Engineering Commons^™

Mobility Modeling And Simulation Of Soi Si1-X Gex P-Mosfet, Sida Zhou

Dissertations and Theses

With increasing demand for complex and faster circuits, CMOS technologies are progressing towards the deep-submicron level. Process complexity increases dramatically, and costly techniques are to be developed to create dense field isolation and shallow junctions. Silicon-On-Insulator (SOI) may solve some of these problems. On the other hand, strained Si_1-x Ge_x layers have been successfully grown on Si substrates and demonstrated much higher hole mobility than bulk Si. This can be used to build high-mobility p-MOSFET with a buried Si_1-x Ge_x channel. A high mobility p-MOSFET would improve both the circuit speed and the level of integration. …

Self-Assembled Monolayers: Preparation,Properties And Application, Xiandui Dong, Juntao Lu, Chuansin Cha

Journal of Electrochemistry

Self-assembling technique is a versatile approach to the preparation of monolayersof well-defined composition, structure, thickness and physicochemical properties. Different aspects, such as wettability, adhesion, corrosion, tribology, electrontransfer, protein adsorption, molecular recognition, and applications of SAMs are widely studied. The developments in the last decade arereviewed, with special attention to the electrochemical studies related to electrodes modified with thiol-derivative-based SAMs.

Problems On The Study Of Anodic Films On Pb In Sulfuric Acid Solution (Ⅰ), Wenbin Cai, Houtian Liu, Weifang Zhou

Journal of Electrochemistry

The identification of the phase composition of the anodic film on Pb formed in H₂SO₄ solution in PbO potential region has long been argued, together with the explanation of thecathodic peak at about -0.9V (Hg/HgSO₄) in the linear sweep voltammogram for a Pb-H₂SO₄ system. In this article, a review of our recent investigations was presented on the above problems.

The Influnce Of Conjugated Π Bond In Promoter Molecule On The Direct Electrochemical Reaction Of Cytochrome C, Xiaogang Qu, Tianhong Lu, Shaojun Dong

Journal of Electrochemistry

The promoter effect of thiophene with only one-functional group on the directelectrochemical reaction of cytochrome c was compared with that of tetrahydrothiophene in this report. It was found that thiophene is a good promoter. But tetrahydrothiophene could not facilitate the directelectrochemistry of cytochrome c although this compound is very similar to thiophene in str uctureexcept for conjugated π bond. This demonstrated that the conjugated π bond in thiophene plays animportant role for the acceleration of the direct electrochemistry of cytochrome c.

Studies Of Cl- On The Electrochemical Oscillation Behaviour Of Electrodeposited Silver Indium Selenide Thin Films By Using Dynamic Impedance And The Condensance Method, Shaoai Xie, Xunnan Deng, Jinkua You

Journal of Electrochemistry

The electrochemical oscillation behaviour of hydrogen peroxide cathodic reductionprocess on the electro deposited silver indium selenide electrode has been studied by using in-situ dynamic impedance and the condensance measurement technique in different supporting electrolytes solutions. The surface composition of AglnSe₂ electrodes (before and after oscillating) were also givenby AES. According to the experimental results, the influence of Cl^- on the mechanism of this electrochemical oscillaton process has been discussed in detail.

The Photoelectrochemical Studies Of Passive Films On Rebar Electrodes In Simulated Cement Pore Solution, Wei Chu, Yuanxiang Shi, Baoming Wei, Yong Yang, Xuguang Chen, Zugeng Lin

Journal of Electrochemistry

The electronic properties of the passive film on REBAR electrodes in simulatedcement pore solution (pH=9.0～13.8) have been investigated using in-situ photoelectrochemical methods. The results show that the passive film is composed of mixed oxides of ferrum, and it is an amorphous, n-type semiconductive film. Variations of pH values, ions in the solution and film-formation potentials can affect the composition of the films. There are two main stages in the growthof the film, with two rate functions characterized by linear relation between the film thickness and thelogarithm of time. The addition of inhibitor NaNO₂ changes the composition, structure and growth …

Properties Of Zr-Based Laves Phase Hydrogen Storage Electrode, Xueping Gao, Huabin Yang, Deying Song, Yunshi Zhang, Zuoxiang Zhou, Wei Zhang, Panwen Shen

Journal of Electrochemistry

After treated by HF solution,the surface of Zr(V_0.2Mn_0.2Ni_0.54Mo_0.06)_2.4 alloy was transformed from Zr-rich and Mn-rich layer to Ni-rich layer. In this way, the nickel on thesurface could be believed to be the Raney-type nickel, which could obviously shorten the activation cycles, improve electrocatalytic activity and hydrogen adsorption ability. In this paper, the reaction mechanism on the alloy surface (i.e. the mechanism of nickel-catalysis, hydrogen-adsorption and hydrogen-transference) had been investigated. And the impedance spectra were fitted to an equivalentcircuit using a non-linear, least-squares (NLLS) fitting program.

Coadsorption Of Para-Toluene Sulfamide And 1.4-Butynediol At Mercury Electrode, Shukun Huang, Naixian Xie, De Gao, Qiang Liu

Journal of Electrochemistry

The coadsorption characteristics of para-toluene sulfamide and 1,4-butynediol atmercury electrode have been studied by means of electrocapillary curve, differential capacity curve, Stuart model and the SCFMO method (CNDO/2). The coadsorption is a physical adsorption occuringnaturally. Lateral and flat orientations in the two adsorbates close to their maximum adsorptionpotential were considered respectively. Unlike attractive interactions of their own, there was arepulsive interaction at their coadsorption layer. A preferred adsorption of 1,4-butynediol occurred when they were at the same volume concentration.

A Relativistic Density-Functional Investigation Of Vibrational Frequencies Of Cn- On Cu And Ag Electrodes, Mengsheng Liao, Xin Lv, Qianer Zhang

Journal of Electrochemistry

/

Effect Of Symmetric Alternating Current On Cathode Surface Before Iron Deposition, Xintan Hu

Journal of Electrochemistry

The composition and thickness of active film formed on the surface of cathode made of low carbon steel after treated by symmetric alternating current (SAC) in ferris chloride bathis studied,and the interfacial morphology of the iron deposit and the substrate is also examined. The results show that the active film, which a thickness of 20～25nm can be obtained under SAC densityof about 7 A·dm^-2 ,so that the adherent iron deposit can be achieved on the active film. The effect of SAC on cathode surface is discussed in detail.

The Oxidation Of Hydrogen Absotbing Alloys And Its Inhibition, Suqin Wang, Baojia Xia, Geping Yin, Pengfei Shi

Journal of Electrochemistry

This paper introduces the method to judge: 1)the possibility of oxidation of themetal hydride electrode in an anode process by cyclic voltammetric curves, 2)the oxidation pattern ofmetal hydride electrode in oxygen atmosphere in various charged states, and 3)the inhibition ofoxidation of hydrogen absorbing alloys by certain surface treatment.

Photoelectric Property For Zinc Phthalocyanine Of Doping C60 On Inp Electrode, Mengxiong Zhan, Rongqing Yu, Biaolian Zhen, Dadian Cheng, Lansun Zheng

Journal of Electrochemistry

The curves of spectral and photovoltaic responses to zinc phthalocyanine of doping C₆₀ were determinted. The photovoltaic property for zinc phthalocyanine of doping C₆₀ wereinvestigated on the InP single crystal in the photoelectrochemical cell.The results have shown that: 1)The photovoltaic effect and the in tensities of the spectral response and of the photovoltaic responsefor ZnPc of doping C₆₀ were greater than those of ZnPc; 2)had better redox couple in the cells.

Theory Of Cyclic Voltammetry At Microdisk Electrode For Reversible Systems, Qiankun Zhuang, Hongyuan Chen

Journal of Electrochemistry

By means of a new approach, the current equations of cyclic voltammetry which describes two cases of quasi-steady-state and fast linear scan at microdisk electrode for reversiblesystem were presented and verified experimentally. It has been shown that the features of this currentessentially depend on the ration of, which is described in detail. ln extreme cases, the equationsare the same as those listed in literatures for large plane and spherical electrodes. Using the quasi-steady-state equation, the causes and conditions for forming steady state, quasi-steady state andhysteresis current for linear sweep voltammetry are all explained and discussed. The width of the ″hysteresis …

Studies On The Bright Zinc-Nickel Alloy Palting In Alkaline Baths, Jiale Cai, Shaomin Zhou

Journal of Electrochemistry

The electrochemical properties of the Zn-Ni plating baths and the structure andperformance of the obtained deposits were investigated. The results show that the nickel content of theobtained deposits is incereased with decreasing of Zn²⁺/Ni²⁺ ratio in the baths and with increasing of cathodic current density; The cathode current efficiency is increased with increasing of Zn[Ⅱ] content in the bath and with decreasing of cathodic current density. The ZN-11 additive used is thereaction product of heterocyclic compound and polyamines with epichlorohydrin, it has a higheradsorptivity on Hg-electrode at potential between -0.16～-1.68 V (vs. Hg/HgO, 1 mol·L^-1 KOH). …

Study On The Surface States Of Zinc Sulfide Thin Film Doped With Erbium And Their Effect On The Relaxation Luminance, Yujiang Wang, Zhaohong Liu, Zhenxiang Chen

Journal of Electrochemistry

X-ray photoelectron spectrum and characteristics of the capacity, versus thevoltage of the thin film devices are measured to study the surface states of the zinc sulfide thin film.The transient electroluminescence excited by pulses shows the relaxation luminance peaks during anon-exponential decay process of the characteristic transitions activated by Er³⁺ in the ZnS directcurrent thin film electroluminescence (DCTFEL) devices.The surface structures of ZnS:Cu, Cl, Erfilm with the absorption of oxygen, and the effect of the surface states on the relaxation luminance ofthe devices are discussed.

Progress In R&D Of Lithium Rechargeable Batteries In China, Jiqiang Wang

Journal of Electrochemistry

No abstract provided.

Electrodeposition Of Cobalt And Rare Earth-Cobalt In Urea-Nabr-Kbr Melt, Qiqin Yang, Kairong Qiu, Derong Zhu, Lichang Sa

Journal of Electrochemistry

/

Development Of High Active Aluminum Alloy Sacrificail Anode, Zhaobo Wei, Jianhua Wu, Guangzhang Chen, Songrao Jiang, Zenya Li

Journal of Electrochemistry

A high active aluminum alloy sacrificial anode with the operating potential-1.40 v (SCE), and the the current capacity more than 2175 A·h/kg and dissolution fair issuccessfully developed by adding zinc, indium, gallium, bismuth and heat treatment. The aluminumalloy sacrificial anode with super electrochemical properties can throughly replace the magnesium alloyanode when applied to seawater and freshening seawater, which is obviously advantageous to thetechnology and economy.

Studies On The Structure Of Licoo2 Synthesized With Tartaric Acid And The Behaviorof Its Rechargeable Lithium Battery, Fuping Zhang

Journal of Electrochemistry

The structure of LiCoO₂ synthesized with tartaric acid and the behavior of itsrechargeable Lithium battery have been studied by XRD, XPS, CV, CT. It has been shown that LiCoO₂ has a space group R3m with hexagonal parameters a=0.2810 nm, c=1.4088 nm. Low-spin state Co³⁺ configuration in LiCoO₂ has been suggested. Also, Li₂O, was identified onits surface. Furthermore, the capacity and the middle working voltage of its Lithium battery are about 120 mA·h·g^-1 and 3.8 V, respectively. The EMF of the cell changes with the Lithium composition of itscathode following E=4.318-0.450 X^2/3 in …

Process For Producing High Strength Alumina, James M. Staehler, William W. Predebon, Bruce J. Pletka

Michigan Tech Patents

A vacuum hot pressed alumina material having small, isometric grains; a uniform distribution thereof; relatively low, predominantly transgranular porosity; and a density approaching the theoretical density of pure alumina produced by vacuum hot pressing alumina powder which contains at least 98.0% alumina, is substantially free of any sintering aids or any other additives, and has a median particle size less than about 3 microns, in a vacuum hot press operated at a temperature of at least about 1350° C. and a pressure of at least 28 MPa (3500 PSI) for a sintering period of at least 1.5 hours. The vacuum …

Identification And Quantification Of Efficiency And Uniformity Components, Charles M. Burt, Albert J. Clemmens, Kenneth H. Solomon

BioResource and Agricultural Engineering

Proper usage of irrigation performance indicators such as uniformity and efficiency require standardized definitions and equations, specification of vertical and horizontal boundaries, inclusion of all pertinent components, and accurate measurement and estimation of those components. The quantification of some critical components is a challenge, and errors always exist.

Biquad Gm-C Structures Which Use Double-Output Transconductors, Vladimir I. Prodanov, Michael M. Green

Electrical Engineering

Two Gm-C biquad structures are derived. They use only two grounded capacitors and three transconductors, two of which have double-outputs. The realization of the double-output transconductors is discussed. It is shown that only two additional transistors are needed to convert a single-output transconductor to a double-output one suitable for implementation of the proposed structures. HSPICE simulations and experimental results of a 5-th order inverse Gaussian filter using the proposed biquad structures are given.

Tractor Test Museum Committee Minutes August 11, 1995, Tractor Museum

Lester F. Larsen Tractor Museum: Planning and Development Documents

Bid for Roof Replacement National Historic Site Additional Support

Scaling Of The Silicon-On-Insulator Si And Si1-Xgex P-Mosfets, Marijan PeršUn

Dissertations and Theses

Two-dimensional numerical simulation was used to study the scaling properties of SOI p-MOSFETs. Based on the design criteria for the threshold voltage and DIBL, a set of design curves for different designs was developed. Data for subthreshold slope, SCE and threshold voltage sensitivity to silicon film thickness are also given. Results show that short-channel effects can be controlled by increasing the doping level or by thinning the silicon film thickness. The first approach is more effective for p+ gate design with high body doping, while the second approach is much more effective for n+ gate design with low body doping. …

Data Allocation For Distributed Programs, Liono Setiowijoso

Dissertations and Theses

This thesis shows that both data and code must be efficiently distributed to achieve good performance in a distributed system. Most previous research has either tried to distribute code structures to improve parallelism or to distribute data to reduce communication costs. Code distribution (exploiting functional parallelism) is an effort to distribute or to duplicate function codes to optimize parallel performance. On the other hand, data distribution tries to place data structures as close as possible to the function codes that use it, so that communication cost can be reduced.

In particular, dataflow researchers have primarily focused on code partitioning and …

Design Of A Structured Light Sensor For In Situ Calibration, Fred W. Depiero, Reid L. Kress

Electrical Engineering

This paper highlights a ranging sensor that can be calibrated at standoffs of 1 to 3 feet with a depth of field of ≈ 1 ft. Tests at a 16" standoff have produced a 0.004 inch standard deviation in height measurement errors. The data density and field of view are programmable. The sensor is positioned robotically, allowing it to provide accurate, short-range measurements prior to manipulation tasks. The sensor head is relatively inexpensive (≈ $10k) and is designed for in situ calibration. This approach is intended to allow replacement components to be installed, calibrated, and validated without decontamination. Calibration, validation …

Ccfss Technical Bulletin August 1995, Wei-Wen Yu Center For Cold-Formed Steel Structures

CCFSS Technical Bulletins (1993 - 2020)

No abstract provided.

Fertigation - The Next Frontier, Charles M. Burt

BioResource and Agricultural Engineering

Just as irrigation dealers presently should specify pressure relief valves and air vents on all pipelined irrigation systems, future irrigation designs will incorporate a new generation of FERTIGATION (fertilization through the irrigation system) hardware. And farmers will use sophisticated techniques to monitor plant nutrient status and to determine the proper level of nutrients to spoon feed through fertigation.

Acuta Enews August 1995, Vol. 24, No. 8

ACUTA Newsletters

In This Issue

From the President

ISDN at MSU

Disaster Recovery

From ACUTA Headquarters: Emeritus Membership Status approved

Broadband Dynamic, Holographically Self-Recorded, And Static Hexagonal Scattering Patterns In Photorefractive Knbo3:Fe, Nickolai Kukhtarev, Tatiana V. Kukhtareva, John Caulfield, Partha P. Banerjee, Hsueh-Ling Yu, Lambertus Hesselink

Electrical and Computer Engineering Faculty Publications

We have observed and explained three types of hexagon pattern formation in photo refractive crystal KNb03:Fe. These are:

• Dynamic (laser induced)
• Semipermanent (holographically stored)
• Permanent (induced by a static domain grid) over a wide wavelength range