Engineering Commons^™

Assessment Of Non-Mechanical Thermo-Syphon Solar Pump, Tarek Hassan Selim

Archived Theses and Dissertations

No abstract provided.

Design Approach For Small Scale Continuous, Steady State Plants, O Kaunde

Tanzania Journal of Engineering and Technology (TJET)

One of the major steps in the design of a process plant is development of an appiopriate flowsheet. At this step, the technical solutions may be con- sidered in relation to the social and economic factors. In this paper, guide- lines for developing a flowsheet for continuous, steady State process in a developing country environment have been proposed. To illustrate the pro- posed guidelines, a case study involving design of an ethanol distillation plant has been used.

Experimental Investigation On The Use Of Native Biomass As Biosorbents For Metal Pollutant Removal, R Litto

Tanzania Journal of Engineering and Technology (TJET)

Waste water treatment is a perrnunent task. Many novel techniques have emerge in recent years and one of them is using biomass in removing heavy- metals. In this research screening and preliminary optimization experi- ments have identified different types of abundant biomass which can accu- mulate heavy metals such as Fe3*, C03•, Cu2+ and ftvm effluent. Cystoseira Myrica has a high uptake ofCr3+ while Sargassum Polycystum has been found to have a high uptake 0fFe3+. Observed biosorption kinet- ics shows rapid initial stage, followed by slower second stage and the amount of material adsorbed increases linearly as its concentration in …

Improved Heat Transfer By Means Of Steam Injection In A Shell & Tube Heat Exchanger, O Kaunde

Tanzania Journal of Engineering and Technology (TJET)

When designing a heat exchanger; one aims at attaining high heat transfer rates SO as to minimise heat transfer area and therefore the overall cost. This paper presents a method of improving the overall heat travsfer coef- ficient of a conventional shell and tube heal exchanger. The method in- volves injecting steam into the process fluid as it enters the heat exchanger thus effecting mixing of fluid as it travels along the exchanger Tests car- • ried out using this technique showed a significant increase in the overall heat transfer coefficient values.

Model For Complete Drawdown Of Floating Solids In Stirred Tank Reactors, J Mmbaga

Tanzania Journal of Engineering and Technology (TJET)

A Semi-empirical model has been developed on the basis of Kolmogoroff's theory of isotropic turbulence to determine the minimum drawdown speed for floating solids in a mechanically agitated vessel. An adjustable pa- rameter in the model is found to be afunction of impeller type and position in a vessel. A simplified representation of macroscopicflow pattern, rep- resenting the circulation flow in a vessel depending on impeller pumping characteristic is developed to account for recirculation pattern.

A Fracture Kinetics Analysis Of Hydrogen Embrwi'lement, J Mshana

Tanzania Journal of Engineering and Technology (TJET)

In studies on stress corrosion cracking caused by hydrogen embrittlement of metals, it has been observed that within the high remperature range rhe Armenius activation energy is negative. This is quite unusual Since ther- mall)' activated crack g.'vwth processes are controlled by positive appar- ent activation energy. The unders/auding of this effect is of inleavst to design and maintenance engineers. The study demonstrates, with a syn- thesis method, a physically rigorous and rational kinetics Of thermally activated processes of some aspects ofenvironment assisted crack growth. It is show that the observed crack growth behavior may be described by single barrier …

Measurement Of Dust Resistivity And The Effect Of Filter Operating Parameters On Its Value, S Issangya

Tanzania Journal of Engineering and Technology (TJET)

Methods of measuring electrical sensitivity of a dust layer have been outlined and the porous electrodes cell was used to measure the electrical resistivity of a dust layer and to determine the influence of various parameters. Dust layer thickness and applied voltage had no influence. Resistivity depended on particle size, packing density, temperature, and air relative humidity. Glass beads and limestone powders of different mean particle sizes were used. Temperature was varied from 20–100 °C and air moisture ranged from dry to near saturation. The results may help in understanding the performance of electrically enhanced fabric filters, which are influenced …

Solar Heater For Curing Tobacco Part I: Overview And Theory, J John

Tanzania Journal of Engineering and Technology (TJET)

This is two parl paper. In part one of the papet; an overview on the use Of packed beds on heat collectors To be used in natural convection systems is presented. A brief theoretical background and literature review has also been presented. Theoretical analysis and performance equations are pre- sented in detail. Two zypes of absorbers are proposed for investigation. The firs,' one will be with flow below the absorber and the other with flow "'through " {he absorber. These shall be compared with the conventional flat plate collector. For comparing the performance, packings of different materials, shapes, and sizes …

Evaluation Of The Influence Of The Magnetic System In Relays, D Chambega

Tanzania Journal of Engineering and Technology (TJET)

The paper evaluates the influence of different cores on the performance of relays. In particular two types ofc-cores, all made from IOW quality mag- netic steel, are considered. The two cores, one butt-constructed and the other interleaved, are mathematically modelled and the tesults are analyzed and obtained experimentally. Then the two sets of results are compared with those ofa c-shaped core of excellent magnetic material with the aim of qualifying the influence of the core material. It is observed that the method of constructing the core also influences the performance.

Power Shedding Experiences And Lessons In A Township, Alexander Kyaruzi

Tanzania Journal of Engineering and Technology (TJET)

This paper presents how power shedding by taking out one of the trans- former high voltage fuses causes phase imbalance. And for the same elec- nicc,l energy output generator fuel consuntption with unbalanced phases is 12.5% of The fuel consunwtion with balanced phases. Furthermore it is shown thal energy efficient lighting by use of energy efficient bulbs can reduce load shedding.

Polymer Supported Z-N Catalysts For C2h4-Polymerization,I: Development Catalyst Preparation Method, S Mteza

Tanzania Journal of Engineering and Technology (TJET)

Substantial improvement of low sensitivity pressure transducers aiming at obtaining a more realistic output signal is discussed. The output signal direct from these transducers has deficiencies of amplitude attenuation and phase lag, thus the measured values are not necessarily the true in- stantaneous values. In order to correct for such shortcomings the unit step response of these transducers is also studied experimentally. A math- ematical model is established based on the experimental results to build up a compensation circuit which is then included in the instrumentation setup to eliminate these deficiencies. The effectiveness of the compensated transducer is demonstrated by …

Application Of Improved Pressure Transducers For Pressure Measurements, P Mtui

Tanzania Journal of Engineering and Technology (TJET)

Substantial improvement of low sensitivity pressure transducers aiming at obtaining a more realistic output signal is discussed. The output signal direct from these transducers has deficiencies of amplitude attenuation and phase lag, thus the measured values are not necessarily the true in- stantaneous values. In order to correct for such shortcomings the unit step response of these transducers is also studied experimentally. A math- ematical model is established based on the experimental results to build up a compensation circuit which is then included in the instrumentation setup to eliminate these deficiencies. The effectiveness of the compensated transducer is demonstrated by …

Influence Of Arc Discharge Duration On Turbulent Mass Burning Rate, E Mushi

Tanzania Journal of Engineering and Technology (TJET)

The influence of arc discharge duration on turbulent mass burning rate was investigated for turbulent r.m.s vglocities of u '=1.73 m/s and u'=4.5 nfs. Methane air mixtures were used at equivalence ratios ranging from 0.83 to / .25. Flame size was obtained through schiieren photography while the intensity Of CH chemiluminescence emissions was used to measure mass burning rate. A variable spark duration unit was used for ignition sparks and all the experiments were done in a fan stirred bomb. Discharge duration has no effect when the equivalence ratio is I. For higher values longer duration inoeases the burning rate …

Optimum Geometrical Parameters For Prismatic Folded Plate Roofs: System- Atic Search Approach, N Mwitta

Tanzania Journal of Engineering and Technology (TJET)

Folded plate structures have unique structural advantages over conven- nonal beam-and-slab structural forms. Selection of optimum geometrical parameters in design would make folded plate roofs more appealing to the national construction industry in terms ofcost. This paper presents a study on shape optimization of prismatic folded plate roofs for minimum weight of the structure per unit covered area. A computer based systematic search approach has been employed.for the optimization study, while the tranyeer matrix method has been used for analysis. Curves opriinum geometrical parameters versus span have been pre sented for three commonly used shapes of prismatic folded plate roofs. …

Mat Forming Apparatus, Bernard C. H. Sun

Michigan Tech Patents

Mat forming apparatus comprising, in combination, a hollow material transporting member, drive structure for producing a pressure differential across spaced portions of the transporting member so that material is propelled from one of the spaced portions to the other within the hollow transporting member, material directing structure communicating with the drive structure for receiving material from the hollow transporting structure and, responsive to the drive structure, operative to direct the received material in a predetermined path, the hollow transporting member having a non-linear inner surface so that flow in the hollow transporting member is turbulent causing the material being transported …

Vortex Lattice Symmetry And Electronic Structure In Yba2cu3o7, Bernhard Keimer, Wan Y. Shih, Ross W. Erwin, Jeffrey W. Lynn, Fatih Dogan, Ilhan A. Aksay

Materials Science and Engineering Faculty Research & Creative Works

We report a small angle neutron scattering study of the vortex lattice in YBa₂Cu₃O₇ in magnetic fields of 0.5≤ H ≤5 T applied along and close to the c axis. Over the entire field range, the vortices form an oblique lattice with two nearly equal lattice constants and an angle of 73° between primitive vectors. Numerical calculations suggest that variations of the superconducting order parameter near the vortex core are important in stabilizing this structure. An analysis that accounts for the fourfold symmetry of the vortex core qualitatively explains both the symmetry and the orientation …

Impact Of Nuclear Rocket Engine Design On Control Strategies, John A. Lambright

Nuclear Engineering ETDs

In a nuclear thermal rocket engine, the propellant gas can be varied independent of the peak chamber temperature. Startup and shutdown times can be varied over a wide range due to this uncoupling of the energy source from the working fluid. Therefore, in the early stages of nuclear rocket engine development. a study of the impact of the engine design on control strategies and systems was conducted. In order to define what is required in terms of engine thrusting times. this study focused on the thrust requirements for a Reusable Orbital Transfer Vehicle (R0TV).

Three nuclear rocket designs were used …

Agglomarate Formation During Drying Of Fine Powders, Alok Maskara

Nuclear Engineering ETDs

The effect of capillary pressure, solubility, and surface chemistry on agglomeration of silica and titania particles during drying was studied. Three batches of silica particles with diameter between 15 and 500 nm as well as titania particles with nominal diameter of 30 nm were used. Drying rate was varied by using both tray drying and spray drying. Aprotic solvents ranging in surface tension from 18 dynes/cm (hexane) to 72 dynes/cm (water), and mixtures of water/propanol and water/butanol ranging in surface tension from 35 dynes/cm to 72 dynes/cm, were used to vary the surface tension of the solvent. Water between pH …

Will It Fly? A Computer-Based Aircraft Design Tool, Eric G. Woodfin

Honors Capstone Projects and Theses

No abstract provided.

Multicriteria Mission Route Planning Using A Parallel A* Search, Michael S. Gudaitis

Theses and Dissertations

The Mission Route Planning (MRP) Problem falls into the general class of multicriteria path search problems. Multiple criteria are evaluated to select an optimal aircraft mission route through a hostile environment. Criteria for distance travelled and radar exposure are combined into a single cost function for route evaluation. Radar calculations are performed dynamically. The A* search algorithm is applied to the MRP problem, and a parallel implementation is developed and tested. A unique combination of distributed OPEN lists with a global CLOSED list strategy produced fast execution times on the Paragon. Test cases for scenarios with 15 radars took less …

United States Patent: Ellipsometer, John A. Woollam, Blaine D. Johs, David W. Doerr, Reed A. Christenson

Department of Electrical and Computer Engineering: Faculty Publications

To sense characteristics of a sample, an ellipsometer includes a pivotal diffraction grating positioned to receive white light from the analyzer without further focusing of the light after the light leaves the sample. The diffraction grating is focused on the sensor at a predetermined angle with a precision of at least plus or minus one-half degree using an alignment-sensing means positioned between the analyzer and diffraction grating. The sensor includes an aperture through which the incident beam of light is transmitted, light-sensitive areas on opposite sides of said sensor and a comparator for comparing the signal from said light-sensitive areas. …

On Modeling Of A Mobile Multipath Fading Channel, Heng Xiao

Dissertations and Theses

Multipath fading is one of the major practical concerns in wireless communications. A multipath transmission takes place when a transmitted signal arrives at a receiver by two or more paths of different delay. Such multiple paths may be due to atmospheric reflection or refraction, or reflections from buildings or other objects. A multipath fading channel is usually modeled as a time-variant tapped delay system. RAKE receiver can be used to detect the signal from the multipath fading channel. However, the number of delay taps, the time delay of each path, and the tap weight for each delay path need to …

Methodology For Accurate Speedup Prediction, Aruna Chittor

Dissertations and Theses

The effective use of computational resources requires a good understanding of parallel architectures and algorithms. The effect of the parallel architecture and also the parallel application on the performance of the parallel systems becomes more complex with increasing numbers of processors. We will address this issue in this thesis, and develop a methodology to predict the overall execution time of a parallel application as a function of the system and problem size by combining simple analysis with a few experimental results. We show that runtimes and speedup can be predicted more accurately by analyzing the functional forms of the sequential …

Radiative Transfer Of Ultrasound, Joseph A. Turner, Richard L. Weaver

Department of Engineering Mechanics: Faculty Publications

A radiative transfer equation is used to model the diffuse multiple scattering of ultrasound in a medium containing discrete random scatterers. An assumption of uncorrelated phases allows one to write an equation of energy balance for the diffuse intensity. This ultrasonic radiative transfer equation contains single-scattering and propagation parameters that are calculated using the elastic wave equation. Polarization effects are included through the introduction of an elastodynamic Stokes vector which contains a longitudinal Stokes parameter and four shear Stokes parameters similar to the four Stokes parameters used in optical radiative transfer theory. The theory is applied to a statistically homogeneous, …

Predicting Solute Transport In Natural Streams - A Stochastic Approach, Xueqing Zhou

Dissertations and Theses

The existing theories for predicting longitudinal dispersion in straight open channels have long been recognized as inadequate when applied to natural rivers. These theories tend to grossly underestimate dispersion in real streams since an important mixing mechanism due to nonuniform river cross-section variations is not explicitly taken into account. Recognizing the important role of stream irregularities on solute transport and the analytical difficulties of classical deterministic analysis, we develop a stochastic approach for analyzing solute transport in natural streams. Variations in river width and bed elevation are conveniently represented as one-dimensional random fields, characterized by their autocorrelation functions. Advection and …

Wright State University College Of Engineering And Computer Science Bits And Pcs Newsletter, Volume 10, Number 10, December 1994, College Of Engineering And Computer Science, Wright State University

BITs and PCs Newsletter

A fourteen page newsletter created by the Wright State University College of Engineering and Computer Science that addresses the current affairs of the college.

Travelling Wave Electrode Optimization For High Speed Electro-Optic Modulators Using The Fourier Series Method, W. Boyu, X. Guangjun, Xiaomin Jin

Electrical Engineering

The performance of Z-cut Mach-Zehnder high speed LiNbO₃ amplitude modulators with a CPW traveling wave electrode, has been analyzed and optimally designed in detail by the Fourier series method. The effect of electrode and buffer layer thickness on the electric field distribution in the substract, effective micro- wave refractive index and characteristic impedance of CPW electrode, are discussed. Calculation shows that increasing the thickness of the electrode and SiO₂ buffer layer can improve the phase velocity mismatch between electric and optical waves, and the drive power required by the modulator with thin buffer layer and thick electrode is …

A Guide To Floodplain Cattle Fencing, Department Of Agriculture, Western Australia, Main Roads, Western Australia

Animal production and livestock published reports

A seminar and workshop was held at Fitzroy Crossing in October 1993 to address the consequences of flooding to landholders and communities.

Damage to flood plain fencing was identified as one of the major concerns to landholders.

An outcome from the workshop was the decision to draw on local knowledge and collate information on options for fence and floodgate designs.

This information was to be made available to land holders and other interested parties - hence this publication.

In Vitro Activities Of 2,2'-Bipyridyl Analogs Against Mycobacterium Leprae, Arvind Madhav Dhople, Maria Antonia Ibáñez, Anita A. Dhople

Biomedical Engineering and Sciences Faculty Publications

In vitro susceptibility of Mycobacterium leprae to two bipyridyl analogs was studied by using two biochemical parameters to measure the metabolic activity of the organism. VUF-8514 at 0.16 μg/ml, but not VUF-8842, completely inhibited the metabolic activity of M. leprae, and the action was bactericidal. When compared to rifampin (MIC 0.3 μg/ml), VUF-8514 was equally bactericidal against M. leprae.

The Effects Of The Proposed Larger Aircraft On Airport Capacity In The United States, Kerwin S. Mckenzie

Master's Theses - Daytona Beach

The problem of c is one that has been around for some time. With air travel projected to increase into the year 2000, Airbus Industrie, Boeing Corporation and McDonnell Douglas are making plans or are in the process of building large transports. Airbus has built the A340/A330 and is planning the now named A3XX, a 600 plus seater. Boeing is currently flying the 747-400 which holds up to 570 passengers. In addition, Boeing rolled out the 777 in June 1994, which holds up to 550 passengers. Douglas is planning the MD-12 with a 700 plus passenger load. The purpose of …