Engineering Commons^™

Review: 'Integrated Optics: Design And Modeling,' By Reinhard Marz, Bradley D. Duncan

Electro-Optics and Photonics Faculty Publications

My overall impression is that Integrated Optics: Design and Modeling will make a fine addition to almost anyone's collection of books on integrated optics. It will, however, serve its readers better as a reference book than as a text from which to first learn the basic concepts of integrated optics. I say this because the book is written at a fairly sophisticated technical level, though the author often moves rather quickly to the "bottom line" without providing material much beyond what is first necessary to introduce a problem or concept, and then a statement of the results and/or implications. It …

Bulletin - Spring, 1995, Civil Aviation Medical Association

Browse all Civil Aviation Medical Association Newsletters

A sixteen page newsletter of the Civil Aviation Medical Association. The newsletter provided news about civil aviation medicine and information related to the organization.

16th Conference On Senior Engineering Design Projects, College Of Engineering And Applied Sciences

Senior Engineering Design Conference

The 16th Conference on Senior Engineering Design Projects was held on April 11, 1995 at the College of Engineering and applied Sciences on the Parkview Campus of Western Michigan University. The college sponsors the conference to showcase the work of its graduating seniors, who are required to complete a capstone project that puts into practice what they have learned. Many of the projects are sponsored by business and industry.

A New Spray Evaporation Model Based On Droplet Interface Phenomena, Nihad E. Daidzic, Gangolf Kohnen, Martin Sommerfeld

Aviation Department Publications

In this work the influence of droplet shape oscillations on droplet evaporation is shown. Through nonlinear mode interactions, turbulence and aerodynamic triggering of vibrations cause by vortex shedding, droplets always oscillates in spray flows. Droplet shape oscillation cause higher evaporation rates through several physical phenomena such as an average increase of the superficial surface area, periodic micro-convection and boundary layer destruction, and local saturation pressure changes due to local curvature effects. The inviscid theory of small-amplitude droplet oscillations was used which resulted in better agreement with the measurement data of droplet size distributions in sprays for different axial coordinates.

An Experimental Study Of Transient Flows In Pulse Combustors, Michael P. Femandes

Master's Theses - Daytona Beach

The purpose of this investigation was to experimentally characterize a pulse combustor with respect to ambient conditions, pressure amplitudes, wall temperature, combustor geometry and type of centerbody used. The wall temperatures were recorded and the pressure variation was obtained using a sampling rate of 10,000 readings per second. These parameters were recorded for two different tailpipe lengths and centerbodies, and for different ambient conditions. Power spectrums were then obtained from the pressure variations. These spectrums displayed the peak amplitudes and the frequencies at which they occurred. The experiment showed distinct repeatability. It was concluded that combustor displayed the steady, pulsing …

Low Level Alcohol And Its Residual Effect On A Pilot's Threshold For Detecting Angular Motion, Regina G. Bolinger

Master's Theses - Daytona Beach

The purpose of this study was to examine a pilot's sensitivity to a change in angular motion after alcohol ingestion and determine the duration of effect after the time the blood alcohol content (BAC) reached zero. An earlier study determined that a pilot's threshold for detecting angular motion was affected by 30% with low doses of alcohol ingestion. An important question remaining is whether the pilot's sensitivity to angular motion will continue to be significantly affected after the time BAC reaches zero. Twelve instrument-rated pilots flew a partial panel rotating simulator under an in-flight scenario, and thresholds were measured before …

Classification Of Acoustic Emission Signals From An Aluminum Pressure Vessel Using A Self-Organizing Map, Weldon Paul Thornton

Master's Theses - Daytona Beach

Acoustic emission nondestructive testing has been used for real-time monitoring of complex structures. All of the structures were made of materials at least 0.070 inch thick. The purpose of this research was to demonstrate the feasibility of using neural networks to classify acoustic emission signals gathered from a pressure vessel made of 2024-T3 aluminum 0.040 inches thick, i.e. thin aluminum sheet. AE waveforms were recorded during fatigue cycling of one pressure vessel using a wide band transducer and a digital oscilloscope connected to a computer. The source for each signal was determined using two narrow band transducers and a LOCAN-AT …

Modeling For Optimal Management Of Agricultural And Domestic Wastewater Loading To Streams, Muhammad Shafqat Ejaz, Richard C. Peralta

Civil and Environmental Engineering Faculty Publications

A simulation/optimization (S/0) model to aid managing multiobjective wastewater loading to streams while maintaining adequate downstream water quality is presented. The conflicting objectives are to maximize the human and dairy cattle populations from which treated wastewater can be discharged to the river system. Nonindustrial municipal (domestic) wastewater undergoes primary and secondary treatment by a sewage treatment plant (STP) before entering as a steady point source. Dairy wastewater is treated by overland flow (OLF) land treatment before entering the stream as a controlled steady diffuse source. Maximum dual-source loading strategies which do not degrade downstream water quality beyond specified limits are …

Standardized Checklists Versus Variable Checklist: An Evaluation In A Light Twin Simulator, Veronica Terese Cote

Master's Theses - Daytona Beach

The purpose of this study was to determine if a checklist that varied by sequence would enable the pilot to detect potential errors more easily than those who used an unchanging checklist. A flight hour based stratified sample of pilots were randomly divided into two groups and flew a series of eight flights in a light twin aircraft simulator. The control group used the same checklist for each trial; the experimental group used a checklist that covered the same items but varied in sequence for each trial. Faults were introduced in the last two trials. The number of faults discovered …

Numerical Investigation Of Second-Order Effects In A Supersonic Boundary-Layer, Timothy R. Membrino

Master's Theses - Daytona Beach

Historically, the study of boundary-layer flows has centered on the analysis of the first-order boundary-layer equations and their application to physical flow problems. However, selected “real-world” boundary-layer flows exhibit significant second-order effects which are neglected by the first-order equations. Full Navier-Stokes solutions are often not merited or desired for these flows. Therefore, the second-order boundary-layer equations provide a compromise.

Few validating comparisons have been attempted between second-order boundary-layer theory and experimental or numerical solutions of compressible viscous flows. Experimental simulations to capture second-order effects are difficult since the desired effects are small and can exist simultaneously, resulting in a neutralizing …

Wright State University College Of Engineering And Computer Science Bits And Pcs Newsletter, Volume 11, Number 4, April 1995, College Of Engineering And Computer Science, Wright State University

BITs and PCs Newsletter

A twelve page newsletter created by the Wright State University College of Engineering and Computer Science that addresses the current affairs of the college.

The Development Of A Computerized Airline Strategy Simulation: A Decision Support System To Assist Airline Management Training, Chulkyu Lee

Master's Theses - Daytona Beach

This thesis involves the development of a computerized airline strategy simulation, decision support system to assist airline management training. The simulation program is designed to be run under the Microsoft Windows™ environment on any IBM - compatible computer. The primary objective of this thesis is to develop a useful program to be helpful in practicing decision making skills in a group setting, understanding the significance of strategic management, forecasting demand in today's turbulent airline industry, learning stockholders' roles in a business, and practicing skills required in airline operations management.

An Analysis Of The Disposition Of Used Foundry Sand With Thermal Reclamation, Douglas Miller

Graduate Research Papers

The purpose of this study was to identify the economic and environmental concerns for the disposal, reuse, or reclamation of used foundry sand and show how foundries have developed options to landfills. The sand type and the reclamation processes available are the factors to use in determining whether disposal, reuse, or reclamation is appropriate. The continued use of landfills for disposal of used sand strongly indicates that reclamation and reuse techniques were either not understood or not as economical as disposal. Public concerns and new environmental laws demand that alternate means of disposal for used foundry sand should be developed …

Microwave Detection Optimization Of Disbond In Layered Dielectrics With Varying Thickness, Stoyan I. Ganchev, Nasser N. Qaddoumi, Emarit Ranu, R. Zoughi

Electrical and Computer Engineering Faculty Research & Creative Works

The detection sensitivity optimization of air disbond in layered dielectric composites, using an open-ended rectangular waveguide, is studied both theoretically and experimentally. The sensitivity of the disbond detection is strongly influenced by the proper choice of parameters such as the operating frequency and the layered composite geometry (conductor backed or terminated by an infinite half-space of air). The capability of optimizing the measurement system parameters to detect and estimate the thickness of a disbonded layer independent of some changes in the thickness of the dielectric coating is also demonstrated. The impact of the parameters influencing detection optimization is theoretically investigated …

Mpvm: A Migration Transparent Version Of Pvm, Jeremy Casas, Dan Clark, Ravi Konuru, Steve Otto, Robert Prouty, Jonathan Walpole

Computer Science Faculty Publications and Presentations

Parallel Virtual Machine (PVM) is a widely-used software system that allows a heterogeneous set of parallel and serial UNIX-based computers to be programmed as a single message-passing parallel machine, In this paper, an extension to PVM to support dynamic process migration is presented. Support for migration is important in general-purpose workstation environments since it allows parallel computations to co-exist with other applications, using idle-cycles as they become available and off-loading from workstations when they are no longer free. A description and evaluation of the design and implementation of the prototype Migratable PVM system is presented together with some performance results.

Interaction Buckling Of Flange, Edge Stiffener And Web Of C-Sections In Bending, Colin A. Rogers, R. M. Schuster

CCFSS Library (1939 - present)

No abstract provided.

Aerodynamic Design Optimization With Consistently Discrete Sensitivity Derivatives Via The Incremental Iterative Method, Vamshi M. Korivi

Mechanical & Aerospace Engineering Theses & Dissertations

In this study which involves advanced fluid-flow codes, an incremental iterative formulation (also known as the "delta" or "correction" form), together with the well-known spatially split approximate-factorization algorithm, is presented for solving the large, sparse systems of linear equations that are associated with aerodynamic sensitivity analysis. For the smaller two dimensional problems, a direct method can be applied to solve these linear equations in either the standard or the incremental form, in which case the two are equivalent. However, iterative methods are needed for larger two-dimensional and three dimensional applications because direct methods require more computer memory than is currently …

Differential Current Switch Logic: A Low Power Dcvs Logic Family, Dinesh Somasekhar, Kaushik Roy

Department of Electrical and Computer Engineering Technical Reports

We present a new logic family, Differential Current Switch Logic (DCSL) for implementing clocked CMOS circuits. The circuit is in principle a differential cascode voltage switch logic circuit (DCVS). In cornparimsonto other forms of' clocked DCVS, DCSL achieves better performance both in terms of power and speed by restricting internal voltage swings in the N tree. Automatic lock-out of inputs on completion of evaluation is a novel feature of the circuit and allows new implementation of logic functions and the possibility of operating with reduced voltage swings. SPICE simulattions carried out with. the MOSIS 1 . 2 process indicate that …

Closed-Loop Identification Of Unstable Systems In Time And Frequency Domains, Hyun Chang Lee

Mechanical & Aerospace Engineering Theses & Dissertations

This dissertation presents closed-loop identification algorithms of an unstable system in the time and frequency domains. In the time domain, the projection filter, which is a linear transformation which projects (transforms) a finite number of input-output data of a system into its current space, is used to relate the state-space model with a finite difference model. The method developed can take into account the effects of process noise as well as measurement noise and identify open-loop systems with unknown feedback dynamics in the closed-loop operation. Then the recursive relations between Markov parameters and the ARX model are derived to identify …

Assumed-Stress Hybrid Beam Element For Nonlinear Elastic Stress Analysis, William Scott Carron

Mechanical & Aerospace Engineering Theses & Dissertations

An assumed-stress hybrid 2-node beam element is formulated using the Hellinger-Reissner variational principle. Independent approximations are made for the stresses and displacements. The stress field is assumed to be consistent with the force and moment equilibrium equations. The displacement field is assumed to be linear except that the transverse deflections vary quadratically using the rotational freedoms, The element is implemented in COMET and coupled with its corotational utilities. This enables an analyst to extend the element to problems involving geometric nonlinearities. Excellent performance of the element for nonlinear behaviors of both a stiffening and softening behavior is demonstrated.

Non-Linear Boundary-Layer Receptivity Due To Distributed Surface Roughness, Tahani R. Amer

Mechanical & Aerospace Engineering Theses & Dissertations

The process by which a laminar boundary layer internalizes the external disturbances in the form of instability waves is known as boundary-layer receptivity. The objective of the present research was to determine the effect of acoustic excitation on boundary-layer receptivity for a flat plate with distributed variable-amplitude surface roughness through measurements with a hot-wire probe. Tollmien-Schlichting mode shapes due to surface roughness receptivity have also been determined, analyzed, and shown to be in agreement with theory and other experimental work. It has been shown that there is a linear relationship between the surface roughness and receptivity for certain roughness configurations …

Modeling And Simulation Of Load Introduction For Fuselage Crown Panel Testing, Kevin P. Belack

Mechanical & Aerospace Engineering Theses & Dissertations

This paper discusses the mechanism and behavior of load introduction to internally pressurized fuselage crown panels. Emphasis is placed on the finite element modeling of a simulated pressure-box test machine and representative fuselage crown panel. The geometry and mesh requirements for the finite element model are examined through numerical studies which gradually increase in complexity. These numerical studies culminate in the detailed specification of boundary conditions, mesh densities, load introduction mechanisms, element choice and solution process for the simulation of a pressure-box test machine and test panel.

The results obtained using the finite element model are then compared with experimental …

Knowledge Acquisition And Structuring By Multiple Experts In A Group Support Systems Environment, Bernard Lee Lewis

Engineering Management & Systems Engineering Theses & Dissertations

This study addresses the impact of Group Decision Support Systems (GDSS) on expert system development by multiple Domain Experts. Current approaches to building expert systems rely heavily on knowledge acquisition and prototyping by a Knowledge Engineer working directly with the Domain Expert. Although the complexity of knowledge domains and new organizational approaches demand the involvement of multiple experts, standard procedures limit the ability of the Knowledge Engineer to work with more than one expert at a time.

Group Decision Support Systems offer a networked computerized environment for group work activities, in which multiple experts may express their ideas concurrently and …

Thermal Effects On Y2O3:Eu3+ For Fiber Optic Temperature Sensing, Arnel C. Lavarias

Electrical & Computer Engineering Theses & Dissertations

Fiber optic methods have gained acceptance in the past several years as non­ intrusive optical techniques of measuring environmental variables, particularly under hostile conditions. Fiber optic temperature sensors are required for many applications which have a large operating range. One way to implement this sensor is to introduce rare earth-doped materials into a fiber showing temperature-dependent optical emission characteristics. The thermal effects on optical emission characteristics of Y₂O₃:Eu³⁺ were studied. The thermal broadening and temperature dependence of the lifetime (τ) of the 611.4 nm emission due to the ⁵D₀ ➔ 7F …

Generalization Metrics For Neural Modeling Applications In System Identification, Denise M. Reeves

Electrical & Computer Engineering Theses & Dissertations

In this thesis a procedure to design multilayer feedforward networks for system identification with good prediction properties is presented. Central to the design procedure is a means to characterize the prediction capabilities of various trained neural networks. Such knowledge will allow for the identification of the best network design. For system identification purposes, a "good" model is one that is good at predicting, In particular, a good model is one that produces small prediction errors when applied to a set of cross-validation data. We formulate and implement a criterion function designed to measure the size of a trained neural network's …

Wing-Section Optimization For Supersonic Viscous Flow, Cem Cihan Item

Mechanical & Aerospace Engineering Theses & Dissertations

The recent interest in the High Speed Civil Transport (HSCT) has resulted in renewed research studies of optimized supersonic cruise transport configurations. Incorporation of flow viscosity effects in the design process of such a supersonic wing is currently under investigation. This may lead to more accurate problem formulations and, in tum, greater aerodynamic efficiency than can be obtained by the traditional, inviscid, linear theories. In this context, for a design code to be a candidate for a complex optimization problem, such as three-dimensional viscous supersonic wing design, it should be validated using simpler building-block shapes.

To optimize the shape of …

Optical Constants Of GaXIn1-XP Lattice Matched To Gaas, Mathias Schubert, V. Gottschalch, Craig M. Herzinger, Huade Yao, Paul G. Snyder, John A. Woollam

Department of Electrical and Computer Engineering: Faculty Publications

The optical constants of Ga_0.51In_0.49P have been determined from 0.8 to 5.0 eV using variable-angle spectroscopic ellipsometry measurements at room temperature. The metal-organic vapor-phase-epitaxy-grown samples were x-ray analyzed to confirm lattice matching to the GaAs substrate. The effects of the native oxide were numerically removed from the data to determine the intrinsic optical constants. This is important because the optical constants reported become generally useful for modeling multiple-layer structures. A Kramers-Kronig analysis was used to reduce interference-related fluctuations in the below-gap refractive index. Near the band edge a mathematical form for excitonic absorption was included. Critical …

Gps Modeling For Designing Aerospace Vehicle Navigation Systems, John J. Dougherty, Hossny El-Sherief, Daniel J. Simon, Gary A. Whitmer

Electrical and Computer Engineering Faculty Publications

The complexity of the design of a Global Positioning System (GPS) user segment, as well as the performance demanded of the components, depends on user requirements such as total navigation accuracy. Other factors, for instance the expected satellite/vehicle geometry or the accuracy of an accompanying inertial navigation system can also affect the user segment design. Models of GPS measurements are used to predict user segment performance at various levels. Design curves are developed which illustrate the relationship between user requirements, the user segment design, and component performance.

Considering Ecological Constraints While Optimizing Sustained Groundwater Yield, Pahvant Valley, Utah, Getachew Belaineh, Richard C. Peralta

Civil and Environmental Engineering Faculty Publications

Concern for groundwater quality and availability is increasing in Pahvant Valley. Ground-water levels are declining due to intense groundwater extraction for irrigation; water having high total dissolved solids concentration is flowing from the southwest toward the pumping sites; and discharge from natural springs in a wildlife refuge is declining. Transient simulation of aquifer response to 20 years of the 1985 pumping rates (beginning with 1985 groundwater level) predicted that spring discharge would decrease by as much as 87% from 1985 rates. Presented are preliminary pumping strategies that maximize sustainable, steady-state groundwater extraction without unacceptably reducing discharge from the springs. A …

Preliminary Pumping Strategy Analyses For Southeastern Cache Valley, Utah And River Baseflow Impacts, Shyamal B. Chowdhury, Richard C. Peralta

Civil and Environmental Engineering Faculty Publications

US/REMAX, a linear optimization model for groundwater management, is used to compute preliminary optimal sustained groundwater pumping increases for southeastern Cache Valley. US/REMAX employs the response matrix method of representing system response to stimuli as constraint equations within an optimization problem. The management objective is to maximize groundwater extraction at four specified locations subject to constrai~ts on aquifer potentiometric head, aquifer/river interflow, and the water level in the uppermost aquifer layer. Four scenarios (constraint sets) are presented. The results are most sensitive to the aquifer/river interflow constraints. Interflow is deemed important because baseflows are crucial to satisfying fish, aquatic life, …