Engineering Commons^™

Design Of A 320x122 Mwir-Ccd Ptsi-Si Imaging Radiometer With Automatic Optical Integration Time Control, Nathaniel Joseph Mccaffrey

Theses

An infrared CCD camera system was designed and developed to operate a 320X244 Schottky-barrier IR-CCD Focal Plane Array (FPA) as an imaging radiometer. The goal of this research was to develop a reliable radiometer capable of resolving temperatures between 50 and 1000°C to within 1°C accuracy using non-contact spectral thermographic methods. To accomodate this wide dynamic range, the imager was operated in a non-interlaced format with variable optical integration times ranging from 120µsec to 122msec. Variable integration control was achieved by employing a "dump and read" timing procedure. To facilitate this operation, novel circuitry was developed for dynamically controlling the …

Detection And Location Of Pipe Damage By Artificial-Neural-Netprocessed Moire Error Maps, Barry G. Grossman, Frank S. Gonzalez, Joel H. Blatt, Scott Christian Cahall

Electrical Engineering and Computer Science Faculty Publications

A novel automated inspection technique to recognize, locate, and quantify damage is developed. This technique is based on two already existing technologies: video moire metrology and artificial neural networks. Contour maps generated by video moire techniques provide an accurate description of surface structure that can then be automated by means of neutral networks. Artificial neural networks offer an attractive solution to the automated interpretation problem because they can generalize from the learned samples and provide an intelligent response for similar patterns having missing or noisy data. Two dimensional video moire images of pipes with dents of different depths, at several …

Cone Penetration In Cemented Deposits-A Field Study, Semih Arslan

LSU Historical Dissertations and Theses

Neglecting cementation results in an underestimation of slope stability and pile capacity in design and analysis of geotechnical engineering problems related to cemented deposits. Developing methods to identify and assess the engineering characteristics of cemented deposits is an important subject in geotechnical engineering.

This study is conducted to evaluate the reliability of the prediction schemes proposed by previous investigators through a field study of cone penetration in a cemented deposit and respective laboratory triaxial study on undisturbed cemented specimens. The effect of cementation on cone penetration resistance is investigated through the field study, and the effects of cementation on drained …

Light-Emitting Diodes From Partially Conjugated Poly(P-Phenylene Vinylene), C. Zhang, David Braun, A. J. Heeger

Electrical Engineering

We report the effect of conversion conditions on the device characteristics of poly(p-phenylene vinylene) (PPV) light-emitting diodes. Both electroluminescence and photoluminescence intensities decrease with increasing degree of conversion. Partial conjugation enhances the electroluminescence intensity and gives an efficiency (with Ca as electron-injecting contact) as high as 0.75% photons per electron, about two orders of magnitude more efficient than from similar devices prepared from fully converted PPV. The results of constant current stress measurements suggest that the partially conjugated PPV diode is relatively stable at room temperature.

Effects Of Crosstalk On Fidelity In Page-Oriented Volume Holographic Optical Data Storage, Gregory P. Nordin, P. Asthana

Faculty Publications

Using numerical simulation, we quantitatively examine the effects of cross talk on the recall fidelity of stored binary data in a page-oriented volume holographic memory system. We discuss the trade-off between the signal-to-noise ratio of the reconstructed bits and the optical throughput of the system (i.e., the fraction of the incident beam that is diffracted to the detector plane). We show that significant gains in the signal-to-noise ratio can be achieved with modest decreases in optical throughput in the region where the highest throughput occurs. The magnitude of this trade-off is influenced by both beam degeneracy and coherent recording cross …

Gravity Sedimentation: A One-Dimensional Numerical Model, Joanna Robin Karl

Dissertations and Theses

A large fraction of the current cost of wastewater treatment is from the treatment and disposal of wastewater sludge. Improved design, energy efficiency, and performance of dewatering facilities could significantly decrease transport and disposal costs.

Dewatering facilities are designed based on field experience, trial and error, pilot plant testing, and/or full scale testing. Design is generally time-consuming and expensive. A full-scale test typically consists of side-by-side operation of 4 to 5 full-scale dewatering units for several weeks to more than 6 months. Theoretical modeling of the physics of dewatering units such as the belt filter press, based on laboratory determined …

Designing And Simulating A Multistage Sampling Rate Conversion System Using A Set Of Pc Programs, David Joseph Hagerty

Dissertations and Theses

The thesis covers a series of PC programs that we have written that will enable users to easily design FIR linear phase lowpass digital filters and multistage sampling rate conversion systems. The first program is a rewrite of the McClellan-Parks computer program with some slight modifications. The second program uses an algorithm proposed by Rabiner that determines the length of a lowpass digital filter. Rabiner used a formula proposed by Herrmann et al. to initially estimate the filter length in his algorithm. The formula, however, assumes unity gain. We present a modification to the formula so that the gain of …

Designing And Simulating A Multistage Sampling Rate Conversion System Using A Set Of Pc Programs, David Joesph Hagerty

Dissertations and Theses

The thesis covers a series of PC programs that we have written that will enable users to easily design FIR linear phase lowpass digital filters and multistage sampling rate conversion systems. The first program is a rewrite of the McClellanParks computer program with some slight modifications. The second program uses an algorithm proposed by Rabiner that determines the length of a lowpass digital filter. Rabiner used a formula proposed by Herrmann et al. to initially estimate the filter length in his algorithm. The formula, however, assumes unity gain. We present a modification to the formula so that the gain of …

Quasi-Static Deflection Compensation Control Of Flexible Manipulator, Jingbin Feng

Dissertations and Theses

The growing need in industrial applications of high-performance robots has led to designs of lightweight robot arms. However the light-weight robot arm introduces accuracy and vibration problems. The classical robot design and control method based on the rigid body assumption is no longer satisfactory for the light-weight manipulators. The effects of flexibility of light-weight manipulators have been an active research area in recent years. A new approach to correct the quasi-static position and orientation error of the end-effector of a manipulator with flexible links is studied in this project. In this approach, strain gages are used to monitor the elastic …

Distributed Economic Systems With Agents That Learn, Stanley Foster Perry

Dissertations and Theses

Economic systems are distributed in the sense that economic agents make decisions without any central control. Prices, quantities, wealth, and market structure emerge from the interaction of agents acting in their own self interest. The concepts and language of systems science are used to define economic systems in a manner that captures and articulates the distributed nature of economic systems. Further, the systems definition permits multiple views of the economic system, and in addition, allows the agents to "step outside" the system in order to study it.

Economic systems are defined in such a way that it is feasible to …

Inhibition Of Surface-Related Electrical Breakdown Of Long P+-I-N+ Silicon Structures, F. E. Peterkin, P. F. Williams, B. J. Hankla, L. L. Buresh, S. A. Woodward

P. F. (Paul Frazer) Williams Publications

Semiconductors such as silicon and GaAs appear attractive for use in high voltage devices because of their high bulk dielectric strength. Typically, however, such devices fail at a voltage well below that expected due to a poorly understood, surface-related breakdown process. In this letter we present empirical results which show that such breakdown of long silicon p⁺-i-n⁺ devices can be inhibited by the application of weak visible or near-infrared illumination. These results suggest a technique for avoiding surface flashover in practical high voltage devices, and provide information about the physical mechanisms responsible for initiating …

Measurement Of The Nonsteady Flow Field In The Opening Of A Resonating Cavity Excited By Grazing Flow, Hans R. Graf, William W. Durgin

Office of the Provost Scholarship

Flow past the opening of a cavity can excite acoustic resonance. The periodic velocity field in the region of the cavity opening has been measured for various flow conditions and the vorticity distribution has been computed from the measured data using numerical differentiation. The results indicate that the shear layer rolls up into discreet vortices, which travel across the cavity opening. Two resonances were found. The first is characterized by a single vortex being present and results in the greatest amplitude. The second is characterized by the presence of two vortices which excite a distinct but lesser amplitude resonance. As …

Wright State University College Of Engineering And Computer Science Bits And Pcs Newsletter, Volume 9, Number 5, May 1993, College Of Engineering And Computer Science, Wright State University

BITs and PCs Newsletter

An eight page newsletter created by the Wright State University College of Engineering and Computer Science that addresses the current affairs of the college.

Acuta Enews May 1993, Vol. 22, No. 5

ACUTA Newsletters

In This Issue

Call for Nominations page 2

President's Message page 3

MHEC $aves with Virtual Private Network page 4

Board of Directors Meeting page 5

Tireed Dues page 5

Toll Fraud Takes Aim page 6

Infrastructure page 7

Toll Fraud Checklist page 8

Will My Cellular Phone Fry My Brain? page 9

Executive Director's Message page 11

Analysis Of Laser Pulse Chirping In Mode-Locked Vertical-Cavity Surface-Emitting Lasers, Wenbin Jiang, Dennis J. Derickson, John E. Bowers

Electrical Engineering

Mode-locked vertical cavity lasers have a large cross-sectional area and consequently a large saturation energy and large peak powers. The authors analyze excess optical bandwidth generation in these lasers and find that self-phase modulation due to optical pumping and gain saturation is the dominant factor in inducing laser pulse chirping. The large magnitude of the chirp makes intracavity prism-pair compensation difficult. Adjustment of the cavity length has a major impact on the pulse chirping, as observed experimentally. Proper adjustment can result in a large linear frequency chirp which can be compensated using external pulse compression techniques

Bulletin No 4242 - The Lyre Trellis For Viticulture, Alain Carbonneau Dr, Vincent P. Desplat, John F. Elliott, Peter Watt

Bulletins 4000 -

The lyre vine training system uses wide rows, an open canopy, and shoot positioning to increase grape maturity and quality while maintaining production levels. It is so named because the end-on view of the vine canopy trained to this type of trellis resembles the shape of the musical instrument, the lyre.

This improvement in quality has not only been established in the diverse experimental vineyards of the National Institute for Agronomic Research (INRA) in France but also in many commercial vineyards throughout the major wine growing regions of the world.

Reaction Kinetics Analysis Of Urethane Polymerization To Gelation, B Liu, Hossein Noureddini, J S. Dorsey, Delmar C. Timm

Papers in Molecular Chemistry

A chemical reaction analysis of a thermosetting, urethane resin formulated from a triol and a diisocyanate is reported. Population density distributions of oligomeric molecules, monomer concentration, the cumulative molar concentration of intramolecular bonds, the resin's average molecular weights, and extent of reaction were determined as a function of time. Rate expressions for intermolecular reactions were first order with respect to the concentration of each reactant and were proportional to the functionality of their respective chemical moieties. Rate expressions for intramolecular reactions were first order with respect to the concentration of the reactant and were proportional to the functionality of the …

Jet Velocity Dissipation And Modelling With Aeration, Stephen J. Schlenker

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The effects of natural aeration and fall height upon velocity dissipation and modelling were studied. Underwater velocities and void ratios (proportion of air volume to total volume) were measured along the jet centerline at various depths in the receiving pool under 1- and 2-inch diameter vertical circular free-falling jets. Maximum air bubble penetration depths were also measured. In the tests, the nozzle velocities were designed so that the two differently sized models would have equivalent Froude numbers for direct comparison of respective underwater parameters. Air entrainment-the natural development of air bubbles within a pool receiving a free-falling jet-causes voids to …

A Mechanistic Approach To Modeling Habitat Needs Of Drift-Feeding Salmonids, R. Craig Addley

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

A mechanistic model is developed to determine the habitat needs of drift-feeding stream salmonids from the direct cause-and-effect relationships of environmental and physiological variables on net energy intake (NEI). The model determines NEI by subtracting energy costs (basal metabolism, swimming cost, digestion cost) and losses (egestion and excretion) from the gross energy intake obtained as a result of simulated prey capture. The prey capture portion of the model utilizes components of the predation model of C.S. Holling and the prey capture model of N.F. Hughes and L.M. Dill to determine the rate of prey capture (gross energy intake) as a …

St. Joseph School Area Neighborhood Housing Project Revitalization Study, Kentucky Library Research Collections

Research Collections

No abstract provided.

Resolution Enhancement Of Spaceborne Scatterometer Data, David G. Long, Perry J. Hardin, Peter T. Whiting

Faculty Publications

A method for generating enhanced resolution radar images of the Earth's surface using spaceborne scatterometry is presented. The technique is based on an image reconstruction technique that takes advantage of the spatial overlap in scatterometer measurements made at different times to provide enhanced imaging resolution. The reconstruction algorithm is described, and the technique is demonstrated using both simulated and actual Seasat-A Scatterometer (SASS) measurements. The technique can also be used with ERS-1 scatterometer data. The SASS-derived images, which have approximately 4-km resolution, illustrate the resolution enhancement capability of the technique, which permits utilization of both historic and contemporary scatterometer data …

An Expert System For Design, Materials Selection And Manufacture Of Frp Liquid Containers, Khalid Mahmoud Abdel Ghany

Archived Theses and Dissertations

No abstract provided.

A Comprehensive Fully Integrated Finite Element Analysis Of Metal Flow And Die Stresses In Forward Cold Extrusion, Tarek Hamdi Farid

Archived Theses and Dissertations

No abstract provided.

Machine Interference Problems In Robot Served Manufacturing Systems Under Priority Analysis Considerations, Amr Fawzi Hamed

Archived Theses and Dissertations

No abstract provided.

Spontaneous Coherent Pulsations In Standing-Wave Laser Oscillators: Stability Criteria For Homogeneous Broadening, Pitak Chenkosol, Lee W. Casperson

Electrical and Computer Engineering Faculty Publications and Presentations

The stability criteria for single-mode standing-wave laser oscillators in the homogeneously broadened limit are reported, and two types of criteria are distinguished. The first type (type 1) corresponds to the minimum value of the threshold parameter for which an infinitesimal perturbation away from steady state grows into an oscillatory solution. A second type (type 2) corresponds to the minimum value of threshold parameter for which large-amplitude oscillations do not decay to the steady-state solution. Undamped pulsations in single-mode homogeneously broadened standing-wave laser oscillators are found to occur at a much higher excitation level than in ring-laser oscillators with homogeneous broadening. …

Protective Construction With Reinforced Earth, Christopher Y. Tuan

Civil Engineering Faculty Proceedings & Presentations

The objective of this research is to develop a simple analytical method that characterizes plane shock wave propagation through reinforced earth and the dynamic interaction with modular retaining wall panels. The shock wave was initiated as a velocity boundary condition. The exact solution was obtained by the Laplace transform method. A step-by-step design procedure based on the "limit state" concept is proposed. Because of the impulsive nature of ground shock. the maximum response of the wall panel and reinforced soil system depends mainly on the capacity and rate of energy absorption and dissipation of the system. Therefore, the connection between …

Diffraction Based Latent Image Analysis For Improving Cd Control During Lithography, Lisa-Michelle Milner

Electrical and Computer Engineering ETDs

The smallest device geometries, the critical dimensions (CDs), diminish with each generation of microelectronics. This puts more demands on the lithography process to repeatably produce these small dimensions within their 10% tolerance. I believe that individual optimization of the lithography steps will be necessary to meet the stringent demands of smaller CDs. This is possible through analysis of the latent image (the exposed, undeveloped pattern in the resist). In this work, a metrology technique is discussed for the determination of optimum lithography parameters through an interrogation of the latent image. This technique involves illuminating a latent image grating with a …

The Application Of Neural Networks To Optimal Robot Trajectory Planning, Daniel J. Simon

Electrical and Computer Engineering Faculty Publications

Interpolation of minimum jerk robot joint trajectories through an arbitrary number of knots is realized using a hardwired neural network. Minimum jerk joint trajectories are desirable for their similarity to human joint movements and their amenability to accurate tracking. The resultant trajectories are numerical rather than analytic functions of time. This application formulates the interpolation problem as a constrained quadratic minimization problem over a continuous joint angle domain and a discrete time domain. Time is discretized according to the robot controller rate. The neuron outputs define the joint angles (one neuron for each discrete value of time) and the Lagrange …

Suboptimal Robot Joint Interpolation Within User-Specified Knot Tolerances, Daniel J. Simon, Can Isik

Electrical and Computer Engineering Faculty Publications

Approximation of a desired robot path can be accomplished by interpolating a curve through a sequence of joint-space knots. A smooth interpolated trajectory can be realized by using trigonometric splines. But, sometimes the joint trajectory is not required to exactly pass through the given knots. The knots may rather be centers of tolerances near which the trajectory is required to pass. In this article, we optimize trigonometric splines through a given set of knots subject to user-specified knot tolerances. The contribution of this article is the straightforward way in which intermediate constraints (i.e., knot angles) are incorporated into the parameter …

Practical Optimization Modeling For Contaminant Plume Management, Richard C. Peralta, Alaa H. Aly

Civil and Environmental Engineering Faculty Publications

Simulation/optimization (S/0) models can be used to greatly speed the process of computing desirable groundwater pumping strategies for plume management. They make the process of computing optimal strategies fairly straightforward and can help minimize the labor and cost of groundwater contaminant clean-up.