Engineering Commons^™

Learning In A Virtual Classroom : Volume 1 Of A Virtual Classroom On Eies : Final Evaluation Report, Computerized Conferencing & Communications Center, Starr Roxanne Hiltz

Computerized Conferencing and Communications Center Reports

The Virtual Classroom [TM] is a system for learning and communicating via connected computers. Students in the Virtual Classroom share their thoughts, questions and reactions with professors and classmates using computers equipped with specially designed software. The software enables students to send and receive messages, interact with professors and classmates, read and comment on lecture material, take tests and receive feedback, and more, without having to attend scheduled classes. Learning can take place at any location in the world and at any time of the day using a computer on campus, at home or in the workplace.

The primary goal …

Multaid, A Consultant For Multi-Microprocessor Network Selection, Bernabe Javier Arruza

Theses

A knowledge based system has been developed to enable an architectural designer to select an adequate interconnection network to be utilized in a parallel or distributed processing system. It is implemented using the Knowledge Engineering Environment, K.E.E., package from IntelliCorp.

The user will interact with the system through symbolic representation. From the selected symbols, the knowledge base system will identify the most appropiate network for the given application. The system will display the network topology along with all the information and results of all pertinent calculations corresponding to the given network. The program will also display the rule driven search …

The Switch Capacitor Biquad Filter And It's Application On Active Filter Design, Sung-Chiang Chang

Theses

The purpose of this subject is to use the programmable switch capacitor filter to design a traditional analog filter which usually cause a tedious job on finding a group of values for resistors and capacitors. We start from the basic concept of switch capacitor, then we learn to use auxiliary equipment to design a filter. To design the desired filter, first, we have to find the s-domain transfer function, then transfer it to the z-domain. After we found the coefficients of z-domain transfer function, we have to implement this on the auxiliary equipment. Then we will get the desired filter.

Synthesis And Characterization Of A Novel Blocked Isocyanate Dental Adhesive Based On Diphenylmethane - 4, 4' - Diisocyanate, Yangming Lin

Theses

The dental adhesive monomers based on diphenylmethane - 4,4 - diisocyanate (MDI) were prepared and studied in this research. The diisocyanate, MDI, was first reacted with hydroxyethyl methacrylate (HEMA) to form an intermediate adduct. This adduct had an active isocyanate end group. It was then bonded with o-chlorophenol (OCP), a blocking agent, to produce a blocked isocyanate monomer.

The new blocked isocyanate (HEMA-MDI-OCP) was found to have an average value of more than 1200 psi in tensile tests measuring its adhesion to dentin slices.

Hydrodechlorination Reactions Of Trichloroethylene And 1,1 1, Trichloroethane Over Alumina Supported Palladium Catalysts, And, Trichloroethylene Over Nickel Catalyst, Atul R. Shah

Theses

The primary objective of this study was to evaluate the viability for conversion of chlorocarbon wastes solvents into useful hydrocarbons and HCl by catalytic reduction. The second objective was to investigate the pathways for these hydrodechlorination reactions over the chosen alumina supported Palladium and nickel catalysts as well as determine selectivities, product distribution, and deactivation mechanism.

Reactions of trichloroethylene with hydrogen over alumina supported palladium catalyst was studied in temperature range 40°C to 57°C at one atmosphere total pressure. The major products observed were ethane and (cis) 1,2 dichloroethylene with trace products chloroethylene, chloroethane and (trans) 1,2 dichloroethylene. At the …

Thermal Desorption Of Hazardous And Toxic Organic Compounds From Soil Matrices : Dichloromethane, Chloroform, Benzene, Toluene, 1-Chloronaphthalene, 1, 2, 4-Trichlorobenzene, Arun S. Chemburkar

Theses

This research project was undertaken to understand the process of desorption/removal of organic compounds from soil matrices under the influence of temperature and gas purging. The project was divided in two parts :

A. Plug deposition experiments: Columns packed with soil matrices were purged with an inert gas under isothermal conditions. Organic compounds were then introduced as a plug on the front of the column by on-line injection. The rate of passage (due to sequential adsorption/desorption) of the plug through the various soil matrices was measured by a gas chromatograph equipped with a flame ionization detector (FID). The compounds studied …

Engraving By Cnc Milling Machine, Ram Tatiparti Reddy

Theses

A detailed study of NC, CNC and Engraving is presented. Engraving of letters of different sizes is done using the present technology in a CNC milling machine. This thesis also contains the design of a communication interface between Mark Century One Plus controller and different peripherals. Software for Engraving and Communication between the controller and a PC is developed. The generated NC code from software is simulated on the controller and the product is cut.

Adsorption Of Nickel And Lead With Activated Sludge, Chi-Yun Chen

Theses

Wastewater produced in domestic, commercial, and industrial activities often contains significant amounts of metals. This would result in the discharge of heavy metals into the sewer system. Some of the heavy metals can be adsorbed by activated sludge. This may present a problem for the treatment and ultimate disposal of sludge.

The purpose of the research was to determine how much metals can be adsorbed by sludge. Nickel and Lead were selected for this investigation because of their environmental significance. Both belong to priority pollutants considered potentially toxic. Factors affecting the adsorption, such as sludge concentration, metal concentration, mixing condition, …

Development Of A Low Cost Pc Based Robot Vision System, Raghunandan Jadhav

Theses

There has been a continued. interest in utilizing machine vision systems for robot guidance applications. Commercial vision systems can be programmed to give information about the parts in the robot work area and this information can be used by the robot computer to guide the robot. In most applications, however, the vision information cannot be easily integrated with the robot control language. This thesis considers implementation of part identification routines directly into a robot guidance language. This makes all the complicated machine vision algorithms transparent to the user and allows him to treat higher level vision functions as an extension …

Calculation Of Heat Transfer At The Center Of A Round Plate, In Forced Convection Stagnation Flow, Ali Rohafza

Theses

The theoretical study presented here examines heat transfer at the center of a round plate, in forced convection stagnation flow.

Note that in the region of stagnation point, the flow is always laminar.

Important results presented include the variations of the similarity function f and its derivative f’ with the vertical coordinate; these results were found by using the power series method to solve the governing non-linear differential equation. In order to do that , certain things were assumed like, for example, as the point at which two solutions were spliced, η₀ =2.0, or assuming the solution at η …

Digital Network Implementation By Xilinx Asic Technology, Maoling Shen

Theses

Using XACT(XILINX Advanced CAD Technology) to implement a digital network, which is used in an 8052AH-BASIC single board computer system as one of its interfaces called MIDVOX.

MIDVOX comprises of three major parts.

1. Voice Detector

2. Waveform Generator and Frequency Divider

3. Signal Processing and Storing Unit(PSU)

Digitized voice signals are inputed to the network as BEG. Their periods are then counted by a 12 bit binary counter. Finally they are stored into memories by means of a series of 12 bit binary numbers. The value of the number depends on the length of a period of that particular …

Closed Loop Machining In Precise Turning, Ching-Song Wei

Theses

Closed loop machining (CLM) is one of the most reliable ways to automate tool setting, part positioning and measurement on CNC machine tool. It not only can assure the quality of the product but also can improve the productivity of the machine. This paper describes the CLM from basic turning concept to application of CLM, including the feature of Mark Century 2000T and the programming methods in precise turning.

The hardware and software requirements for CLM system were presented. The algorithm for CLM programs was developed completely with a series of flow charts. Then, on the base of two projects, …

The Fast Fourier Transform In Assembly Languages Of Microprocessor 68000 And Microcontroller 8052, Hari Kumar Baldawa

Theses

In this report, the 256 point radix-2 FFT algorithm is written in assembly languages of microprocessor 68000( or 68008) and microcontroller 8052( or 8051). The data used can be upto 30 bits, of which the least significant 12 bits are assigned for fractional part.

The FFT code in assembly of 68000 is written for Sinclair's QL-100 personal computer with 68008 CPU. The SuperBASIC programs are used to access and test the performance of FFT code. The average time of execution falls between 0.3 to 0.4 seconds for 256 discrete points.

Again, same FFT algorithm is written in assembly language of …

The Evaluation Of The Ti-Speech System On Pc Computer, Ying Wu

Theses

A PC-TI-SPEECH system has been set up by the author of this thesis on the IBM PC/AT compatible computer. The basic functions of the system are as follows: data acquisition, internal signal synthesization, signal processing and speech recognition. The system is built up by a PC, TI-Speech Hardware kit, MADCAP software package,TI-Speech Tool kit. This thesis covers the setup, evaluation and operations of the complete PC-TI-SPEECH system, development of the system for further applications, and operations of running some evaluation programs generated by doing this thesis.

Programming For The Prediction Of Thermodynamic Phenomena, One Kwon Rim

Theses

A Thermodynamic Calculation Program was developed. The program contains the calculation procedure for VAPOR/LIQUID EQUILIBRIUM(Isothermal P-X data and T-X data), HEAT-OF-MIXING(liquid mixture data) and LIQUID/LIQUID EQUILIBRIUM SEPARATION data. The program may optionally use the Knox Molecular(GAM), UNIQUAC, NRTL, Wilson and Redlich-Kister equations, and is prepared to accept any kind of model which will be developed in the future. This program also performs parameter file creation, parameter input, updating of parameters, and is structured to allow implementation of data regression when program is updated. Comparison and analysis of each function were executed using this program. It was revealed that VLE(Vapor-Liquid Equilibrium) …

Multichannel Priority Interrupt System, Claudio Bernal

Theses

There is in our current industrial milieu an increasing demand for systems capable of detecting and processing a large number of analog signals for the computer.

The present work offers an approach for a multichannel real time acquisition system which will find a wide variety of applications in machine automation, process control, musical instruments, remote sensing, etc.

The system presented in this thesis follows traditional instrumentation architecture and implements that architecture around the latest microcontroller, the 8052. The system, capable of assigning a processing priority to a large number of incoming events, is demostrated for 40 channels. It is fast …

Reliability Of Existing Bridge Inspection And Evaluation Procedures, Leroy R. Klouser

Theses

In general, bridge inspection is subjective since visual observation and the basic inspection tools cannot reveal hidden structural deterioration, such as corrosive and delaminated rebars embedded in the concrete. Based on the NJDOT SI&A report, a scale (9 to 0) is used in rating five bridge components. This approach seems reasonable, since the time span, manpower and cost are limited throughout the counties of New Jersey. On the other hand, based on the scaling system, the SI&A reports can vary depending upon the exposed surface appearance and the experience of the bridge inspector.

Water, de-icing agents, freezing and thawing cycles …

Morphological Analysis Of Microvessels Using High Voltage Electron Microscopy (Hvem), Ibm Personal Computer And 3-D Reconstruction Software, Wieslaw Slawomir Krajewski

Theses

The mesenteric arterioles (outer diameter < 100 µ) from a normotensive and a hypertensive dog were perfused in situ, excised, post-fixed and embedded in Spurr medium block. Thick serial cross sections (0.5 µ) of the vessels were obtained from hand formed mesas and placed on Formvar coated slot grids.

The cross sections were subjected to High Voltage Electron Microscopy (HVEM) and five or more electronmicrographs were taken to cover the individual cross sections. The prints of electronmicrographs were linearly enlarged (3X) and made into photomontages of sections. The membrane contours in the montages were traced on transparent overlays, producing polygons which in turn were traced on GTCO digitizing pad. All polygons were labeled, color coded and stored in IBM PC's filing system. The vessels were reconstructed from up to 100 whole cross sections and subjected to cell compartmentalvolume analysis. The reconstructed images can be …

8085 In-Circuit Emulator For Ibm Personal Computer, Joong Bin Lee

Theses

As microprocessor-based systems become gradually larger, the developers need good tools for debugging the hardware and software. The emulators for the IBM Personal Computer using an RS-232 serial port are available in the market. But it takes quite a long time to download the user file to the memory of the emulator or the target system. This emulator is an add-on card dedicated for IBM Personal Computers. The emulator communicates with the IBM Personal Computer through the I/O channels on the mother board instead of the serial port, so its speed is much faster than that of the serial port. …

Use Of Latex Modified Concrete For Repairs And Overlays, Chen-Hoang Lo

Theses

Latex modified concrete and polymer concrete have been widely used for bridge deck overlays and crack repairs for the past decade. In recent years, many of these repaired structures were found to be defective. The causes of these failures are not clearly confirmed. Some blame the quality of the latex products while manufacturers accuse the contractors of improper placement and/or surface preparation. While most of these failures largely appeared to be debonding and delamination of the overlays, excessive cracks, possibly shrinkage cracks, were also reported in the overlaid LMC.

To evaluate the suitability of using latex modified concrete for crack …

Optimal Design Aspects Of A Unit Treating Hazardous Wastes Via Biodegradation : A Theoretical Approach, Farnaz Saghafi

Theses

The treatment of wastes via biodegradation is a widely utilized technique in most industries today. The kinetics of biodegradation, in most cases, follow either the Monod (non-inhibitory) or Andrews (also known as Haldane, inhibitory) model as indicated by published experimental data. The present study investigates aspects of the optimal design of a unit treating wastes when the biodegradation kinetics are those mentioned above. The criterion of optimality is the minimum volume achieving a desired conversion under given load conditions.

Two alternatives from the point of view of the number of vessels (one and two), and three alternatives from the operational …

Fault Location And Control Optimization Planner (Expert System Approach), Fenil Shah

Theses

FALCON is a rule based expert system designed to control a process being regulated by "intelligent" controllers which would at each time and stage execute a series of diagnostic or decision tests and only then initiate a control action identified by the process engineer. The current implementation includes fault identification, diagnostic and process settings in case of low efficiency and poor quality in the product. This research is a part of large research project in flexible manufacturing.

The system is intended to grow into a complete diagnostic master and take corrective actions with the help of the operational personnel.

FALCON …

Column Base Plate Under Eccentric Loading, Ja-Pung Sheu

Theses

The understanding of the strength and deformational behavior of column base plates is of paramount importance in the analysis and design of pipe and pressure vessel supports. Both elastic and plastic stress analyses, using ANSYS computer program to simulate the strength and deformation of column base plates anchored over a concrete block with an eccentric load, are presented in this study. The work presented here includes the effects of bolt pretension and prying actions of stressed flexible plates.

The analytical results were benchmarked with the published test data by D.P. Thambiratnam and P. Paramasivam for the maximum longitudinal strain along …

Liquid Crystal Display And Thermal Printer For A Single Board Computer, Shenq Jyi Wang

Theses

This thesis deals with the installation of a LTP451 printer mechanism (LTP) and a Dot Matrix Liquid Crystal Display module (LCD) in a SINGLE BOARD COMPUTER (SBC). The communicative method between SBC and LTP is serial, but that between LCD and SBC is parallel.

Proposed Scheduling Methods For Printed Circuit Board Assembly, Tali Freed, Ezey M. Dar-El, Oded Z. Maimon

Industrial and Manufacturing Engineering

The current practice in the assembly of electronic components on printed circuit boards (PCB's) is serial production, a process characterized by very long set-up times.

However. with the advent of efficient on-line process information, new production control methods are now possible. This paper proposes two new production methods - the Grouped Set-up (GSU) method and the Sequence-Dependent Scheduling (SDS) method, which can significantly reduce set-up times.

It is shown that the GSU always performs better than the SDS method in terms of total production flow (throughput). while the SDS performs better than the GSU method in terms of work-in-process (WIP) …

Periodic Solutions For Three Sedimenting Spheres, Ashok S. Sangani, Russel E. Caflisch, Chjan Lim, Jonathan H. C. Luke

Biomedical and Chemical Engineering - All Scholarship

Exact periodic solutions are found for the relative motion of three spheres sedimenting in a Stokes fluid. Nearby solutions are found to be nearly periodic for a long time. Existence of the exact periodic solutions is proved using the point-particle approximation and symmetry properties of Stokes equations. Numerical simulations for finitie-sized particles are performed using a method of multipole expansions.

Transport Processes In Random Arrays Of Cylinders. Ii. Viscous Flow, Ashok S. Sangani, C. Yao

Biomedical and Chemical Engineering - All Scholarship

A numerical method is developed that takes into account the many-particle interactions in a rigorous manner to determine the effective thermal conductivity Km of a composite medium consisting of parallel circular cylinders of thermal conductivity ak suspended in a matrix of conductivity k. Numerical results for Km are presented for a wide range of a and o, the area fraction of the cylinders, after averaging over several computer-generated random arrays of cylinders. The results obtained via this exact method are compared with those of various approximate analytical methods to assess their utility in predicting Km.

Transport Processes In Random Arrays Of Cylinders. I. Thermal Conduction, Ashok S. Sangani, C. Yao

Biomedical and Chemical Engineering - All Scholarship

A numerical method is developed that takes into account the many particle interactions in a rigorous manner to determine the effective thermal conductivity of Km of a composite medium consisting of parallel circular cylinders of thermal conductivity ak suspended in a matrix of conductivity k. Numerical results for Km are presented for a wide rane of a and o, the area fraction of the cylinders, after averaging over several computer-generated random arrays of cylinders. The results obtained via this exact method are compared with those of various approximate analystical methods to assess their utility in predicting Km.

Radiation Effects On Pmos Devices, Camille G. Bates

Journal of the Microelectronic Engineering Conference

A Cesium—137 gamma radiation source was used to irradiate PMOS capacitors and transistors with doses of 7.50E4, 1.50E5, 3.0E5. The devices were tested for C-V and I-V data before and after irradiation. Results show that all doses created changes in the electrical characteristics, however comparison to literature was I inconclusive.

Boron Solid Source Characterization, Kelly Baycura

Journal of the Microelectronic Engineering Conference

Standard Oil’s BN—975 planar diffusion sources were used to fabricate integrated resistors. Dopant transfer was done in a N2:02:H2 ambient at 975 C. Two methods of removing the crystal defect layer formed at the surface, low temperature oxidation (LTO) and a nitric acid soak, were evaluated. Successful layer removal was achieved with the LTO. The nitric acid soak met with limited success.