Engineering Commons^™

Flake Aligner Including Reciprocating Baffles, Tauno B. Kilpela

Michigan Tech Patents

Apparatus for forming a loosely felted mat of elongated wood flakes, the wood flakes being aligned in parallel relation and parallel to the longitudinal direction of the mat. The apparatus includes a former for depositing wood flakes on a support surface in a uniformly dispersed, loosely felted relation, and a plurality of vertically oriented baffles positioned below the former and in mutually parallel alignment. The baffles are reciprocated in the direction of the mat to cause flakes lying across the baffles to fall between the baffles and to be aligned with the longitudinal direction of the mat.

Test 1557: Kubota M8950dt And M8950 Diesel 24-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1555: Kubota L3750 Fwd And 2wd Diesel 8-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1556: Kubota L4150 Fwd And 2wd Diesel 8-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Fan-Shaped Loader For Making A Loosely Felted Mat Of Aligned Wood Flakes, Gordan P. Krueger, Anders E. Lundi, Roy D. Adams

Michigan Tech Patents

Apparatus for forming an elongated continuous mat of elongated wood flakes mixed with a binder and adapted to be compressed to form a densified composite wood product for continuously depositing wood flakes on that supporting surface and for aligning the elongated wood flakes being deposited in mutually parallel relation and in alignment with the direction of movement of the supporting surface. A hopper for containing wood flakes deposits wood flakes into the upper end of a fan-shaped flake loader comprised of a plurality of channels positioned in side-by-side relation and sloping downwardly from the hopper to a supporting surface. The …

Flake Feeder Aligner Including Reciprocating Baffles, Tauno B. Kilpela

Michigan Tech Patents

Apparatus is described for forming a loosely felted mat of elongated wood flakes, the wood flakes being aligned in parallel relation and parallel to the longitudinal direction of the mat. The apparatus includes a former for depositing wood flakes on a support surface in a uniformly dispersed, loosely felted relation, and a plurality of vertically oriented baffles positioned below the former and in mutually parallel alignment. The baffles include a first set and a second set with respective ones of the second set of baffles being positioned between respective ones of the baffles of the first set. The baffles of …

Test 1553: Massey- Ferguson 1030 Diesel 12-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Noninvasive Detection Of Arterial Occlusive Disease: A Theoretical And Model Study, Lauren I. Stratouly, William W. Durgin, Frederick A. Anderson Jr., H. Brownell Wheeler

Office of the Provost Scholarship

To develop a noninvasive method of detecting arterial occlusive disease, pulse waveforms were recorded at two locations on the lower extremities of young normal volunteers and patients with arteriographically confirmed arterial occlusive disease. Pulses were monitored using impedance plethysmography at the knee· and the iliac regions. The frequency spectra of the abnormal iliac waveforms contained 4-5 harmonics as compared to the 2-3 harmonics present in normals'. It was hypothesized that the occurrence of high frequencies resulted from pulse wave interactions with diseased portions of the vessel. This paper will present the results of a theoretical and experimental model developed to …

Test 1554: Massey-Ferguson 1040 Diesel 12-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1552: Massey-Ferguson 1020 Diesel 12-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

A Continuous Distillation Operation At The University Of Tennessee At Chattanooga, David H. Cummins

Honors Theses

This paper describes the work done on the design, construction, monitoring, and control of a distillation column. This work was done as a Departmental Honors Project in the School of Engineering at The University of Tennessee at Chattanooga. The column has been completed and the various tests performed with the column have produced satisfactory results. The column parameters are monitored and controlled by automatic controllers with manually adjusted set points. In addition to this, micro-computer based control for the column has been designed, however implementation of this control has not yet been achieved.

Comparison And Evaluation Of Web Crippling Prediction Formulas, Monique Bakker, Teoman Peköz

CCFSS Library (1939 - present)

Since the use of end and load stiffeners is frequently impractical in thin-walled cold-formed steel construction, the webs of beams a.nd deck oay cripple due to the high local intensity of the load or reaction. In this report three different web crippling prediction formulations are compared with experimental results from five different sources. It is found that these web crippling formulas show considera.ble differences and do not give satisfactory results consistently.

Solid Waste Resource Recovery Alternatives, U.S. Facility, Subic Bay, Philippines, Samuel A. Vigil, R. M. Roberts, Donald E. Brunner

Civil and Environmental Engineering

The U.S. Navy Public Works Center, Subic Bay, Republic of the Philippines (PWC Subic Bay) is responsible for the collection and disposal of almost 300,000 yd³ of solid waste annually. A portion of this solid waste is manually sorted and recycled, resulting in gross revenues of over $200,000 in FY82. The present manual sorting and recycling system is considered by PWC Subic Bay to be inadequate in terms of sanitation, safety, and recyclable materials recovery. Therefore , PWC Subic Bay requested that the Naval Civil Engineering Laboratory (NCEL) study the system and recommend improvements.

Fly Ash Stabilized Bases In Kentucky, Gary W. Sharpe, Larry Epley

Kentucky Transportation Center Research Report

With the escalating costs of materials and construction for highways and streets, many agencies charged with the responsibility of designing and constructing highways are utilizing byproduct stabilized (pozzolanic) materials. Low-strength (pozzolanic) materials have been used fairly extensively in some areas of the United States as well as abroad. In general, pozzolanic materials have been used to stabilize an aggregate base or subbase by addition of fly ash and a source of lime to develop a cementitious reaction. Additionally, portland cement or cement kiln dust have been used to stabilize aggregate subbase and (or) base materials.

Until recently, the use of …

Acuta Enews March 1985, Vol. 14, No. 3

ACUTA Newsletters

In This Issue

Party Line

Telecomm: What Hath Been Wrought?

High Hopes and Tough Realities for Centrex

Truck Design And Usage Related To Highway Pavement Performance, Robert C. Deen, Herbert F. Southgate, Gary W. Sharpe, David L. Allen, Jerry G. Pigman

Kentucky Transportation Center Research Report

The function of a pavement is to serve traffic safely, comfortably, and efficiently at reasonable costs. Automobile traffic typically accounts for the major volume of traffic using high-type facilities. However, heavy truck traffic accounts for the major portion of accumulated fatigue and therefore requires greater structural designs. Truck design and usage has tended toward larger vehicles and greater payloads. The impact of elements of truck design and usage (such as suspension systems, floating axles, axle configurations, uniformity of loading, payloads, etc.) on fatigue "damage" are illustrated. The effects of increasing vehicle loadings and increased tire pressures are related to potential …

Development Of Accident Reduction Factors, Tom Creasey, Kenneth R. Agent

Kentucky Transportation Center Research Report

In order to use the cost-optimization procedure of dynamic programming to rank safety improvements, improvement costs and benefits must be input. The benefits are in terms of accident reductions resulting from specific safety improvements. In this study a comprehensive list of accident reduction factors were developed to use in the cost-optimization program. The development of the list of reduction factors was based mainly on a review of literature and survey of states, with limited input from a before-and-after accident analysis.

Unstable Subgrade, I 65, Hardin County (I 65 - 5 (17) 92; Fsp 047-0065-091-0396), Tommy C. Hopkins, Gary W. Sharpe

Kentucky Transportation Center Research Report

During construction of the southbound lanes of I 65, Stations 120+00 to 218+00, in Hardin County, Kentucky, near Elizabethtown, large deformations were observed when dense-graded aggregate (DGA) base courses were loaded with construction traffic. Rutting and cracking of the DGA also was noticeable. A study was performed to determine the causes of the unstable subgrade and base, recommend remedial actions, and evaluate the effectiveness of the remedial measures. The stability, or bearing capacity, of the unstable pavement was determined for different construction stages and combinations of pavement layer thicknesses using a relatively new stability model HOPK-I. The stability of the …

High-Temperature Redox Behavior Of Doped Srtio3 And Lacro3, Harlan U. Anderson, M. M. Nasrallah, B. K. Flandermeyer, A. K. Agarwal

Materials Science and Engineering Faculty Research & Creative Works

The stability of high-temperature fuel cell electrodes to their ambient environment is important for the long-term reliability of fuel cells. In this report the behavior of oxide electrode materials as a function of oxygen activity and temperature is considered. Models for the oxidation-reduction behavior of both p- and n-type oxides are presented. These models take into account the absorption and evolution of oxygen which take place as oxygen activity is varied. The resulting instability in electrical conductivity is explained as a consequence of changes in carrier concentration due to variability in ionic defect concentration. The proposed models are applied to …

Potential Of Stewardly Technology: Norms For The Industrial Enterprise, Nolan Van Gaalen

Pro Rege

In the last sentence of the last full paragraph on page 24, an error appears which, in effect, reverses the intended meaning of that sentence. The second occurrence of the words "no longer" should be deleted so that the sentence reads as follows:

"In fact, Goudzwaard says, this process is so far along that some workers no longer find the dehumanizing work situation as miserable, and regard remaining responsibilities as undesirable burdens."

Explicit Equations For The Polarizing Angles Of A High-Reflectance Substrate Coated By A Transparent Thin Film, R. M.A. Azzam

Electrical Engineering Faculty Publications

Simple explicit equations are derived that determine the angles of incidence at which the parallel and perpendicular polarization components of light are extinguished on reflection from a transparent film coating a high-reflectance (metallic) substrate. The polarizing angles obtained from our approximate expressions are in excellent agreement with those determined by iterative numerical solution of the exact nonlinear equations that govern such angles. For the approximation to be valid, the intensity reflectance of the film-substrate interface, evaluated at the critical angle of the film-ambient interface, must exceed 0.5.

Irish H & V News

Building Services Engineering

No abstract provided.

The Applicability Of Microcomputers To Local Water Management, Roderick Lee Allen

Dissertations and Theses

Historically, hydrologic models have been available only on mainframe computers and have therefore not been used by local water managers to support daily decisions. The development of the microcomputer presents an opportunity for that to change.

Mathematical models of soil moisture and river routing are selected, developed and tested for use on a microcomputer as an aid to local water management. The models are then integrated with an appropriate data base in a computer program written for a microcomputer. The result is a Decision Support System for local water managers.

In order to evaluate the feasibility of using the Decision …

Antireflecting And Polarizing Transparent Bilayer Coatings On Absorbing Substrates At Oblique Incidence, R. M.A. Azzam, Karim Javily

Electrical Engineering Faculty Publications

The condition of zero reflection of p- and s-polarized light by a transparent bilayer on an absorbing substrate is derived in the form |g_ν(ø,N_i)| ≤ 1, where g_ν is a function of the angle of incidence ø, the refractive indices N_i(i = 0,1,2,3) of the system, and the polarization state ν (= p or s). As an application, the air-Si₃N₄-SiO₂-Si system is considered at two laser wavelengths λ = 6328 and 3250 Å. The thicknesses of the two films of the bilayer and the …

Single-Layer Antireflection Coatings On Absorbing Substrates For The Parallel And Perpendicular Polarizations At Oblique Incidence, R. M.A. Azzam

Electrical Engineering Faculty Publications

Explicit equations are derived that determine the refractive index of a single layer that suppresses the reflection of p- or s-polarized light from the planar interface between a transparent and an absorbing medium at any given angle of incidence. The required layer thickness and the system reflectance for the orthogonal unextinguished polarization also follow explicitly. This generalizes earlier work that was limited to normal incidence or to oblique incidence at dielectric—dielectric interfaces. Specific examples are given of p- and s-antireflection layers on Si and Al substrates at λ = 6328 Å at various angles of incidence.

Industrial Earthquake Preparedness In Shizuoka And The Role Of The Prefectural Government, Guna S. Selvaduray

Faculty Publications

The Shizuoka Prefectural Office in Japan plays an important role in promoting earthquake emergency preparedness among its industries. In addition to implementing regulatory requirements and enacting new regulations as necessary, the Prefectural Office also provides significant guidance to industry. This includes making publications available and periodic surveys of the status of industrial emergency preparedness. A pharmaceutical company in the prefecture has developed an impressive earthquake preparedness program and hazard reduction techniques. This program addresses both primary and secondary effects of earthquakes.

Numerical Simulation Of Streamer Propagation In Nitrogen At Atmospheric Pressure, S. K. Dhali, P. F. Williams

P. F. (Paul Frazer) Williams Publications

Results of the application of flux-corrected transport techniques to a two-dimensional numerical simulation of streamer propagation are presented. Characteristics such as diameter, velocity, shape, and density gradient of the head, and ionization in the body of the propagating streamer are determined. These results provide new insight into streamer propagation.

Irish H & V News

Building Services Engineering

No abstract provided.

Extinction Of The P And S Polarizations Of A Wave On Reflection At The Same Angle From A Transparent Film On An Absorbing Substrate: Applications To Parallel-Mirror Crossed Polarizers And A Novel Integrated Polarimeter, R. M.A. Azzam

Electrical Engineering Faculty Publications

The p- and s-polarized components of light can be suppressed on reflection at the same angle of incidence from an absorbing substrate coated by a transparent thin film if the wave is refracted in the film at 45° and the constraint Re[(ε₂ - α)/(l -α)]^1/2 = α + | ε₂ - α| is satisfied, where 2α and ε₂ are the ratios of dielectric constants of the film and substrate, respectively, to that of the ambient. For high-reflectance metal substrates (|ε₂| » 1), α≈ 1, the ratio of film to ambient refractive index …

Strain Gage Installation On The I-75 Bridge At Covington, Kentucky And Subsequent Data Analysis, Theodore Hopwood Ii, Jesse G. Mayes

Kentucky Transportation Center Research Report

In June 1984, the Kentucky Transportation Research Program (KTRP) was requested by the Kentucky Transportation Cabinet to install strain gages on structural members of the I-75 (Brent Spence) Bridge at Covington. This work was to be part of a renovation/modification project on that structure.