Engineering Commons^™

An Improved Scheduling Algorithm For Eglin Afb Test Ranges, Jeffrey S. Antes

Theses and Dissertations

This research develops an algorithm that integrates into an existing computerized scheduling system to improve the mission scheduling function for Eglin AFB test ranges. The primary objective of this research was to design an improved computerized scheduling aid. The measure of performance for this approach is the number of missions scheduled using this aid as compared to current Eglin capabilities. Constructive heuristics are used in the algorithm to schedule missions according to critical resource groups while ensuring mission priority is not violated. The success of this new interactive scheduling algorithm is measured against a schedule produced by the current computer …

Gettysburg: An Analysis Of The Training Value Of Commercial Models, Jude C. Fernan

Theses and Dissertations

This study investigated the possibilities of using commercial combat models/war games dealing with the battle of Gettysburg as aids for the training of soldiers and leaders in the military. With the downsizing of the military and the high cost of training, there exists a need to reduce training costs while not affecting the quality of training. The military employs various military models to assist in training but has yet to fully tap the wealth of commercial combat models. One reason may be the lack of an investigative analysis into the soundness and applicability of commercial combat models to military training. …

A Decision-Theoretic Approach To Recommending Action In The Air-To- Ground Aircraft Of The Future, Garrison H. Flemings

Theses and Dissertations

Designers of air-to-ground fighters of the future should consider including decision support systems to relieve pilots of some of the present workload. Those decision support systems should use utility theory. This work reviews two techniques of utility theory (decision trees and influence diagrams) and a new technique due to Morlan (probability ratio nets). The work includes a proposed structure for action recommendation systems in air-to-ground fighters of the future. The work describes an implementation of probability ratio nets. The work demonstrates the value of decision theory to air-to-ground fighters of the future by way of solving an example problem and …

Saber: Airland Combat Training Model Credibility Assessment And Methodology, David L. Scagliola

Theses and Dissertations

Saber is a theater-level, airland combat training model, designed by a number of computer science and engineering students and faculty at the Air Force Institute of Technology (AFIT). Saber is intended to replace the Agile model, which is currently used at the Air Force Wargaming Center, Maxwell AFB, Alabama for Theater Warfare Exercise (TWX) training purposes. This thesis focuses on the progress made towards generating the Saber training model, its ability to meet the objectives specified by the Wargaming Center, and its ability to represent actual combat. Specifically, this thesis is directed towards characterizing, establishing a credibility assessment, and developing …

A Response Surface Methodology Study Of Ferroelectric Memory Devices, Kevin C. Smith

Theses and Dissertations

Fatigue in ferroelectric memory devices was studied. The application of fatigue pulses to a ferroelectric sample was controlled by the RT-66 Ferroelectric Tester, a variation of the Sawyer-Tower circuit. The RT-66 also controlled data collection following the fatiguing process. Seven variables were evaluated for their potential- affect on fatigue. A sequence of fatigue tests, which varied the settings of these variables, was developed using Response Surface Methodology (RSM) experimental designs. Least-squares regression models were developed once a particular RSM set of design experiments was completed. These models were evaluated using RSM tools, and the analysis of these models allowed the …

Development Of A Stratified Plate Model For Composite Panels, Alan L. Lesmerises

Theses and Dissertations

A new model for composites represents a composite panel as an alternating stack of isotropic matrix and orthotropic fiber-dominated layers. An energy approach results in a set of partial differential equations and boundary conditions where the mechanical properties of the matrix and fibers appear separately. Two solution methods are developed. The first, called Strata Theory is developed for general applications, while the second, called the Exact Stratified Plate, is used as a benchmark for comparison to Strata Theory. Both solutions assume zero gradients of displacement through the thickness of a fiber layer. They are compared for an isotropic material and …

Boolean Reasoning And Informed Search In The Minimization Of Logic Circuits, James J. Kainec

Theses and Dissertations

The minimization of logic circuits has been an important area of research for more than a half century. The approaches taken in this field, however, have for the most part been ad hoc. Boolean techniques have been employed to manipulate formulas, but not to perform symbolic reasoning. Boolean equations are employed principally as icons; they are never solved. The first objective of this dissertation is to apply Boolean reasoning systematically and uniformly to the minimization problem. Boolean reasoning entails the reduction of systems of Boolean equations to a single equation; the single equation is an abstraction, independent of the form …

Experimental Feedback Of Fractional Order States Of A Lightly Damped Structure, Robert C. Mccall

Theses and Dissertations

The purpose of this study was to investigate the effectiveness of using fractional order time derivatives of position feedback signals in the active control of vibration. To that end, circuitry was built and evaluated that finds the half order derivative of an input signal. The magnitude responses of the fractional derivative circuits is very good, but there are large phase shifts present that may degrade the performance of the controllers. Two methods of incorporating the fractional derivative signals into the controller were examined. One method involved developing a similarity transformation that transforms an integer order state controller into an equivalent …

Hardware-Verification Through Logic Extraction, Michael A. Dukes

Theses and Dissertations

A Prolog-based system is described which employs logic-extraction to perform hardware-verification. The extraction rules are built automatically from hierarchical structural VHDL models, enabling the equivalence of a structural VHDL description and a layout specification to be verified. Pin-to-pin critical- path analysis is performed within the logic-extraction process; many noncritical paths are pruned early, making pin-to-pin critical path analysis of large circuits feasible. It is demonstrated that a design methodology based on logic extraction, VHDL, and a layout tool can provide a fabricated functionally- correct IC design without circuit-level or switch-level simulation. This methodology is shown to be practical for VLSI …

Kentucky Rock Asphalt (Kyrock) Road Surfacing Material: Preliminary Investigation, Jerry G. Rose

Kentucky Transportation Center Research Report

This report documents a preliminary investigation of Kentucky Rock Asphalt (Kyrock) - as a road surfacing material. The indigenous bituminous impregnated sandstone was widely used as a premium quality skid resistant surfacing material during the first half of this century. Redevelopment efforts gained momentum during the 1960's, but for the last twenty years interest has waned.

Laboratory tests were conducted on the Kyrock to determine its applicability in bituminous surface mixes by blending Kyrock with virgin materials in a similar manner as adding recycled asphalt pavement. The findings indicated it was feasible to blend Kyrock and a continuation proposal was …

An A Priori Multiobjective Optimization Model Of A Search And Rescue Network, Joseph C. Imsand Jr.

Theses and Dissertations

The purpose of this study was to determine the most robust frequency assignment for a search and rescue network. The focus was to assign weights to the transmitter areas of the network to determine which weight sequence produced the most robust frequency assignment. The DoD furnished weight sequences for twelve two-hour time blocks. These weight sequences were compared to a weight sequence with all weights having equal value. Network and linear programming were used to-solve this problem and generate frequency assignments for all weight sequences. Classical and tolerance sensitivity analysis were used to analyze the frequency assignments generated by the …

Finding A Maximum-Density Planar Subset Of A Set Of Nets In A Channel, Ronald I. Greenberg, Jau-Der Shih

Computer Science: Faculty Publications and Other Works

We present efficient algorithms to find a maximum-density planar subset of n 2-pin nets in a channel. The simplest approach is to make repeated usage of Supowit's dynamic programming algorithm for finding a maximum-size planar subset, which leads to O(n^3) time to find a maximum-density planar subset. But we also provide an algorithm whose running time is dependent on other problem parameters and is often more efficient. A simple bound on the running time of this algorithm is O(nlgn+n(t+1)w), where t is the number of two-sided nets, and w is the number of nets in the output. Though the worst-case …

Network Analysis Of Intermediary Metabolism Using Linear Optimization. I. Development Of Mathematical Formalism, Joanne M. (Savinell) Belovich, Bernhard O. Palsson

Chemical & Biomedical Engineering Faculty Publications

Analysis of metabolic networks using linear optimization theory allows one to quantify and understand the limitations imposed on the cell by its metabolic stoichiometry, and to understand how the flux through each pathway influences the overall behavior of metabolism. A stoichiometric matrix accounting for the major pathways involved in energy and mass transformations in the cell was used in our analysis. The auxiliary parameters of linear optimization, the so-called shadow prices, identify the intermediates and cofactors that cause the growth to be limited on each nutrient. This formalism was used to examine how well the cell balances its needs for …

Network Analysis Of Intermediary Metabolism Using Linear Optimization. Ii. Interpretation Of Hybridoma Cell Metabolism, Joanne M. Savinell (Belovich), Bernhard O. Palsson

Chemical & Biomedical Engineering Faculty Publications

Analysis of metabolic networks using linear optimization theory allows one to quantify and understand the limitations imposed on the cell by its metabolic stoichiometry, and to understand how the flux through each pathway influences the overall behavior of metabolism. A stoichiometric matrix accounting for the major pathways involved in energy and mass transformations in the cell was used in our analysis. The auxiliary parameters of linear optimization, the so-called shadow prices, identify the intermediates and cofactors that cause the growth to be limited on each nutrient. This formalism was used to examine how well the cell balances its needs for …

Improved I/O Pad Positions Assignment Algorithm For Sea-Of-Gates Placement, Shyang-Kuen Her

Dissertations and Theses

A new heuristic method to improve the I/O pad assignment for the sea-of-gates placement algorithm "PROUD" is proposed. In PROUD, the preplaced I/O pads are used as the boundary conditions in solving sparse linear equations to obtain the optimal module placement. Due to the total wire length determined by the module positions is the strong function of the preplaced I/O pad positions, the optimization of the I/O pad circular order and their assignment to the physical locations on the chip are attempted in the thesis. The proposed I/O pad assignment program is used as a predecessor of PROUD. The results …

Hypoid Gear Optimization, Selvaraj Ramachandran

Dissertations and Theses

A hypoid gear optimization procedure using the method of feasible directions has been developed. The objective is to reduce the gear set weight with bending strength, contact strength and facewidth-diametral pitch ratio as constraints. The objective function weight, is calculated from the geometric approximation of the volume of the gear and pinion. The design variables selected are number of gear teeth, diametral pitch, and facewidth. The input parameters for starting the initial design phase are power to be transmitted, speed, gear ratio, type of application, mounting condition, type of loading, and the material to be used. In the initial design …

An Intelligent Database For Psubot, An Autonomous Wheelchair, Dieudonne Mayi

Dissertations and Theses

In the design of autonomous mobile robots, databases have been used mainly to store information on the environment in which the device is to operate. For most of the models and ready systems, the database when used, is not a stand alone component in the system, rather it is only intended to keep static information on the disposition and properties of objects on the map.

In this thesis is implemented an intelligent database. It combines static facts to build more information. An intelligent database such as this one will be a plus for an intended autonomous machine such as the …

Test Methods For Mechanically Fastened Cold-Formed Steel Connections, Committee On Specifications For The Design Of Cold-Formed Steel Structural Members

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

No abstract provided.

Ccfss Technical Bulletin February 1992, Wei-Wen Yu Center For Cold-Formed Steel Structures

CCFSS Technical Bulletins (1993 - 2020)

No abstract provided.

Acuta Enews February 1992, Vol. 21, No. 2

ACUTA Newsletters

In This Issue

Call for RD Nominations

President's column

Workshop announcement

Alabama college takes case to PSC

Party Line

Rating to Tucson seminars

Effect Of Co2 On The Processing Of Y-Ba-Cu-O Superconductors, C. Zhang, Guna S. Selvaduray

Faculty Publications

The superconducting properties of YBa2Cu3O6+x reacted with various known ratios of O2/CO2 gas mixtures during sintering at different temperatures were studied. Jc was found to decrease drastically upon reaction with CO2, becoming zero at certain CO2 activities. The stability region for the 123 superconductor, as a function of CO2 activity and temperature, was empirically formulated as follows: log pCO2 < (−45,000)/T + 33.4. The grain boundaries in sintered samples with Jc = 0 were investigated with HRTEM in conjunction with EDS. Two distinct types of grain boundaries were observed. Approximately 10% of the grain boundaries were wet by a thin layer of a second phase, deduced to be BaCuO2. The remaining boundaries were sharp grain boundaries. The grain structure near the sharp grain boundaries was tetragonal. These two types of grain boundaries are thought to be responsible for Jc being zero.

The Calendar - February 1992, Nova University

The Calendar

No abstract provided.

Model-Based Target Recognition Using Laser Radar Imagery, Robert Y. Li

Department of Electrical and Computer Engineering: Faculty Publications

Autonomous target recognition can be assisted by using CO2 laser radar data. Of these data, range data provide 3-D geometric information and Doppler data boundaries of moving targets. A powerful 3-D feature extraction algorithm based on the Hough transform is used to obtain the orientations and dimensions of the target. This information is then utilized by an inference procedure that recognizes targets based on the available evidence from the sensory data. The experimental results using actual laser radar imagery are successful and the procedure can be used for the future development of a model-based system for target recognition.

Wright State University College Of Engineering And Computer Science Bits And Pcs Newsletter, Volume 8, Number 2, February 1992, College Of Engineering And Computer Science, Wright State University

BITs and PCs Newsletter

An eight page newsletter created by the Wright State University College of Engineering and Computer Science that addresses the current affairs of the college.

An Application Of The Finite Element Method In Forging, Hazim Atef El Mounayri

Archived Theses and Dissertations

No abstract provided.

Ccfss News February 1992, Wei-Wen Yu Center For Cold-Formed Steel Structures

CCFSS Newsletters (1999 - 2008)

No abstract provided.

Icosahedral Phase Stabilities In Al-Cu-Ru Alloys, Jeffrey E. Shield, C. Hoppe, R.W. Mccallum, A.I. Goldman, K.F. Kelton, P.C. Gibbons

Nebraska Center for Materials and Nanoscience: Faculty Publications

By examining a wide region of the Al-Cu-Ru phase diagram, a thorough analysis of the compositional and thermal stability of the icosahedral phase has been completed. The primary solidification product of rapid solidification was a topologically and chemically disordered icosahedral phase with an extensive compositional region. Crystallization through exothermic events of the as-solidified materials produced crystalline phases, without the formation of the face-centered-icosahedral (FCI) phase. However, the FCI phase does form at higher temperatures through an endothermic reaction, indicating that it is a stable phase of the system, but only at elevated temperatures. Of the alloys studied, the FCI phase …

Darcy-Weisbach Roughness Coefficients For Gravel And Cobble Surfaces, John E. Gilley, Eugene R. Kottwitz, Gary A. Wieman

Department of Agricultural and Biological Systems Engineering: Faculty Publications

A laboratory study is conducted to measure Darcy-Weisbach roughness coefficients for selected gravel and cobble materials. Varying rates of flow are introduced into a flume in which a given size class of gravel or cobble material is securely attached. Roughness coefficients are calculated from measurements of discharge rate and flow velocity. The laboratory data are used to develop regression equations for relating roughness coefficients to surface cover and Reynolds number. The regression relations, which are developed for values of the Reynolds number from approximately 500 to 16,000, are tested using hydraulic data collected on surfaces containing a distribution of size …

Transient Stability Test Systems For Direct Stability Methods, V. Vittal, D Martin, R Chu, J Fish, J C. Giri, C K. Tang, F. Eugenio Villaseca, R G. Farmer

Electrical and Computer Engineering Faculty Publications

A standard set of power system data with benchmark results are presented against which direct stability techniques to assess transient stability can be compared and tested. The test systems have been selected to display a wide range of dynamic characteristics to provide a robust test of the efficacy and accuracy of the various analytical techniques to analyze transient stability. Transient stability test system data and benchmark results obtained from two commercially available time-domain stability analysis packages are presented

A Computer Based Educational Aid For The Instruction Of Combat Modeling, Richard S. Moore

Theses and Dissertations

The Air Force Institute of Technology is one of few institutions that teaches combat modeling. Combat models are typically dynamic computer simulations of specialized dynamic processes. Great difficulty exists in portraying these dynamic and recurrent processes with conventional static diagrams. This thesis produced a computer-based instructional aid which presents animated examples of processes common to combat models, demonstrates a simple few-on-few aerial combat model, and encourages student exploration and interaction with these presentations. This aid provides dynamic examples of random number generation, detection processes, target selection, and target destruction. A complete combat model demonstrating a few-on-few air duel is animated …