Engineering Commons^™

Artifactual Nonlinearity Due To Wear Grooves An Friction In Four-Point Bending Experiments Of Cortical Bone, L. V. Griffin, J. C. Gibeling, V. A. Gibson, R B. Martin, S. M. Stover

Biomedical Engineering

Experiments and analyses were performed to determine th e cause of a nonlinear force-deflection response observed in four-point flexural fatigue of beams ofcortical bone machined from the mid-diaphysis of the equine third metacarpus. Observable grooves which formed on the beam surface at supports and load noses were found to be the primary cause of the nonlinearity. An additional geometric nonlinearity at large deflections revealed by finite element modeling may be minimized by using the smallest diameter supports and load noses recommended in ASTM 790. However, frictional constraint of the beams at the load noses and supports can occur at low …

Analysis Of Background Noise For Wireless Microwave Lan Channels, Jason C. Hislop

Theses : Honours

Perusal of the details within, should provide the reader with an insight into general wireless indoor communications within the microwave spectrum, with respect to the problems laced, specific to noise corruption of the transmitted signal. Indoor communication systems are difficult to model, due to the largely random nature of the relevant environment, and the compounding factors that degrade system performance. These factors are many and varied, in accordance with the operational topologies of possible application area. However, there exists a common and increasing need to effectively model the communication links in question. Part of this strategy involves having an understanding …

An Investigation Into Manufacturing Execution Systems, K. W. Duley

Theses : Honours

Hardware and software developments of this decade have exposed an hiatus between business/management applications and process control in heavy industry in the implementation of computer technology. This document examines the development of discrete manufacturing and of relevant implementations of computing. It seeks to examine and to clarify the issues involved in a perceived current drive to bridge this gap, to integrate all the systems in a manufacturing enterprise in a Manufacturing Execution System (MES) in order to address two hypotheses: I) That overseas trends towards the development of manufacturing execution systems have application in the Australian industrial context. 2) That …

1996 Directory Of Indiana State, County, City And Town Officials Responsible For Road And Street Work, Herpicc

Indiana Local Technical Assistance Program (LTAP) Directory

Contact information for agency officials and employees responsible for Indiana’s local road infrastructure.

Test 1618: Valmet 8150 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 1646/1: Buhler Versatile 2210 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 1711: Case Ih 7240 Diesel 18-Speed (Chassis S/N Jja 0065000 And Higher), Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE

General

Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure.

The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1717: John Deere 5500 Diesel 9-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE

General

Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure.

The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1718: Agco Allis 9815 Diesel 18-Speed (Chassis S/N 902001pl And Higher), Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE

General

Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure.

The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1720: Agcostar 8360 Diesel 18-Speed (Cummins Engine), Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE

General

Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure.

The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1708: Case Ih 9370 Diesel 12-Speed (Chassis S/N Jee0036501 And Higher), Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE

General

Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure.

The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1710: Case Ih 7230 Diesel 18-Speed (Chassis S/N Jja0065000 And Higher), Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE

General

Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure.

The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Nebraska Summary: S249 New Holland 8260, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S219 New Holland 8770, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S220 New Holland 8870, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S258 Case-Ih Mx 120, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S221 New Holland 8970, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S218 New Holland 8670, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S217 White 6045, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S285 Valmet 8150, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Tracking Thermal Saturation Fronts By A High Level Pc Programming Language, A. Erkal, Daopu Thompson Numbere

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

This paper presents a PC based alternative procedure for determining the water saturations within the hot water zone of a thermal project for use in analytical oil recovery calculations. Conventional analytical calculation of oil recovery under steam and hot water injection requires the tracking of the movements of the saturations advancing within the variable-temperature hot-water zone. This involves an adaptation of the Buckley-Leverett theory to this variable temperature zone after dividing it into a number of constant temperature or isothermal zones. If the number exceeds two, the calculation can become very tedious unless done with a computer program. FORTRAN programs …

Structure And Phase Transformation Of Lanthanum Chromate, J. D. Carter, Harlan U. Anderson, M. G. Shumsky

Materials Science and Engineering Faculty Research & Creative Works

Lanthanum chromate (LaCrO4) was synthesized as a low temperature ( < 700°C) intermediate to perovskite-type, lanthanum chromite (LaCrO3). The lattice parameters, atom positions and bond lengths determined from X-ray powder diffraction show that LaCrO4 forms a monazite-type crystal structure. Lanthanum chromate forms a solid solution with Ca, having a solubility between 10 and 20 at %. Thermal analysis shows that at ambient oxygen pressure, LaCrO4 transforms to LaCrO3 at a temperature near 700°C. It also indicates that (La,Ca)CrO4 initially transforms to LaCrO3 and CaCrO4 with the subsequent formation of a (La,Ca)CrO3 solid solution. Evidence of Ca segregation to the surface of (La,Ca) CrO3 particles is given by Auger electron spectroscopy and scanning electron microscopy. © 1996 Chapman & Hall.

Unsteady Conjugate Mass Transfer Between A Single Droplet And An Ambient Flow With External Chemical Reaction, Leonid S. Kleinman, X. B. Reed

Chemical and Biochemical Engineering Faculty Research & Creative Works

Unsteady conjugate mass transfer between a spherical bubble, droplet, or particle and a surrounding fluid flow with chemical reaction in the continuous phase has been analyzed. An algorithm based on spectral methods has been developed and implemented for the simulation of the interphase mass transfer. The influence of Pe (convection) and Da (rate of external reaction), but in particular of D (diffusivity ratio) and H (distribution coefficient), which characterize the coupling features of the conjugate mass transfer, is studied in a wider range of parameters than earlier investigations. The asymptotic regime of mass transfer is investigated for long times, and …

Catalyst Bed Dilution For Improving Catalyst Wetting In Laboratory Trickle-Bed Reactors, Muthanna H. Al-Dahhan, Milorad P. Duduković

Chemical and Biochemical Engineering Faculty Research & Creative Works

The Catalyst Bed Dilution Technique Has Found Rather Widespread Applications as a Means of Producing Reliable and Reproducible Results for Successful Scale-Up and Scale-Down When Testing Commercially Used Catalyst Particle Sizes and Alternative Feedstocks in Small-Scale Laboratory Trickle-Bed Reactors. in Such Small-Diameter Laboratory Units When the Catalyst Used in Commercial Units is Employed as the Only Packing, Low Liquid Velocities Lead to Incomplete Catalyst Utilization Due to Incomplete External Catalyst Wetting, Liquid Maldistribution, and Wall Effects. Diluting the Bed with Fines is Recommended to Remedy These Shortcomings. the Effect of the Bed Dilution with Fines on Catalyst Wetting Efficiency, Pressure …

Evaluation Of Trickle Bed Reactor Models For A Liquid Limited Reaction, Yuanxin Wu, Muthanna H. Al-Dahhan, Mohan R. Khadilkar, Milorad P. Dudukovic

Chemical and Biochemical Engineering Faculty Research & Creative Works

The Isothermal Decomposition of Hydrogen Peroxide on a CuCr Catalyst in a Laboratory Scale Trickle Bed Reactor Was Used to Test Model Predictions of the Dependence of Liquid Reactant Conversion on Space Time for Different Operating Conditions. It is Assured that the Decomposition of Hydrogen Peroxide is a First Order Liquid-Limited Reaction. Comparison of Model Predictions and Experimental Data Indicates that Both External Mass Transfer Effects and Incomplete External Catalyst Wetting Need to Be Accounted For. Dudukovic's (1977) Approximate Model for the Catalyst Effectiveness Factor Adequately Simulates Both Effects.

Comparison Of Trickle-Bed And Upflow Reactor Performance At High Pressure: Model Predictions And Experimental Observations, M. R. Khadilkar, Y. X. Wu, M. (Muthanna) H. Al-Dahhan, M. P. Dudukovic, M. Colakyan

Chemical and Biochemical Engineering Faculty Research & Creative Works

Comparison of Laboratory Trickle-Bed and Up-Flow Reactors over a Range of Operating Conditions, Which Cover Both Gas and Liquid Reactant Limitations, Has Been Investigated using Hydrogenation of Alpha-Methylstyrene to Cumene in a Hexane Solvent over 2.5% Pd on Alumina Extrudate Catalyst as a Test Reaction. the Results Show that When the Reaction is Gas Limited at Low Pressure and High Liquid Feed Concentration, Trickle Bed Reactor Outperforms the Upflow Reactor. at High Pressure and Low Liquid Feed Concentration, the Reaction Becomes Liquid Limited and Upflow Reactor Performs Better. It is Concluded that the Advantage of Upflow or Downflow Depends on …

Comparison Of Upflow And Downflow Two-Phase Flow Packed-Bed Reactors With And Without Fines: Experimental Observations, Yuanxin Wu, Mohan R. Khadilkar, Muthanna H. Al-Dahhan, Milorad P. Duduković

Chemical and Biochemical Engineering Faculty Research & Creative Works

This Study Compares the Performance of Laboratory Trickle-Bed and Upflow Reactors over a Range of Operating Conditions, using the Hydrogenation of Α-Methylstyrene to Cumene in Hexane Solvent over 2.5% Pd on Alumina Extrudate Catalyst as a Test Reaction. It is Shown that the Trickle Bed Performs Better Than the Upflow Reactor at Low Pressures When the Reaction is Gas Limited, Due to Ready Access of the Gas to the Incompletely Externally Wetted Catalyst, While the Upflow Reactor Performs Better at High Pressures When the Liquid Reactant Limitation Controls the Rate, Due to the Completely Wetted Catalyst. Comparison of the Two …

A Decision Support Model For Large Systems Using Quality Function Deployment And Goal Programming: A Capital Budgeting Problem, Kenneth Lindsey Jr.

Engineering Management & Systems Engineering Theses & Dissertations

Effective planning for the modernization of U.S. Air Force fighter aircraft requires a perception of the future tasks these aircraft will be called upon to perform, and the improvements and modifications that will be required to successfully accomplish those tasks. A great deal of research has been done in the areas of military strategy, quality function deployment, capital budgeting, and goal programming, as separate areas of study. This thesis details the research and analysis performed for a project called The Fighter Configuration Plan (FICOP), in which these areas were integrated in a decision support model to aid the Air Force …

Gas And Liquid Phase Transport In Pulsed Fuel Sprays, Pete D. Jennings, James A. Drallmeier

Mechanical and Aerospace Engineering Faculty Research & Creative Works

An infrared extinction technique was used to characterize spatially and temporally the vapor phase of a transient fuel spray. Optical extinction data were taken at two laser wavelengths and compared to obtain fuel vapor partial pressure values averaged over the line-of-sight through the spray. A transient fuel injector spray was characterized at several axial positions with a spatial resolution of 0.125 cm and a temporal resolution of 0.2 ms. With the knowledge of an axisymmetric spray pulse, the line-of-sight averaged results were deconvoluted to obtain spatially resolved vapor pressure data. The same spray was also characterized using phase/doppler interferometry to …

Effect Of Inflow Pressure And Wall Heat Transfer On Shock-Induced Combustion/Detonation, B. S. Green, Harlan F. Nelson

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Oblique detonation waves are possible ignition mechanisms for scramjet engines. Results from a numerical study of the effects of changing the inflow pressure on oblique detonation wave structure for supersonic flow of a stoichiometric hydrogen-air mixture over a flat plate followed by a ramp are presented. Viscous effects and finite-rate chemistry are considered. Inflow pressure is varied from 0.1 to 1 atmosphere for Mach 4 inflow over a 30-degree ramp. Also, the effect of wall heat transfer rate is examined by comparing adiabatic wall, and constant temperature wall solutions. A separation bubble forms at the intersection of the flat plate …