Engineering Commons^™

Design Of A Second-Order Filter Using The GM-C Technique, Girish Chandrasekaran

Dissertations and Theses

This thesis deals with the design, layout, fabrication, testing and characterization of a second-order filter (biquad) using the transconductance-C (g_m-C) technique. The biquad was designed to realize the four filter functions - lowpass, highpass, bandpass and notch - by appropriate choice of input and output terminals and element values. The tunable range of frequencies for the biquad was designed to be 18-59MHz. The quality factor of the biquad was designed to be tunable from approximately 1/3 to 3. The filter was designed in LEVEL2 SPICE, laid out using MAGIC, and the circuit was fabricated using MOSIS's …

Maximum Likelihood Estimation Of Exponentials In Unknown Colored Noise For Target In Identification Synthetic Aperture Radar Images, Matthew P. Pepin

Theses and Dissertations

This dissertation develops techniques for estimating exponential signals in unknown colored noise. The Maximum Likelihood ML estimators of the exponential parameters are developed. Techniques are developed for one and two dimensional exponentials, for both the deterministic and stochastic ML model. The techniques are applied to Synthetic Aperture Radar SAR data whose point scatterers are modeled as damped exponentials. These estimated scatterer locations exponentials frequencies are potential features for model-based target recognition. The estimators developed in this dissertation may be applied with any parametrically modeled noise having a zero mean and a consistent estimator of the noise covariance matrix. ML techniques …

Study Of Stress In Microelectronic Materials By Photoelasticity, Hancheng Liang

Dissertations

The study of stress is playing an important role in microelectronic technology. In comparison with other techniques, the photoelasticity technique has the advantages of having high spatial resolution and high sensitivity. It can be used in qualitative observation in real-time and quantitative determination of stress distribution in the microelectronic materials and devices.

This dissertation presents a systematic study of photoelastic stress analysis in microelectronic materials and devices, ranged from theoretical study to practical system setup, from measurement methods to their applications. At first, based on the detailed survey on the piezo-optic properties of the crystals used in microelectronics, we apply …

Reaction Kinetics Of Methanol And Mtbe Oxidation And Pyrolysis, Wen-Chiun Ing

Dissertations

This study presents experimental data on the decomposition of methanol in several different reaction environments - fuel lean to stoichiometric at a temperature range of 873 and 1073 K and a pressure range of I and 5 atm. Methane fuel is also added in several of the systems studied in order to provide experimental data to understand the methanol addition effect on the methane oxidation.

Computer codes: ThermCal, ThermSrt and ThermCvt have been developed for the thermal property calculations of stable molecules by the Benson group additivity method and of radicals by the NJIT hydrogen bond increment method.

Pressure dependent …

Acuta Enews October 1996, Vol. 25, No. 10

ACUTA Newsletters

In This Issue

President's Message

FlexSourcing

Desk Top Video

Overheard on the Listserve

From ACUTA Headquarters

Ole Miss Engineer 1996

Ole Miss Engineer

No abstract provided.

Santa Clara Magazine, Volume 38 Number 4, Fall 1996, Santa Clara University

Santa Clara Magazine

4 - ENTER THE CLASS OF 2000 They're committed, they're ambitious, they're adventurous-and they're here! By Christine Courard '97 Photographs by Charles Barry

10 - A COMMUNITY OF SCHOLARS FOR THE COMMON GOOD Unique gifts of students, facu lty, staff, and alumni advance University efforts to integrate learning and living. By Paul Locatelli, S.J, '60

13 - HEADY DAYS, MYLANTA NIGHTS Riding the roller coaster of high tech investing. Coming out on top. By Therese Poletti '81

18 - THE TAO OF PERSONAL LEADERSHIP New book by English Department chair describes how ancient Chinese philosophy can help leaders bring a …

Bulletin - Fall, 1996, Civil Aviation Medical Association

Browse all Civil Aviation Medical Association Newsletters

A twelve page newsletter of the Civil Aviation Medical Association. The newsletter provided news about civil aviation medicine and information related to the organization.

Detection Of Fatigue Crack Growth In A Simulated Aircraft Fuselage, Michael Lee Marsden

Master's Theses - Daytona Beach

Acoustic emission (AE) nondestructive testing can detect fatigue cracks as they occur in complex structures. One use for AE has been in-flight detection of fatigue cracks in aircraft. The KC-135 aircraft were successfully monitored as early as 1979. The main problem with this and subsequent applications was an unfavorable signal to noise ratio, the key being to separate the small amplitude crack signals from the large amplitude ambient noise. This was accomplished here through the use of a Kohonen self-organizing map (SOM) neural network.

In order to simulate a fuselage undergoing fatigue, a pressure vessel was constructed from a 0.040 …

Numeric Keyboard Layouts: An Ergonomic Approach, Tricia S. Lowe

Master's Theses - Daytona Beach

This study investigated the most effective method of numeric data entry, by means of a numeric keypad. The methods of numeric data entry were (a) two keypads with different numerical configurations, (b) two keypads with identical numerical configurations, and (c) one keypad with only a single numerical configuration. The two configurations utilized were the telephone and the calculator. An experimental design, with focus on the post-test only control group, was utilized. Sixty randomly selected students from the population attending Embry-Riddle Aeronautical University were assigned to five experimental groups.

The results indicated no significant differences: (a) for the number of errors …

A Methodology For The Prediction Of The Empennage In-Flight Loads Of A General Aviation Aircraft Using Backpropagation Neural Networks, Maciej Marciniak

Master's Theses - Daytona Beach

Backpropagation neural networks have been used to predict strain resulting from the maneuver in-flight loads in the empennage structure of a Cessna 172P. The purpose of this research was to develop a methodology for the prediction of strain in the tail section of a general aviation aircraft and to determine the minimum set of sensors necessary to adequately train the neural networks. Linear accelerometer, angular accelerometer, rate gyro, and strain gage signals were collected in flight using DAQBook portable data acquisition system for dutch-roll, roll, sideslip left, sideslip right, stabilized g turn left, stabilized g turn right, and push-pull maneuvers …

Heat Transfer In Microchannels, Xianming Wang

Doctoral Dissertations

The objective of this research was to develop an analytical solution to the heat transfer problem in microchannels with slip-flow--a heat transfer problem for gases at low pressures or in extremely small geometries, and to verify this solution experimentally. In this investigation, an analytical expression for the velocity distribution with slip-flow was obtained which involved the Knudsen (Kn) number in an infinite series form. The result showed that the velocity always increased as the Knudsen number was increased. The Knudsen number for extremely small channels may become large enough to affect significantly the velocity distribution and consequently affect the heat …

Wright State University College Of Engineering And Computer Science Bits And Pcs Newsletter, Volume 12, Number 8, October 1996, College Of Engineering And Computer Science, Wright State University

BITs and PCs Newsletter

A ten page newsletter created by the Wright State University College of Engineering and Computer Science that addresses the current affairs of the college.

Sensitivity Analysis In Cellular Manufacturing System In The Case Of Product Mix Variation, Hamid Seifoddini, Manocher Djassemi

Industrial Technology and Packaging

In this paper, performance measures such as mean flow time and work-in-process inventories will be used to determine the changes in the performance of a cellular manufacturing system due to product mix variations.

Generation Of Synthetic-Focus Images From Pulse-Echo Ultrasound Using Difference Equations, Daryl G. Beetner, R. Martin Arthur

Electrical and Computer Engineering Faculty Research & Creative Works

To produce a complete-dataset, pulse-echo image requires a knowledge of the time of flight (TOF) from each source to each sensor in the transducer array for each site to be imaged. Increasing the speed of TOF calculation is important in adaptive-focus schemes. The authors determined TOF more rapidly than via direct calculation by representing TOF surfaces by two-dimensional (2-D), positive-integer-degree polynomials implemented in their forward-difference form. Errors which accumulate due to the use of a difference equation depend on the degree of the polynomial and on the size of the image. The number of bits needed to address echo samples …

Infrared Quarter-Wave Reflection Retarders Designed With High-Spatial-Frequency Dielectric Surface-Relief Gratings On A Gold Substrate At Oblique Incidence, Jian Liu, Rasheed M.A. Azzam

Electrical Engineering Faculty Publications

One- and two-dimensional high-spatial-frequency dielectric surface-relief gratings on a Au substrate are used to design a high-reflectance quarter-wave retarder at 70° angle of incidence and 10.6-μm light wavelength. The equivalent homogeneous anisotropic layer model is used. It is shown that equal and high reflectances (>98.5%) for the p and the spolarizations and quarter-wave retardation can be achieved with two-dimensional ZnS surface-relief gratings. Sensitivities to changes of incidence angle, light wavelength, grating filling factor, and grating layer thickness are considered.

Resource/Dataflow Graph Operating System Development, Sriram J. Coimbatore

Electrical & Computer Engineering Theses & Dissertations

Implementation of a new dataflow schedule model is the objective of this thesis. The dataflow model algorithm called the resource/dataflow graph model is implemented on a peer-to-peer communication network comprising of six personal computers. This dataflow model is implemented making use of an earlier dataflow model called ATAMM (Algorithm to Architecture Mapping Model) developed by ODU and National Aeronautics and Space Administration (NASA). Development issues include modification of the RDFG testbed operating system and a scheme to transfer data buffers using the ethernet channel from one processor to another processor. This, in turn, equips each sub-module of an application with …

Real-Time Visual Speech Articulation Training Aid, Neiyer S. Correal

Electrical & Computer Engineering Theses & Dissertations

A real-time visual articulation training aid has been implemented. It provides instantaneous visual feedback of vowel and stop-consonant production on a computer screen. The vowel training system corresponds to an improved floating-point implementation of a previous fixed-point system developed by Beck (1992). The new implementation provides better accuracy and an approximate five-fold increase in speed. Acoustic features computed from global short-time spectral shape are used for classification of vowels. Temporal spectral trajectories timed to begin with burst onset are used for stop consonants. A neural network is used to transform measurements of auditory stimuli from the feature space to a …

Parametric Correlations For Generic Scramjet Combustors With Ramp-Type Injectors, Jason Granville Bush

Mechanical & Aerospace Engineering Theses & Dissertations

Development of an efficient scramjet combustor requires the use of computational models due to the cost of full-scale physical testing in the speed regime of Mach 10 through Mach 18. This study focuses upon the database generated by one such computational model, SHIP3D, which describes a generic scramjet combustor using ramp-type file! injectors. Three generalized parametric equations have been developed from this database, which describe the fuel-air mixing efficiency within the scramjet combustor as a function of normalized-axial combustor distance, ramp injector-region lift coefficient, and stoichiometry. It is shown that one of the three equations nearly models the trends as …

Effects Of Initial Geometric Imperfections On The Behavior Of Graphite-Epoxy Cylinders Loaded In Compression, William Allen Waters Jr.

Mechanical & Aerospace Engineering Theses & Dissertations

The results of an experimental and analytical study of selected composite cylinders loaded in axial compression beyond buckling are presented. A comparison is made of buckling loads predicted by a nonlinear finite element code and those obtained from laboratory experiments. The initial geometric imperfections for each specimen were defined mathematically for inclusion in the finite element model. The experimental effort consisted of testing five graphite-epoxy cylindrical specimens. Four of the specimens were 16 plies thick; one of these had quasi-isotropic wall properties, another consisted entirely of angle plies, while the remaining specimens of this wall thickness were of two different …

The Effectiveness Of Film Cooling In A Hypersonic Flowfield With Favorable Pressure Gradients, Julie A. Young

Mechanical & Aerospace Engineering Theses & Dissertations

The impetus of this technical document is to report results of aerothermodynamic cooling of a scramjet nozzle under favorable pressure gradients. The goals of film cooling are to protect the nozzle skin from the high enthalpy combustor flow, reduce regenerative cooling requirements, and decrease nozzle skin friction. A hypersonic nozzle configuration for which experimental data exists was selected as the basis of this numerical study. As a first step, the numerical results of film cooling along a flat plate are compared to previous literature to validate the numerical model. Subsequently, computations are performed to study the effects of varying the …

Characterization Of Rainfall Runoff Quality From A Shipyard Drydock, Peter Pommerenk

Civil & Environmental Engineering Theses & Dissertations

Water quality and hydrological data were collected during seventeen rain events and additional data was obtained from laboratory experiments to characterize the quality of stormwater runoff from a drydock located on the Elizabeth River in Norfolk, Virginia.

The results indicated that the concentrations of dissolved constituents in drydock runoff increased with decreasing flow rate, while solids concentrations exhibited positive correlation to flow rate, suggesting that the mobilization of particulate matter is velocity driven. Approximating the runoff hydrograph due to a storm event using a simple model enabled derivation of the average time that rainwater resides on the drydock surface before …

An Experimental Study Of An Advanced Polymeric Material For Use In Total Knee Replacements Including Gait Analysis Of Mobile Knee Bearings, Lisa Ann Scott

Mechanical & Aerospace Engineering Theses & Dissertations

The primary objectives of this research were to clinically examine the New Jersey Low Contact Stress (LCS)™ Rotating Platform and Meniscal knee bearing systems and to investigate the tribological properties of a new polymer for potential application in total joint replacement. Thus, clinical studies were performed on subjects having the LCSTM Rotating Platform knee bearing and subjects having the LCS™ meniscal knee bearing. The results indicated that there was a statistically significant difference in the braking force for both implant groups when compared to a control group. There was also a statistically significant difference noted for the LCS™ Rotating Platform …

The Crash Simulation And Analysis Of The Friendly Mobile Barrier, Bryan Edward Marz

Mechanical & Aerospace Engineering Theses & Dissertations

Mass transportation is an ever increasing alternative being researched and evaluated in today's society. With the increase of demand for such transportation, an increase in safety is also needed. This research entails the analysis of a new idea, The Friendly Mobile Barrier, in railroad crossing barrier design. The design is meant to prevent any approaching vehicle from crossing a railroad track and be survivable for those impacting the barrier.

Research conducted involves the crash simulation and analysis of the Friendly Mobile Barrier. The Friendly Mobile Barrier was analyzed structurally using finite element analysis. An advanced lumped-mass mathematical model software, Crash …

A Fluid Flow Analysis Of Aluminum 356.0 In The Vacuum Assisted Countergravity Method, John Launstein

Graduate Research Papers

The purpose of this study is to determine the fluid flow pattern obtained through the use of the countergravitaional process. The physical fluid flow model assists design engineers in their casting design of parts utilizing the LS-Vac technology thereby reducing tooling costs and time losses.

Trading With China - An Opportunity With Historic Precedent, Tim Brady

Publications

Dr. Brady writes about the future growth of Chinese industries with a focus on the impact of their growth on the aviation community in the United States. The opportunities for trade are enormous and should be handled with an in-depth knowledge of Chinese culture. Opportunities in higher education also abound.

Monte Carlo Simulations Of Photoemission Characteristics From Gaas And Diamond, Abhishek Srivastava

Electrical & Computer Engineering Theses & Dissertations

Monte Carlo based numerical simulations were performed to study photoemission from GaAs and diamond. The central goal was to assess the potential for NEA photoemission from diamond, and to predict its characteristics. The GaAs material system was also included in the simulation study to provide: (i) calibration and validation of the numerical model developed by carefully matching the simulation results with available experimental data, and (ii) quantitative comparisons between the response characteristics of diamond and the better known GaAs system.

Predictions of the energy distribution, temporal response and angular distribution of emitted electrons were obtained. Effects of various parameters, such …

Development And Experimental Verification Of A Finite Element Model For Ptc Panel Thermal Analysis, Hamid Sayar

Mechanical & Aerospace Engineering Theses & Dissertations

The Pyramidal Truss Core (PTC) panel is a new structural concept being used in applications requiring a high strength to weight ratio. This study is concerned with investigating the thermal characteristics of the PTC panels. In this regard, the focus of the analysis was to develop an accurate finite element model of PTC panels for thermal analysis. The resulting model included radiation mode of heat transfer as the dominant means of the heat transfer while neglecting the influence of heat transfer through natural convection. The accuracy of the developed model was verified by comparison of the finite element results with …

Robotic Arm Design For Compressor Handling, Eve Blair

Honors Capstone Projects and Theses

No abstract provided.

Dynamics And Control Of A Three Dimensional Gantry Crane With Cable Flexibility, Uchendu H. Eke

Mechanical & Aerospace Engineering Theses & Dissertations

The control of payload swing in industrial gantry cranes is a topic of widespread interest. In this thesis, the control of the swing of a payload idealized by a point mass assumption is investigated utilizing s, compact robotics matrix/vector representation of the dynamical model. In this form, this particular system can be viewed as sn underactuated manipulator with equal numbers of active and passive degrees of freedom. The full three dimensional model is developed and linearized by modelling the cable as a single thread of fiexible wire and the degree of dynamic coupling between the active and passive coordinates is …