Engineering Commons^™

Model Of Hot-Film Sensor With Substrate Effects, David Mcalpine Judge

Electrical & Computer Engineering Theses & Dissertations

A detailed mathematical model is constructed to investigate the frequency response of a hot-film anemometer system. Since several diverse factors affect the frequency response, the analysis is broken down into three main parts. Each part is a detailed mathematical model. The first model consists of the ordinary differential equations which govern the electronics of the feedback system and heat transfer of the sensor. An important simplification in this model is that the rate of heat conduction from the sensor to its substrate is constant.

In the second model the unsteady state heat transfer properties of the substrate are examined by …

An Application Of Global Optimization Algorithm For Modal Parameter Identification, Chung-Men Chen

Mechanical & Aerospace Engineering Theses & Dissertations

Single-mode projection filters for modal parameter identification for flexible structures are introduced. An effective two-dimensional global optimization method using interval analysis is combined with the projection filters to facilitate identification for modal frequency and damping. A numerical simulation of a ten-mode structure is presented to illustrate the feasibility of the new method. The projection filters are practical for parallel processing implementation.

A Theoretical Investigation Of The Possibility Of Coexistence Of Three Microbial Populations Competing Purely And Simply In Configurations Of Three Interconnected Chemostats, Shiuan-Wu Chang

Theses

It is known from the literature that out of any number of microbial populations competing purely and simply in an environment which is homogeneous and has time invariant inputs (e.g. in an ideal chemostat) only one population can survive in a steady state under any conditions. However it has been proven possible for two competitors to coexist in two interconnected chemostats, which indicates that spatial heterogeneities may lead to coexistence of pure and simple competitors. The present study investigates whether the spatial heterogeneities created by three interconnected bioreactors may lead to a mixed culture (i.e. coexistence) of three pure and …

Approaches To The Synthesis Of Dentin Bonding Agents Containing Vinyl And Carbamate Functional Groups, Steven W. Amato

Theses

The synthesis of four new monomers containing vinyl and carbamate functional groups was attempted. The desired products were N-m-methacryloxyphenyl-O-phenyl carbamate, N-p-methacryloxy-O-phenyl carbamate, m-N-phenylcarbamato-2-methacryloxyethoxy benzoate, and p-N-phenylcarbamato-2-methacryloxyethoxy benzoate. The carbamate functional group was derived by the Lewis Acid catalyzed reaction of meta-aminophenol, para-aminophenol, meta-aminobenzoic acid, and para-aminobenzoic acid with diphenyl carbonate. The vinyl function was derived, in the case of the aminophenols, by reaction with methacrylyl chloride, and in the case of the aminobenzoic acids, with 2-hydroxyethyl methacrylate.

Partial products only were prepared, these being the two carbamate functional phenols, the two carbamate functional benzoic acids, the two methacryloxy functional derivatives …

Reactions Of Atomic Hydrogen With Dichloromethane In A Flow System, Shun-Hsien Huang

Theses

The reaction kinetics of atomic hydrogen with dichloromethane were studied in a tubular flow reactor with 2.6 cm I.D. Pyrex tube at pressure of 2.1 to 2.7 torr absolute and room temperature . Hydrogen atoms were generated by a microwave discharge plasma. Atomic hydrogen concentration were measured by chemiluminescence titration with nitrogen dioxide. The concentrations of hydrogen atom ranged from 2.0 * 10¹⁴ to 5.0 * 10¹⁵ atoms per cm³. Chlorocarbon reagent and products were monitored by online gas chromatography (FID).

Major products observed were hydrogen chloride and methane. The conversion of dichloromethane increases first to …

Reaction Of Hydrogen With Methylene Chloride And Carbon Tetrachloride At High Temperature, Hun Tsao

Theses

The reactions of methylene chloride and carbon tetrachloride in hydrogen in the temperature range 500 - 1000° C were studied using tubular flow reactors of three diameters. (ID: 0.40, 1.05, 1.60 cm). Residence time range was from 0.3 to 3.5 seconds. Temperature profiles of the reactors was kept within +/- 5° C of central 85% for the 18 inch long reactor, at a total pressure of 1 atmosphere. No chlorinated hydrocarbon products were observed at or above 950° C. The major products in this temperature range were CH4, C2H₂, C2H₄, C2H₆ and HCl.

The pseudo …

Degradation Of Aniline And Nitrobenzene In A Photoreactor, Michael Joseph Sowa

Theses

Degradation of aniline and nitrobenzene in aqueuous solutions was studied. Five reaction processes were utilized, including ultraviolet light, ozone, O₂/UV, O₃/O₂/UV, and H₂O₂/UV. A 30 liter semi-batch gas sparged reactor was used for the development of reaction rate and mass transfer parameters in these systems. The results were used to model a continuous stirred tank reactor (CSTR) for the O₃/O₂/UV case. Reasonable agreement was obtained for steady state exit concentrations between the experimental data and those predicted from the model.

Development Of An Off-Line Robot Programming System For Computer Control Of Ge P50 Robot, Subhas Vitthal Shetty

Theses

The General Electric P50 Robot has Teach Pendent Programming facilities. It is provided with a Computer Linkage - a communication control unit, but is not eguipped with any software which uses this linkage to communicate data between the computer and the P50.

A study was made of many Robot Programming systems existing today. The facilities a programming language should have was noted, and a Robot-Level Programming System was developed, which remote controls the P50 robot.

The program is written in TurboPascal and is developed on IBM PC/AT for communication between the P50 and an IBM PC Compatible Personal Computer. The …

Evaluation Of Word Processing Cost Effectiveness, Nicholas E. Tedesco

Theses

The objective of this thesis is to examine the use of word processing technology to determine if its implementation is a cost effective investment. This will be accomplished by comparing the cost of a typewritten page before and after the implementation or upgrade of word processing equipment. The degree of utilization and the impact of utilization on standard costs will also be examined.

Significant difficulty was encountered attempting to locate and compile statistical information on word processing. Therefore, a questionnaire was developed and distributed to the 100 largest public and 100 largest private companies headquartered in New Jersey, requesting information …

Application Of Robots In Developing Countries, Badi Uddin

Theses

The increasing versatility of robots has led to their use in a widening range of applications. The robot population is growing at a remarkable pace. The increase in the use of robots in industry has changed the standards of productivity and quality. During past years, as labor costs has risen, safety and environmental regulations have been changed to provide more benefits to workers and capabilities of robots became more sophisticated. Therefore, robots became a valuable piece of production equipment.

Now, robots are able to perform all kinds of hazardous and heavy duty jobs which are harmful to human life or …

Self-Flushing Fluid Seal Assembly, David T. Kao

Civil Engineering Faculty Patents

A self-flushing fluid seal assembly is provided to prevent particle intrusion into the main seal around a slurry pump shaft. The assembly includes an annular tube concentrically disposed about the pump shaft and forming a chamber. The volume of the chamber is made variable by a plunger comprising an enlarged diameter portion of the pump shaft movable relative to the chamber during the power and return stroke of the pump. Flushing liquid is delivered to the chamber by means of a feed line extending through the shaft. A check valve provided in the feed line opens to allow the inward …

Acuta Enews September & October 1987, Vol. 16, No. 9 & 10

ACUTA Newsletters

In This Issue

Back to the Future: The Power of 1A2

Party Line

Potpourri

Equal Access Reaches 84% of America

Low Cost Software, Harold M. Cota

Civil and Environmental Engineering

This is the fifth in our series on low cost software available to JAPCA readers. These programs have been developed by APCA members and are provided as a professional courtesy, as is, without warrantee. The authors would appreciate any feedback you have. In addition, we hope you will be willing to share programs you have developed for your own PC. To share your program all you need to do is prepare a brief description, similar to those in this column and send it with your program and any examples or documentations you are willing to furnish to: Dr. Hal Cota, …

Analysis Of Accident Data In Kentucky (1982-1986), Kenneth R. Agent, Jerry G. Pigman

Kentucky Transportation Center Research Report

Kentucky has a systematic procedure to identify locations that have abnormal rates or numbers of accidents. This procedure utilizes average accident rates and numbers. A primary objective of this study was to determine average accident statistics in Kentucky. An annual safety program for Kentucky, which includes the identification, programming, budgeting, and evaluation of safety projects, is prepared each year. The data presented in this report may be included as the problem identification portion of Kentucky's Annual Highway Safety Plan.

Average and critical accident rates were calculated by highway type for rural and urban highways. A summary of results and recommendations …

The Effects Of A Mandatory Early Shutdown Of Maine Yankee, Maine State Planning Office

Maine Collection

The Effects of a Mandatory Early Shutdown of Maine Yankee

Maine State Planning Office - Richard Silkman, Director (September 1987).

Contents: Introduction / Legal Issues / Economic Issues / Health and Environmental Issues / Conclusions / Appendices

Transaction Network: A Parallel Computation Model Based On Consume/Produce Paradigm, Takayuki Dan Kimura

All Computer Science and Engineering Research

This report introduces a new parallel computation model that is suitable for pursuit of large scale concurrency. Our goal is to develop a semantically clean paradigm for distributed computation with fine-grained parallelism. Our approach is to demote the notion of process as the key concept in organizing large scale parallel computation. We promote, instead, the notion of transaction, an anonymous atomic action void of internal state, as the basic element of computation. We propose to organize a computation as a network, called a transaction net, of databases connected by transactions. A transaction, when it is fired, consumes data objects from …

A Turbulence Model For The Heat Transfer Near Stagnation Point Of A Circular Cylinder, Mounir B. Ibrahim

Mechanical Engineering Faculty Publications

A one-equation low-Reynolds number turbulence model has been applied successfully to the flow and heat transfer over a circular cylinder in turbulent cross flow. The turbulence length-scale was found to be equal 3.7y up to a distance 0.05δ and then constant equal to 0.185δ up to the edge of the boundary layer (wherey is the distance from the surface and δ is the boundary layer thickness).

The model predictions for heat transfer coefficient, skin friction factor, velocity and kinetic energy profiles were in good agreement with the data. The model was applied for Re ≤250,000 and Tu_{∞ …}

Irish H & V News

Building Services Engineering

No abstract provided.

Size Distribution Of Sediment As Affected By Surface Residue And Slope Length, John E. Gilley, S. C. Finkner, G. E. Varvel

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Runoff samples for determination of size distribution of sediment were collected under simulated rainfall conditions at selected downslope distances on plots covered with sorghum and soybean residue at rates ranging from 0.00 to 6.73 t/ha . The effects of surface residue and slope length on size distribution of sediment were evaluated. Substantial movement of sediment in the form of aggregates was found for each of the residue treatments. Significant differences in size distribution of sediment occurred between residue treatments. For a given residue rate, differences in sediment size distribution were found between sorghum and soybean residue. Size distribution of sediment …

Decision-Directed Multivariate Empirical Bayes Classification With Nonstationary Priors, Wynn C. Stirling, A. Lee Swindlehurst

Faculty Publications

A decision-directed learning strategy is presented to recursively estimate (i.e., track) the time-varying a priori distribution for a multivariate empirical Bayes adaptive classification rule. The problem is formulated by modeling the prior distribution as a finite-state vector Markov chain and using past decisions to estimate the time evolution of the state of this chain. The solution is obtained by implementing an exact recursive nonlinear estimator for the rate vector of a multivariate discrete-time point process representing the decisions. This estimator obtains the Doob decomposition of the decision process with respect to the a-field generated by all past decisions and corresponds …

Advanced Communications Systems, Jonathan S. Turner

All Computer Science and Engineering Research

The Advanced Communication Systems Project is concerned with new communication technologies that can support a wide range of different communication applications in the context of large public networks. Communications networks in common use today have been tailored to specific applications and while they perform their assigned functions well, they are difficult to adapt to new uses. There currently are no general purpose networks, rather there are telephone networks, low-speed data networks and cable television networks. As new communications applications proliferate, it becomes clear that in the long term, a more flexible communications infrastructure will be needed. The Integrated Services Digital …

Computered-Aided Digital Filter Design And Simulatio, Pao-Tsan Chiang

Theses

The simulation is written by C language on AT&T Unix pc 7300 environment, some fundamental mathematics is introduced in the beginning, then digital filter specification method: window, frequency sampling, equiripple are discussed, and Kaiser window method is discussed in details for programming.

There are many problems are met in my simulation, such as F.F.T. aliasing, leakage, Picket fence convolution, correlation, but solutions are proposed.

The result could be output data and graph, GSS_Drivers graph package is utilized, because consideration of operation speed and convenience are emphasized, speed is compromised, but easy to be restructured.

A Dsp Toolkit For The Unix/C Environment Of The Pc 7300 Compute, Suwutchai Jesdanun

Theses

The Digital Signal Processing (DSP) TOOLKIT is a package of programs designed to use the fast Fourier transform (FFT) and display its output responses in graphics form. This tool provides three different window functions and five data modifiers for filter designing and spectrum analysis. Flexible features for modifying the plottings, such as y-axis auto-scaling, xy-axis scaling and center line adjusting of the graphics display, are included.

All programs are written in C programming language for the UNIX System Environment of the UNIX PC 7300 computer. The program structure of DSP TOOLKIT is designed so that modules can be added or …

A Prognostication Of Just-In-Time Efficacy In American Manufacturing, Mark L. Kahan

Theses

"Just-in-time" is a Japanese philosophy of business management which has as its ideal the complete elimination of waste in the process of adding value to a product. Some experts have contended that its basis is not cultural, but technical, and is thus applicable to American manufacturing concerns. After an initial exploration of economics and productivity concepts, and of U.S. logistics, inventory, and purchasing practices, the matter of Just-in-time will be addressed, both theoretically and in terms of Japanese business and labor relationships and culture. Then, based upon a case study consisting of observations made at a traditional American manufacturer, this …

Post-Cracking And Nonlinear Microcomputer Analysis In Reinforced Concrete Beams, Pedro Ricardo Munoz Arias

Theses

The main objective of this Thesis work is to study a non-linear behavior of reinforced concrete structures using the Finite Element Method and an incremental load strategy.

Bond between steel and concrete is simulated using linkage spring elements. The proposed model has a generalized crack propagation capability and it accounts for nonlinearities due to cracking and material properties.

Load-displacement relationships describing the aggregate interlock along the crack and the dowel action at the level of reinforcement are incorporated into a computer program.

A simply supported reinforced concrete beam is analyzed from zero load until failure. Contributions to the shear capacity …

Implementation Of Inverse Multiprofile Streak Technique, Brian Edward Fuchs

Theses

The inverse multiprofile streak technique is a new measurement technique available to researchers and was implemented to better achieve measurements on detonation phenomena. This technique provides the wave front geometry around the perimeter of an explosive charge through the use of multiple slits placed on the charge and a high speed streak camera. Testing, analysis, and methodology for this technique are presented in order to provide information to interested researchers. A personal computer program and sample tests are included to illustrate the method used.

Thermal Decomposition Of Dichlorobenzene In An Atmosphere Of Hydrogen And Helium, Mingta Hung

Theses

Reactions of dilute mixtures of dichlorobenzene in hydrogen and in helium were studied in a tubular reactor at a pressure of 1 atm, residence times of 0.04 to 2.7 seconds, and temperature range of 825 to 1000° C. Product distributions at various reaction conditions are measured with a flame ionization detector gas chromatograph, and qualitative analysis of batch samples was also performed by GC/Mass Spectrometry. The major products were observed as the thermodynamically stable species, HC1, Cis), benzene and chlorobenzene. Thermal reaction in helium at 1 second residence time in 1.05 cm ID reactor yielded less benzene and chlorobenzene when …

The Development Of Technical Instructional Materials For Industrial Technology Students, David D. Bradney

Graduate Research Papers

The purpose of the research was to develop a usable reference document for graduate students, graduate assistants, undergraduate students, and others who must write technical instructional materials.

Precipitation Of Scale-Forming Materials From Solution, William A. Hockings, Duane M. Thayer

Michigan Tech Patents

Scale-forming metal oxides and carbonates, such as cupric oxide, can be precipitated from an ammoniacal leaching solution with minimum scale buildup by distilling the solution in an externally heated distillation chamber mounted for rotation about a generally horizontal axis. The distillation chamber includes a plurality of axially spaced annular baffles defining a plurality of compartments containing a tumbling medium, such as spherical balls. The solution is continuously introduced into the inlet end of the chamber and heated under pressure to a temperature above its boiling point as it flows over the baffles toward the outlet end of the chamber. A …

29th Rocky Mountain Conference

Rocky Mountain Conference on Magnetic Resonance

Program and abstracts from the 29th annual meeting of the Rocky Mountain Conference, co-sponsored by the Rocky Mountain Section of the Society for Applied Spectroscopy and the Rocky Mountain Chromatography Discussion Group. Held in Denver, Colorado, August 2-6, 1987.