Engineering Commons^™

Substructuring Analysis For Impact Dynamics Using Ansys Finite Element Package, Chang Ho Cho

Theses

This thesis is intended to serve as an introductory guide to ANSYS finite element package for the analysis of impact dynamics. Substructuring technique has been used to reduce the degrees of freedom.

Finite element method is essentially a numerical technique to calculate elastic deformations. However, by introducing some techniques like gap element, the technique can be easily extended to rigid body dynamic analysis. To solve the equation of motion both for rigid body and elastic deformations, direct integration technique is used in this thesis, i.e., Houbolt method.

ANSYS is a large scale general purpose computer program for finite element analysis. …

Biodegradation Of Multiple Substrates In A Batch Reactor, Nilesh Naik

Theses

The biological degradation of multiple substrates was studied at room temperature in aerated 5-liter batch reactors using mixed liquor from the Passaic Valley Sewerage Commissioners wastewater treatment plant (Newark, New Jersey).

Two substrate mixtures were used (with initial concentration indicated in parenthesis): (1) phenol(100ppm) + nitrobenzene(10ppm) + 2,6-dichiorophenol(10ppm); (2) 2-chlorphenol(20ppm) + nitrobenzene(10ppm) + 2,6-dichlorphenol(10ppm). From concentration versus time data, kinetic rate constants for zero-order, first-order, and Monod models were determined. Most of the data were best fit by either the Monod or zero-order model. For all compounds tested biodegradation was the primary removal mechanism, and in many cases the rate …

Systems Building Theory Application Within The Residential Housing Construction Market, Gary Alexander Newhard

Theses

The primary purpose of this report is to introduce the economical value in utilizing certain "systems building" applications. In this report I focus on integrated system methodologies that encourage residential building economy and submit such systems as a viable alternative to traditional labor intensive housing construction. The consumer market that could be particularly enhanced by these systems ranges from low income to middle income and the by-product would be classified as "affordable" housing.

This report focuses on the New Jersey real estate market and presents certain prefabricated housing systems as an economical means of meeting the large demand for residential …

The Acquisition Of Direct Sequence Spread Spectrum Communication Systems, Anthony Donald Demeri

Theses

This Paper surveys different techniques of acquiring Direct Sequence Spread Spectrum Systems.

It classifies different systems, indicates the strongpoints and weakness of each, along with some applications.

One method, The Single Dwell Serial PN Acquisition System is then focused on in detail. The detail includes analysis of standard version, derivation of the mean time to acquire, the variance, the probability of detection and the probability of a false alarm.

In the last section of the paper the analytical results of the Single Dwell Serial PN Acquisition System shall be confirmed by computer simulation.

Modal Analysis Of A Cantilever Plate, Ohseop Song

Theses

This thesis discusses the vibration of a thin, flat cantilever aluminum plate. Results are based on both an analytical finite element method using the ANSYS program and an experimental analysis using a digital Fast Fourier Transform (FFT) analyzer. The FFT analyzer permits extraction of modal parameters (natural frequency, damping, mode shape) for the plate.

Circular Plate Analysis Using Finite Element Method, Shyh-Rong Chiu

Theses

The ANSYS computer program is the application of finite element methods to large-scale engineering problems. In this work the ANSYS program has been employed to solve the circular plate under uniformly loaded with various boundary conditions as follows: (1) clamped along entire edge, (2) simply supported along entire edge, (3) clamped at several points along the boundary, (4) simply supported at several points along the boundary, and (5) simply supported 36 points with 4 points clamped..

The results obtained from the ANSYS program illustrated that the finite element method has no boundary conditions constraints and presents good approximations to the …

Introductory Guide To Bridgeport Series I Cnc Milling, Drilling And Boring Machine, Apurva Vinodchandra Doshi

Theses

This thesis is intended to serve as an easy introductory guide on how to work with Bridgeport Series I CNC Milling, Drilling and Boring machine. An attempt has been made to make the subject matter simpler to give the reader a good start in programming and operating this machine

The spectrum of technological implementation of CNC machine tools is extremely broad,. Companies utilizing advanced technologies such as computer graphics, DNC and Group Technology are in this field for some time. Even small shops are getting equipped with CNC machine tools. The present CNC systems, which are less costly, more reliable …

Fracture Energy And Tensile Behavior Of Concrete, Wen-Jinn Chiou

Theses

Fracture behavior of concrete has been a subject of investigation for the past two decades. The need of understanding the complete tensile response of concrete is absolutely essential for theoretical modelling as well as design application of plain concrete structures.

In this study, attempts were made to investigate the validity of two important fracture parameters, namely, the fracture energy and the critical crack tip opening displacement. Three types of test specimen, dog- bone shaped tension specimen, notched beam and compact tension specimen, were investigated. These tests were conducted using the closed-loop MTS 810 strain-controlled testing system. For the uniaxial tension …

Reliability Studies On Solid Tantalum Electrolytic Capacitors By Means Of Accelerated Life Tests, Venkata R. Golthi

Theses

The purpose of this thesis is to understand the failure mechanisms in Solid Tantalum Capacitors encapsulated in plastic, and to suggest the precautionary measures that prevent the occurrence of these failures.

The reliability of Solid Tantalum Capacitors encapsulated in plastic is of considerable interest because in some applications where the mechanical accelerations or shocks are considerable the "better" "hermitically" sealed type are not able to sustain themselves. Poor adherence between the dielectric film and the base metal Tantalum under the conditions of sudden mechanical shocks, causes problems.

Our study was carried out in two different directions, theoretical and experimental. The …

Applications And Evaluation Criteria For Robotic Systems, Brijan Shirish Badshah

Theses

The robot industry is one of the fastest growing industries. In almost every area of manufacturing, robots are being considered for one or more tasks, but the success of any commercial industrial undertaking has to be measured in terms of financial performance.

To help practitioners in the manufacturing area, an economic analysis and investment appraisal technique for robotic systems is developed, especially to assist managers in making the crucial decision about utilizing an industrial robot. An interactive microcomputer program is developed which performs the economic analysis for cost justification and helps managers to decide whether the implementation of a robot …

Comparison Of Several Manufacturing Techniques Used To Produce A Sterile Antibiotic Powder, Antonio Joseph Barberio

Theses

There are several manufacturing processes (crystallization, spray drying, freeze drying, and closed crystallization) that are used to produce a sterile antibiotic powder. A pharmaceutical manufacturer is faced with the problem of deciding which process is best suited for their operations. The purpose of this thesis is to propose a comparison technique that might aid in a solution to this problem. In the first step of the comparison technique, a fixed rating is assigned to a number of different categories (i.e. initial cost of equipment, product purity, etc.) for each process. The fixed ratings were established from an industrial survey, and …

The Effects Of Different Administrative Parameters On Learning In A Management Simulation, Stephen Christopher Betts

Theses

This research puts forth a set of conclusions regarding the relationship between how a full scale interactive and competative management simulation is organized and executed and how effective the experience seems to participants. One hundred sixty students who participated in management simulations in five different schools were questionaired about how effective the simulation was in teaching ten different subject areas. Their instructors and other game administators were interviewed to Find out how and why the simulation was organized and executed the way that it was in their school. The simulation used in all five samples was the Tempomatic IV. The …

Utilization Of The Microcomputer To Improve The Productivity Of Small Manufacturing Companies, Hung-Gi Chang

Theses

The ongoing microcomputer development has led to its increasing application in manufacturing to reduce costs and improve productivity. Being more aware of this technology, most of these benefits have accrued to large firms. The intent of this thesis is to show that it is equally advantageous for small manufacturing companies to utilize them and show how they can do so.

The paper discusses the role and characteristics of microcomputers. Available software to do engineering designs, materials requirements planning, process planning, and master production scheduling is described. Using a case study a method that can be followed in selection and implementation …

Reliability Study Of Liquid Crystal Display, Kalpesh Mahendra Desai

Theses

The purpose of this thesis is to study the reliability of liquid crystal display under different temperature conditions. To accomplish this, accelerated life testing was done on the soft glass and the hard glass liquid crystal display units at 77 C and 85 C temperature without any added humidity or voltage.

As the current is a usefu1 indicator for probable wear of liquid crystal display, leakage current was measured at 0 hour, 1000 hours, 2000 hours and 3000 hours when the units have stabilized at room temperature.

The date shows higher spread for the hard glass units. This may indicate …

The Effect Of Toxic Substances On The Index Properties Of Soils, Ronald Dicola

Theses

Contaminated soils were tested to determine if a relationship existed between their index properties and hydraulic conductivity. Atterberg Limit tests and Particle Size Analysis tests were performed on Woodbury, Raritan and Brunswick formation soils. The chemicals examined were Benzene, Phenol and Trichloroethylene (TCE). Tests were performed following the ASTM Standard Test Methods with only slight modification to accommodate the use of contaminated soils. Two different methods of soil contamination were used, one for chemical solutions and the other for pure chemicals.

Particle Size Analysis tests were performed both with and without dispersing agent. Hydrometer tests with dispersing agent resulted in …

Cybernetic Theory Applied In Production Control, Ding-Hsin Fang

Theses

There are many theories for the control of production. Also. there are many successful cases for each of the different theories.

Cybernetic theory is quickly evolving as a design basis for management control systems. Cybernetics is the science of self-regulation and its basic tenents are control, or the ability to direct action toward a predetermined goal, and communication, or the ability to send and receive information.

The objective of this thesis is to identify and discuss this theory applied to the management techniques of production control for a Far Eastern textile firm and to investigate the extent that the firm …

Human Resources Planning In Construction Through Operations Research, Maria Pyla-Christodoulou

Theses

The purpose of this thesis is to examine different methods in the allocation of human resources in construction, using decision making through Operations Research. The methods described are divided into methods using mathematical models, and methods using heuristics. The mathematical models yield the optimum solution, while heuristics result in a satisfactory solution which can be improved by applying the optimization procedures described herein.

The human factor in construction is also examined, and methods of improving motivation among the construction workers are discussed.

Computer-Aided Design Of A Waveguide To A Suspended Stripline Transition For Millimeter-Wave Applications, Hsin-Yen Peng

Theses

Realization of millimeter-wave systems on suspended striplines necessitates transitions from such lines into waveguides for measurements and other purposes. Transition can be obtained through coupling TE10 mode in the waveguide into a TEM mode in the suspended stripline. A continuous transition using tapered complementary unilateral finline and two gradually increasing conducting tapered ridges is studied here. The tapered region is modelled using a number of uniform sections with gradually changing cross sections. The junction separating the tapered section from the suspended stripline is modelled via physically and electrically continuous terminations. Physical continuity approach is more flexible for manufacturing purpose at …

Technology Transfer Between Developed And Developing Countries, Tenny Oghogho Ogbomo

Theses

The problems arising from technology transfer, in general, are not new. The problems of the East-West technology transfer, for example, are based on the risk that such transfers will enhance the military capability, or at least the military potential, of the trading partner. In the case of United States trade with the Soviet Union, it can be said that any accretion in the Soviet military capacity weighs against the United States in an overall world-wide balance of power. The restrictions and/or prohibition of such transfer of technology are problems themselves.

The North-South technology transfer, in other words, the technology transfer …

The Dielectric Slab-Wedge Antenna, B. Keith Christensen

Theses

A theoretical model and numerical investigation of the directive gain of a dielectric slab-wedge radiator is presented. The model is based on a union of the classical dielectric slab equations, local mode theory, and equivalent current distribution treatments of the truncated dielectric slab and wedge geometries.

The far field is developed from the sum of two current distributions. The slab region, up to the transition plane between slab and wedge, is replaced by equivalent electric and magnetic surface current densities. The wedge contribution is developed from a volume polarization current distribution.

Conservation of power is used to approximate the field …

Thermal Energy Storage Using Phase Change Material With Multi - Melting Temperatures, Christakis Christodoulou

Theses

Three different models are developed in this investigation, for the study of thermal energy storage, using a phase change material with multi-melting temperatures. Using Model B as the basis, the developed partial differential equations are numerically solved by a finite difference method. Two computer programs were written based on that solution, one for the charging mode and one for discharging. Finally, using the computer programs, a set of results was obtained for both charging and discharging, utilizing calcium chloride hexahydrate as the phase change material with constant and multi-melting temperatures.

Preparation And Testing Of Novel Blocked Isocyanate Dental Adhesives Based Upon Hydroxyhexylmethacrylate, Gururajan Rao

Theses

In this study dental adhesives synthesised from TDI/HHMA/pentaerythritol, with either of the blocking agents namely eugenol, o-methoxyphenol, p-cresol or o-chlorophenol were tested. Bond strengths in dentin as influenced by spacer molecules were tested. Comparison studies to determine this were performed using the same blocking agents and TDI/HEMA/pentaerythritol. The effects of i. post-extraction time and ii. dentin depth on bond-strengths were tested using two monomers: o-methoxyphenol/ TDI/HEMA/pentaerythritol and p-cresol/TDI/HEMA/pentaerythritol 1. From teeth recently extracted (2h) vs dentin aged from one to six months 2. From dentin cut from three different levels within the tooth.

The prepared dentin-adhesive samples were stored in …

Replacement Of Surface Ducted Rays Near Caustics With Guassian Beams, Carlos Javier Ruiz

Theses

Conventional approach to a solution of a wave propagation problem in an inhomogeneous medium is to utilize either rays or modes to represent the wave field. Asymptotic ray theory (ART) starts to fail in the vicinity of caustics due to rays experiencing many reflections. Even uniform representations do not properly correct this deficiency of rays when caustics start to pile up in the far range. One possible alternative is to replace these rays with modal bundles and remainders [1]. A promising technique using Gaussian Beams has been used to represent the total field due to a point or a line …

Effects Of Physical Exertion And Caffeine Ingestion On Mental Performance, Alireza Shafiei

Theses

Stresses in man-machine systems can be broadly classified as (1) physical and (2) mental. Both types of stresses generate some kind of response in the human body. These responses could be physiological (quantitative) or behavioral (qualitative). While the physical stresses mostly create physiological changes, mental stresses may cause physiological and/or behavioral changes. The purpose of this study is to investigate such influences, and try to determine if stimulants such as coffee have any effect on people's ability to perform tasks involving a combination of physical and mental elements.

An attempt has been made to describe an interrelationship between physical exertion …

The Effects Of Platelet Activating Factor (Paf) On The Arteriolar Average Blood Velocity And Volumetric Flowrate In The Microcirculation Of The Hamster Cheek Pouch, Patricia Ann Shatynski

Theses

The effects of platelet activating factor (PAF) in vessel diameter, average red blood cell (RBC) velocity and volumetric flowrate were studied in twenty-four arterioles located in the cheek pouches of nine male syrian golden hamsters. The observed vessels were between 8-32um in diameter. These vesgs were subdivided further into two groups: 8-17um and the 21-32um group. Fluorescein isothiocyanate (FITC) labeled cells were injected into the hamster to act as velocity tracers. Immediately prior to and for a total of 60 minutes after the topical application of 10^-7M and 10^-9M PAF, selected arterioles were video taped periodically …

Isoparametric Finite Elements For Axisymmetric Solids, Ramanand R. Shetty

Theses

The finite element formulation of axisymmetric plane stress analysis is used to develop a computer program for numerical implementation. The basic relations used to derive the finite element equations for a solid continum are reviewed in the thesis. The programming organization is summarized and program list is given in Appendix.

The program portion for isoparametric elements are borrowed from Numerical Methods in Finite Element Analysis by K. J. Bathe and E. L. Wilson, and various other subroutines are used from Mr. Huang's thesis on Micropolar elasticity analysis. Mr. Huang's computer program is based on the work done by Dr. Nakamura …

Human Factors In The Design Of Computer Application Software, Curtis Springstead

Theses

The use of computers in business has expanded tremendously over the past two decades. This expansion has been possible due to increasing economies within the computer industry, and in spite of the lack of consideration shown for the users of such data processing systems. The popularity of computers has compelled users to expand their list of requirements from a computer system so that it includes ease of use.

This thesis attempts to bring together many widely dispersed studies and principles that can affect the ease of use of interactive computer systems. The material has been organized according to five components …

On Radial And Rotational Spring Constants Of Piping With Square Tubing Attachment, Hson-Chih Sun

Theses

Numerical values and analytical expressions for spring constant in the radial direction, and rotational spring constants in the circumferential and longitudinal directions of piping with square structural tubing attachment are presented.

Following Bijlaard's approach, the double Fourier series solution for the thin shell equation are used to express these spring constants as a function of internal pressure, q, and pipe-structural tubing parameters, such as alpha (piping length/radius), beta (tube size/pipe dia.), gamma (pipe radius/thickness) and thickness of the structural tubing. Numerical results of these spring constants are presented in tabulated form. These Tables include a set of eight standard square …

An Analysis Of Carrier Facilitated Transport In Liquid Surfactant Membranes, Pei-Jen Tsai

Theses

Mathematical models describing the mass transfer through facilitated liquid membranes are proposed and solved analytically. A self-adjoint operator method is applied to solve the coupled differential equations with discontinuity in the boundary conditions. It is assumed that equilibrium of the solute at the interfaces is maintained during the separation process. The effects of film resistance are studied/ and a first order kinetic model is used to simulate the reaction which takes place at the membrane-internal phase interface.

Experimental results indicate that the model with external film resistance consideration is in good agreement with the experimental data. This shows that most …

Ray And Beam Representation Of The Glancing Phenomena, Michael Sotiriou Vogas

Theses

Asymptotic ray theory (ART) is a widely used method dealing with problems of wave propagation in an inhomogeneous medium. The main deficiency of ART is in transition regions where rays near caustics, glancing and critical incidence fail to represent the actual wave field. Ray bundles in such transition regions have been successfully replaced with modal bundles and remainders El] in well defined profiles. However , in practical problems it is difficult to implement modal representations and almost impossible to express remainders. Recently emerging Gaussian beam method (GBM) has shown promising results in representing the total field produced by a source …