Engineering Commons^™

Load And Resistance Factor Design Of Cold-Formed Stainless Steel Statistical Analysis Of Material Properties And Development Of The Lrfd Provisions, Shin-Hua Lin, Wei-Wen Yu, Theodore V. Galambos

CCFSS Library (1939 - present)

INTRODUCTION 1.1 General Remarks The "Allowable Stress Design" method has long been used for the design of steel structures in the United States. 1,2,3 Recently, the probability-based load and resistance factor design (LRFD) criteria have been successfully applied to the structural design of hot-rolled steel shapes and built-up members. 4,5,6 The AISI LRFD Specification is being developed as well for the design of structural members cold-formed from carbon and low alloy steels. 7-17 These design criteria can provide a more uniform degree of structural safety to achieve consistent reliability for different design situations. The probability-based design method is developed on …

Santa Clara Magazine, Volume 31 Number 1, Fall 1988, Santa Clara University

Santa Clara Magazine

12 - MY CHINA YEAR Cathy Morrissey '85 guides us through her year in China, teaching English as a second language in Handan.

19 - IT PAYS TO LET YOUR KID RUN WILD The story of a remarkable relationship between a Japanese firm and Michael Franz '75.

21 - THE REWAK YEARS Alumna-journalist Jeanne Huber describes the way Santa Clara grew during the Rewak administration.

26 - THE DEGNAN WAY How a respected English professor turns undergraduates into professional writers.

Impact Evaluation Of The Louisville-Shively-Jefferson County Traffic Alcohol Programs, Jerry G. Pigman, Kenneth R. Agent, Patricia L. Hardyman, Knowlton W. Johnson, Richard Mccleary

Kentucky Transportation Center Research Report

This report is an evaluation of alcohol enforcement programs conducted by the Louisville, Jefferson County, and Shively police agencies in the Louisville metropolitan area. The following four types of data were collected in order to evaluate the traffic alcohol programs; accident data, arrest and adjudication data, cost-effectiveness, and public opinion data.

Results from the before-and-after comparisons and time-series analysis show alcohol-related accidents decreased significantly during the study period, There was a 34.4 percent reduction in alcohol-related accidents during hours of special enforcement and a 30.4 percent reduction during all hours of the day. Time-series analysis of accident data showed a …

Fatigue Analysis Of The I-75 Bridge Over The Kentucky River At Clays Ferry, Theodore Hopwood Ii, Vishwas G. Oka

Kentucky Transportation Center Research Report

Fatigue analysis was performed on AASHTO category E welded connections on the southbound I 75 bridge over the Kentucky River at Clays Ferry, Kentucky. That analysis was based on the stress-range histogram data provided by Law Engineering of Louisville, Kentucky. That data were obtained from strain gages installed at 6 test locations on the downstream truss.

The fatigue analyses consisted of safe-life and fatigue-crack growth analyses. Safe-life predictions were based on AASHTO fatigue design (SN) curves. To use those curves, equivalent constant-amplitude stresses were derived from the stress histograms. Those stresses and loading frequencies were modified to reflect anticipated increases …

Analysis Of Accident Data In Kentucky (1983-1987), Kenneth R. Agent, Jerry G. Pigman

Kentucky Transportation Center Research Report

Kentucky has a systematic procedure to identify locations that have abnormal rates or numbers of accidents. This procedure utilizes average accident rates and numbers. A primary objective of this study was to determine average accident statistics in Kentucky. An annual safety program for Kentucky, which includes the identification, programming, budgeting, and evaluation of safety projects, is prepared each year. The data presented in this report may be included as the problem identification portion of Kentucky's Annual Highway Safety Plan.

Average and critical accident rates were calculated by highway type for rural and urban highways. A summary of results and recommendations …

1988 Usage Rates And Effectiveness Of Safety Belts And Child Safety Seats In Kentucky, Kenneth R. Agent

Kentucky Transportation Center Research Report

The objective of the survey summarized in this report is to establish 1988 safety belt and child safety seat usage rates in Kentucky to compare to those determined from previous surveys. Also included in this report is an analysis of accident records evaluating the effectiveness of safety belts.

Statewide usage rates in the 19 cities previously surveyed in 1982 through 1986 showed that both driver safety belt usage and child safety seat and safety belt usage increased significantly in 1988 compared to previous years. The statewide usage rate of safety belts by drivers was 20.5 percent in 1988 compared to …

Comments On Proposed Transport Protocols, Anil Bhatia, James Sterbenz, Gurudatta M. Parulkar

All Computer Science and Engineering Research

Over the last few years, a number of research groups have made considerable progress on the design of high speed networks- on the order of a few hundred Mbps to the few Gbps. The emphasis of this work has been on the design of packet switches and on the design of network access protocols. However, this work has not yet addressed the internetworking and transport level issues in the high speed internet. As part of our effort on the design of VHSI model, we considered the appropriateness of recently proposed transport protocols, NETBLT and VMTP, as candidates for the transport …

Irish H & V News

Building Services Engineering

No abstract provided.

Reflectance Of An Absorbing Substrate For Incident Light Of Arbitrary Polarization: Appearance Of A Secondary Maximum At Oblique Incidence, R. M.A. Azzam, A. M. El-Saba

Electrical Engineering Faculty Publications

The reflectance of an absorbing substrate Rθ(ɸ) is considered as a function of the angle of incidence ϕ and an incident polarization parameter θ, where cos²θ and sin²θ give the power fractions of incident radiation that are p-and s-polarized, respectively. Taking GaAs as an example, we find that at certain wavelengths (e.g., 0.248 and 0.620 µm), the R_θ vs ɸ curve becomes oscillatory in a narrow range of θ > 45° with an unexpected secondary maximum appearing at oblique incidence. The extrema of the function R_θ(ɸ) are determined numerically, and their angular …

Variable Angle Of Incidence Spectroscopic Ellipsometric Characterization Of Tio2/Ag/Tio2 Optical Coatings, Kazem Memarzadeh, John A. Woollam, Abe Belkind

Department of Electrical and Computer Engineering: Faculty Publications

Optical constants (3000–8000 Å) and layer thicknesses of TiO₂/Ag/TiO₂ optical coatings are determined using variable angle of incidence spectroscopic ellipsometry. Ellipsometrically determined silver layer thicknesses agree well with those obtained by cross-sectional transmission electron microscopy. Also, spectral characteristics, absent in bulk silver data, are observed in n and k spectra for the thin silver layers. It is suggested that these structures may be caused by plasmon effects from the silver layers.

Development Of A Combined Quantity And Quality Model For Optimal Unsteady Groundwater Management, Richard C. Peralta, J. Solaimanian, C. L. Griffis

Civil and Environmental Engineering Faculty Publications

Presented are alternative techniques for including conservative solute transport within computer models for optimizing groundwater extraction rates. Unsteady two-dimensional flow and dispersed conservative solute transport are assumed. Comparisons are made of the practicality of including modified forms of implicit and explicit finite difference solute transport equations within optimization models. These equations can be calibrated and subsequently used within a MODCON procedure. The MODCON modelling procedure consists of an integrated series of five optimization or simulation modules. The procedure is applicable for either an entire aquifer system or for a subsystem of a larger system. The first module, A, computes physically …

A Structured Light Method For Sensing Alignment During Automated Truss Assembly, Jayesh K. Champaneri

Electrical & Computer Engineering Theses & Dissertations

A new method using structured light is proposed to obtain visual feedback information for aligning two cylindrical beams. For a robotic system employed to perform alignment operations in real time it is essential that the accompanying vision system does not pose a heavy burden on the computing machinery and reduce the overall speed of operation. The method proposed here involves two stripes of light projected on each cylinder. One picture frame is sufficient to completely determine the position of the cylinder in space. An experiment was conducted to demonstrate the principle of this method. Results showed that the errors involved …

An Arrayed Hot-Film Sensor For Detection Of Laminar Boundary-Layer Flow Disturbance Spatial Characteristics, Michael S. Wusk

Mechanical & Aerospace Engineering Theses & Dissertations

An arrayed hot-film sensor has been developed for use in laminar boundary-layer research for the detection of crossflow or Gortler vortices. This sensor has been developed to detect spatial variations in heat transfer and velocity perturbations which are characteristic of crossflow or Gortler vortices. The sensor is ultimately intended for flight research applications. This thesis describes the sensor, its principles of operation, signal analysis techniques, and experimental results illustrating the spatial detection capabilities of this specialized hot-film device. Discretely placed spheres placed in the boundary layer created alternating regions of undisturbed and disturbed laminar flow over a prototype sensor. Flow …

Learning System, Bhavesh T. Adani

Theses

Many rule-based learning systems have been implemented which generate and update rules/facts from illustrative examples provided by the user. But very few of them have succeeded in achieving the efficiency and accuracy of an ideal system.

The approach made here is to continuously update the hierarchical structure of rules/facts of a knowledge-base so that efficient and accurate solutions to any query can be achieved easily and immediately from the many possible solutions to the query. As the rule-based systems deal with a very large knowledge-base, it is sometimes necessary to apply a learning technique that finds optimum solutions efficiently.

The …

An Intelligent Computerized Pulse-Duplicator For The In-Vitro Evaluation Of Prosthetic Heart Valves, John F. Andrews

Theses

A computerized data acquisition system is presented for the in-vitro determination of the hydrodynamic performance of prosthetic heart valves. High speed data acquisition and ensemble averaging techniques are employed to minimize error and provide a standard for data collection and analysis across a wide range of simulated physiologic conditions. Processing algorithms automatically divide the cardiac cycle into phases based on landmarks in the pressure and flow waveforms, with minimal variability and without operator intervention. The contributions of valve resistance, regurgitation, ejection, leakage, and power loss to hydrodynamic performance are isolated for investigation. Phasic power loss analysis is reviewed as a …

Waveform Analysis And Application To A Model Of The Egg Waveform, Eu-Rune Chang

Theses

The purpose of thesis is to describe and investigate a model of electroglottogram waveform. At the beginning, we generate a set of sine waveform models to analyze by using Fourier transform theory. Then, according to the electroglottogram is conjectured to be related to the area contact between the vocal folds, we assume a simple model of vocal fold vibratory motion is used to estimate the vocal fold contact area as function of time. Therefore, we modified and developed the mathematic EGG waveform model by using personal computer program computation to become a set of realistic EGG waveform models, which are …

Optimal Cache Size In Microprocessor-Based Multiprogramming System, Charalambos Stephanou Christou

Theses

The Motorola 68020 microprocessor, its paged memory management unit MC68851 and cache memories are rigorously studied. The simulation model of this uniprocessor, multiprogramming system was constructed and tested to determine the optimal physical cache size.

The parameters varied in the model are the cache size, the degree of multitasking, the loop count and size, the cache algorithm and the time slice given to every task. A number of simulations have been conducted and the results are examined.

Development Of A Rock Model Testing Capability At The New Jersey Institute Of Technology And Testing Of Plane Stress Models Possessing A Central Circular Opening With A Nearby Horizontal Discontinuity, David R. Good

Theses

This thesis had three main objectives. They were to develop a rock model testing capability at N.J.I.T. by (1) developing and building a load testing frame for rock models, including all necessary appurtenances and load measuring devices, (2) developing a rock modelling material and quantifying its properties, and (3) applying the capabilities described in items 1 and 2.

A high capacity load test frame was constructed from structural steel members. Heavy screw rams were utilized to apply load and specially constructed proving rings were employed to accurately measure load. Additionally, load platens and other support equipment were constructed.

The model …

Computerized Analysis Of Gastrointestinal Spike Burst Activity, Karthik Krishnan

Theses

This thesis describes a computer algorithm for locating gastrointestinal spike bursts. The algorithm also finds the the number of spikes within each spike burst, the average duration, and average amplitude of each spike burst. The algorithm was applied to the automation of the analysis of the Migrating Colonic Complex.

The algorithm detects the spike burst using threshold, time interval and frequency criteria. The computer program is implemented on a PDP 11/73 digital computer. The operation of the algorithm was tested on animal models to detect the spike bursts, before and after the inducement of certain drugs to alter the colonic …

Finite Element Method In Turbo Pascal, Tingwang Kuo

Theses

A finite element program FEM2D in FORTRAN language by J.N. Reddy has been translated into TURBO PASCAL and several features such as interactive input, mesh generation for a rectangular plate with a circular hole at the center of the plate and graphical display of the meshes and node numbers have been implemented. Four examples including potential flow and plane stress problems have been tested successfully. It is concluded that the PASCAL language on a microcomputer can he used to write a finite element program and is easier to give graphical display than FORTRAN language. The maximal number of nodes that …

Kalman Filtering Applied To The Analysis Of Brainstem Auditory Evoked Potentials, Chong An Qian

Theses

The objective of this thesis is to detect the Brainstem Auditory Evoked Response (BAER) using lower numbers of averages than at present, by using an optimal smoothing method which is based on the Kalman Filter.

By using this method, the wave V latency of the BAER which is useful in testing for hearing loss can be detected with as low as 500 averages, while the traditional signal averaging method requires at least 2000 averages. Thus the time required for a hearing loss test can be reduced from one hour to approximately 20 minutes.

Also several other methods for detecting BAER …

Formation Of Light Hydrocarbons And Soot In The Pyrolysis Reactions Of Chloro, Dichlorobenzene, Acetylene And Benzene In An Atmosphere Of Hydrogen, Larry Jiyuan Zhu

Theses

The kinetics of thermal decomposition of chlorobenzene and dichlorobenzene in a hydrogen and helium atmosphere were further studied to investigate formation of soot and light hydrocarbons. The experiments were performed at atmosphere pressure with residence times rangeing from 0.2 to 1.2 seconds, and the temperature ranges of 850°C to 925°C for chlorobenzene and 870°C to 910°C for dichlorobenzene. Flame ionization detectors, which were connected to GC columns, were utilized for the qualitative and quantitative analysis of the reaction products. A methyl silicone capillary column was used analyzing of heavy aromatics and a Carbosive G was used to analyze light hydrocarbons. …

High-Energy, Curable Polycyclopentadiene Binder For Solid Rocket Propellants, Jian Guo Ning

Theses

Diels Alder polymerization of cyclopentadiene ( CPD ) has been carried out at 170°C under inert atmosphere. The resulted polymer has a low bulk viscosity, 7.4 cps, and a number average molecular weight M_n up to 3000. This liquid Prepolymer is curable with maleic anhydride. With ammonium perchlorate, aluminum, and maleic anhydride, a high energy solid propellant has been formulated with this polymer. Via bomb calorimeter, Instron, and density measurement, it was found that this propellant has a better heat of combustion, tensile strength, and solid loading than that of the commercial rocket propellant based on hydroxyl terminated polybutadiene.

Determination Of Aromatic Amines By Diazonium Salt, Hong-Hue Hsu

Theses

There are many analytical methods used in the identification of aniline by the production of various colors upon treatment with certain reagents. In this work a new inexpensive, easy and sensitive methods to quantitate aniline is developed. The change of absorbance is large enough to measure with a difference of only 1 ppm in the aniline concentration.

In this method, the reagent (2,4-dinitrodiazonium sulphate) which reacts with aniline produces a yellow color. Formation of this color (which absorbs at 486 nm) indicates the presence of aniline. The amount of aniline can be determined by measuring the absorbance at 486 nm. …

Computer Analysis Of The Electrocardiogram Using Hardware Digital Signal Processing, Mohammad Ashfaque Shaikh

Theses

A system based on the microcomputer IBM PC-AT has been realized to acquire and filter the clinical electrocardiogram (ECG) data in real time. The system program further detects and analyzes the ECG signals for possible cardiac arrhythmias.

This research is based on work done by previous researchers and achieves significant goals towards achieving on-line arrhythmia detection using a microcomputer. The system uses the hardware and software package ASPI 320/PC from Atlanta Signal Processors Inc. This hardware configuration uses a special purpose instrumentation microprocessor ( TMS32010 from Texas Instruments) to coprocess the ECG signals. Coprocessing the signals with the ASPI 320/PC …

Development Of A Knowledge-Based System For Human Error Analysis, Bang-Chiang Sung

Theses

Human Factors is one of several essential issues in a discussion of system productivity. Its consideration must be included in the design, development, operation, and maintenance of any human-machine system. In order to maximize the system productivity, humans must perform with their maximum possible efficiency. To achieve this, all human-related activities must be evaluated to determine their possible causes of errors and the consequences. Then, if unable to completely remove, the causes of human errors must be minimized.

This thesis integrates a knowledge of expert system into an analysis of human errors. Its objective is to develop a knowledge-based system …

A Study On The Poly(Ethylene Terephthalate)/Flouropolymer Blends, Chyan-Nin Chiu

Theses

The rate of crystallization of Polyethylene terephthalate) (PET) can be improved by blending it with polyethylene co chlorotrifluoroethylene) (ECTFE; tradename Halar) so that it can be suitable for injection molding. The special advantage of this method is that molecular weight of the blend will not decrease so much as by adding nucleating agents. That is to say, the mechanical strength of the blend will not decrease very much compared with that of virgin PET.

Analysis And Design Of A Surface Microengineered Silicon Humidity Sensor, Uei-Yanq Chen

Theses

This thesis details the design for a solid-state humidity sensor which utilizes state-of-the-art silicon technology. The sensor design utilizes a microengineered surface which includes a polysilicon airbridge structure as heater and sensor element in an integrated device.The operation of this device depends upon the small variation of thermal convection coefficient which effects the temperature of the heated element within the device. The temperature of the polysilicon bridge is monitored by means of a resistance bridge. In one design(sensor I) a single polysilicon airbridge is used for both the heater and resistance sensing element. Also a second inferior design (sensor II) …

The Strategic Planning Dilemma In American Manufacturing, James Andrew Kiray

Theses

The decline of American manufacturing competitiveness is a highly publicized and controversial issue. This publicity has led to a panacea of solutions being offered to this problem. As a result, many conflicting viewpoints have emerged, which have aided in making any solution to this problem extremely difficult. Top executives have been inundated with recommendations for change, causing confusion at all levels of management.

In an effort to define the underlying problems existing within the American strategic planning process, this author has selected current literature which supports his own views, and has expended upon these views.

Once these underlying problems are …

Development Of A Novel Dentin Bonding Agent And Testing For Mechanical Properties, Mircroleakage And Toxicity, Sanjay V. Odak

Theses

In this study a dentin bonding agent based on Tolylene diisocyanatc with o chlorophenol as a blocking agent was tested. Bond strength with dentin was determined using a clinically relevant test method. A comparison was made using commercially available bonding agents and restorative resins. A simulation of microleakage around restorations was performed using a "Silver staining technique". Microleakage was quantified using digital image analysis, and a method was proposed to compensate for the loss of the third dimension during image analysis. Layer-by-layer curing of restorative, and an acid etching technique was used to improve bonding to dentin. The oral LD50 …