Engineering Commons^™

Microspheres For Radiation Therapy, D. E. Day, Gary J. Ehrhardt

Materials Science and Engineering Faculty Research & Creative Works

Microspheres for radiation therapy of a mammal which have a non-radioactive isotope which emits beta or gamma radiation of therapeutic intensity upon being irradiated. The microspheres also contain elements which do not become radioactive upon irradiation. The chemical durability of the microspheres is such that they do not release a significant amount of radiation emitting radioisotope into the mammal’s system upon administration. Microspheres containing phosphorus or yttrium; and carbon, nitrogen, fluorine, sodium, magnesium, aluminum, silicon, potassium, vanadium, manganese, gallium, niobium, iodine and/or lead.

Performance Evaluation Tools For Interconnection Network Design, Anna Kolinska

Dissertations and Theses

A methodology is proposed for designing performance optimized computer systems. The methodology uses software tools created for performance monitoring and evaluation of parallel programs, replacing actual hardware with a simulator modeling the hardware under development. We claim that a software environment can help hardware designers to make decisions on the architectural design level. A simulator executes real programs and provides access to performance monitors from user's code. The performance monitoring system collects data traces when running the simulator and the performance analysis module extracts performance data of interest, that are later displayed with visualization tools. Key features of our methodology …

Design Of A Vibration Excitation Device, Brian Wallace, Brandon Dawe

Honors Theses

A vibration excitation source has been designed for use in beam and plate vibration laboratory demonstrations. This source is capable of providing single frequency excitations below 160 cycles per second (Hz). Since it will be used in a variety of experiments by students, ease of use and quick setup time have been major considerations of design. Performance of this source has been evaluated and will be presented along with one example application.

Motion Synthesis Of Mechanisms Using Constraint Manifolds In Image Space, Yeou-Kai Wu

Dissertations

Kinematic mappings, quaternion algebra, and constraint manifolds in the algebraic image space are applied to the problems of the dimensional synthesis of mechanisms. Dimensions of a mechanism are determined such that a tracer frame fixed on the coupler will pass through or at least as close as possible to the desired positions and orientations in the physical space as the input link rotates about its fixed joint. First, using kinematic mappings, the desired positions and orientations of the tracer frame of the mechanism can be mapped onto points in a hyperspace in which the motion of the tracer frame can …

Behavior Of Biaxially Loaded Concrete-Encased Composite Columns, Pedro Ricardo Munoz

Dissertations

The theory of nonlinear behavior of biaxially loaded short and slender composite columns is used to study the load-deformation and moment-curvature of four pin-ended composite column specimens tested under axial compressive load and biaxial bending moments in a single curvature. The accuracy of the test results is verified by comparison with analytical results obtained by a method of analysis that includes the nonlinear material properties of concrete and steel and covers the ascending and descending branches of the linear segmented column specimen. A computational method is presented to model the analytical behavior of the biaxially loaded composite column. Its validity …

14th Conference On Senior Engineering Design Projects, College Of Engineering And Applied Sciences

Senior Engineering Design Conference

The 14th Conference on Senior Engineering Design Projects was held on April 12, 1994 at the College of Engineering and applied Sciences on the Parkview Campus of Western Michigan University. The college sponsors the conference to showcase the work of its graduating seniors, who are required to complete a capstone project that puts into practice what they have learned. Many of the projects are sponsored by business and industry.

Ole Miss Engineer 1994

Ole Miss Engineer

No abstract provided.

Santa Clara Magazine, Volume 36 Number 2, Spring 1994, Santa Clara University

Santa Clara Magazine

8 - SACRED MIX A mystical marriage of indigenous culture and Christianity, El Santuario de Chimay6, the most popular pilgrimage site in the United States, has an inexplicable pull. By Martin L. Cook

11 - UP CLOSE: CARROLL WILLIAMS SCU's athletic director discusses his plans and hopes for the future of Santa Clara's sports program. Interview by Jim Young

16 - AS INDIVIDUALS AND AS ONE Working as a community of individuals toward a shared vision, we will create the great Catholic, Jesuit university of our dreams. By Paul Locatelli, S.J.

20 - PUTTING DIVERSITY TO WORK With one of …

Bulletin - Spring, 1994, Civil Aviation Medical Association

Browse all Civil Aviation Medical Association Newsletters

A sixteen page newsletter of the Civil Aviation Medical Association. The newsletter provided news about civil aviation medicine and information related to the organization.

Satellite Data Communications Link Requirements For A Proposed Flight Simulation System, Gerald M. Kowalski

Master's Theses - Daytona Beach

The purpose of this study was to investigate the requirements necessary for data and voice communication via satellite, linking Embry-Riddle Aeronautical University (ERAU) and other flight training facilities. The proposed research was conducted following a descriptive method of collecting information, generating and analyzing data, and listing the results for the proposed link requirements. The current fiber-optic communications link at ERAU in Daytona Beach was presented to establish a general foundation of communications. Research was done into methods used by satellite common carriers for realistic data and calculations. A proposed data link to connect flight simulators at the ERAU Prescott campus …

Acuta Enews April 1994, Vol. 23, No. 4

ACUTA Newsletters

In This Issue

Board report

President's message

ISDN at WVU

Book reviews

Hold down toll fraud

Takin' care of business

Internal Acoustic Excitation Of An Airfoil Surface For Drag Reduction, Wendy L. Holforty

Masters Theses

This research investigated the effects of internal acoustic excitation on the boundary layer and surface of an airfoil. A NACA 16- 018 symmetric airfoil was tested in the Western Michigan University wind tunnel. The shedding vortex frequency of the airfoil was determined using hot-film anemometry. Using stroboscopic and holographic interferometry, the natural frequencies of the airfoil surface were determined. The airfoil surface was tuned such that the frequency of the shedding vortex is a resonant frequency and two internally mounted acoustic drivers were used to excite the surface of the airfoil at the shedding vortex frequency. The effects on pressure …

The Effects Of Male-Based Anthropometric Cockpit Designs On Self-Reported Female Aircrew Accommodation, Edith Marie-Anntoinette Dylewska

Master's Theses - Daytona Beach

The purpose of this study was to examine the effects of male-based anthropometric cockpit designs on self-reported female aircrew accommodation. A descriptive survey research method was used to collect the required data. The instrument utilized was a self-developed questionnaire/opinionnaire. It contained both Likert-type and open-ended questions. The 153 subjects were selected from the population of active, civil, female pilots in the United States of America, who hold a Federal Aviation Administration (FAA) Airline Transport Pilot (ATP) Certificate. The responses provided to the Likert questions were analyzed using a goodness-of-fit statistical method. The data collected did not support the research hypothesis …

Wright State University College Of Engineering And Computer Science Bits And Pcs Newsletter, Volume 10, Number 4, April 1994, College Of Engineering And Computer Science, Wright State University

BITs and PCs Newsletter

A ten page newsletter created by the Wright State University College of Engineering and Computer Science that addresses the current affairs of the college.

Characterization Of Electromagnetically Coupled Superquadric Loop Antennas For Mobile Communications Applications, Michael A. Jensen, Yahya Rahmat-Samii

Faculty Publications

Analysis of two mutually coupled loop antennas with arbitrary relative orientation and position and possibly different geometries is presented. The antennas are represented by generalised superquadric curves, which include circular, elliptical, and rectangular loop geometries, and they may be located either in a homogeneous region or next to an infinite ground plane. A Galerkin-type moment method with piecewise sinusoidal subsectional basis and weighting functions is used. Special consideration is given to implement the solution using curved wire segments instead of the commonly employed linear segments to improve computational efficiency. This very general computational tool is used to investigate the behaviour …

Estimating The Required Jacking Force, Alan Atalah, David Bennett, Tom Iseley

Construction Management Faculty Publications

The process of estimating the required jacking force to jack a pipe through the ground was, and still is, an art requiring much experience and good judgement. Many factors and risks affect the determination of the jacking force. This paper is an attempt to use civil engineering techniques to rationalize and compare methods for estimating the required jacking force. Four of these methods are summarized and used to estimate the jacking loads on a job completed in Staten Island, New York. The actual and predicted results are compared.

The frictional resistance values estimated based on Terzaghi 1 s silo theory …

A Powerful And Computationally Efficient Algorithm For Transmission Loss Calculation, Anoop Nanda, David V. Uy, J. Nanda, E. Khan, Mariesa Crow

Electrical and Computer Engineering Faculty Research & Creative Works

This paper deals with the formulation of transmission loss P_L of a power system through a set of new coefficients (A coefficients) which are extremely efficient, exact and robust and suitable for real time application. Results on a few IEEE test systems are exciting and encouraging. They demonstrate that these A coefficients faithfully represent the system loss, are extremely robust and need not be re-evaluated for changes in the system loading conditions either for evaluation of system loss or cost of generation for economic load dispatch.

An Ergonomics Approach To Evaluate The Use Of Two Different Fixtures For Upholstering, Maria Luisa Roa

Masters Theses

A furniture company in West Michigan proposed an evaluation of a new fixture that will be used in a repetitive manual stapling operation.

Numerous studies reveal that activities involving repetitive wrist motions cause inflammation in the median nerve that runs through the structure of the carpal wrist, causing a cumulative disorder known as Carpal Tunnel Syndrome (CTS). This syndrome is one of the most prevalent in industrial settings and service companies.

This study investigated if the use of a new design of a fixture had an impact on operators' performances. Three-dimensional comparative analysis was used to observe operators' wrist angular …

Basic Resonant Topologies For Switching Power Supplies, Zacharias K. Vachaparambil

Department of Electrical and Computer Engineering Technical Reports

The objective of this thesis is to study the basic resonant converter topologies for switching power supplies and to compare their performance under different operating conditions. The series and parallel resonant converters are analyzed in detail. The analysis uses the state plane method, which gives a good insight of the operation of the converter. It is found that these converters have more desirable characteristics when operated at a frequency above the resonant frequency rather than below it. Analytical results are verified by sinlulation and experiment.

Production Of Interleukin 10 By Islet Cells Accelerates Immune-Mediated Destruction Of Beta Cells In Nonobese Diabetic Mice., Lise Wogensen, Myung-Shik Lee, Nora Sarvetnick

Journal Articles: Regenerative Medicine

The T helper type 2 (Th2) cell product interleukin 10 (IL-10) inhibits the proliferation and function of Th1 lymphocytes and macrophages (M phi). The nonobese diabetic mouse strain (NOD/Shi) develops a M phi and T cell-dependent autoimmune diabetes that closely resembles human insulin-dependent diabetes mellitus (IDDM). The objective of the present study was to explore the consequences of localized production of IL-10 on diabetes development in NOD/Shi mice. Surprisingly, local production of IL-10 accelerated the onset and increased the prevalence of diabetes, since diabetes developed at 5-10 wk of age in 92% of IL-10 positive I-A beta g7/g7, I-E- mice …

Analysis Of Random Structure-Acoustic Interaction Problems Using Coupled Boundary Element And Finite Element Methods, Carl S. Pates Iii

Mechanical & Aerospace Engineering Theses & Dissertations

A coupled boundary element(BEM)-finite element(FEM) approach is presented to accurately model structure-acoustic interaction systems. The boundary element method is first applied to interior, two and three-dimensional acoustic domains with complex geometry configurations. Boundary element results are very accurate when compared with limited exact solutions.

Structure-interaction problems are then analyzed with the coupled FEM-BEM method, where the finite element method models the structure and the boundary element method models the interior acoustic domain. The coupled analysis is compared with exact and experimental results for a simplistic model. Composite panels are analyzed and compared with isotropic results. The coupled method is then …

Flow Simulations About Steady-Complex And Unsteady Moving Configurations Using Structured-Overlapped And Unstructured Grids, James Charles Newman Iii

Mechanical & Aerospace Engineering Theses & Dissertations

The limiting factor in simulating flows past realistic configurations of interest has been the discretization of the physical domain on which the governing equations of fluid flow may be solved. In an attempt to circumvent this problem, many Computational Fluid Dynamic (CFD) methodologies that are based on different grid generation and domain decomposition techniques have been developed. However, due to the costs involved and expertise required, very few comparative studies between these methods have been performed. In the present work, the two CFD methodologies which show the most promise for treating complex three-dimensional configurations as well as unsteady moving boundary …

Diamond Thin Film Sensors For Hypersonic Flow Studies, Bhaskar Kumar Bulusu

Electrical & Computer Engineering Theses & Dissertations

Conventional metal film sensors can measure flow instabilities of the order of 60 kHz. The turbulence fluctuations in the hypersonic regime are of the order of 200- 400 kHz. To measure these fluctuations, sensors with an enhanced frequency response are required. Therefore, it is required to identify the parameters to enhance the frequency response. These include parameters such as the temperature sensitivity, the resistivity, the thermal conductivity, the diffusivity, specific heat capacity and the geometric size and shape of the film and the substrate. A selection of materials was then carried out to maximize the frequency response. Diamond was identified …

Implementation Of A Multiblock Sensitivity Analysis Method In Numerical Aerodynamic Shape Optimization, James Matthew Lacasse

Mechanical & Aerospace Engineering Theses & Dissertations

A multiblock sensitivity analysis method is applied in a numerical aerodynamic shape optimization technique. The Sensitivity Analysis Domain Decomposition (SADD) scheme which is implemented in this study was developed to reduce the computer memory requirements resulting from the aerodynamic sensitivity analysis equations, Discrete sensitivity analysis offers the ability to compute quasi-analytical derivatives in a more efficient manner than traditional finite-difference methods, which tend to be computationally expensive and prone to inaccuracies.

The direct optimization procedure couples CFD analysis based on the two-dimensional thin-layer Navier-Stokes equations with a gradient-based numerical optimization technique. The linking mechanism is the sensitivity equation derived from …

Transverse Stress Effects For Laminated Composite Beams In Bending, Christine Chatterton Schleicher

Mechanical & Aerospace Engineering Theses & Dissertations

A higher-order theory and an associated finite element formulation are developed for analysis of laminated planar beams in bending. The higher-order theory incorporates both transverse normal stress and transverse shear stress, and is developed using two approaches. The first approach is based on assuming the transverse normal strain distribution to be a cubic function through the beam thickness, while the second approach is based on assuming the transverse normal stress distribution to be a cubic function through the beam thickness. In both approaches, the transverse shear strain distribution is assumed to be a quadratic function through the beam thickness. Theoretical …

Upon Closer Inspection...U.S. Naval Aviation Mishaps 1977-1992, Scott A. Shappell, Douglas A. Wiegmann

Publications

The U.S. Navy/Marine Corps Class A flight/flight-related mishap rate has declined markedly since 1953. However, analysis of all Class A, B, and C naval aviation mishaps between January 1977 and December 1992 reveals that mishaps attributable to human factors have declined at a slower rate than those attributable to mechanical/environmental factors. Upon closer inspection of the data, marked differences were evident between single-piloted and dual-piloted aircraft. Global trends were primarily a function of single-piloted aircraft, particularly when phase of flight and time of day that a mishap occurred are considered. Previously reported improvement in aviation safety may be biased by …

An Aerodynamic And Static-Stability Analysis Of The Hypersonic Applied Research Technology (Hart) Missile, Kenneth J. Moran

Theses and Dissertations

The flow about the complete Hypersonic Applied Research Technology (HART) missile is simulated for inviscid, laminar, and turbulent conditions and Mach numbers from 2 to 6. An explicit, second-order-accurate, flux-difference-splitting, algorithm is implemented and employed to solve the Navier-Stokes equations. The formulation models turbulence with the zero-equation, Baldwin-Lomax turbulence model, accounting for pressure-gradient and compressibility effects. The equations are solved using a finite-volume methodology. In the first part of the study, numerical experiments are performed using an infinitely thin-fin approximation. The aerodynamic and static-stability characteristics are investigated to determine if conventional supersonic missile configurations can be flown at Mach numbers …

Transient Body Force Effects On The Dryout And Rewet Of A Heated Capillary Structure, Michael K. Reagan

Theses and Dissertations

A transient, one-dimensional numerical code was developed to model the liquid flow in a non-uniformly heated, axial square groove. The groove was subjected to transient body forces up to approximately 0.51 m/s² . Axial variation in meniscus levels, shear stress and heat transfer between the groove wall and the liquid, axial conduction through the liquid, evaporation and body forces were accounted for in the model. Dryout and rewet of the groove were allowed; the front location was determined using conservation of mass and linear extrapolation. A physical experiment was performed with a stainless steel plate into which eight square …

A Direct Numerical Simulation Of Vortex Breakdown Induced Tail Buffet, Steven James Massey

Mechanical & Aerospace Engineering Theses & Dissertations

A simulation of tail buffet is presented for a delta wing-vertical tail configuration. Flow conditions are chosen such that the wing primary-vortex cores experience vortex breakdown and the resulting turbulent wake flow impinges on the vertical tail. The dimensions and material properties of the vertical tail are chosen such that the deflections are large enough to insure interaction with the flow, and the natural frequencies are high enough to facilitate a practical computational solution. This multidisciplinary problem is solved sequentially for the fiuid flow, the elastic deformations and the grid displacements. The fluid flow is simulated by time accurately solving …

A State Architecture Notation Specification Of The Electronic Industries Association Rs-232-C Generic Interchange Circuit, Nelson E. Hastings

Masters Theses

The Electronic Industries Association (BIA) RS-232-C recommendation is an interface specification which was introduced in August 1969 and presents a natural language specification of a 25 pin binary serial data interface between a Data Communication Equipment (DCE) and a Data Terminal Equipment (DTE). The exchange of data signals between a DCE and a DTE ultimately provides the means for DTEs to communicate on networks of DCEs interconnected by different transmission mediums possibly over great distances. The exchange of data signals between a DCE and a DTE occurs at an interface via interchange circuits.

In this thesis we will create a …