Engineering Commons^™

Analysis And Modeling Of Ultrasound Enhanced Soil Washing Process, Kamalavathany Rajaratnam

Theses

In this research, statistical analysis of data from ultrasound enhanced soil washing process was performed. The process was optimized using a statistical model. The model had four factors namely power, solvent:soil, surfactant, and dwell time as process variables. The percentage of removal efficiency was considered as the dependent variable. The results from two full and one partial factorial designs were analysed. Interactions up to third order were considered in the analysis, but the results from full factorial design showed that those of order higher than second had insignificant contributions to the removal of contaminants. Since the higher order interactions of …

Determination And Studying Of Stress Distribution In Various Ankle-Foot Orthoses : Experimental Stress Analysis, Rong Feng

Theses

Ankle-Foot Orthosis (AFO) is prescribed to constrain and inhibit abnormal motion such as "drop foot" due to stroke. Most orthoses were hand-made by orthotists according to their own experience. However, some types of AFO were easy to fatigue (out of their functional capabilities) than others due to regular usage. In order to improve the design and usage, quantitative stress analysis of different types of orthoses is needed. The objective of this project is to obtain experimental data which will confirm the results obtained from previous Finite Element Analysis (FEA)^[1]. In addition, the experimental analysis is extended to obtain …

Analysis And Comparison Of Resistive, Ferroelectric And Pyroelectric Uncooled Bolometers For Electronic Imaging Systems, Mo-Huang Li

Theses

The performance parameters (responsivity (R_v). detectivity (D*), total noise and response time) of resistive, pyroelectric and ferroelectric bolometer detectors are dependent on a large number of key variables including chopping frequercy, the input impedance and voltage noise of the readout circuitry, the structure dependent parameters (particularly thermal conductance and thermal capacitance), and material properties such as dielectric constant, pyroelectric coefficient, loss tangent and thin film thickness. The interrelationship between the key variables and their influence on performance is often complex and not easily discerned for the three major types of thermal detectors: resistive, pyroelectric and ferroelectric bolometers.

In …

Design Improvement Using Reverse Analysis In Design For Quality Manufacturability, Vikram V. Datla

Theses

The competitive needs of modern manufacturing demands that innovative approaches be used to gain an edge over the competitors. least Product design is one of the key dimensions wazzu in which companies can excel. Shortening the product design cycle so as to rapidly launch defect free products, is the goal of most companies. Design for Quality Manufacturability (DFQM) is a technique used to evaluate the quality manufacturability of a product at the design stage, so as to eliminate quality problems during production.

DFQM provides a means for relating the activities of quality improvement, product design and manufacturability analysis. The basis …

Mechanical Evaluation Of Pedicle Screw Fixation Of The Lumbar Spine, Ding Lu

Theses

Pedicle screw fixation of the lumbar spine has been reported to increase fusion rates A biomechanical evaluation of four different pedicle screw implant systems, (AO. Rogozinski, TSRH and Wiltse). was performed to compare intrinsic device stiffness under conditions of flexion-compression and forty-five degree off-axis flexion-compression The effect on stiffness of the loosening of device members was also studied. Testing was done in load control using an electrohvdrualic testing machine. UHMWPe blocks are used to simulate the vertebra.

Assuming that stiffness is directly proportional to the probability of obtaining fusion. this study allows the ranking of the systems tested in their …

Heat Transfer Enhancement From A Heat Pipe Immersed Horizontally In Water, Under Natural Convection Conditions, With The Aid Of Gas Injection, Evangelos J. Minakas

Theses

An experimental study has been performed to estimate the degree of heat transfer enhancement from a horizontal heat pipe, immersed in water with the aid of air injection. This thesis investigates the effects of different shroud shapes, shroud distances from the heat pipe, air injection rates, air injection configurations and air injection distances on the augmentation of heat transfer. Water was the experimental fluid and its temperature ranged from 17-60 °C, the surface temperature of the heat pipes varied from 18-75 °C.

It was discovered that the shape of the shrouds is a contributing factor on the heat transfer enhancement. …

Computer Simulation Of Cerebrovascular Circulation : Assessment Of Intracranial Hemodynamics During Induction Of Anesthesia, Steven D. Wolk

Theses

The purpose of this project was to develop a computer model of cerebrovascular hemodynamics interacting with a pharmacokinetic drug model to examine the effects of various stimuli during anesthesia on cerebral blood flow and intracranial pressure.

The mathematical model of intracranial hemodynamics is a seven compartment constant volume system. A series of resistances relate blood and cerebrospinal fluid fluxes to pressure gradients between compartments. Arterial, venous, and tissue compliance are also included. Autoregulation is modeled by transmural pressure dependent arterial-arteriolar resistance. The effect of a drug (thiopental) on cerebrovascular circulation was simulated by a variable arteriolar-capillary resistance. Thiopental concentration, in …

The Study Of Permeability In Concrete, Jie Yuan

Theses

In this study, samples of regular, high performance, expansive and the polymer concrete and mortar were prepared for test of permeability and mechanical property. In the permeability measurement, water and an aqueous chemical solution were employed as the permeant.

The test results of the samples, ranging from 5.7 x 10-9 cm/sec to 1.0 x cm/sec for the permeability and 3800 psi to 10600 psi for compression strength, indicated that the polymer coated concrete has the lowest permeability among the concretes and high performance concrete has the highest compression strength . The finding leads to the possibility that a high strength …

An Analytical Approach To Toxic Substance Replacement In Support Of Pollution Prevention, Ithan B. Zimmer

Theses

In support of pollution prevention and in accordance with Executive Order 12356 concerning pollution prevention, all federal agencies must comply with the Toxic Release Inventory (TRI) chemical release reduction and pollution prevention planning. The inventory lists hundreds of chemicals and choosing those to replace and finding actual replacement chemicals or procedures is not always clear. This study focuses on an analytical approach to this problem by understanding the application of two substances. The representative chemicals are two volatile organic compounds (VOC), ethyl ether and ethanol, used as solvents in ammunition manufacturing.

Thirteen military specifications provide the cases involving ether. Ethanol's …

Low Frequency Characterization Of A Loop Antenna, Irene Koukhta

Theses

The conventional solution of an integral equation for the loop antenna in free space can be expressed analytically using Fourier Series. However, the solutions based on delta gap feed model yield divergent input susceptance.

To overcome such diverging results, alternative solution using equivalent magnetic frill current feed models were implemented. Although low frequency models for delta gap feeds were suggested, no generalized low frequency expansions for the input admittance have been reported previously. In this work, such generalized low frequency expansion are developed for both delta-gap and magnetic frill feeds of loop antennas. Validity of such expansion have been investigated …

Enhancing The Bioavailability Of Sorbed Pollutants From Sediments Using Ultrasound, Rachel Mathew

Theses

Many organic compounds, that enter aquatic systems have a strong tendency to sorb onto particulate matter which may be present in suspension or as sediment. Numerous studies have shown that the sediment in aquatic systems concentrate contaminants several orders of magnitude greater than the concentration in the aqueous phase. Particulate associated contaminants in sediments are not easily bioavailable. Hence the efficacy of any treatment technology would be strongly undermined if the contaminants are not made available for microbial utilization. Sediment associated contaminants can be made biologically available to various microorganisms under certain conditions.

In this study, desorption studies were conducted …

Hydrocatalysis: A New Energy Paradigm For The 21st Century, Peter Mark Jansson

Theses and Dissertations

This thesis will review the problems of worldwide energy supply, describe the current technologies that meet the energy needs of our industrial societies, summarize the environmental impacts of those fuels and technologies and their increased use by a growing global and increasingly technical economy. This work will also describe and advance the technology being developed by BlackLight Power, Inc. [BLP], a scientific company located in Malvern, Pennsylvania. BLP's technology purports to offer commercially viable and useful heat generation via a previously unrecognized natural phenomenon - the catalytic reduction of the hydrogen atom to a lower energy state. A review of …

Effects Of Tunneling Electrons And Local Field On Nanometer Region Solid / Liquid Interfacial Reactions ——Potential Controlled Stm Induced Nanoscale Modification Of H Terminated Si(111) Surfaces, Zhaoxiong Xie, Xiongwei Cai, Caihui Shi, Bingwei Mao, Zhaowu Tian

Journal of Electrochemistry

H-terminated n-Si(111) surface was found to be etched in 0.5% HF solution in nanometer scale while scanning the STM tip when the substrate potential was somehow lower than the open circuit potential at tunneling condition of V_b=+1.0 V (tip positive), I_t=1 nA. Much more stable Si surface was achievable at potentials much more negative than the open circuit potential (such as 500 mV negative to OCP) under the same tunneling condition. Furthermore, the etching rete at less negative potential was found to be somehow related to the tunneling current. These results indicate that the STM induced …

Studies Of Electrocatalytic Properties Of Electrode Of Dispersed Pt On Gc Support In Ethylene Glycol Oxidation, Shengpei Chen, Shigang Sun, Zhiyou Zhou, Shuanjing Hong

Journal of Electrochemistry

The structures and properties of electrocatalyst of dispersed Plutinum (Pt) on glassy carbon (GC) support under different conditions were studied using cyclic voltammetry, potential step technique, X-ray diffraction (XRD) and scanning Electron microscopy (SEM). The results indicated that after having been treated in high temperature,the dispersed Pt on GC support was recrystallised with preferented orientation, and the grain of Pt microcrystal become large and regular. It was illustrated that the dispersed Pt on GC support after high temperature treatment exhibited better stability and high activity for ethylene glycol oxidation.

Polymer Electrolyte Fuel Cell Powered Vehicles, Naichao Li, Baolian Yi

Journal of Electrochemistry

The background, status and commercialization prospect of polymer electrolyte fuel cell vehicles are surveyed in this paper. The technology of this cell and system used in vehicles is discussed.

Electrochemical Behavior Of Superoxide Dismutase On Gold Minigrid With Thin Layer Cell, Xiaqin Wu, Qian Liu, Bin Xu, Xiaoyun Men, Zongrang Zhang

Journal of Electrochemistry

The electrochemical behavior of superoxide dismutase (Cu, Zn-SOD) was investigated on gold wire electrode and gold minigrid with thin layer cell by cyclic voltammetry. A quasi reversible redox wave of SOD has obtained on gold minigrid thin layer electrode, but only oxidation peak has observed on gold wire electrode. The electrochemical reaction parameters, such as the formal potential E^0′, diffusion coefficient D and standard rate constant k^0′ were estimated.

Electrodeposition Of Amorphous Fe-Cr Alloy Coating, Danhong Cheng, Weiyi Xu, Yiqin Qin, Liqun Hua, Zhongyan Zhang

Journal of Electrochemistry

The amorphous Fe-Cr alloy coatings were obtained by controlling the composition of bath operation conditions. It was found that the pH value, the current density and the content of chromium in Fe-Cr alloy coatings effect the amorphous structure of the coatings. The result of anodic polarization shows that the corrosion resistance of the amorphous coatings in acidic media is higher than the corrosion resistance of the crystal ones.

An Analysis On The Microstructure Of Electrodeposited Zro2-Ni Functionally Graded Materials, Chengjun Quan, Xinghua Xiang, Jingchuan Zhu, Zhongda Yin

Journal of Electrochemistry

The electrodeposited ZrO₂-Ni functionally graded coating was fabricated by controlling the ZrO₂ concentration in the bath, and the microstructure was analyzed by X-Ray Diffraction (XRD) and Electron Probe Microanalysis (EPMA). The results show that the functionally graded coating has excellent compositional gradient distribution from the substrate to the surface. The content of ZrO₂ is up to 14.4 vol% in the surface layer and the coating consists of the t-ZrO₂, m-ZrO₂ and Ni phases. Owing to the ZrO₂ particles pressed by Ni atoms during electrodepositing, t→m transformation has occurred.

Studies On Electrodeposition Of Rare Earth Metals And Their Alloys In Molten Salts, Qiqin Yang

Journal of Electrochemistry

The cyclic voltammetry, convolution voltammetry, potentiostatic electrolysis and open circuit potential time curve after electrolysis, current time curve at potential step, potential time curve at current step, X-ray diffraction, EDAX, electron probe microanalysis were used to investigate the electrode processes of the reduction of rare earth ions on inert electrodes and alloying electrodes in molten chlorides and fluorides. The free energies of formation for the intermetallic compounds, the diffusion coefficients of rare earth ions in the melt, the diffusion coefficients of rare earth atoms in the alloy phases were determined. The alloys of rare earth with iron, cobalt, nickel, copper, …

Surface Modification Of Molten Carbonate Fuel Cell Anode, Baizeng Fang, Xinyu Liu, Xindong Wang, Shuzhen Duan

Journal of Electrochemistry

In this study, the anode material of molten carbonate fuel cell was modified by the deposition of niobium on nickel surface. The results of polarization experiments reveal that the corrosion resistant properties as well as electrocatalytic activity have been improved greatly.

Study Of Electrodepositing Bright Tin Cobalt Zinc Alloy From Weak Acid Solution, Zhengzhong Zuo, Runxiang Hou, Shaochun Xia

Journal of Electrochemistry

A new process of electrodeposting bright Tin Cobalt Zinc alloy from weak acid solution is proposed in this paper. The solution compositions and operating conditions are Na₃C₆H₅O₇·2H₂O 100～150, Na₂EDTA·2H₂O 20～30, SnCl₂·2H₂O 15～20, CoSO₄·72H₂O 25～35, ZnCl₂ 15～20 g·L^-1; stabilizer WDZ-160～100, brightener WDZ-215～20 mL·L^-1; pH=4～6, D_K=0.5～5.0 A·dm^-2, T=5～35 ℃. A bright Sn-Co-Zn deposit having Co about 0.5～3.5% and Zn about 1～10% is produced. The effects of bath compositions on Co or …

Electroluminescence Of Photoelectrochemically Etched N+-Si, Guozheng Li, Chengqian Zhang, Xiumei Yang

Journal of Electrochemistry

Porous silicon with micrometer size pores, which is made on n⁺-Si by photoelectrochemically etched, has electroluminescent property. Each monochromic intensity and wavelength range of luminescent spectra depend on polarized potential. The intersity and the stability of cathodic electroluminescence is high than those of anodic one. Voltammetric behavior before quenching indicated that the electrochemical reactions of some surface species are involved in except the reduction of S₂O₈^2-, which leads to radiative recombination. The energy band diagram based on n⁺-Si(E_g=1.1 eV)/PS(E_g=1.8 eV) junction is proposed.

Effects Of Curvature On The Electrochemical Behaviors Of Tubular Electrode, Yirong Wu, Zhenghao Wang

Journal of Electrochemistry

The convective diffusion equation of tubular electrode was solved with the implicit finite difference numerical method. Comparing with the electrochemical behaviors of channel electrode, the behaviors of tubular electrode were analysised. The effects of curvature on the electrochemical behaviors of tubular electrode and the limit of applying Levich approximation to tubular electrode were discussed.

Mechanism And Texture Of Ni-Mo Alloy Electrodeposition, Ling Huang, Shukai Xu, Jaoning Tang, Fangzu Yang, Shaomin Zhou

Journal of Electrochemistry

Ni-Mo alloy deposits with (111) preferred orientation was obtained in a solution of 0.22 mol/L NiSO₄·6H₂O, 0.06 mol/L Na₂MoO₄·2H₂O and 0.3 mol/L Na₃C₆H₅O₇·2H₂O in temperature from 25℃ to 50℃, and current densities ranged from 10 mA·cm^-2 to 30 mA·cm^-2. The electrodeposition of Ni-Mo alloy was studied by cylic voltammetry and potential step experiment. It was shown that Ni-Mo alloy is formed by mechanism involving progressive nucleation followed by three dimensional growth of the metal centres. The complex …

Study On The Preparation, Properties And Applications Of The Polymer/Graphite Composite Electrode, Guohua Chen, Jinrui Xu

Journal of Electrochemistry

The graphite AS composite electrodes, which show high electric conductivity, high mechanical strength and operationl stability, were prepared by filling and extruding the AS copolymer with graphite powder. It exhibited a substantial hydrogen overvoltage and small residual current in different electrolytes, as compared with glassy carbon electrode. The electrode was applied to the determination of traces of Pb²⁺ in mineral water, Ag⁺ in waste water and In³⁺, Cu²⁺, Pb²⁺, Cd²⁺ in zinc ore, and showed high stability, reproducibility and selectivity. Owing to the existence of abundant polar functioal groups on the …

1997 - The Second Annual Symposium Of Student Scholars

Symposium of Student Scholars Program Books

The full program book from the Second Annual Symposium of Student Scholars, held on May 23rd, 1997. Includes abstracts from the presentations and posters.

Tractor Test Museum Commttee Minutes May 20th, 1997, Tractor Museum

Lester F. Larsen Tractor Museum: Planning and Development Documents

Officer Elections Foundation Funds State Fair Discussions

Settlements Due To Arid Collapsible Soils, Heather L. Devine

Dissertations and Theses

The arid alluvial deposits common to the western United States frequently undergo moderate to severe collapse when wetted that can threaten or destroy the stability of structures that are founded on such soils. Additionally, in some areas collapse has been known to occur due to overburden stresses alone. As development expands in these areas a method to estimate the degree of this collapse is essential.

Current settlement methods are reviewed and evaluated as they apply to collapsible soils, providing a basis for the development of a proposed settlement method for determining collapse. To aid in the determining the basis for …

Local Delivery Of Interleukin 4 By Retrovirus-Transduced T Lymphocytes Ameliorates Experimental Autoimmune Encephalomyelitis., Michael K. Shaw, James B. Lorens, Archana Dhawan, Richard Dalcanto, Harley Y. Tse, Alyssa B. Tran, Colleen Bonpane, Shanti L. Eswaran, Stefan Brocke, Nora Sarvetnick, Lawrence Steinman, Garry P. Nolan, C. Garrison Fathman

Journal Articles: Regenerative Medicine

Experimental autoimmune encephalomyelitis (EAE) is an inflammatory autoimmune disease of the central nervous system which serves as a model for the human disease multiple sclerosis. We demonstrate here that encephalitogenic T cells, transduced with a retroviral gene, construct to express interleukin 4, and can delay the onset and reduce the severity of EAE when adoptively transferred to myelin basic protein-immunized mice. Thus, T lymphocytes transduced with retroviral vectors can deliver "regulatory cytokines" in a site-specific manner and may represent a viable therapeutic strategy for the treatment of autoimmune disease.

Modeling And Simulation Of Manufacturing Systems Under Signal Kanban Policies, Lawrence E. Holloway

Electrical and Computer Engineering Presentations

A signal kanban system is used to order the production of various parts by processes with lengthy setup times, such as in metal stamping or injection molding. In this paper, we explore the behavior of signal kanban systems using simulations of systems producing two part types. Such simple models allows a visualization of the changes in the inventories of these parts under the signal kanban system. We consider the operation of the common fixed-batch signal kanban system, and a variation that we refer to as a fixed-fill policy. These policies are investigated under variations in demand, occasional disruptions in production, …