Engineering | Open Access Articles | Digital Commons Network™

Wright State University College Of Engineering And Computer Science Bits And Pcs Newsletter, Volume 11, Number 3, March 1995, College Of Engineering And Computer Science, Wright State University

BITs and PCs Newsletter

A fourteen page newsletter created by the Wright State University College of Engineering and Computer Science that addresses the current affairs of the college.

Go to article

Nonlinear Analysis Of Composite Beams Under Random Excitations, Snorri Gudmundsson

Master's Theses - Daytona Beach

The vibration responses of three unsymmetrically laminated beams, that are excited with a Gaussian random forcing function, are studied in this thesis. The beams are analyzed nonlinearly and compared to linear results, indicating some important corrections. The solution procedure begins with the derivation of the general equation of motion using Galerkin's method. Then, two approaches are taken in the solution. First, the equation of motion is attacked directly employing a real time Runge-Kutta numerical analysis. Second, the method of equivalent linearization is used. The thesis finds the results from the two approaches to be in a close agreement, although some …

Go to article

Evidence Of Heterogeneous Substructure Development During Primary Creep Of Ti-6al-2sn-4zr-2mo, R. W. Hayes, Cecil Rhodes, Blair London

Materials Engineering

No Abstract.

Go to article

Multipoint Quadratic Approximation For Numerical Optimization, Michael A. Blaylock

Theses and Dissertations

A quadratic approximation for nonlinear functions is developed in order to realize computational savings in solving numerical optimization problems. Function and gradient information accumulated from multiple design points during the iteration history is used in estimating the Hessian matrix. The approximate Hessian matrix is the available for a second order Taylor series approximation to the functions of interest. Several truss and frame models will be used to demonstrate the effectiveness of the new Multipoint Quadratic Approximation (MQA) in solving structural optimization problems.

Go to article

Analysis Of Heads-Up Display Quickening Versus Handling Qualities, Gary M. Konnert

Theses and Dissertations

This study investigated an analytical means of selecting the quickening time constant for the standardized Heads-Up Display flight path marker. The theoretically determined time constant allowed a faster, less resource intensive means of selecting the quickening time constant. The theoretically best time constant for pilot-aircraft handling qualities was equal to the airframe pitch attitude high frequency zero time constant, T_θ2. Flight test indicated an empirical, more labor intensive method yielded better handling qualities, even though paper analysis indicated the theoretical method was better. The theoretically determined time constant gave slightly lower handling qualities. but was less costly to …

Go to article

Compressible Turbulence Measurement In Low-Angle Injection Into A Supersonic Flow, Gregory J. Mccann

Theses and Dissertations

Mean flow and compressible turbulence measurements have been obtained at two stations downstream of low-angle supersonic injection into a Mach 3.0 flow (Re/m = 15 x 10⁶). Data were collected using conventional Pitot and cone-static probes, single and multiple overheat cross-wire anemometry, and flow visualization techniques (shadowgraphs and schlierens). A direct measure of total Reynolds shear stress was accomplished using a turbulence transformation of the Reynolds-averaged Navier-Stokes equations. Results show compressibility effects, indicated by density fluctuations, to be large relative to the velocity fluctuations and on the same order in all three components. Compressibility appears to account for …

Go to article

Pulse Width Modulation Drive Technique For High Resolution Liquid Crystal Gratings, Gregory P. Nordin, S. T. Kowel, J. H. Kulick, R. G. Lindquist, P. J. Nasiatka, A. Thomsen

Faculty Publications

We report the use of a pulse-width modulation drive technique for high-resolution liquid-crystal gratings and show how the grating diffraction efficiency depends on the duty cycle of the drive signal. We identify a regime in which the diffraction efficiency is linearly proportional to the duty cycle, thereby providing a linear drive characteristic.

Go to article

Observation Of Laser Ignition And Combustion Of Pulverized Coals, John C. Chen, Masayuki Taniguchi, Kazuyuki Ito

Mechanical Engineering

Direct observation of pulsed-laser ignition and combustion of pulverized coals with a high speed video has been made. A dilute stream of particles was dropped into a laminar, upward-flow wind tunnel with a quartz test section. The gas stream was not preheated. A single pulse from a Nd:YAG laser was focused through the tunnel and ignited several particles. The transparent test section and cool walls allowed for optical detection of the reaction sequence. The ignition and combustion behaviours of amorphous carbon spheres and an anthracite were as expected for heterogeneous ignition and reaction. Surprisingly, the reaction of a high volatile …

Go to article

Proceedings Of The First Annual Nebraska Aviation Education Association Conference, James E. Crehan, Uno Aviation Institute

Faculty Books and Monographs

UNOAI Report 94-5

Go to article

Delano-Earlimart Irrigation District: Variable Frequency Drive Study, Charles M. Burt

BioResource and Agricultural Engineering

This report was conducted to study the pump station operation at Delano-Earlimart Irrigation District (DEID) after the installation of a variable frequency drive (VFD) control. The district is currently involved with the California Energy Commission's low-interest loan program for the installation of VFD units on their pump stations near Delano, California. Delano-Earlimart Irrigation District is a special water district organized under Division 11 of the California Water Code and encompasses 56,500 acres in Southern Tulare County and Northern Kern County. DEID has 18 individual pumping stations. DEID installed VFDs on key pumps at three different plants (D-3, D-12, and D-14).

Go to article

Direction Of Arrival Estimation And Tracking Of Narrowband And Wideband Signals, A. Satish, Rangasami L. Kashyap

Department of Electrical and Computer Engineering Technical Reports

The research addresses estimation and tracking of direction of arrival @OA) and associated parameters of narrowband and wideband signals impinging on a uniform linear array of sensors. The signals are modeled as sample functions of a Gaussian stochastic process. Computationally efficient, approximate maximum likelihood (ML) methods are developed for direction of arrival estimation of narrowband signals impinging on a large array of sensors. A new likelihood function is formulated based on a large M (# sensors) Taylor's series approximation of the original likelihood function. Asymptotic expressions for Cramer-Rao lower bounds on the DOA estimates are derived. From the positive definiteness …

Go to article

Detecting Stator And Rotor Winding Faults In Three-Phase Induction Machines, Jeffrey C. Robertson, Chee Mun Ong

Department of Electrical and Computer Engineering Technical Reports

The purpose of this work is to investigate the efficiency of existing methods for on-line fault detection when applied to three-phase induction motors, spc:cifically to test known theoretical calculations of harmonics developed by certain types of faults experimentally. The work involves the development of equipment and test procedures needed and research of existing methods of fault detection. The experiments are cor~ductedb y planting a fault in a test induction machine and then performing a Fast Fourier Transform (FFT) on the line current. The processed data are then compared with those from the same test machine before the fault was planted. …

Go to article

Incorporation Of Zn In Gaas During Organometallic Vapor Phase Epitaxy Growth Compared To Equilibrium, W. Reichert, C.Y. Chen, W.M. Li, Jeffrey E. Shield, R.M. Cohen, D.S. Simons, P.H. Chi

Nebraska Center for Materials and Nanoscience: Faculty Publications

The zinc concentration measured after organometallic vapor phase epitaxy (GMVPE) growth on (100)-oriented GaAs at 700 °C has been compared to the zinc concentration measured after in-diffusion under near-equilibrium conditions. During diffusion, the concentration of Zn 20 nm below the surface was found to vary with P_Zn^1/2, as expected for bulk solid-vapor equilibrium. During growth, the concentration of Zn varied linearly with P_Zn up to a maximum value which was found to correspond to the solubility limit set by second phase formation, e.g., growth of Zn₃As₂. Although large differences were observed between …

Go to article

Optimal Sequence Estimation For Convolutionally Coded Signals With Binary Digital Modulation In Isi Channels, Fuqin Xiong

Electrical and Computer Engineering Faculty Publications

Decoding convolutional codes with binary digital modulation in intersymbol interference (ISI) channels is studied. The receiver structure is a whitened matched filter (WMF) whose transfer function is determined by the ISI channel. Decoding of the output sequence can be performed in two steps or one step. The two-step decoding first decodes the ISI corrupted coded sequence back to the ISI free coded sequence which is then decoded back to the uncoded message sequence. For one-step decoding, the entire encoder-channel-receiver system is modeled as a new encoder with combined memory length of the memory lengths of the original …

Go to article

Assuring A Long Term Groundwater Supply: Issues, Goals And Tools, Richard C. Peralta

Civil and Environmental Engineering Faculty Publications

Groundwater is a hidden, but important resource. We can practicably define groundwater as water beneath the ground surface that can be extracted by wells. Other water in the ground that is not considered to be available for man’s direct use is commonly called “subsurface water.” Subsurface water includes moisture within the root zone.

Go to article

Selecting Optimal Experiments For Feedforward Multilayer Perceptrons, Lisa M. Belue

Theses and Dissertations

Where should a researcher conduct experiments to provide training data for a multilayer perceptron? This question is investigated and a statistically-based method for optimally selecting experimental design points for multilayer perceptrons is introduced. Specifically, a criterion is developed based on the size of an estimated confidence ellipsoid for the weights in the multilayer perceptron. This criterion is minimized over a set of exemplars to find optimal design points. Initially, single output networks are examined. An example is used to demonstrate the superiority of optimally selected design points over randomly chosen points and points chosen in a grid pattern. Also, two …

Go to article

Investigation Of Ground Target Detection Methods In Fully Polarimetric Wide Angle Synthetic Aperture Radar Images, Wayne B. Mclaggan

Theses and Dissertations

Target detection is a high priority of the Air Force for the purpose of reconnaissance and bombardment. This research investigates and develops methods to distinguish ground targets from clutter (i.e. foliage, landscape etc.) in Wide Angle Synthetic Aperture Radar (WASAR) images. WASAR uses multiple aspect angle SAR images of the same target scene. The WASAR data was generated from a pre-release software package (XPATCH-ES) provided by the sponsor (WL-AARA). A statistical analysis and feature extraction is performed on the XPATCH-ES data. Polarimetric and wide angle covariance matrices are estimated and analyzed. From an analysis of the wide angle covariance matrix …

Go to article

A Decision Model For Environmental Assessment Of Process Waste Products, Kyle F. Byard

Theses and Dissertations

Environmental managers must compare the potential impacts of waste products when deciding upon courses of action. The estimation and comparison of these impacts is a subjective process, and few methods of comprehensive, quantitative comparison of waste products currently exist. The intent of this study is to develop a decision methodology to evaluate the environmental impacts of waste products and to score them for comparison. The method will follow established system design principles and incorporate significant characteristics of the waste material. Scores derived to represent the environmental impacts of materials will then he analyzed employing statistical and probabilistic methods to assess …

Go to article

Analysis And Modeling Of An Airport Departure Process, Joseph E. Hebert

Theses and Dissertations

This study analyzes departure delays at a major airport using probability models to represent this non-homogeneous process. The models developed in this study expand on the Markovian models presently used by employing the method of stages to represent some of the model processes. This technique improves the user's ability to achieve a close fit for the service time probability distribution while maintaining the advantages of the Markovian model. The three types of models developed and compared all assume a Markovian system entry process. The first model uses an exponential distribution to model the service process. The second uses an Erlang …

Go to article

Life-Cycle Cost Analysis For Radioactive Waste Remediation Alternatives, Thomas P. White, Ronald J. Toland, Dorian Y. Buitrago

Theses and Dissertations

This research has two primary objectives. The first is to develop a generic, interactive, spreadsheet-based life-cycle cost model that uses net present value and risk analysis techniques for cost comparison. The second is to apply the model specifically to the vitrification and cementation methods of waste remediation. By using spreadsheet analysis and graphics capabilities, the model will provide direct and objective comparisons of remediation alternatives. Since vitrification is a new technology, the plant design and operations are conceptual. Therefore, computer simulation and engineering judgement are integral to the vitrification LCC estimate.

Go to article

Applications Of Statistical Process Control In Monitoring Aircrew Bombing Proficiency, Kirk G. Horton

Theses and Dissertations

The current tools used by squadron supervisors to monitor the bombing performance of aircrews flying F-111E aircraft are monthly reports that have little predictive capability. No real-time methodology exists for monitoring and predicting aircrew bombing performance and preventing bombing problems that might cause an individual to become unqualified. It has been suggested that Statistical process Control (SPC) can be applied to the bombing process to develop tools for managing the process, correcting problems, and improve the bombing performance of a squadron. This study investigates the application of SPC to the bombing process. It examines data taken from an F-111E Fighter …

Go to article

Patient-Aircraft Forecasting For The Strategic Aeromedical Evacuation "Lift-Bed Process", Donald F. Kimminau

Theses and Dissertations

The goal of this research is to develop a tool for the Global Patient Movement Requirements Center (GPMRC) to efficiently forecast Aeromedical Evacuation (AE) aircraft and schedule patients in the lift-bed process. During a contingency, GPMRC is responsible for requesting required airlift, and providing lift-bed candidates to the Theater Patient Movement Requirements Center. The objective is to evacuate all waiting patients while minimizing the number of C-141 aircraft which must be dedicated to the AE mission. In the solution process, a short-term forecast of patient movement requirements is input, including number of patients, bed and aircraft availability, and hub preferences. …

Go to article

Response Surface Methodology As A Sensitivity Tool In Decision Analysis, David A. Meyers

Theses and Dissertations

The purpose of this study is to evaluate response surface methodology as a sensitivity analysis tool in the area of decision analysis. The advent of low-cost personal computer software, such as DPLTM, has created an accessible tool with the ability to frame and solve influence diagrams for decision problems. This study provides a comparison of current sensitivity analysis techniques vs those made possible through response surface methodology (RSM). Sensitivity analysis alternatives are demonstrated on a decision problem concerning the evaluation of force structure options for the Department of Defense. Sensitivity analysis is performed on both one-way and two-way perturbations of …

Go to article

The Effect Of Repeatedly Sampling An Embedded Metamodel On The Simulation Response, John Kent Patterson

Theses and Dissertations

This study investigated the effect on simulation output of repeatedly sampling an embedded metamodel. A metamodel is said to be embedded within a simulation if it is used to replace a submodule of that simulation. Replacing a deterministic module with an embedded deterministic metamodel poses no apparent mathematical problems. However, using a deterministic metamodel to replace a stochastic simulation component could require additional corrective actions. This research was performed in two phases. The first phase dealt with a set of tandem queues. It was shown that as each queue was sequentially replaced with a metamodel, the total system variance was …

Go to article

A Methodology For Evaluating Military Systems In A Counterproliferation Role, Stanley Stafira Jr.

Theses and Dissertations

This thesis develops a methodology to evaluate how dissimilar military systems support the accomplishment of the United States? counterproliferation objectives. The overall scope is to develop a model of the counterproliferation decision process that enables systems to be evaluated against common criteria. By using decision analysis, an influence diagram model is developed which represents military activities in the counterproliferation process. The key questions which must be asked in evaluating counterproliferation systems are highlighted. An analysis of perfect intelligence, perfect defensive, and perfect offensive systems reveal that a perfect intelligence system provides the greatest potential to meet the United States' counterproliferation …

Go to article

A Methodology To Generate Air Force Materiel Command Manpower Reduction Alternatives, Steven T. Bishop

Theses and Dissertations

The purpose of this study is to generate manpower authorization reduction alternatives for Air Force Materiel Command. The advent of low-cost personal computer software applications, such as Excel, has created an assessable tool with the ability to solve linear programming problems. This research examines the manpower resource reduction process of Air Force Materiel Command and models the Resources Allocation - Integrated Process Team (RA-IPT) decision process. A linear programming model is developed to assign these reduction through a weighted sum. The linear programming model is developed as a Microsoft Excel spreadsheet model, the Exercise Support Program (ESP), using Visual Basic …

Go to article

Modeling Corps Artillery In A Theater Level Combat Model, Richard F. Bowyer

Theses and Dissertations

This thesis describes the development of a methodology to explicitly model corps artillery assets in the Joint Staff's Joint Stochastic Analysis Research (J-STOCHWAR) and to quantify Army doctrine that guides organization of artillery for combat. The methodology incorporates corps artillery into the J-STOCHWAR by using the five fundamentals for organizing for combat, which reflect Army doctrine, and combines them with basic concepts already used in existing theater-level models. Other aspects of the problem include determining the appropriate level of detail, identifying techniques to solve the problem, and verifying the results. The proposed decision analysis solution technique provides a feasible method …

Go to article

The Development Of A Metamodel For A Major Weapon System Cost Model, Paul W. Campbell

Theses and Dissertations

Cost estimation is an integral part of the procurement process of major weapon systems. Despite this essential role, the cost estimation process is able to provide the decision makers and analysts with a limited amount of insight. This is due to the complex nature of the cost models that typically contain 20-30 cost estimating relationships (CERs) and 50-100 variables. In an effort to provide the decision makers and analysts with additional insight to the cost estimate, this research demonstrates a methodology that will (1) identify the cost drivers of the cost model, ( 2) estimate the effects of these cost …

Go to article

Groundwater Model Parameter Estimation Using Response Surface Methodology, Richard M. Cotman

Theses and Dissertations

This thesis examined the use of response surface methodology (RSM) to estimate the parameters of a finite-element groundwater model. An existing two-dimensional, steady-state flow model of a fractured carbonate groundwater system in southwestern Ohio served as the calibration target data set. A Plackett-Burman screening design showed that only four of the ten hydraulic conductivity zones significantly contributed to the output of the finite-element model. Also, the effective porosity parameter did not significantly affect the model's output. Using only the four significant hydraulic conductivity parameters; four two-level, four-factor designed experiments were conducted to exploit the first-order response surface defined by a …

Go to article

Estimation Of The Captive-Carry Survival Function For The Advanced Medium Range Air-To-Air Missile (Amraam), David R. Denhard

Theses and Dissertations

This thesis considers the problem of estimating the survival function of an item (probability that the item functions for a time greater than a given time t) from sampling data subject to partial right censoring (a portion of the items in the sampling data have not yet been observed to fail). Specifically the thesis describes several parametric and non-parametric statistical models that can be used when the sampling data is subject to partial right censoring. These models are applied to the case of estimating the captive-carry survival function of the AIM-120A Advanced Medium Range Air-to-Air Missile (AMRAAM).

Go to article

Full-Text Articles in Engineering

Wright State University College Of Engineering And Computer Science Bits And Pcs Newsletter, Volume 11, Number 3, March 1995, College Of Engineering And Computer Science, Wright State University

BITs and PCs Newsletter

Nonlinear Analysis Of Composite Beams Under Random Excitations, Snorri Gudmundsson

Master's Theses - Daytona Beach

Evidence Of Heterogeneous Substructure Development During Primary Creep Of Ti-6al-2sn-4zr-2mo, R. W. Hayes, Cecil Rhodes, Blair London

Materials Engineering

Multipoint Quadratic Approximation For Numerical Optimization, Michael A. Blaylock

Theses and Dissertations

Analysis Of Heads-Up Display Quickening Versus Handling Qualities, Gary M. Konnert

Theses and Dissertations

Compressible Turbulence Measurement In Low-Angle Injection Into A Supersonic Flow, Gregory J. Mccann

Theses and Dissertations

Pulse Width Modulation Drive Technique For High Resolution Liquid Crystal Gratings, Gregory P. Nordin, S. T. Kowel, J. H. Kulick, R. G. Lindquist, P. J. Nasiatka, A. Thomsen

Faculty Publications

Observation Of Laser Ignition And Combustion Of Pulverized Coals, John C. Chen, Masayuki Taniguchi, Kazuyuki Ito

Mechanical Engineering

Proceedings Of The First Annual Nebraska Aviation Education Association Conference, James E. Crehan, Uno Aviation Institute

Faculty Books and Monographs

Delano-Earlimart Irrigation District: Variable Frequency Drive Study, Charles M. Burt

BioResource and Agricultural Engineering

Direction Of Arrival Estimation And Tracking Of Narrowband And Wideband Signals, A. Satish, Rangasami L. Kashyap

Department of Electrical and Computer Engineering Technical Reports

Detecting Stator And Rotor Winding Faults In Three-Phase Induction Machines, Jeffrey C. Robertson, Chee Mun Ong

Department of Electrical and Computer Engineering Technical Reports

Incorporation Of Zn In Gaas During Organometallic Vapor Phase Epitaxy Growth Compared To Equilibrium, W. Reichert, C.Y. Chen, W.M. Li, Jeffrey E. Shield, R.M. Cohen, D.S. Simons, P.H. Chi

Nebraska Center for Materials and Nanoscience: Faculty Publications

Optimal Sequence Estimation For Convolutionally Coded Signals With Binary Digital Modulation In Isi Channels, Fuqin Xiong

Electrical and Computer Engineering Faculty Publications

Assuring A Long Term Groundwater Supply: Issues, Goals And Tools, Richard C. Peralta

Civil and Environmental Engineering Faculty Publications

Selecting Optimal Experiments For Feedforward Multilayer Perceptrons, Lisa M. Belue

Theses and Dissertations

Investigation Of Ground Target Detection Methods In Fully Polarimetric Wide Angle Synthetic Aperture Radar Images, Wayne B. Mclaggan

Theses and Dissertations

A Decision Model For Environmental Assessment Of Process Waste Products, Kyle F. Byard

Theses and Dissertations

Analysis And Modeling Of An Airport Departure Process, Joseph E. Hebert

Theses and Dissertations

Life-Cycle Cost Analysis For Radioactive Waste Remediation Alternatives, Thomas P. White, Ronald J. Toland, Dorian Y. Buitrago

Theses and Dissertations

Applications Of Statistical Process Control In Monitoring Aircrew Bombing Proficiency, Kirk G. Horton

Theses and Dissertations

Patient-Aircraft Forecasting For The Strategic Aeromedical Evacuation "Lift-Bed Process", Donald F. Kimminau

Theses and Dissertations

Response Surface Methodology As A Sensitivity Tool In Decision Analysis, David A. Meyers

Theses and Dissertations

The Effect Of Repeatedly Sampling An Embedded Metamodel On The Simulation Response, John Kent Patterson

Theses and Dissertations

A Methodology For Evaluating Military Systems In A Counterproliferation Role, Stanley Stafira Jr.

Theses and Dissertations

A Methodology To Generate Air Force Materiel Command Manpower Reduction Alternatives, Steven T. Bishop

Theses and Dissertations

Modeling Corps Artillery In A Theater Level Combat Model, Richard F. Bowyer

Theses and Dissertations

The Development Of A Metamodel For A Major Weapon System Cost Model, Paul W. Campbell

Theses and Dissertations

Groundwater Model Parameter Estimation Using Response Surface Methodology, Richard M. Cotman

Theses and Dissertations

Estimation Of The Captive-Carry Survival Function For The Advanced Medium Range Air-To-Air Missile (Amraam), David R. Denhard

Theses and Dissertations