Engineering Commons^™

Sources, Measurements, And Effects Of Segregated Hot Mix Asphalt Pavement, Ronald. Christopher Williams, Gary R. Duncan, Thomas D. White

JTRP Technical Reports

There are several factors that lead to segregation. Segregation can occur during stockpiling and handling of aggregate and during mixing, storage, transport and lay down of the asphalt mixture. Sometimes segregation may result from a single source or from a combination of sources. Nondestructive test methods have been examined to determine their effectiveness in detecting segregation. These methods include thermal imaging, air penneability, nuclear moisture (asphalt) and density, and permittivity. Based on the effective of these technologies in a laboratory environment, the standard moisture/density nuclear gauge technology was field tested with a high degree of success. Use of four minute …

The Use Of Pyrolized Carbon Black As An Additive (Part 3: Air Cooled Furnace Slag), Kwan-Ho Lee, C. W. Lovell, Rodrigo Salgado

JTRP Technical Reports

The purpose of this research was to characterize the fundamental properties and to evaluate the performance of asphalt mixtures modified by pyrolyzed carbon black (CBp) as an additive and air-cooled furnace slag as a coarse aggregate. Laboratory tests were conducted at INDOT and Koch Materials. The optimum binder content and the relationship of density and voids were determined from Marshall mix design. The rang of optimum binder content was 6.3% to 7.8%. The Marshall stability as a strength value and flow increased within the accepted ranges due to the inclusion of CBp. The gyratory tests were conducted by the US …

Use Of Coal Combustion Residues And Foundry Sands In Flowable Fill, Subnahmanya T. Bhat, C. W. Lovell

JTRP Technical Reports

The purpose of the present study is to investigate the use of waste foundry sand in flowable fill. However, the concepts developed are applicable to flowable fills containing any type of sand. Even though the flowable fill is presently popular as a trench filling material, this study addresses a much broader perspective in order to be able to develop uses of this material in geotechnical applications. In this research, only green sands were taken. The fly ash used was class F type. Flowability, hardening characteristics and 28-day unconfined compressive strength are studied. A rational approach the mix design of flowable …

Use Of Gps To Enhance Mapping By Photogrammetry, Robert D. Feeney, James Samuel Bethel, Boudewijn H. W. Van Gelder, Steve Johnson

JTRP Technical Reports

This research has sought to demonstrate the benefits of kinematic GPS in conjunction with photogrammetric aerial triangulation for mapping purposes. The work was performed with the existing INDOT aerial camera which is quite old, and while this affected the accuracy of the results, the demonstration of capability with a likely potential for excellent results was achieved. Ground point accuracies from the strip were in the sub-meter range with only a single control point. This is contrasted with full-model control requiring 50-80 control points for such a strip. In order to bring accuracies down to an acceptable level, i.e. sub decimeter, …

Using Pyrolized Carbon Black (Pcb) From Waste Tires In Asphalt Pavement (Part 2, Asphalt Binder), Yongdong Zeng, C. W. Lovell

JTRP Technical Reports

Scrap tires derived from automobiles have become a large environmental problem in the United States. In this study, research is carried out to investigate the potential use of tire-derived pyrolyzed carbon black from scrap tires as an asphalt cement modifier. The asphalt cements used in this research were AC10 and AC20. Penetration and softening point tests were performed to obtain the consistency of the asphalt cements. The pyrolyzed carbon black, as provided by Wolf Industries, was combined with the asphalt cement in the following percentages; 5%, 10%, 15% and 20%. Penetration, softening point and ductility tests were performed to determine …

Issues And Challenges In Validating Military Simulation Models, Michael R. Elmer

Theses and Dissertations

The purpose of this thesis is to address the challenges of validating simulation models, especially those challenges facing military simulation analysts. Three distinct issues are of concern to the military simulation analyst: (1) What type of validation effort do the academic experts recommend? (2) What does the military policy say is necessary for a proper validation effort? (3) What can a simulation practitioner realistically accomplish given time and resource constraints? Four methodologies were chosen to represent the academic perspective on validation. A model of validation methods is integrated from the methodologies of these four simulation validation references. The validation policies …

Flash Adc Using 2Μm Cmos P-Well Technology : Design And Test, Joseph E. Levinson

Theses

This thesis describes the design, implementation and test for a new CMOS analog-to-digital converter IC chip. In designing the analog-to-digital converter in this thesis a radically different comparator design that is only available with CMOS logic. The design utilizes a single CMOS inverter as an ultra-high gain amplifier. This approach reduces the circuit dependence upon matching of the transistors similar to the traditional method. This new design requires less area since the comparator utilizes fewer transistors.

Flash analog-to-digital converters use 2" - 1 comparators to do a single conversion where n is the number of bits used. These comparators are …

A Framework For Integrated Communication And I/O Placement, Rajesh Bordawekar, Alok Choudhary, J Ramanujam

Electrical Engineering and Computer Science - All Scholarship

This paper describes a framework for analyzing dataflow within an out-of-core parallel program. Dataflow properties of FORALL statement are analyzed and a unified I/O and communication placement framework is presented. This placement framework can be applied to many problems, which include eliminating redundant I/O incurred in communication. The framework is validated by applying it for optimizing I/O and communication in out-of-core stencil problems. Experimental performance results on an Intel Paragon show significant reduction in I/O and communication overhead.

Test 1649/1: Buhler Versatile 2145 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 1648/1: Buhler Versatile 2160 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 1633: Valmet 8550 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 941: John Deere 3020 Syncro-Range Gas, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Effects Of Pyrolysis Heating Rate On Intrinsic Reactivities Of Coal Chars, Thomas K. Gale, Calvin H. Bartholomew, Thomas H. Fletcher

Faculty Publications

The main objective of this work was to determine the effects of pyrolysis heating rate on intrinsic O₂ reactivity of coal chars. Relationships of intrinsic reactivity to other pyrolysis conditions and char physical and chemical structure were also investigated, and empirical correlations were obtained. Two different entrained flow reactors (a flat flame methane/air burner and a drop tube reactor) were used to prepare chars under a variety of different pyrolysis conditions at maximum particle temperatures and heating rates of 840-1627 K and 10⁴ to 2x10⁵ K/s, respectively. Intrinsic reactivities of a lignite and two bituminous coal chars …

University Of Texas At Tyler Catalog, 1996-1998, University Of Texas At Tyler

Catalogs

Archives Space instance: https://archivesspace.uttyler.edu/repositories/2/archival_objects/22364

Minimum Ventilation For Modern Broiler Facilities, Richard S. Gates, Douglas G. Overhults, Shuhui H. Zhang

Biosystems and Agricultural Engineering Faculty Publications

New functions for whole-house broiler heat production as a function of bird age using modern straight run broiler growth rates are presented and compared to values in the literature. The approximations are based on field measurements of environmental conditions in modern broiler housing, using a technique that matches predicted to actual fuel use to estimate partitioning between latent and sensible heat. Development of a program utilizing these approximations to compute ventilation and heating requirements for temperature and humidity control in broiler housing is described. The program utilizes steady-state heat and moisture balances commonly used for design purposes, with hourly or …

Test 1709: Case Ih 7220 Diesel 18-Speed (Chassis S/N Jja0065000 And Higher) Also Case Ih 8920 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE

General

Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure.

The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1714: Case Ih 9380 Diesel 12-Speed (Chassis S/N Jee0036501 And Higher), Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1791: New Holland 9882 Quadrasync Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Nebraska Summary: S297 Valmet 8550, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 1706: Caterpiller Challenger 65d Diesel 10-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE

General

Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure.

The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1707: Case Ih 9350 Diesel 12-Speed (Chassis S/N Jee0036501 And Higher), Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1713: Case Ih 9330 Diesel 12-Speed (Chassis S/N Jee0036501 And Higher), Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE

General

Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure.

The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1715: Belarus 532 And 530 Diesel 9-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE

General

Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure.

The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1712: Case Ih 7250 Diesel 18-Speed (Chassis S/N Jja0065000 And Higher), Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE

General

Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure.

The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1716: Belarus 900, 905, 920 And 925 Diesel 18-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE

General

Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure.

The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1719: White 6215 Diesel 18-Speed (Chassis S/N 602001pl And Higher), Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1721: Agcostar 8425 Diesel 18-Speed (Cummins Engine), Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE

General

Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure.

The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Nebraska Summary: S253 New Holland 8560, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S251 New Holland 8360, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S246 New Holland 6635, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …