Engineering Commons^™

Aerodynamics Of Solar Vehicles, Richard R. Pardun

Opportunities for Undergraduate Research Experience Program (OURE)

The purpose of this research project is to design the shape of a fully road worthy vehicle operating under nothing but the power of the sun. This vehicle was to meet all racing regulations of The Sunrayce and the World Solar Challenge. Because of the specific use of this vehicle, this project provides a chance to explore the aerodynamically ideal vehicle. Little attention has to be paid to practicality. The result is a very streamlined, highly aerodynamically efficient car, that is still stable and safe.

Analysis Of A Thrust Vectoring Fighter Aircraft Using Realtime Flight Simulation, Clinton A. Thessen

Opportunities for Undergraduate Research Experience Program (OURE)

A real-time flight simulation model based on the McDonnell Douglas F/A-18 Hornet was created. This model was then modified with two different styles of thrust vectoring so that a study of each system's effect on the aircraft's pitch performance could be conducted in order to determine the best system. At present, work is proceeding on the development of active flight controls for the aircraft. After that effort is completed the thrust vectoring study can begin.

Mechanical Properties Of Whisker-Reinforced Cordierite Glass Matrix Composites, John R. Dillingham

Opportunities for Undergraduate Research Experience Program (OURE)

The development of a whisker-reinforced ceramic matrix composite has been shown to be a reasonable method of achieving improved mechanical properties for ceramic materials. In this work a cordierite matrix was reinforced with 20vol% of silicon carbide whiskers. The mechanical properties of this composite were compared to those of the nonreinforced cordierite matrix. As would be expected, the whisker- reinforced matrix showed a significant improvement in mechanical properties.

The specimens used for testing were processed by hot-pressing in an argon atmosphere using a graphite die coated with boron nitride. Hot pressing was carried out at 950°C for the pure matrix …

In-Plane/Out-Of-Plane Dynamic Racking Tests Of Curtain Wall Glass Elements, James H. Culp

Opportunities for Undergraduate Research Experience Program (OURE)

This report describes a research project that was conducted to examine architectural glass behavior as curtain wall components subjected to earthquake-like dynamic motions. The project was an extension of an earlier pilot study conducted in 1991. The 1991 pilot study dealt only with dynamic racking of the curtain wall in its own plane.

The focus of this study was to investigate the effects of adding out-of-plane motions to the previous in-plane motions and to observe the resulting structural performance of various types of architectural glass. Thus, the curtain wall specimens in the current study were racked with motion components both …

Behavior Of Bubble Columns, Clint Davison

Opportunities for Undergraduate Research Experience Program (OURE)

In the research program I studied different methods used in mixing gas and liquid in industrial reactors. I was introduced to the bubble column, the airlift reactor, and the bubbling stir tank through text reading, experimentation, and designing. From readings coming from the instrument and observation with my own eyes, I was able to learn much about the flow of particles in tanks such these.

The bubble column and the airlift reactor contain two sections of water flow (riser and downcomer). The riser area has a lower bulk density of fluid because of the rising air bubbles. The downcomer area …

Fiber Optic Microdeformation Sensors For Smart Structures, Lawrence S. Criscione

Opportunities for Undergraduate Research Experience Program (OURE)

When optical fibers are stressed, the deformations at the core-cladding interface induce signal attenuation. Because of their durable physical properties (high melting point) optical fibers can be embedded into certain composite materials at the manufacturing stage. Stresses on the composite induces stresses on the embedded fiber. The amount of stress on the fiber, and thus the stress on the composite, can be determined by measuring the attenuation of a signal passing through the fiber. Force was applied to a single mode and a multimode fiber in a microbend inducing plate, and the attenuation this stress created was measured.

Development Of A Data Acquisition System For Common Velocity Anemometers, Dane P. Drefke

Opportunities for Undergraduate Research Experience Program (OURE)

The objective of this project was to develop a software package that would allow more efficient, accurate, and easier use of wind tunnel data. The software was to receive an analog signal from an array of hot wire anemometers, convert the signal to a digital format, and then process the raw data, converting it into values of properties which have practical value to the user. Unfortunately, due to scheduling conflicts, this project never left the software development stage. The user interface was successfully designed. The signal conversion portion of the package was not completed and the package was never tested.

Damage Assessment Of Composite Structures With Embedded Optical Fibers, Peter E. Hackett

Opportunities for Undergraduate Research Experience Program (OURE)

One of the important features of smart composite structures is their capability to observe their own performance for proper functioning and self-diagnostic purposes. The low velocity impact damage of composite structures (matrix cracking, fiber breakage, delamination, etc.) is often difficult to detect visually and can significantly reduce the strength of the structure. The objective of this research is to develop a technique for fabricating composite laminates that will facilitate the embedment of optical fibers. Composite test specimens will be fabricated in the composite material laboratory. The fabrication of composite laminates with a health monitoring and damage assessment system capable of …

Performance Analysis For The Ccn Collection Apparatus, Deborah K. Bircher

Opportunities for Undergraduate Research Experience Program (OURE)

This paper concerns the performance testing of a system to collect and chemically analyze cloud condensation nuclei (CCN). These are the atmospheric particles which nucleate cloud drops.

The air is humidified by passage through the "haze chamber", consisting of parallel vertical plates that are covered with cotton cloth and are kept wet by water supplied at the top edge. The plates are adiabatic , and should equilibrate in temperature at the wet bulb temperature of the incoming air. Measurements of the plate temperature with eighty thermocouples indicate behavior consistent with theory.

Another part of the system is called the CFD …

Active Buckling Control Of Composite Plates, Bradley Wayne Gentelin

Opportunities for Undergraduate Research Experience Program (OURE)

The objective of the research project is to investigate the feasibility of using the rapidly growing technology of smart materials in actively controlling the buckling of laminated composite plates. Advanced composite structures are susceptible to structural instabilities under compression loadings, and the proper control of such instabilities is essential to the effective performance of the structures. The focus of the research activity is to perform an experimental study of using embedded piezoelectric materials for enhancing the critical buckling loads of laminated composite plates. The forces induced by the piezoelectric actuators under the applied voltage fields will be used to counterbalance …

Electrochemical Technique For Evaluating Surface Area Of A Treated Copper Foil, Gregory Lea

Opportunities for Undergraduate Research Experience Program (OURE)

In order to increase the strength of copper foil bonded to a polymeric substrate material, a dendritic layer is electrodeposited onto the foil. Treating the foil in this manner causes its surface to be rough and porous, thus providing for better penetration of the adhesive and a greater surface area for bonding. The process is particularly helpful in the manufacturing of printed circuit cards, due to the added bond strength which greatly enhances the durability of the printed circuit cards.

Optimizing Energy Usage In A Solar-Powered Vehicle, William R. Macneil

Opportunities for Undergraduate Research Experience Program (OURE)

The University of Missouri - Rolla (UMR) will be entering SUNRAYCE '93 and the World Solar Challenge and expects to excel in these solar-powered car races. Some of the factors involved in winning a race include efficiency, reliability, and high power. All of these are important considerations, but will be ineffective unless appropriately harnessed by a power management scheme appropriate to a race strategy. The power management scheme will be used to efficiently and effectively distribute available power to the car's systems throughout a race day. My goal was to produce a software framework into which the specifications and performance …

A Study Of High Temperature Oxidation Resistance Of Plasma Treated Nb-Ti-Al Alloys, Roderick R. Rowland

Opportunities for Undergraduate Research Experience Program (OURE)

The effect of plasma treatment on the oxidation behavior of Ti-22Al-27Nb (atomic%) has been studied. The alloy, cast as an ingot by triple VAR and worked to a billet, was cut into smaller samples and oxidation plasma pre-treated. Oxidation plasma pre-treatments were conducted at four ambient temperatures: 25°C, 200°C, 400°C, and 500°C. Both the untreated and plasma pre-treated samples were oxidized at 700°C and 1000°C for one hour, in a muffle furnace. The oxidation behavior of the samples led us to do an extended oxidation of 100 hours at 700°C. The 200°C plasma pre-treated samples showed a definite leveling out …

Using Modulated Beam Mass Spectrometry Techniques To Determine Hydrogen Levels In Single Crystal And Etched Single Crystal Silicon, Gregory J. Teets

Opportunities for Undergraduate Research Experience Program (OURE)

Silicon is an important element that has many applications ranging from semiconductors to solar cells. The quantity, diffusion, and bonding of hydrogen atoms in the silicon can play an important role in the electrical characteristics of single crystal and etched single crystal silicon. The hydrogen bonds to the impurities and to the dangling bonds in the silicon and reduces current leakage and improves performance [1-4]. Until now hydrogen bonding data has been extrapolated from related studies to determine hydrogen evolution temperatures from the silicon. Abrefah, Olander, et al. [1] studied deuterium evolution from silicon where the deuterium had been implanted …

Gamma Dose To A Fetus From Internal And External Sources, Lisa Stiles

Opportunities for Undergraduate Research Experience Program (OURE)

The purpose of this study was to use the QAD computer code to calculate the dose received by a fetus from external and internal sources to which the mother is exposed. The changes in Chapter 10, part 20 of the Code of Federal Regulations that will be put into effect January 1, 1994, will require that radiation doses be reported not only for the whole body but to specific organs and the fetus as well. Fortunately, the computer program QAD can provide health physicists and other persons responsible for monitoring radiation exposure of individuals with an accurate, easy to use …

Two Methods For Attenuation Of Vibration In Structures, Kevin Mark Mcclendon

Opportunities for Undergraduate Research Experience Program (OURE)

The purpose of this report is to discuss methods of suppressing vibration in space trusses. The discussion is centered on the approach, structural attributes, and effectiveness of each method. One approach uses structural active members which are actuated to produce “anti-vibration” to cancel vibrations in the truss. The other method is to implement passive and active damping devices at the base of the space truss, where it will absorb vibrations by fluctuating the stiffness of the structures foundation.

Cause And Effect Diagrams For Process Analysis And Control, Philip Thomas

Theses

Cause and effect diagrams can be used as an effective tool for identifying the possible causes of a quality problem. Using this diagram one can go deep into the causes of the problem and take proper remedial action. Several graphical techniques like matrix diagrams, systematic diagrams, etc., can be combined with this tool to better represent the cause effect relationships. While a quantitative approach of this technique is feasible but limited, there are useful applications based on qualitative approach to this technique. The objective of this thesis is to propose a quantitative approach to the cause and effect diagrams especially …

Design Of Holographic Optical Interconnections, Su-Chiou Tsay

Theses

Optics have many advantages over electronics in interconnecting systems together, particularly in terms of higher transmission speed and better immunity to noise. Optical interconnections may be used at all levels of computing: for local area networks, between processors or memory elements, and between boards.

In this thesis, we attempted to generate a new type of computer hologram for optical interconnection purposes. The holographic method is very promising whenever integrated optical interconnections are considered. In this research we have tried two designs: the shortest path grating design which can maximize the global output energy and the single input maximum output grating …

Selecting Windows For South Florida Residences, Florida Solar Energy Center, Ross Mccluney

FSEC Energy Research Center®

To provide some guidance to the victims of hurricane Andrew in Dade County, we performed a study of various types of modern glazing systems that might be incorporated in windows for south Florida residences.

The dominant energy impact of residential windows in south Florida comes from the solar radiant heat gain entering these windows and the corresponding heat loads on cooling systems. Thus any extra dollars spent by homeowners to purchase improved replacement windows should be spent in lowering the solar gains of the windows purchased (by reducing glazing shading coefficients or by adding exterior shading devices or vegetation) rather …

Preliminary Outline For Preservation Of Tractor Test Building, Tractor Museum

Lester F. Larsen Tractor Museum: Planning and Development Documents

Outline of preliminary plan for the Preservation of the Tractor Test Building and early test equipment as monument to early days of the modern power farming industry.

Minutes Of Ag Tractor Test And Power Museum January 12th, 1993, Tractor Museum

Lester F. Larsen Tractor Museum: Planning and Development Documents

No abstract provided.

Low Gravity Environment On-Board Columbia During Sts-40, M. J.B. Rogers, C. R. Baugher, R. C. Blanchard, R. Delombard, William W. Durgin, D. H. Matthiesen, W. Neupert, P. Roussel

Office of the Provost Scholarship

The first NASA Spacelab Life Sciences mission (SLS-1) flew 5 June to 14 June 1991 on the orbiter Columbia (STS-40). The purpose of the mission was to investigate the human body's adaptation to the low gravity conditions of space flight and the body's readjustment after the mission to the 1 g environment of earth. In addition to the life sciences experiments manifested for the Spacelab module, a variety of experiments in other scientific disciplines flew in the Spacelab and in Get Away Special (GAS) Canisters on the GAS Bridge Assembly. Several principal investigators designed and flew specialized accelerometer systems to …

A Comparison Of Low-Gravity Measurements On-Board Columbia During Sts-40, M. J.B. Rogers, C. R. Baugher, R. C. Blanchard, R. Delombard, William W. Durgin, D. H. Matthiesen, W. Neupert, P. Roussel

Office of the Provost Scholarship

The first NASA Spacelab Life Sciences mission (SLS-1) flew 5 June to 14 June 1991 on the orbiter Columbia (STS-40). The purpose of the mission was to investigate the human body's adaptation to the low-gravity conditions of space flight and the body's readjustment after the mission to the 1 g environment of earth. In addition to the life sciences experiments manifested for the Spacelab module, a variety of experiments in other scientific disciplines flew in the Spacelab and in Get Away Special (GAS) Canisters on the GAS Bridge Assembly. Several principal investigators designed and flew specialized accelerometer systems to better …

Route Fatality Risk As A Measure Of Travel Death Risk, Kopl Halperin, Jim Redman

RISK: Health, Safety & Environment (1990-2002)

The authors examine the route fatality Risk of routes in Erie County, PA and show that some pose a disproportionately high-Risk to users. They argue that transportation safety could be greatly increased by relatively small expenditures and suggest that the most cost-effective Risk amelioration is speed limit control.

Wright State University College Of Engineering And Computer Science Bits And Pcs Newsletter, Volume 9, Number 1, January 1993, College Of Engineering And Computer Science, Wright State University

BITs and PCs Newsletter

A ten page newsletter created by the Wright State University College of Engineering and Computer Science that addresses the current affairs of the college.

Visual Process Language: An Environment That Enhances Inventiveness In The System Development Process -- A Theoretical Perspective, Wita Wojtkowski, Waclaw G. Wojtkowski

IT and Supply Chain Management Faculty Publications and Presentations

This paper provides a theoretical perspective on the effect of computer support on creativity. The assertion is made that artifacts of IS do not substantially differ from those of art and science, and that the creative processes leading to the artifacts are similar. It further proposes that the use of newly available computer technology, specifically, the Visual Process Language (VPL) will have much to offer in terms of augmenting creativity when constructing IS artfacts. We postulate that VPL assists the first insight, preparation and illumination steps of the creative process, and that both Association/Images and Progressive Abstraction techniques are embedded …

All Optical Timing Extraction With Frequency Division Using A Twin Section Laser Diode, Gerald Farrell, P. Phelan, Joe Hegarty, J. A. Shields

Articles

All-optical timing extraction from a coded line signal with division of the extracted clock frequency is demonstrated using a single twin-section self-pulsating laser diode. Either the bit-rate clock or a submultiple of the bit-rate clock can be extracted, depending only on the dc biases applied to the self-pulsating laser diode. Timing extraction is carried out for the first time without optical injection locking of the self-pulsating laser diode by the optical data source.

The Honor Society Of Agriculture, Gamma Sigma Delta, Nebraska Chapter History, Diamond Jubilee 1918-1993, Charles H. Adams

Gamma Sigma Delta, Nebraska Chapter: Bylaws and Other Documents

GAMMA SIGMA DELTA is a faculty governed society that selects its members from junior and senior students, graduate students, faculty, and alumni for the promotion and recognition of high achievement. While Gamma Sigma Delta is an honor society of agriculture, it may elect members from related fields such as biology, botany, chemistry, economics, entomology, forestry, home economics, plant pathology, sociology, statistics, veterinary medicine, or zoology when the work of the individuals is related to agriculture. Officers, committee chairpersons, and others leading the chapter are faculty or alumni.

EARLY INTERNATIONAL HISTORY

GAMMA SIGMA DELTA INTERNATIONAL OFFICERS FROM THE NEBRASKA CHAPTER

THE …

Graduate Catalog Center For Computer And Information Sciences, Nova Southeastern University

College of Engineering and Computing Course Catalogs

No abstract provided.

Heating Of Calcium Phosphate Crystals: Morphological Consequences And Biological Implications, W. Bohne, J. A. Pouezat, L. Peru, G. Daculsi

Cells and Materials

Sintering hydroxyapatite (HA) and ß-tricalcium phosphate (ß-TCP) affects the chemical composition, the crystallinity, and the morphological features as demonstrated by means of X-ray diffraction (XRD) , infrared spectroscopy (IR), and scanning electron microscopy (SEM). When heated to 1230°C, 16.7% of HA had decomposed to ß-TCP. SEM investigations showed homogeneous, sharp angular polyhedric blocks of 30 to 50 µm with rare surface pores. On heating at 1230°C, ß-TCP had entirely transformed to a-TCP. During sintering, the size of the powder grains increased and progressive bridging between the grains was observed. At 1230°C, a network within round-shaped polyhedric blocks of 50 to …