Engineering Commons^™

Sustained Groundwater Yield And Conjunctive Use Via Target Levels In A Reasonable Use State, Ann W. Peralta, Richard C. Peralta

Civil and Environmental Engineering Faculty Publications

No abstract provided.

Optimal Piezometric Surface Management For Groundwater Contaminant Control, Richard C. Peralta, R. L. Ward

Civil and Environmental Engineering Faculty Publications

A methodology is described for efficiently evaluating possible injection/extraction pumping schemes to most economically contain a groundwater contaminant plume. A multi-objective model is analyzed with a micro-computer. Simulation and optimization is performed by employing the response matrix method.

Potential Arkansas And White Rivers Water Available For Diversion To The Grand Prairie, W. Douglass Dixon, Richard C. Peralta

Civil and Environmental Engineering Faculty Publications

At the present time. the rate of groundwater use in the Grand Prairie region of Arkansas exceeds natural replenishment of the underlying aquifer. Most of the groundwater is used for agricultural production. [f current agricultural water needs of the region are to be satisfied under sustained yield conditions. supplemental surface water will be required. The objective of this study is to assess the viability of the Arkansas and White Rivers as sources of supplemental water for meeting water needs in excess of those which can be met with groundwater.

Assuring Sustained Groundwater Availability And Achieving Conjunctive Water Management By Target Approaches, Richard C. Peralta, Ann W. Peralta

Civil and Environmental Engineering Faculty Publications

No abstract provided.

Review And Evaluation Of Current Design And Management Practices For Land Treatment Units Receiving Petroleum Wastes, J. P. Martin, Ronald C. Sims, J. Matthews

Biological Engineering Faculty Publications

Land treatment is categorized in the Resource Conservation and Recovery Act of 1976 (RCRA) as one of the land disposal options for managing hazardous wastes. Land treatment relies on detoxification, degradation, and immobilization of hazardous waste constituents within the defined treatment zone to ensure protection of surface water, groundwater, and air. Under the authority of Subtitle C of RCRA, the U.S. Environmental Protection Agency has promulgated regulations governing the treatment of hazardous wastes in land treatment units (40 CRF, Part 264, Subpart M, July, 1982).

This paper describes the land treatment practices used by petroleum waste land treatment facilities in …

Maintaining Target Groundwater Levels Using Goal‑Programming: Linear And Quadratic Methods, Amin Yazdanian, Richard C. Peralta

Civil and Environmental Engineering Faculty Publications

Sustained-yield groundwater management strategies can be designed to closely maintain preassigned 'target' levels. Quadratic and linear goal-programming objective functions are used in two distinct models which minimize the sum of differences between 'target' and regionally optimized sets of groundwater levels. Constraints and bounds imposed on extractions, recharge and heads in each model assure that developed strategies are physically feasible and sustainable. The linear model is computationally more time-efficient, but numerical difficulties due to equality constraints are encountered when it is applied to large groundwater systems_ The quadratic model requires less computer storage and is applied to the Grand Prairie of …

Optimal Modification Of Regional Potentiometric Surface Design For Groundwater Contaminant Containment, Bithin Datta, Richard C. Peralta

Civil and Environmental Engineering Faculty Publications

A procedure for optimal modification of a regional potentiometric surface designed solely on the basis of quantitative considerations, is presented. The modification in the potentiometric surface is necessary to incorporate groundwater quality criteria in a critical subsystem of the entire region. The resulting optimal regional potentiometric surface ensures: sustained groundwater yields from the aquifer, compliance with water quality constraints at critical cells of the sub· system (which are identified by a solute transport simulation model), and the most economic conjunctive management of surface and groundwater.

Linear Process Calculations As Convergence Accelerators In Flowsheet‐Sequenced Programs, S. M. Milani, Marshall E. Findley

Chemical and Biochemical Engineering Faculty Research & Creative Works

Linear process calculations were developed for use in conjunction with flow‐sheet‐sequenced calculations, as methods of convergence acceleration. Two such methods were compared with the successive substitution and Wegstein methods on relatively simple processes. "Linear Process Simulation," which requires user‐derived equations, produced the best results. Copyright © 1986 American Institute of Chemical Engineers

Structural Design Of Coal-Fueled Power Plant Ductwork, Stanley Pearce Rader

Doctoral Dissertations

"An absence of a comprehensive procedure for design of coal-fueled power plant ductwork currently exists in the publicly available literature. This dissertation presents such a procedure.

An overview of the ductwork design environment, including major components of the air and flue gas flow paths, design loads and temperatures, corrosion considerations, and physical configurations, is given. Design criteria for materials, corrosion inhibition, minimum plate thicknesses, temperature effects, allowable stresses and deflections, and vibrations are proposed. A detailed design procedure based on the allowable stress design philosophy is presented, and computer programs implementing the design procedure are provided. An alternate design procedure …

A New Basin Characteristic For Use In Estimating Impervious Area And Flood Discharges In Urban Missouri Basins, Rodney E. Southard

Masters Theses

"A previous regression analysis of flood peaks on urban basins in St. Louis County, Missouri, indicated that the percentage of impervious area and drainage area were the only basin characteristics of statistical significance in estimating the 2-, 5-, 10-, 25-, 50-, and 100-year peak-flow discharges at ungaged urban basins. In this statewide regression analysis of urban basins, a new basin characteristic called the percentage of developed area was computed and used in a simple regression analysis. The regression analysis included percentage of developed area as the independent variable and impervious area as the dependent variable, resulting in a simplified procedure …

Fast Discharges In Thin Liquid Layers, Charles J. Frei, Aidan O'Dwyer

Conference papers

Several mechanisms can be at work when electrical discharges occur across a thin layer of an insulating liquid. The evidence is derived from the time-lag distributions of series of consecutive discharges when the measurements are performed with a sequence of constant voltage pulses.

Alternate Presentation Of Fourier Transform Development From Fourier Series., Gordon E. Carlson

Electrical and Computer Engineering Faculty Research & Creative Works

An alternate presentation of the development of the Fourier transform from the complex exponential Fourier series is presented. It uses spectral concepts to aid the mathematical development and a redefined spectral form for the spectral information obtained with the Fourier series. It has been used a number of times in the classroom and has been found to aid the students' understanding of the Fourier transform and the spectra of an aperiodic signal.

An Interactive Power System Analyzer With Graphics For Educational Use, Chin Hwanglo, Max Darwin Anderson, Earl F. Richards

Electrical and Computer Engineering Faculty Research & Creative Works

The paper presents a student-oriented power system analyzer with an interactive graphics display. Its capabilities include studies of (1) load flow, (2) load and generation, (3) voltage level control, (4) economic dispatch, and (5) contingency and planning analysis. Power network configurations of up to 30 buses can be presented clearly on one screen. The interactive nature of this program makes such studies effective and easy to use. With the support of a computer with graphics software and many graphics terminals, this program can be a useful teaching tool for power system studies. Copyright © 1986 by The Institute of Electrical …

Elasto-Composition Waves In Inhomogeneous Solids, R. C. Batra, Manfred Wuttig

Mechanical and Aerospace Engineering Faculty Research & Creative Works

No abstract provided.

Irish H & V News

Building Services Engineering

No abstract provided.

Effects Of Cd(Ii) And Cu(Ii) On A Biofilm System, Shoou Yuh Chang, Ju-Chang Huang, Yow Chyun Liu

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

There is little information available in the literature to describe the effect of heavy metals on a fixed-film biological waste treatment system. The primary objective of this study is to evaluate the toxic effect of Cd(II) and Cu(II) on a fixed-film biological reactor (rotating biological contractor) in treating a sugar waste. Different levels of cadmium (5 and 20 mg/L) and copper (1, 5, 10, 25, and 50 mg/L) were dosed to a three-stage RBC unit treating an influent of 300 mg/L sugar solution. Experimental results indicated that the treatment efficiency was not adversely affected by the presence of copper at …

On The Mean Time Between Failures For Repairable Systems, Max Engelhardt, Lee J. Bain

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Much of the recent work on modeling repairable systems involves Poisson processes with nonconstant intensity functions, viz, nonhomogeneous Poisson processes. Since times between failures are not identically distributed when the process is nonhomogeneous, it is not clear what concept should take the place of the mean time between failures in assessing the reliability of a repairable system. A number of alternate concepts can be found in the literature. We investigate the relationship between two of the most frequently considered alternatives: the reciprocal of the intensity function, and the mean waiting time from t until the next failure. Theorem 1 states …

Preparation Of Perovskite Pb(Mg1/3nb2/3)03 Using Pb3nb208 And Mgo, Jyoti P. Guha, Harlan U. Anderson

Materials Science and Engineering Faculty Research & Creative Works

The synthesis of perovskite Pb(Mg1/3Nb2/3)O3 from an equimolar mixture of Pb3Nb208 and MgO was studied by solid‐state reaction techniques. An addition of 1 wt% excess MgO to the stoichiometric composition enhances the formation of the cubic perovskite phase. The absence of free PbO in the initial starting materials minimizes the volatilization loss during firing, thereby reducing the possibility of any compositional change and resulting in a substantial improvement of the perovskite phase purity over the conventional mixed‐oxide processing. Copyright © 1986, Wiley Blackwell. All rights reserved

Investigation Of Vscous/Inviscid Interaction In Transonic Flow Over Airfoils With Suction, Chadra S. Vemuru

Mechanical & Aerospace Engineering Theses & Dissertations

The viscous/inviscid interaction over transonic airfoils with and without suction is studied. The streamline angle at the edge of the boundary layer is used to couple the viscous and inviscid flows. The potential flow equations are solved for the inviscid flow field. In the shock region the Euler equations are solved using the method of integral relations. For this the potential flow solution is used as the initial and boundary conditions. An integral method is used to solve the laminar boundary-layer equations. Since both methods are integral methods, a continuous interaction is allowed between the outer inviscid flow region and …

Utilization Of A Carbon-Dioxide Laser To Form An Amorphous Metallic Layer On Gray Cast Iron With Various Amount Of Boron, Majid Torkzadeh Tabrizi

Dissertations and Theses @ UNI

The study of the amorphous metals in important because of their technological usefulness. One class of these materials, iron-based metallic glass, has shown great promise in application because of the superior chemical, mechanical, electrical, and magnetic properties of these materials.

This study was conducted to examine the capability of a medium-powered carbon-dioxide laser to form an amorphous metallic layer on the surface of a ferritic gray cast iron in order to improve the wear and corrosion resistance of engineered components. Boron was used as an alloying element for the retardation of nucleation and for the formation of the amorphous metallic …

Relationships Between Casting Features And Cavity Fill Time, Gate Velocity, And Gate Area For Aluminum Die Castings, Hsin-Yen Chen

Dissertations and Theses @ UNI

The purpose of this study was to investigate the relationships between casting features (including weight, average thickness, surface area, and outside diameter) and casting process variables (including cavity fill time, gate velocity, and gate area) for aluminum die castings. Historical data of good quality aluminum round castings of the Kiowa Corporation in Marshalltown, Iowa, were used in the correlation analysis. The correlation analysis consisted of determining the following:

(1) the correlation of one casting process variable and one casting feature.

(2) the multiple correlation of one casting process variable and a combination of several casting features.

The results of statistical …

Career Counseling Practices In Abet-Accredited Engineering Cooperative Education Programs, Gary Richard Martin

University of the Pacific Theses and Dissertations

Purpose. The purpose of this study was to describe and evaluate the career counseling practices in all schools of engineering in the United States with ABET-accredited engineering Cooperative Education programs. Procedure. A thirty-two item questionnaire was developed and sent out to all ABET-accredited Cooperative Education offices. All the engineering coordinators in each office filled out the questionnaire. Eighty-six percent of the schools responded to the surveys. Findings. (1) Most engineering Co-op coordinators have educational backgrounds in engineering and have taken at least one class in career counseling. (2) Co-op coordinators tend to have caseloads and other responsibilities which restrict the …

Propagation Of Optical Waves In Tapered Fibers And Metallic Wave Guides, Bahram Zandi

Dissertations and Theses

The equations tor the propagation of Electromagnetic and Optical waves in tapered fibers and metallic waveguides are derived. Solutions are derived for the displacement of the beam from the waveguide axis as a function of distance along the axis, and also tor the beam width as a function of distance. These equations are solved numerically for a variety of tapered guides. Experiments are conducted which verify the theoretical results.

Fuel Loading For A Low-Leakage Core In A Pressurized Water Reactor, Omar Ivan Aguilar

Masters Theses

"A study of low-leakage core fuel loading as a means to reduce fast neutron flux incident upon the pressure vessel is presented. The specific case under study is Cycle 5 of Arkansas Nuclear One - Unit Two (ANO-2), a Combustion Engineering Pressurized Water Reactor. Neutron transport calculations were performed using the DOT two-dimensional transport code. The results from DOT provide the angular distribution of the fast neutron flux at the surface of the pressure vessel.

Seven different fuel loading schemes were studied and compared to the Reference Case. The angular distribution of the fast neutron flux for all cases studied …

Commercial Design Of Four Indirect-Fired Fluidized Bed Gasifer Systems, Eoin Myles Clancy

Masters Theses

"This thesis deals with the design and cost analysis of four scaled up gasification plants. Reactor outputs range from 10 to 40 million Btu/hr (heating value of gas). Scale-up design parameters are based on data obtained from a 20 inch indirectly heated steam fluidized bed gasifier. This produces a medium Btu gas (450 Btu/ft³). The gas may be burnt on site or used as a chemical feedstock.

The plant designs consider reactor sizes, steam plant dimensions, specifications for feedhoppers, cyclones, conveying equipment, internal firetube heat exchangers, and drying plants.

The economic analysis deals with the cost of the …

The Effect Of Oxygen Partial Pressure On Oxygen And Carbon Incorporation In Czochralski Grown Single Crystal Silicon, Paul Shane Carter

Masters Theses

"The study herein detailed was made to determine the effect of varying the oxygen partial pressure of a Czochralski type crystal pulling furnace using conventional hardware and remelt silicon on the level of incorporated oxygen and carbon in the single crystal. The oxygen partial pressure was measured by a zirconia type oxygen sensor and controlled by additions of hydrogen or carbon dioxide to the argon purge gas. The oxygen and carbon incorporation measurements were made by the Fourier Transform Infrared (FTIR) method, using the American Standard for Testing Materials (ASTM) standard calibration.

During the study boules which were zero dislocation …

Site Characterization And Remedial Engineering Options At An Uncontrolled Hazardous Waste Site : Fulbright Landfill, City Of Springfield, Mo., Kathleen Carey Duckett

Masters Theses

"Fulbright Landfill is located approximately 3 miles north of the City of Springfield, Missouri along State Highway 13. Hazardous substances, including acids and cyanides, were disposed of regularly in the landfill for a period of about 7 years, from 1962 to 1969. Because of its disposal history, Fulbright Landfill was placed on the Interim National Priorities List in October of 1981. A full-scale remedial investigation and feasibility study is presently being conducted by SCS Engineers (Reston, VA).

The purpose of this thesis is to assess the nature and extent of the threat to the public or the environment based on …

A Purchase Estimator For Oil And Gas Reserves, Ronald Ernest Robbins

Masters Theses

"A computerized means for analyzing the profitability and purchase potential of producing oil and gas properties was developed. LOTUS 1- 2-3, a computerized spreadsheet package, was utilized in this development. The basic input data required for the implementation of the purchase estimator (BUYOUT) are the forecasts of production, price, and expense. BUYOUT itself is composed of three separate, but interactive, parts: and the system macro. the profitability model, the acquisition table,

A before federal income tax cash-flow model and several economic indicators constitute the profitability model. The profitability model is then fully interactive with an acquisition table which contains six …

An Investigation Of Signs For Median Crossovers, Gillian M. Worsey

Doctoral Dissertations

“This paper describes a study of advance warning signs for median crossovers on divided highways. Candidate crossover signs were identified from a literature review, survey of current State practices and discussions with FHWA personnel. Seven of these signs were selected for further testing in a laboratory study for legibility, understanding and driver preference. Sixty subjects representing a cross-section of drivers took part in the study, thirty at the Turner-Fairbanks Highway Research Center in McLean, Virginia and thirty at the University of Missouri--Rolla in Rolla, Missouri.

Two of the seven signs were word messages and five were symbolic signs. The results …

Oxidation Kinetics Of Polycrystalline Srtio₃ And Lacro₃, Chi-Kung Jerry Yu

Doctoral Dissertations

"The oxidation kinetics of polycrystalline SrTiO₃ and LaCrO₃ were determined by measuring the time and temperature dependence of the weight and conductivity change of reduced samples. A region of fast diffusion followed by a reduced diffusion tail was observed in the TGA measurements. This observation can be interpreted as the initial diffusion along the boundaries and then spreading out into the lattice. The absence of the tail in the conductivity measurements is due to the high electron and hole mobility at the boundaries. The electrical conductivity and TGA results on Nb-doped LaCrO₃ show that at low oxygen …