Engineering Commons^™

Optical Bone Chambers As Tools For Studying The Bone-Implant Interface: A Review, Howard Winet

Cells and Materials

Bone chamber intravital microscopy combines the control volume of in vitro models and the chemical complexity of in vivo models to optimize the study of bone physiology in situ. As an optical tool it provides a window to dynamic events at the tissue level of magnification. In particular, it allows measures of microvascular events: (1) in space by magnifying local perfused vasculature and microcirculation at any instant, and (2) in time by providing the same volume of tissue for weekly viewing of an evolving process such as bone healing. This quartz-bearing titanium screw has revealed a consistent order for …

Co-Culture Of Endothelial Cells And Smooth Muscle Cells In A Flow Environment: An Improved Culture Model Of The Vascular Wall?, Thierry Ziegler, Keith A. Robinson, R. Wayne Alexander, Robert M. Nerem

Cells and Materials

Numerous studies have demonstrated that the neighboring smooth muscle cells (SMC) influence the morphology, cytoskeleton and growth of co-cultured endothelial cells (EC). Also, flow-induced laminar shear stress has been shown to induce cell elongation, F-actin reorganization and growth inhibition in cultured EC. We investigated the effect of neighboring SMC and collagen matrix on the response of EC to shear stress. The co-culture system was made by growing porcine aortic SMC in a gel of collagen type I and then seeding porcine aortic EC (P AEC) on the top surface. Then the co-culture was exposed to steady, laminar shear stress of …

Bone Absorptiometry In Metabolic Bone Disease: Baseline Values And Long-Term Treatment With Calcitriol (Post-Menopausal Osteoporosis Versus Osteomalacia), A. Caniggia, B. Frediani

Cells and Materials

Total body bone absorptiometry reveals low mineral density in both postmenopausal osteoporosis and osteomalacia patients. The method was used to investigate the effect of calcitriol administration on patients suffering from one of these conditions. In osteomalacia, the administration of calcitriol resulted in a dramatic improvement in bone mineral density (sometimes up to 50% in 12 months), indicating the rapid mineralization of previously uncalcified bone tissue as a result of the normalization of the Ca x P product. In osteoporosis a similar treatment was seen to halt the progressive decrease in bone mineral levels and sometimes resulted in minor increases in …

Scanning Electron Microscopy Studies Of Ceramic Layers And Interfacial Regions For Calcium Phosphate-Coated Titanium Dental Implants, W. A. Brantley, E. Tufecki, J. C. Mitchell, D. W. Foreman, E. A. Mcglumphy

Cells and Materials

The surface and cross-section characteristics of the plasma-sprayed calcium phosphate coatings, along with the microstructures and elemental compositions near the titanium alloy interface, were investigated by scanning electron microscopy for two different dental implants of proprietary compositions: Integra!® (Calcitek) and BioVent ® (Dentsply). Elemental concentrations (Ca, P, Ti, AI, and V) near the interfaces were obtained by X-ray energy-dispersive spectroscopy. Coating surfaces exhibited a splat deposition topography of greatly differing microstructural scale for the two implants, along with other features characteristic of the plasma-spraying process; cross-sections of the coatings revealed minimal porosity. Some interdiffusion of principally titanium and calcium was …

Some Biological And Physical Properties Of Laser Deposited Hydroxyapatite Based Films, Tatjana Dostalova, Lucie Himmlova, Miroslav Jelinek, Jirina Bartova

Cells and Materials

The preliminary results of biological and physical tests of hydroxyapatite thin films deposited on dental implants by a new technology with the KrF excimer laser ablation method were evaluated. Biological and physical properties were studied and analyzed by the lymphocyte proliferation test and scanning electron microscopy (SEM), X-ray analysis, Rutherford backscattering analysis (RBS) and particle induced X-ray emission (PIXE) methods. Ten bioceramic films from 45 samples had very good physical and biological properties. Creation of hydroxyapatite thin films with laser ablation can have a positive effect on adhesion of the film and protection for corrosion.

Some Observations On The Structure Of Encrusting Biofilms Of Proteus Mirabilis On Urethral Catheters, C. Winters, D. J. Stickler, N. S. Howe, T. J. Williams, N. Wilkinson, C. J. Buckley

Cells and Materials

A physical model of the bladder has been used to study the process of urinary catheter encrustation. Techniques have been devised for the preparation of sections through these encrustations in situ on the luminal surfaces of catheters and for mapping the distribution of calcium and magnesium in the biofilms. Transmission electron microscopy on these sections showed struvite-like crystals lying in the matrix and in direct contact with the catheter surface. Calcium phosphate ("bioapatite") was distributed throughout the film and many of these amorphous particles appear to have cells at their cores. Freeze-substituted sections of biofilms also showed electron dense materials …

Random Roughness Assessment By The Pin And Chain Method, John E. Gilley, E. R. Kottwitz

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Surface microrelief is frequently characterized using random roughness factors (RRF) defined by Allmaras et al. (1966). Random roughness factors are usually measured using a pin roughness meter or laser. Saleh (1993) recently proposed the chain method as a relatively simple, fast, and inexpensive technique for characterizing surface microrelief. The chain method is based on the principle that as a chain of given length is placed across a surface, the horizontal distance covered by the chain will decrease as surface roughness increases. Reductions in chain length caused by surface roughness are described as Saleh roughness factors (SRF).
In this study, RRF …

Soy Protein Isolate/Poly(Ethylene Oxide) Films, V. M. Ghorpade, A. Gennadios, M. A. Hanna, Curtis L. Weller

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Films were prepared by casting and drying alkaline aqueous film-forming solutions of soy protein isolate (SPI). Four additional types of films were made by combining SPI with poly(ethylene oxide) (PEO) in SPI to PEO ratios of 19:1, 9:1, 4:1, and 1.5:1 (w/w). Glycerin was added to all film-forming solutions as a plasticizer at 60% of total solid weight. Addition of PEO decreased film tensile strength (TS) and increased elongation at break (E). TS values ranged from 1.4 to 3.9 MPa and E values ranged from 83 to 152%. Water vapor permeability of the films ranged from 3.0 x 10^{-9 …}

Thermomechanical Behavior Of Wheat Gluten Films: Effect Of Sucrose, Glycerin, And Sorbitol, George Cherian, Aristippos Gennadios, Curtis L. Weller, Pavinee Chinachoti

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Glass transition temperature (T_g) and mechanical and water vapor barrier properties of wheat gluten films containing glycerin, sucrose, glycerin-sucrose, and glycerin-sorbitol were studied. Glycerin and sucrose were immiscible; the wheat gluten film containing both solutes showed two separate thermal transitions (-58°C and -5°C, respectively). The low temperature (low-T) transition (-58°C) was due to a glycerin-rich region. The low-T tan δ peak height influenced the tensile strength and elongation linearly and the water vapor permeability (WVP) curvilinearly. However, the T_g failed to change with solute composition and exhibited low correlation with barrier and mechanical …

Darcy-Weisbach Roughness Coefficients For Surfaces With Residue And Gravel Cover, John E. Gilley, Eugene R. Kottwitz

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Several types of hydraulic resistance factors may be present on upland agricultural areas. It is not known whether roughness contributions from individual elements are additive or if interactions between resistance factors may occur. In this study, Darcy-Weisbach roughness coefficients were measured on surfaces containing corn-soybeans, sorghum-cotton, and sunflower-wheat residue in addition to gravel cover. Varying rates of flow were introduced into a flume in which residue and gravel materials were securely attached. Roughness coefficients were calculated from measurements of discharge rate and flow velocity for Reynolds number values varying from approximately 1,200 to 13,000. The laboratory data were then used …

Auger Design For Uniform Unloading Of Granular Material: I. Rectangular Cross-Section Containers, David D. Jones, Michael F. Kocher

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Design equations were developed for two auger configurations that for practical purposes generate uniform vertical flow of granular material through containers or boxes having a rectangular cross-section. Both configurations have uniform outside diameters so the simple geometry of the conventional U-trough housings could be used with these augers. One configuration had a uniform pitch for the auger flighting and decreasing inside diameter. The other had a uniform inside diameter and a decreasing pitch of the flighting with distance from the outlet end of the auger. Both configurations dramatically improved the uniformity of flow over the conventional auger. However, confidence intervals …

Corn Residue Cover On The Soil Surface After Planting For Various Tillage And Planting Systems, David P. Shelton, Elbert C. Dickey, Stephen D. Kachman, K.T. Fairbanks

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Crop residue left on the soil surface after planting is one of the most cost-effective soil erosion control practices, and is a primary component of the majority of conservation plan that have been developed to comply with the conservation provisions of the 1985 Food Security Act. However, from contacts in Extension meetings and demonstrations, it became apparent that formers frequently misunderstood certain aspects of crop residue management, particularly the effects that tillage and other operations had on residue cover. To help address some of these questions, we measured percent residue cover remaining on the soil surface after planting for 69 …

Development Of A Desuperheater Rating Method For Energy Code Calculations, Tim Merrigan

Retrospective Theses and Dissertations

The purpose of this project was to develop a rating method for desuperheater water heaters – heat exchangers that remove superheat from the refrigerant in an air conditioner’s compressor discharge line. The project methodology was to first determine the overall heat transfer coefficient-area product (UA) of the heat exchanger for three basic types of desuperheaters. Both heat transfer analysis and the laboratory performance data indicated that the number of transfer units (NTU) for each heat exchanger was relatively independent of the operating conditions for a properly-charged air conditioner with a single-speed compressor and a desuperheater with a single-speed circulating pump. …

Finite Impulse Response Utilizing The Principles Of Superposition, Scott Edward Carter

Retrospective Theses and Dissertations

Window functions have been greatly utilized in the synthesis of finite impulse response (FIR) filters implemented using surface acoustic wave (SAW) devices. The critical parameter in any FIR design in the impulse response length, which must be optimized for the given design specifications in order to reduce the size of each device. To this end, many design algorithms have been introduced such as Remez exchange, linear programming, and least mean squares. A new algorithm has been derived which is efficient and accurate for the design of arbitrary filter specifications requiring less computations than the current algorithms. The FIR design is …

Flow Diagnostics, Chemically Reacting Turbulent Flow Modeling And Turbulent Mixing : A Summary Of Project Studies In Combustion, Bahman Ghorashi

Scholarship Collection

No abstract provided.

Enhanced 911 Service In A Private Branch Exchange Using Uswest Ps/Ali Service

ACUTA: Other Publications

In This Issue

Author

Introduction

EP11 Operation Overview

US West Communications E911 Private Switch/Automatic Location

Identification Feature

Implementation of E911 with PS/ALI At Colorado State University

Overview

Planning ALI Database Input

SL- 100 PBX Database and Trunking

Pre-Testing

Other Issues and Difficulties

Cost

Conclusion

Addendum A

Addendum B

Effectiveness Of Vegetative Filter Strips In Controlling Losses Of Surface-Applied Poultry Litter Constituents, Indrajeet Chaubey, Dwayne R. Edwards, Tommy C. Daniel, Philip A. Moore Jr., D. Jeff Nichols

Biosystems and Agricultural Engineering Faculty Publications

Vegetative filter strips (VFS) have been shown to have high potential for reducing nonpoint source pollution from cultivated agricultural source areas, but information from uncultivated source areas amended with poultry litter is limited. Simulated rainfall was used in analyzing effects of VFS length (0, 3.1, 6.1, 9.2, 15.2, and 21.4 m) on quality of runoff from fescue (Festuca arundinacea Schreb.) plots (1.5 x 24.4 m) amended with poultry litter (5 Mg/ha). The VFS reduced mass transport of ammonia-nitrogen (NH₃-N), total Kjeldahl nitrogen (TKN), ortho-phosphorus (PO₄-P), total phosphorus (TP), chemical oxygen demand (COD), and total suspended …

Atrazine And Alachlor Dissipation Rates From Field Experiments, Stephen R. Workman, Andrew D. Ward, Norman R. Fausey, Sue E. Nokes

Biosystems and Agricultural Engineering Faculty Publications

Chemical transport is being monitored in the root zone of three agricultural management systems at the Ohio Management Systems Evaluation Area (OMSEA). Atrazine and alachlor concentration data from soil cores taken to a depth of 0.9 m and partitioned into the increments of 0.0 to 0.15, 0.15 to 0.3, 0.45 to 0.6, and 0.75 to 0.9 m show the herbicides remained in the top 0.15 m of the profile during the 1991 and 1992 growing seasons. The slow movement of herbicides was partly due to below normal rainfall during the period. Since the herbicides have not been transported out of …

Flood Gates For Agricultural Fences, Larry W. Turner

Agricultural Engineering Extension Updates

Flood gates are needed wherever fences cross ditches, gullies, and streams. They prevent livestock from swimming or crawling under the fence, and prevent debris from forming a dam that might wash out the fence or back up water to flood fields or other property.

Safe Movement Of Farm Equipment On Public Roads, Larry R. Piercy

Agricultural Engineering Extension Updates

The increasing size of farming operations brings with it an increased movement of equipment on the road. As road travel increases so does the potential for serious highway accidents. The most frequent accidents are collisions with other motor vehicles and loss of control which often leads to tractor over-turns. As an operator of farm equipment, your use of the proper safety equipment and good driving practices will greatly reduce the risk of an accident.

Program Guide: Fire Extinguishers: Protection For The Home And Farm, Larry R. Piercy

Agricultural Engineering Extension Updates

The right kind of fire extinguisher conveniently located and properly used can greatly reduce the potential losses from a fire. However, the user must have a knowledge of the common types of extinguishers, the types of fires for which they are safe and effective and the proper operating procedures.

Program Guide: Smoke Detectors Can Save Your Life, Larry R. Piercy

Agricultural Engineering Extension Updates

Smoke detectors have the potential of greatly reducing the number of deaths resulting from home fires and at a very reasonable cost to the consumer. Yet some homes still do not have smoke detectors installed or do not have a sufficient number to provide a minimum level of protection.

Program Guide: A Home Fire Escape Plan, Larry R. Piercy

Agricultural Engineering Extension Updates

A home fire escape plan and regular practice with fire exit drills are essential for protecting a family from the potential disaster of a home fire. When a fire occurs, it is critical that everybody knows what to do, and through practice they have the know-how and confidence to do it.

Applicability Of Modified Diercks Equation With Nrim Data, Tarun Goswami

Biomedical, Industrial & Human Factors Engineering Faculty Publications

The applicability of the modified Diercks equation (MDE) was assessed with elevated temperature low cycle fatigue (ETLCF) data generated by the National Research Institute for Metals (NRIM) for lCr-Mo-V, 1.25Cr-Mo, 2.25Cr-Mo and 9Cr-lMo steels respectively. The modified Diercks equation was assessed with data generated with symmetrical, slow-fast and hold-time waveforms for low alloy steels. The following characteristics were observed: Symmetrical waveforms: Five strain rates were used with these waveforms where predicted life was by a factor of ± x2 for 77%, 87%, 82% and 92% of data points for lCr-Mo-V, 1.25Cr-Mo, 2.25Cr-Mo and 9CrlMo steels respectively. Slow-fast waveforms: Diercks equation …

Creep Fatigue, Part Ii: Creep Fatigue Life Prediction: Methods And Trends, Tarun Goswami

Biomedical, Industrial & Human Factors Engineering Faculty Publications

Creep-fatigue data of low allow steels were compiled from international sources, and trends in creep-fatigue behavior were identified in Paper I. This paper reviews the methods of creep-fatigue life prediction that were assessed from the compiled data. The methods reviewed in this paper are phenomenological in nature. However, an empirical method has also been discussed which offers very high reliability of the prediction capability. Various test requirements, from which material parameters are determined for each method, have been tabulated. No single method has been generalized as a best method of life prediction for all types of creep-fatigue test conditions.

Creep Fatigue, Part I: Compilation Of Data And Trends In The Creep-Fatigue Behavior Of Low Alloy Steels, Tarun Goswami

Biomedical, Industrial & Human Factors Engineering Faculty Publications

This paper describes an attempt to compile the creep-fatigue data of low alloy steels. In part I, international data have been collected to compare the variability that exists in a particular low alloy steel when characterized in different laboratories. From this work of compilation, trends in the creep-fatigue behavior of low alloy steels have been identified in Part II of this paper and a review of life prediction methods and assessments will be discussed in subsequent papers. The creep-fatigue behavior, in general, improved with the increase in chromium content; however, when additional alloying elements were added to a standard alloy …

Vehicle Maintenance Pollution Prevention, University Of Northern Iowa. Small Business Pollution Prevention Center.

Iowa Waste Reduction Center Book Gallery

Pollution prevention can be defined as: "The use of materials, processes, or practices that reduces or eliminates the creation of pollutants or wastes at the source.” (EPA) Pollution prevention represents a shift away from the old school of thought, “pollution control,” in which waste was not dealt with until after it was generated. Through pollution prevention, we look at the processes that generate the waste to see if we can avoid creating a waste in the first place, or at least reduce the hazardous nature of the waste. When this is not possible, the next best solution to prevent wastes …

Transient Data Sharing Among Mobile Programs, Jerome Plun, Gruia-Catalin Roman

All Computer Science and Engineering Research

Mobile computing represents a major point of departure from the traditional distributed computing paradigm. The potentially very large number of independent computing units, a decoupled computing style, frequent disconnections, continuous position changes, and the location-dependent nature of the behavior and communication patterns present designers with unprecedented challenges in the areas of modularity and dependability. This paper describes a modular approach to specifying and reasoning about of mobile computing. Its novelty rests with the notion of allowing transient (location-dependent) data sharing among programs which move in space. The notation is a direct extension of that used in UNITY and reasoning about …

Hart's Critics On Defeasible Concepts And Ascriptivism, Ronald P. Loui

All Computer Science and Engineering Research

Hart's "Ascription of Responsibility and Rights" is where we find perhaps the first clear pronouncement of defeasibility and the technical introduction of the term. The paper has been criticised, disavowed, and never quite fully redeemed. Its lurid history is now being used as an excuse for dismissing the importance of defeasibility. Quite to the contrary, Hart's introduction of defeasibility has uniformly been regarded as the most agreeable part of the paper. The critics' wish that defeasibility could be better expounded along the lines of a Wittgensteinian game-theoretic semantics has largely been fulfilled. Even the most contentious part of the paper, …

Can Declared Strategy Voting Be An Effective Instrument For Group Decision-Making?, Lorrie Faith Cranor

All Computer Science and Engineering Research

The goal of this research is to determine whether declared strategy voting can be an effective tool for group decision-making. Declared strategy voting is a novel group decision-making procedure in which preference is specified using voting strategies - first-order mathematical functions that specify a choice in terms of zero or more parameters. This research will focus on refining the declared strategy voting concept, developing an accessible implementation of declared strategy voting that can be used for mock elections, assessing the potential impacts of declared strategy voting, and evaluating the effectiveness of declared strategy voting for group decision-making. This proposal describes …