Engineering Commons^™

Santa Clara Magazine, Volume 34 Number 3, Spring 1992, Santa Clara University

Santa Clara Magazine

12 - EAST L.A. STORY Jesuit-run Dolores Mission Alternative School is a last chance for East L.A.'s troubled teen-agers, many of whom are members of violent Latino gangs. By Rene Romo '86

20 - ONE IS TOO MANY TWO ARE NOT ENOUGH A personal account of one woman's struggle with alcohol addiction. By Lisa Agrimonti '87

24 - UP CLOSE: WITOLD KRASSOWSKI After five years in the Polish Underground Army during WW II, the founder of SCU's Sociology Department came to America and discovered teaching. His 40-year commitment to students has never waivered. By Christine Spielberger '69

28 - WORKING …

Suppression Of Multiple Pulse Formation In External-Cavity Mode-Locked Semiconductor Lasers Using Intrawaveguide Saturable Absorbers, Dennis J. Derickson, R. J. Helkey, A. Mar, Judy R. Karin, J. E. Bowers, R. L. Thornton

Electrical Engineering

Imperfect antireflection coatings in external-cavity mode-locked semiconductor lasers can cause multiple output pulse generation. The incorporation of an intrawaveguide saturable absorber segment into the laser suppresses this problem. Single pulse outputs of less than 2.8 ps and 0.7 pJ of energy are obtained using such devices with both quantum well and bulk active regions

Ole Miss Engineer 1992

Ole Miss Engineer

No abstract provided.

Spring 1992, Wmpg 90.9 Fm

WMPG Program Guides

WMPG program guide for Spring 1992

Includes notes from Program Director, information on shows and events, and schedule.

Bulletin - Spring, 1992, Civil Aviation Medical Association

Browse all Civil Aviation Medical Association Newsletters

A twelve page newsletter of the Civil Aviation Medical Association. The newsletter provided news about civil aviation medicine and information related to the organization.

Effect Of Intruder Vertical Rate On Pilot Perception Of Separation On A Cockpit Traffic Display, Bryan H. Rooney

Master's Theses - Daytona Beach

The purpose of this study was to determine the effect of intruder vertical rate on pilots’ perception of aircraft separation as viewed on a cockpit traffic display. A group of 20 student pilots from Embry-Riddle Aeronautical University participated as subjects. SuperCard® software and a Macintosh II® personal computer were employed to generate the simulation of a cockpit display of traffic information. Each pilot monitored 84 scenarios in which they had to perceive how far away a single intruder would pass over or under their own aircraft. The pilots’ decision time, vertical and horizontal distance at decision time and percentage of …

A General Three Dimensional All Quadrilateral Surface Mesh Generation Algorithm, Roger Cass

Theses and Dissertations

Among the available all-quadrilateral mesh generation algorithms progressive-front offers the best quality and robustness. The paving algorithm is a progressive-front technique that generates a two dimensional mesh of all quadrilaterals on planar surfaces. The technique is particularly suited to meshing irregular boundaries with interior holes. This thesis presents an extension of the paving algorithm to generalized three dimensional surfaces. The major problems in three-dimensional surface mesh generation are projection of nodes, calculation of interior angles, and connection of mesh fronts. The solutions to these problems are presented. This work is part of the ongoing CUBIT project at Sandia Labs. The …

Determination Of The Parameter Limits For Artificial Non-Random Microwave Signal Detection, Irvin Lee Burough

Master's Theses - Daytona Beach

The Doppler shift of small bandwidth (several Hertz) microwave signals makes identification of spectral features difficult; the Doppler individual bandwidth shift can be a factor of hundreds or thousands of times greater than the bandwidth. A computer model supplied by the National Aeronautics and Space Administration's (NASA) Search for Extra-Terrestrial Intelligence (SETI) project, which can simulate radio frequency interference (RFI) and a buried ETI signal, will determine the limits of the signal-to-noise ratio (SNR) and false alarm threshold for identification of the signal after Doppler shifting. By running the model on a MicroVAX II computer, it will be possible to …

The Calendar - April 1992, Nova University

The Calendar

No abstract provided.

Using Computerized Cinematography To Develop A Predictive Model Relating Muscle Stress And Wrist Movement, Joseph M. Kaczmar

Honors Theses

Workers in many jobs are required to perform the same tasks day after day. As a result of this repetitious work, many employees are developing what is know as Cumulative Trauma Disorders (CTD). There has been much research done on ways to prevent these disorders. Cumulative Trauma Disorders involving the wrist are of special concern. Repetitive motions and awkward positions of the wrist are a major cause of CTD's in the wrist. One such factor dealing with the posture is the angle between the hand and the forearm. In order to help limit the affects of CTD's of the wrist, …

Computational Simulation Of Flow Through Elbows In The Approach Piping Systems To A Headbox, Kasinathan Ramanathan

Masters Theses

The successful operation of the wet end in a paper machine is highly dependent on the approach piping system. Sheet basis weight stability and ease of making wet end adjustments are greatly impaired by improperly designed approach piping systems. Most problems in headbox approach piping occur when the flow splits, combines, and passes through elbows.

Elbows create cross flows, flow separation, and eddies, and play an important role in the uniform and stable delivery of the pulp into the headbox. The effect due to an elbow lasts for a considerable distance downstream of the elbow and is severe when two …

Optimization Of Sodium Carbonate-Sodium Hydroxide Pulping Of Wheat Straw For Corrugating Medium Production, Irmak Yayin

Masters Theses

This study's primary objective was to present sodium carbonate pulping as an alternative to soda or lime pulping of wheat straw for corrugating medium production. If sodium carbonate pulping is comparable with soda pulping in terms of strength properties, it could be the preference of choice because the recovery of sodium carbonate is simpler requiring less capital investment. The two strength properties that were optimized with respect to total chemical charge, cooking time, and sodium hydroxide fraction in the cooking liquor were Concora crush resistance and STFI compressive strength. These are the two most important strength properties for the end …

The Indentation Of Foam Pattern Surfaces By Coordinate Measuring Machine Probes, Sanjay Nenawati

Masters Theses

When coordinate measuring machines are used to measure the complex shapes of foam patterns, the spherical probe tips indent into the soft surface of the pattern. Such indentation represents a measurement error since the indicated dimension will not be the same as the actual dimension. To determine the magnitude of error, the depth of probe tip indentation into PMMA and EPS foam surface (i.e., elastic indentation) was measured as a function of time, applied load, and foam density. The residual indentation after the removal of the load (i.e., plastic indentation) was also studied.

The depth of elastic indentation increased with …

Simplified Sizing Procedure For Solar Domestic Hot Water Systems, Florida Solar Energy Center, Public Information Office

FSEC Energy Research Center®

This procedure was developed to size residential solar water heating systems in Florida.

On Planar Routing Of Multi-Terminal Nets In Vlsi Physical Design, Jahangir A. Hashmi

Masters Theses

In this thesis, we study two problems related to the physical design of VLSI circuits. One problem is related to the VLSI global routing and the other is related to the detailed routing in a bounded region.

We consider the routing of multiple multi-terminal nets on a single layer. We suggest a new approach for this problem. Our approach is based on simultaneously finding a forest of k non-intersecting spanning trees. We present an O(n^3) algorithm for finding two spanning trees corresponding to two nets on a single layer.

We also study the problem of finding a minimum Steiner tree …

A Study Of Numerical Integration Techniques For Use In The Companion Circult Method Of Transient Circuit Analysis, Charles A. Thompson

Department of Electrical and Computer Engineering Technical Reports

Circuit transient analysis packages such as SPICE and EMTP are very widely used, but detailed information on the internal structure and error characteristics for these software packages is lacking. Both SPICE and EMTP rely on numerical integration to approximate the transient response of circuit elements. The numerical integration methods used in the packages are not necessarily the most accurate approximations to the actual response of a circuit. The study of these numerical integration methods and their error characteristics is the focus of this thesis. Comparisons are made between several methods in terms of accuracy and stability as well as algorithm …

Unsteady Euler And Navier-Stokes Computations Around Oscillating Delta Wing Including Dynamics, Ahmed Abd-El-Bar Ahmed Salman

Mechanical & Aerospace Engineering Theses & Dissertations

Unsteady flows around rigid or flexible delta wings with and without oscillating leading-edge flaps are considered. These unsteady flow problems are categorized under two classes of problems. In the first class, the wing motion is prescribed a priori and in the second class, the wing motion is obtained as a part of the solution. The formulation of the first class includes either the unsteady Euler or unsteady Navier-Stokes equations for the fluid dynamics and the unsteady linearized Navier-displacement (ND) equations for the grid deformation.

The problem of unsteady transonic flow past a bicircular-arc airfoil undergoing prescribed thickening-thinning oscillation is studied …

Transfer Function Models And Control Of A Flexible Structure Using Piezoelectric Laminates, Joseph A. Colvin

Mechanical & Aerospace Engineering Theses & Dissertations

The development of piezoelectric polymer films has generated a great deal of excitement in the structural controls community because they are lightweight, durable, distributed in nature and have broad band frequency characteristics. The flurry of research inspired by piezoelectric films has primarily been dedicated to using them as distributed sensors, and to a lesser extent, as distributed actuators.

Active damping of structural vibrations using piezoelectric polymer films as sensors and actuators has primarily been directed toward taking advantage of their distributed nature and employing various types of distributed control theory. This approach does not easily yield insight into the dynamics …

Hierarchical Flux-Based Thermal-Structural Finite Element Analysis Method, Sandra P. Polesky

Mechanical & Aerospace Engineering Theses & Dissertations

A hierarchical flux-based finite element method is developed for both one- and two-dimensional thermal-structural analyses. Derivation of the finite element equations is presented. The resulting finite element matrices associated with the flux-based formulation are evaluated in closed-form. The hierarchical finite elements include additional degrees of freedom in the approximation of the element variable distributions by the use of nodeless variables. The nodeless variables offer increased solution accuracy without the need for defining actual nodes and rediscretizing the finite element model. Thermal and structural responses obtained using the hierarchical flux-based method are compared with results obtained from a conventional linear finite …

Formant Estimation From Dctc's Using A Feedforward Neural Network, Shubhangi U. Kelkar

Electrical & Computer Engineering Theses & Dissertations

Formants are the natural frequencies of the human vocal tract. Existing methods for estimating formants from speech signals are computationally complex and subject to errors for certain type of speech sounds. This thesis describes a method for estimating vowel formant frequencies from Discrete Cosine Transform Coefficients (DCTC's), a form of cepstral coefficients, using a feedforward neural network with back-propagation training. Experimental results are based on a large multispeaker data base. The results are obtained for both a linear transformation and a feedforward neural network with a nonlinear hidden layer. In general, the neural network transformation is superior to the linear …

Development Of A Model Updating Technique For Controls-Structures Integrated Design Optimization, Angela Georges

Mechanical & Aerospace Engineering Theses & Dissertations

A model updating technique is developed with the intent of providing an efficient means of improving the accuracy of the modelling of the vibrational qualities of a large, flexible structure as it undergoes an integrated controls-structures design optimization. The proposed technique utilizes eigenvalue/eigenvector sensitivity information, two different model reduction methods which assign weights of importance to the vibrational modes of the structure, and modal switching based upon the modal weights determined by the model reduction methods. Issues associated with the numerical implementation of the proposed technique, such as discontinuities induced by modal switching, are also addressed.

The proposed model updating …

Modal Analysis Of Gyroscopically Coupled Sound-Structure Interaction Problems, Vijay B. Bokil

Mechanical & Aerospace Engineering Theses & Dissertations

In many practical situations we encounter sound-structure interaction between the fluid in a cavity and the flexible wall on the boundary. The aircraft cabin interacting with its fuselage and double-leaf partition walls interacting with the enclosed cavity are some of the typical examples. The vibratory behavior of the structure and the acoustical pressure inside the cavity are affected by this interaction.

In most of the cases, the governing differential equations for the coupled system can be shown to involve gyroscopic coupling. A special method has been applied to decouple the equations in terms of pairs of generalized coordinates and the …

An Investigation Of Cutting Tool Chatter Vibration In Machine Tools, Arneil Olson

Graduate Research Papers

The purpose of this study was to assemble and condense the research and background literature available on cutting tool chatter vibration. Another requirement was to translate the highly technical language of the researcher into a form readily understandable to shop floor personnel.

Support staff called upon to assist in the elimination of chatter problems have not been given the informational resources necessary to effectively deal with the phenomenon. This information should be gathered from university libraries and cutting tool experts and combined into one basic reference work.

If collecting the references were all that was required they could simply be …

Comparison Of Synchronization Techniques For The Afit Direct Sequence Spread Spectrum System, Edward A. Bednar

Theses and Dissertations

The purpose of this study is to analyze and evaluate the performance of several code synchronization methods that could be used in the Air Force Institute of Technology's (AFIT) Direct-Sequence Spread Spectrum (DSSS) communication system. These methods include the sliding correlator, transmitted reference, sequential estimation, and three types of matched filters. The matched filters are the baseband matched filter, delay line matched filter, and the convolver. The criteria used for the evaluation of these synchronization methods are theoretical synchronization times and probability of bit-error. Advantages and disadvantages of each synchronization method are described and a method is recommended to be …

Strategic Deterrence In The Post-Start Era, David C. Mccormick

Theses and Dissertations

With the Soviet Union's fall there have been widespread calls for drastic reductions in the United States military's strategic nuclear forces. Although a major threat to the United States has been greatly reduced, the number of strategic targets will not decrease as rapidly as the number of available weapons. This research considers how the United States should think about strategic forces in the rapidly changing world order of the 1990s. An extensive literature review of deterrence concepts and conventional weapons capabilities is conducted with special attention paid to the role that precision guided munitions played in the 1991 Persian Gulf …

Inelastic Stability Of Nonproportionally Loaded Steel Sway Beam-Columns And Space Frames, Saleh Ali Eidan

Civil & Environmental Engineering Theses & Dissertations

A comprehensive study of the inelastic stability of steel beam-columns and frames subjected to nonproportional loads is conducted. A set of materially nonlinear differential equations of equilibrium for planar and biaxially loaded beam-columns are first formulated including sidesway. The analysis includes the effect of flexible connections, and initial imperfections in the form of member crookedness and residual stresses. Also, hollow rectangular sections are adopted for the study. First, an iterative numerical solution procedure is formulated for sway beam-columns utilizing central finite-differences with second-order truncation errors. Next, using the beam-column analysis, an inelastic frame analysis procedure is formulated by a conversion …

Eigenvalue Reanalysis Techniques Using Msc/Nastran, Christopher B. Barton

Mechanical & Aerospace Engineering Theses & Dissertations

Reanalysis is a numerical analysis technique that uses results from the total analysis of a design to compute the new response at a reduced computational cost. While there are many techniques available for reanalysis, the first order perturbation technique is investigated in this study. Because of its wide use in industry, NASTRAN finite element analysis software is used for total analysis, and as a basis for error. Since error seems rather unpredictable for this technique, it is sought, in this thesis, to find a reliable index for error so that a designer can know when the technique can be trusted. …

Preliminary Structural Design Of A Lunar Transfer Vehicle Aerobrake, Lance B. Bush

Mechanical & Aerospace Engineering Theses & Dissertations

An aerobrake concept for a Lunar transfer vehicle was weight optimized through the use of the Taguchi design method, structural finite element analyses and structural sizing routines. Six design parameters were chosen to represent the aerobrake structural configuration. The design parameters included honeycomb core thickness, diameter-to-depth ratio, shape, material, number of concentric ring frames, and number of radial frames. Each parameter was assigned three levels. The minimum weight aerobrake configuration resulting from the study was approximately half the weight of the average of all twenty seven experimental configurations. The parameters having the most significant impact on the aerobrake structural weight …

Characterization Of Trailing Line Vortices, Karla M. Mossi

Mechanical & Aerospace Engineering Theses & Dissertations

Mean velocity surveys were taken for axial or trailing line vortices produced behind a bi-wing vortex generator in a low-speed wind tunnel. Data were taken primarily with a seven-hole probe at a speed of 30m/s; but vortex steadiness was studied using smoke flow visualization over a speed range between 10 and 40 m/s. Various generator center body configurations were studied, with particular interest directed toward how a centerline jet and an asymmetric, unsteady circumferential flow influenced the mean velocity profiles. This study found that a centerline jet did not produce a well-behaved two-cell vortex over the parametric range available in …

Materially Nonlinear Finite Element Analyses Of Trusses And Slab-On-Grade Problems, Moayyad Moh'd Al-Nasra

Civil & Environmental Engineering Theses & Dissertations

The overall approach is to employ the finite-element method along with specified material models to account for material nonlinearity. This study includes two different applications: truss structures and slabs-on-grade.

Procedures for materially nonlinear analysis of truss structures, which apply for both determinate and indeterminate cases are proposed. The proposed procedures are simple and can handle a variety of different stress-strain functions, and the applied load does not have to be incremental. Proposed procedures results are verified with the output of NASTRAN.

A finite-element model for slab-on-grade is introduced. The concrete slab is represented by eight-node brick elements, and the joints …