Engineering Commons^™

Electroless Metal Adhesion To Organic Dielectric Material With Phase Separated Morphology, Ravi F. Saraf

Department of Chemical and Biomolecular Engineering: Patents

Improved adhesion of electroless metal deposited on an organic dielectric layer with phase separated morphology is accomplished by the spontaneous formation of a morphologically and topographically rough surface. In one embodiment a ternary solution of a polar solvent and two polymer precursors of the same polymer which are separable in two phases of different order are cast in film on a substrate and heated to form two phases of different order to spontaneously produce a rough surface. Upon exposure to an alkaline solution, one phase is etched at a faster rate than the other. Seeding and electroless deposition of a …

The Evaluation Of Device Model Dependence In The Design Of A High-Frequency, Analog, Cmos Transconductance-C Filter, Susan Rose Brotman

Dissertations and Theses

It is important to have the ability to predict the effects of device model variation when designing integrated transconductance-C type active filters. Applying these filters to integrated circuit design has become increasingly popular due to its ease of implementation in monolithic form. With the introduction of fully automated design tools, predictable behavior of high-level variables becomes still more important. The purpose of this study is to evaluate the process parameter spread of analog device models to determine the effect on the design parameters of an active filter. This information's significant contribution directly effects the feasibility and realization of automating analog …

High-Frequency Analog Voltage Converter Design, Ping Xu

Dissertations and Theses

For many high-speed, high-performance circuits, purely differential inputs are needed. This project focuses on building high-speed voltage converters which can transfer a single-ended signal to a purely differential signal, or a differential input signal to a single-ended signal.

Operational transconductance amplifier (OTAs) techniques are widely used in high-speed continuous-time integrated analog signal processing (ASP) circuits because resistors, inductors, integrators, buffers, multipliers and filters can be built by OTAs and capacitors. Taking advantage of OTAs, very-high-speed voltage converters are designed in CMOS technology. These converters can work in a frequency range from DC (0Hz) up to 100MHz and higher, and keep …

Museum Committee Meeting May 1994, Tractor Museum

Lester F. Larsen Tractor Museum: Planning and Development Documents

Revised by-laws Museum Studies master student Evaluation of Building Integrity

Wright State University College Of Engineering And Computer Science Bits And Pcs Newsletter, Volume 10, Number 5, May 1994, College Of Engineering And Computer Science, Wright State University

BITs and PCs Newsletter

A twelve page newsletter created by the Wright State University College of Engineering and Computer Science that addresses the current affairs of the college.

Acuta Enews May 1994, Vol. 23, No. 5

ACUTA Newsletters

In This Issue

Board Report

President's message

VTEL goes to Russia

Video at Univ. of Missouri

DC at a glance

Takin' care of business

Fabrication Of Composite Laminates With Embedded Pizo-Ceramic Sensors And Actuators, Todd Nelson Kelsheimer

Opportunities for Undergraduate Research Experience Program (OURE)

The purpose of the research project is to investigate the methods for embedding pizo-ceramic sensors and actuators in a composite ( a fiber reinforced epoxy matrix). The importance of these sensors and actuators is vital in controlling the vibration and excessive strain on a structure causing fatigue or failure. With the control of these instabilities by the actuator, proper performance of the structure is achieved. Most sensors and actuators are surface mounted because (1) The sensor can pick up the greatest strain on the surface of a structure. (2) The actuator can create a stronger moment to counter balance the …

Nonlinear Finite Element Analysis Of Laminated Composite Beams Subjected To Harmonic Excitations Using A 20 Dof Beam Element, Mansour Nosrati Kenareh

Master's Theses - Daytona Beach

The purpose of this thesis is to study the nonlinear analysis of antisymmetrically laminated composite beams including shear deformation subjected to harmonic excitation, using a 20-degree of freedom finite element beam. The beam has 10 degrees of freedom at each node: The axial displacements, the transverse deflection due to bending and transverse shear, the twisting angle, the in-plane shear rotation, and their derivatives along the axial direction. In this study, the effect of different parameters such as damping, shear deformation and different edge conditions on the steady-state frequency-responce will be investigated. The analysis was based on the use of finite …

Nonlinear Forced Vibration Of An Unsymmetrically Laminated Composite Beam, Marie Helene Pompei

Master's Theses - Daytona Beach

The purpose of this thesis is to study the nonlinear forced vibration of an unsymmetrically laminated composite beam. Two cases are considered: unsymmetrical angle-ply and unsymmetrical cross-ply composite beams. The nonlinear governing partial differential equations of motion are obtained by taking into account the von-Karman geometrical nonlinearity. These equations are transformed into nonlinear ODE (Ordinary Differential Equations) by means of the Galerkin method. For both cases the forced Duffing equation was obtained. It is to be noted that only for the unsymmetrical cross-ply laminate simply-supported case are both quadratic and cubic nonlinearities present. The resulting equations for both cases are …

The Design Of An Augmentative Communications Device, Darren Blaser, Scott Sorenson

Undergraduate Honors Capstone Projects

There is an extremely large number of people in the modem world who have difficulty communicating. Among these are approximately 25 million people with cerebral palsy. Cerebral palsy is a disability that is usually caused during, or shortly after birth. Cerebral palsy usually affects a person's motor skills and sense of balance, often rendering them incapable of speaking clearly enough to be understood well. Because this group of people cannot communicate as effectively as other individuals, many uninformed people suppose they do not have as great a need to speak, to say things like, "How are you?", ''I'm Hungry", "Thank …

Use Of Multispectral Aerial Videography For Jurisdictional Delineation Of Wetland Areas, James A. Shoemaker

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Multispectral aerial videography was used to reproduce the jurisdictional delineation of wetland area of approximately 50 hectares in Davis County, Utah Imagery from the system consisted of three-band composite with wavelengths covering 550 nm (±10 nm), 650 nm (±10 nm), and 850 nm (±10 nm). The site was overflown at three different flight dates during the 1992 growing season (June 2, July 22, October 1). Imagery resolution varied from 0.56 m to 0.81 m. Mosaiced images were analyzed with a Supervised clustering/maximum likelihood classifier, ISODATA clustering/Euclidan classifier, statistical clustering/maximum likelihood classifier, and fuzzy c-means clustering. Overall accuracies for wetland/upland designations …

Advanced Navigation For Planetary Vehicles Applying An Approximate Mapping Technique, Timothy R. Mcjunkin

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This thesis provides a method for compressing the information provided by JPL Mars rover obstacle sensors by creating an approximate map of the terrain around the vehicle. This thesis demonstrates that this method provides adequate information for a human operator to negotiate complex obstacles fields.

By dividing the area around the vehicle into regions and classifying each region as to how dangerous (impassable), the sensor data can be accumulated with minimal overhead. The terrain in each region has a number between zero and one, with zero meaning completely passable and one meaning completely impassable. A continuum of possible values between …

Neural Network Detection Of Fatigue Crack Growth In Riveted Joints Using Acoustic Emission, Adriano F. De Almeida

Master's Theses - Daytona Beach

The purpose of this research was to demonstrate the capability of neural networks to discriminate between individual acoustic emission (AE) signals originating from crack growth and rivet rubbing (fretting) in aluminum lap joints. AE waveforms were recorded during tensile fatigue cycling of six notched and riveted 7075-T6 specimens using a broadband piezoelectric transducer and a computer interfaced oscilloscope. The source of 1,311 signals was identified based on triggering logic, amplitude relationships, and time of arrival data collected from the broad-band transducer and three additional 300 Hz resonant transducers bonded to the specimens. The power spectrum of each waveform was calculated …

Mandatory Certification Of Aviation Line Service Technicians: A Question Of Formal Or Informal Training, Jeffrey S. Lewis

Master's Theses - Daytona Beach

Accidents and incidents are created by improperly trained aviation line service technicians. To reduce accidents and incidents associated with improperly trained line service personnel, a mandatory certification plan should be developed. This study utilized the procedures established for the descriptive research method. The researcher gathered data with a self constructed questionnaire, from 72 separate sources of the 120 solicited. All relevant data was analyzed to decide if the research hypothesis could be accepted. The researcher anticipated that statistical evidence would support the research hypothesis, that structured formal training procedures would reveal a significant reduction in the number of accidents and …

Effect Of Culture Conditions, Donor Age, And Injection Site On In Vitro Development Of Dna Microinjected Porcine Zygotes, M A. Hajdu, J W. Knight, R S. Cansecot, R L. Krisher, William H. Velander, R E. Pearson, F C. Gwazdauskas

Papers in Biotechnology

A series of experiments evaluated development of porcine zygotes microinjected with DNA in three culture media and two incubation temperatures, from postpubertal and prepubertal donors, and between zygotes injected with DNA into the pronucleus and the cytoplasm. Zygotes recovered from 36 postpubertal gilts in Exp. 1 were injected and cultured in modified NCSU-23, modified NCSU-37, and CZB media at 37°C or 39°C for 7 d. In Exp. 2, zygotes were collected from postpubertal or prepubertal gilts, microinjected with DNA, and cultured in modified NCSU-23. In Exp. 3 superovulated prepubertal gilts had DNA injected into the cytoplasm or pronucleus of zygotes. …

On Issues Of Equalization With The Decorrelation Algorithm : Fast Converging Structures And Finite-Precision, Andrew James Bateman

Theses

To increase the rate of convergence of the blind, adaptive, decision feedback equalizer based on the decorrelation criterion, structures have been proposed which dramatically increase the complexity of the equalizer. The complexity of an algorithm has a direct bearing on the cost of implementing the algorithm in either hardware or software. In this thesis, more computationally efficient structures, based on the fast transversal filter and lattice algorithms, are proposed for the decorrelation algorithm which maintain the high rate of convergence of the more complex algorithms. Furthermore, the performance of the decorrelation algorithm in a finite-precision environment will be studied and …

Long-Term Effects Of Neutron Absorber And Fuel Matrix Corrosion On Criticality, William Culbreth, P. Zielinski

Mechanical Engineering Faculty Research

Proposed waste package designs will require the addition of neutron absorbing material to prevent the possibility of a sustained chain reaction occurring in the fuel in the event of water intrusion. Due to the low corrosion rates of the fuel matrix and the Zircaloy cladding, there is a possibility that the neutron absorbing material will corrode and leak from the waste container long before the subsequent release of fuel matrix material. An analysis of the release of fuel matrix and neutron absorber material based on a probabilistic model was conducted and the results were used to prepare input to KENO-V, …

The Effects Of Channel Curvature And Protusion Height On Nucleate Boiling And The Critical Heat Flux Of A Simulated Electronic Chip, John E. Leland

Office for Research Publications and Presentations

The quest for higher power yet smaller electronics has given rise to the need for very effective cooling of these electronics. Because one of the foremost problems in electronics cooling is achieving high heat flux cooling within small packages while expending minimal pumping power, one focus of this study was to investigate the effects of channel curvature on the CHF. Experimental data were obtained for flow rates of 1-7 m/s, subcoolings of 5-35"C, and radii of curvature of 25.4 and 50.8 mm. A correlation was obtained for these data which provided an excellent fit.

One condition that has been ignored …

A Three Dimensional Finite Element Thermo-Mechanical Analysis Of Intermittent Cutting, Mariam El Gallab

Archived Theses and Dissertations

No abstract provided.

Experimental Investigation On The Dynamics Of Orthogonal Metal Cutting, Yasser Mohamed Ali

Archived Theses and Dissertations

No abstract provided.

Study Of The Compressive Strength Of Multidirectional Layered Glass Polyester Laminates, Hend Ahmed Amer

Archived Theses and Dissertations

No abstract provided.

Electrical And Crystallographic Characterization Of Cdte Grown By The Vapor Transport Method, Jack L. Boone, Gene Cantwell, W. C. Harsch, J. E. Thomas, B. A. Foreman

Electrical and Computer Engineering Faculty Research & Creative Works

Crystallographic and electrical characterization techniques were performed on CdTe single crystal samples grown by the sublimation and physical vapor transport (SPVT) technique. The SPVT growth process described here has resulted in the routine growth of 45-50 mm diameter, 250-300 g boules of single crystal CdTe. As-grown material is p-type in the 5-10 ω cm range. Etch pit densities (EPD) are nominally 7x104 cm-2 along the [111] growth direction and 3x104 cm-2 along the [111] direction. X-ray full width at half maximum (FWHM) on recent samples is 8.6 arc sec compared to 8.5 arc sec theoretical. The as-grown p-type material displays …

A User-Level Process Package For Concurrent Computing, Ravi Konuru, Steve Otto, Jonathan Walpole, Robert Prouty, Jeremy Casas

Computer Science Faculty Publications and Presentations

A lightweight user-level process(ULP) package for parallel computing is described. Each ULP has its own register context, stack, data and heap space and communication with other ULPs is performed using locally synchronous, location transparent, message passing primitives. The aim of the package is to provide support for lightweight over-decomposition, optimized local communication and transparent dynamic migration. The package supports a subset of the Parallel Virtual Machine(PVM) interface[Sun90).

Fluttering Fountains: Stability Criteria, Lee W. Casperson

Electrical and Computer Engineering Faculty Publications and Presentations

The fluttering oscillations that have long been seen in falling sheets of water have recently been subjected to detailed theoretical analysis. In this study stability criteria for these oscillations are derived and discussed. These criteria provide insight into the physical mechanisms of the instability and may be employed in the design of fluttering waterfall systems.

High Resolution Liquid Crystal Phase Grating Formed By Fringing Fields From Interdigitated Electrodes, Gregory P. Nordin, M. Friends, J. M. Jarem, S. T. Kowel, J. H. Kulick, T. Leslie, R. G. Lindquist

Faculty Publications

We report the formation of thin anisotropic phase gratings in a nematic liquid-crystalline film by use of lateral (fringing) electric fields induced by transparent interdigitated electrodes. These gratings yield high diffraction efficiency (>30%) with a strong dependence on the readout beam incidence angle. In addition, the formation of a defect wall is observed that has a significant effect on the diffraction properties of the phase grating.

The Reduction Of Dielectric Constant By Shaped Porosity, Weiping Cai

Opportunities for Undergraduate Research Experience Program (OURE)

In multi-layer circuits, the reduction of the dielectric constant in substrate materials is becoming increasingly important, as the heat emission of the circuits increases with an increasing number of layers. One way to achieve a lower dielectric constant is to create porosity in the material. In this project, two types of substrate samples were made with coin-shaped porosity. One had holes of 8.0mm in diameter, and the other had holes of 2.5mm in diameter. The total vacuum area was 250mm², or 7.7% of the total area, in either case. It was hoped to discover a relationship between aspect …

Fixed Site Facilitated Transport Of Oxygen And Nitrogen Through Plasma Polymer Films, Chad Dunnegan

Opportunities for Undergraduate Research Experience Program (OURE)

A method of preparing plasma polymer films, in which metal chelate molecules are incorporated, is briefly outlined. The chemical reactivity of metal chelate molecules is preserved so that they may ”facilitate” the transport of oxygen molecules through the membrane. The method for testing permeability of the films is presented and results are analyzed with respect to the dual mode sorption model, applied to fixed site facilitated transport.

Skin Effects Due To Perforations -- A Study Of Analysis Techniques, Jon Michael Gibbs

Opportunities for Undergraduate Research Experience Program (OURE)

Until 1991, two methods could be used to evaluate the skin effect due to perforations, the Brons and Marting Method and the Harris Method. Due to the simplicity of the technique, the Brons and Marting Method has been the preferred method of use in the petroleum industry. However, with the recent development of a third technique to evaluate the skin effect due to perforations, the need has arisen to evaluate each of these techniques to determine which method is the most accurate under given conditions. This paper reviews and compares each of the three methods for evaluating the perforations skin. …

Solubility Of Red Phosphorous In Lead, Sean E. Walker

Opportunities for Undergraduate Research Experience Program (OURE)

The determination of the solubility of red phosphorus in lead can be used to produce a plot of the solubility with respect to temperature and pressure. The plot is produced with experimental data, activity determination from present thermodynamic data, and compilation of the two sets of data into the semi-regular solution format. A lead-phosphorus solubility diagram is necessary to determine the amount phosphorus that will be absorbed by lead and will remain unreacted in a given process.

The Development Of Equipment Specification Form From The Pdxi Data Models, Justin M. Juengel

Opportunities for Undergraduate Research Experience Program (OURE)

The project has culminated in the development of a simplistic working model, based upon the existing data model created by the Process Data Exchange Institute (PDXI). This data model is depicted in Volume 1 of the deliverables for the PDXI Data File Interchange Format Project. The working model, based in part on the Planning Level Model and the Heat Transfer Model [1] of the overall data model, was then used to create an equipment specification form (Fig 1) for a heat exchanger, partially utilizing the standards set forth by the Tubular Exchanger Manufacturers Association (TEMA).