Engineering Commons^™

The Importance Of Computer-Based Subject Matter Topics For Graduates Of An Undergraduate Manufacturing Technology Program As Perceived By Practicing Manufacturing Engineers, Anthony Cecil Favre

Dissertations and Theses @ UNI

The problem of this study was to identify the perceptions of practicing manufacturing engineers regarding the importance of computer-based subject matter topics required for graduates of undergraduate manufacturing technology programs. This problem is reflective of the literature which indicates that there is a need for the further development of manufacturing science curricula in order to provide the types of knowledge needed in the emerging computer-based manufacturing field.

A questionnaire was used to collect data. It was mailed to 425 randomly selected practicing manufacturing engineers. Thirteen were returned as undeliverable, thus reducing the number to 412. The size of the sample …

Electrochemical Production And Corrosion Testing Of Amorphous Ni-P, Jose L. Carbajal, Ralph E. White

Faculty Publications

Ni-P alloys were prepared by electrodeposition under different conditions on a rotating disk electrode. A variety of alloys were prepared ranging from Ni-15P to Ni-25P. An indirect reduction of species in solution involving several steps appears to be favored over the direct reduction at the electrode based on the low P content in the alloy. Energy dispersion x-ray microanalysis was used to determine composition of the alloy. Transmission electron microscopy and x-ray diffraction corroborated the amorphous nature of the structure. The physical and chemical homogeneity of the metallic glasses produced electrochemically is substantiated by the absence of electrochemical localized attack. …

Monitoring Natural Air Corn Drying—A Demonstration Project, Richard O. Pierce, Gary L. Zoubek

Department of Agricultural and Biological Systems Engineering: Faculty Publications

A demonstration project is described where natural air corn drying performance was monitored weekly and drying results were printed in a local newspaper. The newspaper articles also gave management recommendations for the upcoming week. Similar demonstration projects can be conducted using the procedures described in this paper.

Correlation Of Starch Recovery With Assorted Quality Factors Of Four Corn Hybrids, Curtis L. Weller, Marvin R. Paulsen, Marvin P. Steinberg

Department of Agricultural and Biological Systems Engineering: Faculty Publications

A laboratory wet-milling process was developed for use in determining starch recovery of yellow dent corn. The effects of harvest moisture and drying air temperature on starch recovery were investigated for four hybrids. A split split-plot experimental design was used to evaluate the effects. Starch recovery was not significantly different among the hybrids; however, it did decreases both harvest moisture and drying air temperature increased. Starch recovery was correlated with quantitative measures of assorted quality factors. Regression analysis found starch recovery to be a function of starch content, test weight, and ethanol-soluble protein.

Calibration Accuracy Of Pesticide Application Equipment, Robert Grisso, E. J. Hewett, Elbert C. Dickey, R. D. Schnieder, E. W. Nelson

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Afield survey of 140 private and commercial pesticide applicators was conducted during the spring of 1986 in 12 counties of central and eastern Nebraska. The results showed that one out of every three cooperators was applying pesticides within ± 5% of their intended application rate. Results indicated that applicators have reduced application errors from that of a similar survey conducted in 1979. However, most errors still can be traced to incorrect calibration. Ninety-four percent of the cooperators used some type of calibration method. Two-thirds used the "Known Area" method. Those using a calibration method more than once a year had …

Surface Cover From Corn Residue On Sandy Soils, R. Todd, Norman L. Klocke, Elbert C. Dickey, Dennis Bauer

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Corn residue left as surface cover after land preparation and planting by various combinations of tillage implements and surface planters, respectively, was measured on four research/ demonstration sites with sandy soils in Nebraska. Surface cover ranged from 51 to 80% for the no-till treatments to 14 to 53% for the twice-disked treatments. The wide range in cover was due to the amount of antecedent residues from the previous crop and the soil type which ranged from sandy loam to tine sands. Other tillage implements included a rolling cultivator, sweep-plow, and mulch-treader.

Can We Guarantee The Safety Of Genetically Engineered Organisms In The Environment?, Kathleen H. Keeler, Frances E. Sharples

School of Biological Sciences: Faculty Publications

Can we guarantee the safety of genetically engineered organisms in the environment? To anticipate my remarks, the answer to the title question is “No, we cannot guarantee the safety of genetically engineered organisms released into the environment.” Indeed, it is a tenet of the scientific method that nothing can be proved, only disproved. Thus, we can never show that a release will be safe. We could only show that it would be unsafe, if that were the case. However, if the question is posed differently, for example, can we safely release genetically engineered organisms into the environment?, the answer is …

Oxygen Reduction On Silver In 6.5 Molar Caustic Soda Solution, Prosper K. Adanuvor, Ralph E. White

Faculty Publications

No abstract provided.

A Two-Dimensional Mathematical Model Of A Porous Lead Dioxide Electrode In A Lead-Acid Cell, E. C. Dimpault-Darcy, T. V. Nguyen, Ralph E. White

Faculty Publications

A two-dimensional mathematical model is presented for a lead dioxide electrode in a lead-acid cell. It is used to simulate the time dependent behavior of the electrode during discharge. The model contains six dependent variables: the concentration of the acid electrolyte, the porosity, the electrical potentials of the solid and solution phases, and the two directional components of the current density in the electrolyte. The effect of the electrode grid was included by varying the conductivity of the solid. Parameters such as electrode conductivity, electrode dimensions, and temperature are investigated to understand their effects on electrode discharge performance.

Secondary Current Distributions Using Topaz2d And Linear Kinetics, E. C. Dimpault-Darcy, Ralph E. White

Faculty Publications

Secondary current density distributions are of interest
to cell designers. The purpose of this note is to illustrate
how to use an existing numerical method to determine
these distributions for cells that contain conducting and
nonconducting bodies between the main anode and cathode.

Analysis Of Electrokinetic Data By Parameter Estimation And Model Discrimination Techniques, Prosper K. Adanuvor, Ralph E. White

Faculty Publications

An alternative approach to classical methods of electrochemical data analysis is presented. This alternative method is based on nonlinear parameter estimation and model discrimination techniques. The method is used to obtain the relevant kinetic and transport parameters and to elucidate the kinetic mechanism of O₂ reduction at carbon and silver electrodes in alkaline electrolytes.

A Mathematical Model For Predicting Cyclic Voltammograms Of Electronically Conductive Polypyrrole, Taewhan Yeu, Trung V. Nguyen, Ralph E. White

Faculty Publications

Polypyrrole is an attractive polymer for use as a high energy density secondary battery because of its potential as an inexpensive, lightweight, and noncorrosive electrode material. A mathematical model to simulate cyclic voltammograms for polypyrrole is presented here. The model is for a conductive porous electrode film on a rotating disk electrode (RDE) and is used to predict the spatial and time dependence of concentration, overpotential, and stored charge profiles within a polypyrrole film. The model includes both faradaic and capacitive charge components in the total current density expression.

Predicting Shunt Currents In Stacks Of Bipolar Plate Cells With Conducting Manifolds, H. S. Burney, Ralph E. White

Faculty Publications

A method is presented for predicting shunt currents in stacks of bipolar plate cells with conducting manifolds. The method is based on the requirement that the potential drop through the solution in a manifold be large enough to force current to leave the solution and to enter the conducting manifold. The current that leaves the solution in the manifold enters the conducting manifold at the anode end of the stack and returns to the solution at the cathode end. This could cause catastrophic failure of a manifold.

Oxygen Reduction On Silver In 6.5m Caustic Soda Solution, Prosper K. Adanuvor, Ralph E. White

Faculty Publications

The cathodic reduction of oxygen in 6.5M membrane-grade caustic soda solution has been studied experimentally at a silver rotating disk electrode at 25°C. The results can be approximated by the parallel mechanism for oxygen reduction with catalytic decomposition of peroxide. Further analysis of this mechanism indicates that the sequential process with catalytic decomposition of peroxide predominates over the direct 4e^– process. Direct application of the sequential mechanism to the data indicates that the latter mechanism with catalytic decomposition of peroxide much more accurately reflects the experimental results. The relevant kinetic parameters are calculated on the basis of …

A Mathematical Model For The Electrodeposition Of Alloys On A Rotating Disk Electrode, Shiuan Chen, Ken-Ming Yin, Ralph E. White

Faculty Publications

A general multiple electrode reaction model for electrodeposition of alloys on a rotating disk electrode is presented. Included in the model are mass transport equations with the effect of ionic migration, Butler-Volmer kinetic rate expressions, and the mole fractions of the individual components in the solid state. The model shows that the effect of ionic migration is important and that plating variables such as applied potential, pH, and bulk concentration can be included. Two examples (Ni-P and Ru-Ni-P) are used to illustrate the predictions of the model.

Electrodeposition Of Copper-Nickel Alloys From Citrate Solutions On A Rotating Disk Electrode, Ramona Y. Ying, Patrick K. Ng, Z. Mao, Ralph E. White

Faculty Publications

A mathematical model is developed to simulate the electrodeposition of Cu-Ni alloy from citrate solutions onto a rotating disk electrode under potentiostatic control. The model includes the influence of diffusion, ionic migration, forced convection, and homogeneous equilibria. The three major electrochemical reactions treated in the model are copper deposition, nickel deposition, and hydrogen evolution. Using experimental parameters when available, the model was fitted and tested against experimentally-obtained results for different bath compositions and operating conditions. The model agreed reasonably well with the experimental results particularly in the codeposition region, –1.0 to –1.2V vs. SCE, where hydrogen evolution is not the …

Accelerator Waveform Synthesis, Jay Wilson Heefner

University of the Pacific Theses and Dissertations

The Induction Linac System Experiment (ILSE) is a heavy-ion fusion (HIF) device that is being designed at Lawrence Berkeley Laboratory (LBL). The machine will be capable of accelerating 16 carbon ion beams, which are subsequently merged into 4 beams, to energies in the neighborhood of 10 MeV (10 million electron- volts). The purpose of the experiment will be to demonstrate the process of simultaneous acceleration and current amplification for a multiple beam accelerator configuration. If this process can be mastered, the beams produced by a machine such as ILSE would be used to implode and heat a deuterium-tritium (D-T) fuel …

Human Health Effects Assays, Ronald C. Sims, J. L. Sims, R. R. Dupont

Biological Engineering Faculty Publications

Environmental health risk assessments based upon animal study results, epidemiology, quantitative structure activity relationships (QSARs), dose-response relationships, risk perception, and expert systems approaches, and the evaluation of mechanisms of carcinogenesis represent the focus for 1987. The term "biological risk assessment" was discussed by Clayson¹ to describe that part of risk assessment concerned with the relevance of specific animal results to the induction of human cancer. Guidelines for health assessment of suspect developmental toxicants addressed evaluation of data from animal testing studies.² Animal toxicity data on 200 chemicals and epidemiologic data on 30 chemicals was included within a data …

Biological Transformation And Detoxification Of 7,12-Dimethylbenzanthracene In Soil, K. Park, Ronald C. Sims, W. J. Doucette, J. E. Matthews

Biological Engineering Faculty Publications

Biological transformation and detoxification of 7,12-dimethylbenz(a)anathracene (DMBA) were studied in a nonacclimated sandy loam soil. Parent 14C DMBA biodegraded extensively (62% to 20%), accompanying an increase of metabolite 14C fraction (4% to 53%). Incorporation of DMBA into non extractable soil residue ,4C increased from 12 to 17%, but the increase was not statistically significant. DMBA was transformed into several metabolic products in the soil system, including 4-hydroxy-, 5-hydroxy-, and 10-hydroxy-DMBA and 7,12-dihydro 12-methyl-7-methylene-benz(a)anthracene-12-ol. High polarity transformation products of DMBA demonstrated a negative mu tagenic response with the Ames mutagenicity assay, strain TA 100, for both low and neutral pH soils. …

Fate And Transport Of Organics In Soil: Model Predictions And Experimental Results, B. D. Symons, Ronald C. Sims, W. J. Grenney

Biological Engineering Faculty Publications

Laboratory batch reactors were used to generate quantitative information about the fate of polynuclear aromatic hydrocarbon (PNA) compounds in soil systems. First-order degradation rates and equilibrium partition coefficients determined in laboratory studies were used in the Vadose Zone Interactive Processes (VIP) mathematical model to predict the fate and behavior of the PNA compounds as a function of time and soil depth. Predicted model results were compared with independent laboratory soil column studies for model validation. The VIP model provided a good approximation of the degradation and transport of the seven PNA compounds evaluated after 6 months of incubation in soil. …

Great Salt Lake Interisland Diking: Water Quality Considerations, Executive Summary, Utah Water Research Laboratory, J. P. Riley, J. I. Blandamer, W. J. Doucette, R. R. Dupont, A. W. Grover, J. Herrick, J. M. Ihnat, J. E. Mclean, M. W. Nath, S. R. Rushforth, J. L. Sims, R. C. Sims, W. A. Wurtsbaugh

Reports

No abstract provided.

Stochastic Interpolation Of Precipitation Data From Multiple Sensors, D. J. Seo, A. Azimi-Zonooz, D. S. Bowles, W. F. Krajewski, C. J. Duffy, K. P. Georgakakos, T. H. Lee

Reports

Introduction: This report summarizes the work conducted under Grant No. ECE-8419189, "Stochastic Interpolation of Precipitation Data from Multiple Sensors," which was awarded to Utah State University in September, 1985, and completed February 29, 1988. it also covers work under a supplemental award made in February, 1986. The final report is organized into four sections. The following section presents the objective of the research and a brief problem statment. Section 3 contains a summary of second-year work including the project team, work plan, work completed, and publications. In Section4, project conclusions are summarized. A summary of on-going future work is given …

Great Salt Lake Interisland Diking: Water Quality Considerations, John I. Blandamer, William J. Doucette, Ryan R. Dupont, Anthony W. Grover, James Herrick, Jean M. Ihnat, Joan E. Mclean, Michael W. Nath, Samuel R. Rushforth, Judith L. Sims, Ronald C. Sims, Wayne A. Wurtsbaugh

Reports

No abstract provided.

Friction Factor Tests On High Density Polyethylene Pipe, Steven L. Barfuss

Reports

No abstract provided.

Vilma (Virtually Interactive Large Scale Model For Arkansas), Rosalinda R.A. Cantiller, Richard C. Peralta

Civil and Environmental Engineering Faculty Publications

This user’s guide supports the use of VILMA (Virtually Interactive Large-scale Model for Arkansas). This document presents the basic concepts in Chapter I. Chapter II discusses the execution steps that the user follows during a VILMA session. Chapter III provides a detailed illustration of example data files. Chapter IV presents two example VILMA sessions. Finally, Chapter V elaborates on additional concepts. The Appendices consist of relevant program listings, instructions, and example files. In this user’s guide, the word "interactive" means the user enters his responses to the prompts that appear on a computer terminal while he is logged on to …

Matrix Methods Of Approximating Classical Predator-Prey Problems, E. Y. Rodin, R. Greenberg, B. Nelson

Computer Science: Faculty Publications and Other Works

No abstract provided.

Oxygen Tension Profiles In Tumors Predicted By A Diffusion With Absorption Model Involving A Moving Free Boundary, B. H. Arve, Athanasios I. Liapis

Chemical and Biochemical Engineering Faculty Research & Creative Works

The dynamic behavior of the oxygen tension distribution in tumors during radiotherapy is studied by the development and solution of a diffusion with absorption model involving a moving free boundary. The oxygen uptake rates within the tumor are considered to be functions of the oxygen concentration and results are presented for zeroth-, half-, first- and second-order rates of absorption, as well as when the rate of oxygen absorption is described by the Michaelis-Menten expression. The results presented in this work may be used together with the data from the oxygen radiosensitivity curve of a tumor, in order to determine the …

A Practical C Language Compiler/Optimizer For Real-Time Implementations On A Family Of Floating Point Dsps, J. Hartung, Steven L. Grant, S. G. Haigh

Electrical and Computer Engineering Faculty Research & Creative Works

Digital signal processors (DSPs) have traditionally been used in real-time applications with very high data throughput. For this reason, system designers have been reluctant to accept the degradation in performance inherent in machine code compiled from high-level languages such as C. The problem is compounded by the fact that DSPs use pipelined architectures to achieve their high data throughput, resulting in hazards and latencies between instructions. Simple compiler implementation cannot take advantage of latent instructions, resulting in a conservative and inefficient executable program. This problem has been addressed in the C compiler package for the AT&T WE DSP32 by the …

Linear State Variable Dynamic Model And Estimator Design For Allison 1406 Gas Turbine Engine, Vittal S. Rao, D. Moellenhoff, J. A. Jaeger

Electrical and Computer Engineering Faculty Research & Creative Works

This paper describes a procedure for developing a State Variable Model for the Allison T406 gas turbine engine. This linear model is useful for designing controllers using modern control techniques. The engine and V-22 rotor system is modeled around an operating point by using four state variables and one input variable. For a given power setting, it is observed that two linear models are sufficient to represent the engine dynamics over the entire flight envelope. A relationship between surge margin and the state variables is also developed. It is demonstrated that these linear models are useful in designing an estimator …

Distribution Automation For The Association Of Missouri Electric Cooperatives—A Statewide Evaluation Of Load Management, Jack F. Morris, Frank J. Kern

Electrical and Computer Engineering Faculty Research & Creative Works

Presented is an in-depth technical and economic feasibility study utilizing one- and two-way management systems for statewide load control and distribution automation. Included are 1) an evaluation of the generation and transmission load patterns of the state cooperatives and the determination of the amount of controllable load for use by a load management system, 2) an in-depth economic cost-benefit study as a result of implementing a load management system on a statewide basis, 3) communication alternatives for implementing the statewide load management and distribution automation system, 4) an investigation into using an existing statewide microwave communications system for direct load …