guillen, David W. Gandy, Janelle P. Wharry

Materials Science and Engineering Faculty Publications and Presentations

Powder metallurgy with hot isostatic pressing (PM-HIP) is an advanced manufacturing process that is envisioned to replace forging for heavy nuclear components, including the reactor pressure vessel (RPV). But PM-HIP products must at least demonstrate comparable irradiation tolerance than forgings in order to be qualified for nuclear applications. The objective of this study is to directly compare PM-HIP to forged SA508 Grade 3 Class 1 low-alloy RPV steel at two neutron irradiation conditions: ∼0.5–1.0 displacements per atom (dpa) at ∼270 °C and ∼370 °C. PM-HIP SA508 experiences greater irradiation hardening and embrittlement (total elongation) than forged SA508. However, uniform elongation …

A New Design Strategy For Sizes Of Polymer Gel Treatments Derived From A Comprehensive Assessment Of Their Case Histories, Munqith Aldhaheri, Abdullah Almansour, Na Zhang, Mingzhen Wei, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The incentive to revive brownfield oil production extends the interest to apply polymer gel treatments in injection wells. Virtually, volumes of previous remediations implemented in similar reservoir types are used to size new jobs. Such an analogy-based design procedure imposes a need to evaluate the most frequent designs for each reservoir type based on a comprehensive field survey. This survey provides a new treatment sizing strategy for polyacrylamide-polymer bulk gels by reviewing their field applications in 653 injection wells. The new strategy proposes using the average and most frequent gel volumes per reservoir type as an initial estimate of the …

A New Design Strategy For Sizes Of Polymer Gel Treatments Derived From A Comprehensive Assessment Of Their Case Histories, Munqith Aldhaheri, Abdullah Almansour, Na Zhang, Mingzhen Wei, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The incentive to revive brownfield oil production extends the interest to apply polymer gel treatments in injection wells. Virtually, volumes of previous remediations implemented in similar reservoir types are used to size new jobs. Such an analogy-Based design procedure imposes a need to evaluate the most frequent designs for each reservoir type based on a comprehensive field survey. This survey provides a new treatment sizing strategy for polyacrylamide-polymer bulk gels by reviewing their field applications in 653 injection wells. the new strategy proposes using the average and most frequent gel volumes per reservoir type as an initial estimate of the …

Design And Characterization Of A Broadband Rf Switch Utilizing Surface Mount Devices, Daniel Bracamontes

Master's Theses

High frequency solid-state switches are critical elements in communication systems, radio frequency (RF) systems and instrumentation. Key parameters to an RF switch include insertion loss while on and off-state isolation. Power handling and linearity are important to consider for a cost-effective construction. This becomes a design challenge into K-band frequencies as components required need to be small, dielectric losses and transmission lines need to be physically matched for proper isolative and through states. This thesis presents a novel single pole eight throw (SP8T) hybrid design composed of commercially available surface mount technology solutions to achieve high isolation and low insertion …

Underwater Acoustic Telemetry For Marine Permaculture, Jonathan Lin, Harrison Shaw, Ben Shiverdaker, Mark Ellersick

Electrical and Computer Engineering Senior Theses

As a result of global warming and rising ocean temperatures and sea levels, seaweed forests are degrading. Seaweed biomass loss presents significant risks to coastal communities that rely on seaweed forests for food, livestock feed, fertilizer, and more. Marine Permaculture is the Climate Foundation’s regenerative farming initiative to grow seaweed outside of its intended habitat. The “Deep Cycling” technique involves positioning a submersible bed near the water surface during the day and lowering it at night, allowing for seaweed to receive sunlight and cold water. Prior work on this project included establishing a temperature control loop, though did not include …

Storage Solutions Within Memory Capacitor Technologies, Sam Anderson

Electrical and Computer Engineering Senior Theses

The need for efficient memory solutions is ever-increasing in the contemporary computing technology landscape, particularly in neuromorphic computing. This thesis introduces a novel approach to memory storage using memcapacitors, which store information via capacitance rather than voltage, offering a promising alternative to traditional memory systems. Through the development and simulation of memcapacitor technologies, this work explores their potential to enhance machine learning capabilities and reduce power consumption. Our research demonstrates that memcapacitors can be effectively implemented at the nano-scale, albeit with substantial manufacturing investment. We employed various optimization strategies, including circuit adjustments and behavioral modeling simulations, to maximize the efficiency …

Modeling And Performance Investigation Of Novel Inorganic Cs4cusb2cl12 Nanocrystal Perovskite Solar Cell Using Scaps-1d, Hironmoy Karmaker, Ayesha Siddique, Barun K. Das, Md N. Islam

Research outputs 2022 to 2026

For the next generation of photovoltaic devices, perovskite solar cells (PSCs) appear as a good choice because they are simple and convert energy to electricity very efficiently. Recent years have seen a great deal of interest in organic-inorganic lead halide perovskites due to their exceptional optoelectronic properties. Nonetheless, additional commercialization of the Pb element is still restricted by its inevitable toxicity. To address the instability and toxicity of the lead hybrid perovskite, it is imperative to produce entirely inorganic lead-free perovskite nanocrystals. Cs4CuSb2Cl12 offers promising qualities and strong stability against light, heat, and humidity to overcome these drawbacks. It possesses …

Advances In Additively Manufactured Titanium Alloys By Powder Bed Fusion And Directed Energy Deposition: Microstructure, Defects, And Mechanical Behavior, Hongyi Y. Ma, J. C. Wang, Peng Qin, Y. J. Liu, L. Y. Chen, L. Q. Wang, Laichang Zhang

Research outputs 2022 to 2026

Ti and its alloys have been broadly adopted across various industries owing to their outstanding properties, such as high strength-to-weight ratio, excellent fatigue performance, exceptional corrosion resistance and so on. Additive manufacturing (AM) is a complement to, rather than a replacement for, traditional manufacturing processes. It enhances flexibility in fabricating complex components and resolves machining challenges, resulting in reduced lead times for custom designs. However, owing to distinctions among various AM technologies, Ti alloys fabricated by different AM methods usually present differences in microstructure and defects, which can significantly influence the mechanical performance of built parts. Therefore, having an in-depth …

Understanding The Impact Of Microplastic Contamination On Soil Quality And Eco-Toxicological Risks In Horticulture: A Comprehensive Review, N. P. Gayathri, Geena Prasad, Vaishna Prabhakaran, Vishnu Priya

Research outputs 2022 to 2026

The horticulture sector, essential for global food production, confronts significant challenges with prevalent pollutants, mainly microplastics. The presence of microplastics in the food chain has induced physiological stress and a multifactorial food safety concern. The complexity of the problem, arising from intricate interactions among microplastics, organisms, and ecosystems, poses a substantial challenge to food safety, necessitating an immediate strategic perspective due to the associated risks to human health and eco-toxicology. Significant knowledge gaps persist regarding their impact on terrestrial ecosystems, especially in horticulture. This study addresses the urgent need to comprehend the implications of microplastics on soil health, eco-toxicological risks, …

Hydrogen From Food Waste: Energy Potential, Economic Feasibility, And Environmental Impact For Sustainable Valorization, Md Sanowar Hossain, Fairuz Wasima, Md Sharul I. K. Shawon, Barun K. Das, Pronob Das, Sanjay Paul

Research outputs 2022 to 2026

Globally, inefficient management of municipal solid waste, composed primarily of food waste poses concern for human and environmental well-being. Food waste can be converted into hydrogen gas, which can be utilized to generate power without emitting any harmful pollutants. This solution would also help with the issue of disposing of food waste. The conversion of food waste into hydrogen is a practical energy source with potential financial benefits. This study explores the transformative potential of converting food waste into renewable energy through hydrogen production, focusing on Bangladesh from 2023 to 2042. Notably, the study forecasts a surge in food waste …

Recent Innovations In Laser Additive Manufacturing Of Titanium Alloys, Jinlong Su, Fulin Jiang, Jie Teng, Lequn Chen, Ming Yan, Guillermo Requena, Lai-Chang Zhang, Y. Morris Wang, Ilya V. Okulov, Hongmei Zhu, Chaolin Tan

Research outputs 2022 to 2026

Titanium (Ti) alloys are widely used in high-tech fields like aerospace and biomedical engineering. Laser additive manufacturing (LAM), as an innovative technology, is the key driver for the development of Ti alloys. Despite the significant advancements in LAM of Ti alloys, there remain challenges that need further research and development efforts. To recap the potential of LAM high-performance Ti alloy, this article systematically reviews LAM Ti alloys with up-to-date information on process, materials, and properties. Several feasible solutions to advance LAM Ti alloys are reviewed, including intelligent process parameters optimization, LAM process innovation with auxiliary fields and novel Ti alloys …

The Effect Of Atomic Oxygen On Additively Manufactured Materials, Ryan Grogan

Master's Theses

Additive manufacturing (AM) is a rapidly developing manufacturing method utilized in fields such as the aerospace industry. In-space AM is a technology of interest for the future of spaceflight, including on-orbit manufacturing. However, AM materials are subject to defects that may impact their performance in space-based applications. How these defects change the material’s reaction to the space environment, specifically atomic oxygen (AO), has only recently been explored. AO is a highly corrosive, dominant constituent in low Earth orbit that causes continuous erosion of spacecraft surfaces. The effect of AO on various AM materials is investigated in this thesis. Stainless steel, …

Aerobic Exercise Improves Depressive Symptoms In The Unilateral 6-Ohda-Lesioned Rat Model Of Parkinson's Disease, Hannah Loughlin, Jacob Jackson, Chloe Looman, Alayna Starll, Jeremy Goldman, Zhiying Shan, Chunxiu Yu

Michigan Tech Publications

Aerobic exercise has been shown to have established benefits on motor function in Parkinson's disease (PD). However, the impact of exercise on depressive symptoms in PD remains unclear. This study aimed to investigate the effects of regular exercise, specifically using a forced running wheel, on both motor performance and the prevalence of depression in a unilateral 6-OHDA-lesioned rat model of PD. The behavioral outcomes of exercise were assessed through the rotarod test (RT), forelimb adjusting step test (FAST), sucrose consumption test (SCT), and novelty sucrose splash test (NSST). Our data revealed evident depressive symptoms in the PD animals, characterized by …

Accommodating Innovative Uses Of Public Right Of Way, Travis Thompson, David Moses, Candice Wallace, Pam Clay-Young, Arlen Sandlin

Kentucky Transportation Center Research Report

State departments of transportation (DOTs) are embracing the use of clean energy and connectivity (CEC) applications along publicly owned right of way (ROW). Applications such as wind and solar power installations, broadband lines, small cell wireless equipment, electric vehicle charging stations, and technologies related to connected and automated vehicles (CAVs) hold considerable promise for conferring environmental benefits, energy savings, and generating much-needed revenue for DOTs. This report explores innovative uses of state-owned ROW that the Kentucky Transportation Cabinet (KYTC) could implement. Although Kentucky may not be currently situated for all clean energy applications, opportunities in solar do currently exist and …