Engineering Commons^™

Kentucky Transportation Cabinet: Annual Assessment Of Customer Needs And Satisfaction: Mail Survey, Patsy Anderson, Kris Hockensmith

Kentucky Transportation Center Research Report

The Kentucky Transportation Cabinet, both through its own quality initiative and a statewide "Empower Kentucky" campaign, has a commitment to achieve new levels of quality in the development, construction and maintenance of highways. In order to gage progress, there is a need to establish a baseline of customer satisfaction with the current highway system, and determine needs as, perceived by the users of the highway system. As a result, the University of Kentucky Transportation Center, Technology Exchange Unit, was contracted to conduct a customer needs and satisfaction survey. The objectives of this study are to:

A. Ascertain Kentucky highway users' …

Modeling Of Surface Hairline-Crack Detection In Metals Under Coatings Using An Open-Ended Rectangular Waveguide, Christian J. Huber, Habibollah Abiri, Stoyan I. Ganchev, R. Zoughi

Electrical and Computer Engineering Faculty Research & Creative Works

A surface-breaking hairline crack or a narrow slot in a metallic specimen when scanned by an open-ended rectangular waveguide probe influences the reflection-coefficient properties of the incident dominant mode. Subsequent recording of a change in the standing-wave pattern while scanning such a surface results in what is known as the crack characteristic signal. Since microwave signals penetrate inside dielectric materials, this methodology is capable of detecting cracks under dielectric coatings of various electrical thicknesses as well. To electromagnetically model the interaction of an open-ended rectangular waveguide with a surface-breaking hairline crack under a dielectric coating, the dielectric-coating layer is modeled …

A Hybrid Fem/Mom Technique For Electromagnetic Scattering And Radiation From Dielectric Objects With Attached Wires, Mohammad Wares Ali, Todd H. Hubing, James L. Drewniak

Electrical and Computer Engineering Faculty Research & Creative Works

A hybrid formulation is presented, which combines the method of moments (MOM) with the edge-based vector finite element method (FEM) to solve electromagnetic radiation problems from structures consisting of an inhomogeneous dielectric body of arbitrary shape attached to one or more perfectly conducting bodies. While either method alone fails to model these structures efficiently, a combination of both finite element and moment methods provides an excellent way to solve these problems. The FEM is employed to handle the interior domain of inhomogeneous dielectric bodies and the method of moments is used to develop surface integrals that relate the field quantities …

Searches For Scalar Top And Scalar Bottom Quarks At Lep2, Barate, R.; Et Al., M. Thulasidas

Research Collection School Of Computing and Information Systems

Searches for scalar top and bottom quarks have been performed with data collected by the ALEPH detector at LEP. The data sample consists of 21.7 pb−1 taken at √ s = 161, 170, and 172 GeV and 5.7 pb−1 taken at √ s = 130 and 136 GeV. No evidence for scalar top quarks or scalar bottom quarks was found in the channels ˜t → cχ, ˜t → bℓν˜, and b˜ → bχ. For the channel ˜t → cχ a limit of 67 GeV/c 2 has been set on the scalar top quark mass, independent of the mixing angle between …

Analysis Of Safe Separation Distances From Natural Gas Transmission Pipelines, James Stephen Haklar

Dissertations

Accidental rupture of natural gas transmission pipelines with subsequent ignition of the escaping gas can result in the loss of life and property. In the United States, current means of protecting both the pipeline and the public include the establishment of class locations, in which specific pipeline design, construction and operation requirements must be attained. In addition, distances at which the pipelines can be safely set back from the community, called safe separation distances, have been developed in some European countries (e.g., Great Britain, the Netherlands) through use of risk assessment principles. However, to date there has been no simple, …

Automobile Air Bag Inflation System Based On Fast Combustion Reaction, Yacoob Tabani

Dissertations

Current automobile air bag inflator technology is complex, expensive and environmentally unsafe. A new and novel air bag inflator based on fast combustion reactions of methane-oxygen mixtures has been developed and studied. The thermodynamics and mass flow parameters of this new inflator have been modeled and found to be in agreement with experimental results.

The performance of the fast combustion inflator was evaluated in terms of pressure-time relationships inside the inflator and in a receiving tank simulating an air bag as well as the temperature-time relationship in the tank.

In order to develop this fast combustion inflator, several critical issues …

Electrocatalytic Control Of Exhaust Soot, Victor L. Callahan

Dissertations

The feasibility of combining electrostatic precipitation and use of a catalytic wall in a straight tube reactor as a means of destroying soot particles was investigated. Enhanced particle diffusion to the wall by an applied electric field provided the means of particle capture for subsequent catalytic oxidation at the active surface in a small length tube.

Soot particles flowing in a gas stream are influenced by the following transport mechanisms: convective flux as a result of bulk flow, diffusion flux as a result of particle concentration or number density gradient, and an electrostatic flux from the coulombic attraction as charged …

Process For Producing Biodiesel Fuel With Reduced Viscosity And A Cloud Point Below Thirty-Two (32) Degrees Fahrenheit , Hossein Noureddini

Papers in Biomaterials

Triglycerides are reacted in a liquid phase reaction with methanol and a homogeneous basic catalyst. The reaction yields a spatially separated two phase result with an upper located non-polar phase consisting principally of non-polar methyl esters and a lower located phase consisting principally of glycerol and residual methyl esters. The glycerol phase is passed through a strong cationic ion exchanger to remove anions, resulting in a neutral product which is flashed to remove methanol and which is reacted with isobutylene in the presence of a strong acid catalyst to produce glycerol ethers. The glycerol ethers are then added back to …

Development Of Aqueous Scrubber To Oxidize And Absorb Nitric Oxide, Wanna Lolertpiphop

Theses

The use of sodium chlorite (NaClO₂) and alkaline aqueous cumene hydroperoxide (CHP) as oxidizing agents to promote the absorption of nitric oxide from flue gases was investigated in a semicontinuous bubbling scrubber. The efficiency of the scrubbing solutions to remove nitric oxide was evaluated as a function of operating conditions such as pH, concentration of the oxidants, residence time, temperature, flue gas compositions.

Under acid conditions, sodium chlorite can stoichiometrically react and absorb 99.5% NO and 80% SO₂ in the same scrubber with 0,672 M NaClO₂ in buffered solution at pH 6, and 0.3 M NaOH. …

Microstrip Zero-Sum Antenna; Cad And Experimental Study, Tuan H. Lam

Theses

A microstrip antenna array consisting of two elements combined with a stripline hybrid (rat-race) ring coupler is used to implement a zero-sum antenna. Numerical optimization of individual antenna elements in terms of feed location and patch size was achieved using IE3D (Zeland Software Inc., Fremont, CA), a fullwave 3-D planar electromagnetic simulation software. Further, design of a hybrid (rat-race) ring coupler in a stripline environment was carried out, yielding the sum and difference functions as 0.5 dB and 40 dB, respectively. A combination of a two-element antenna array and a hybrid (rat-race) ring coupler as a zero sum antenna has …

Biodegradation Of Naphthalene Using Pseudomonas Putida (Atcc 17484) In Batch And Chemostat Reactors, Jay Boyd Best

Theses

Kinetic experiments were conducted using Pseudomonas putida (ATCC 17484) to determine the rate of growth when naphthalene was provided as a sole carbon source in suspended biomass systems. Batch and chemostat reactors were used under three sets of conditions: non-aerated, aerated at 29.5° C, and aerated at 25.5° C. A number of concentrations were tested under each set of conditions. Data regression was used to determine parameters for Monod (non-inhibitory), Andrews (inhibitory), and zero-order kinetics. Although the Andrews fit of the data provided a slightly lower sum-of-squares error (SSE), the amount of data scatter and the weak inhibition made the …

Mixed Metal Removal And Recovery By Hollow Fiber Membrane-Based Extractive Adsorber, Ramprakash Chilukuri

Theses

The feasibility and efficiency of simultaneous removal of multiple cations as well as anionic heavy metals from wastewater into a mixed extractant kept stagnant on the shell side of a 2-fiber-set hollow fiber membrane extractor operated as a fixed bed adsorber was explored. The novel extracting solvent was a mixture of an acidic or chelating extracting agent for one or more cations and a basic extracting agent, e.g., trioctylamine (TOA) for extracting anions; both were dissolved in the same diluent kerosene for simultaneous and synergistic extraction of cations and anions. In the stripping part of the fixed bed operation, alkaline …

Electrophysiologic Studies Of Hypothalamic Adenosine-5'-Triphosphate-Sensitive Potassium Channels, Dinora Hernandez

Theses

Of particular interest in this study were the electrical phenomena involving currents from the ATP sensitive K channel in isolated hypothalamic ventromedial nucleus (VMN) neurons. These neurons may play an important role in the glucose-sensing system of the body. Rat VMN neurons were isolated. For neuronal isolation, the proteolytic enzyme pronase was used. However, pronase was too harsh. The use of papain, another proteolytic enzyme, led to better neuronal morphology. The perforated patch clamp technique was used to gain access to the cell's interior. For membrane pore formation, nystatin was used; but seal formation was difficult. Amphotericin was used instead, …

Multi-Lifecycle Assessment Of Cathode Ray Tubes, Devendra Jayant Badwe

Theses

Over the past few years environmental issues and concerns have become more and more important, as they become a common part of most people's personal experience. In these regards, the electronics industry is facing substantial problems in terms of end-of-life management of its products, televisions and monitors in particular. The building blocks of this industry are usually viewed as relatively "clean". However, manufacturing by-products of the electronics industry and the disposition of electronics are becoming increasingly important technical, financial, and environmental issues.

Within the context of the above issues, environmentally responsible disposal of Cathode Ray Tubes (CRT's), which is still …

Synthesis And Characterization Of Phosphosilicate Glass Films By Lpcvd For Sensor Application, Hui Wu

Theses

This study was dedicated to the synthesis of the thin film materials required to fabricate the waveguide and the reference arm barrier for integrated optical sensor. Phosphosilicate glass (PSG) thin films were synthesized on silicon and quartz wafers by LPCVD using Ditertiarybutylsilane(DTBS), Trimethylphosphite(TMP) and oxygen as precursors. The films were processed at different temperatures between 600°C and 700°C at a constant pressure, and at different flow rate of TMP.

The effect of TMP flow rate and deposition temperature on deposition parameters and the properties of PSG films were investigated. The films deposited were uniform, amorphous, low stress and the composition …

Using Heart Variability To Measure The Effects Of Manual Medicine On Autonomic Activity, Michael Zullow

Theses

A pilot study was performed to test the theory that manual medicine techniques known as the CV4 (compression of fourth cerebral ventricle) maneuver and a sacral hold/iliac bridge hold combination increase parasympathetic activity. Manual medicine techniques are widely practiced by Doctors of Osteopathy and Chiropractors to treat physical and mental health problems. Those who have received manual therapy have reported to experience less pain, better mobility, and a greater feeling of relaxation. To help us learn about the effects of manual therapy, autonomic activity was measured scientifically rather than subjectively in this study by monitoring respiration rate and heart rate, …

A Decision Support System For The Equipment Selection Of Robotic Manufacturing Cells, Lars Johan Resare

Theses

Considering the principles of concurrent engineering, a Decision Support System (DSS) is developed to aid in the equipment selection of robotic manufacturing cells. The objective is to synchronously and simultaneously select proper equipment for the cell to provide efficient performance, subject to operational and budgetary constraints.

The DSS consists of several modules, including a data base that houses the specifications of equipment available in the market place, a first cut selection module, and an optimization engine. In its development, the optimization scheme utilizes analytical models and algorithms that capture different sources of variability in production, such as tolerances, clearances and …

Pervaporation-Assisted Esterification Of Salicylic Acid, Chaiya Chandavasu

Theses

The coupling of a pervaporation membrane unit with a reactor has been investigated as a means of improving the overall process efficiency. As model system, the esterification of salicylic acid with methanol in the presence of a homogeneous catalyst was studied in a unit consisting of a batch reactor externally coupled with a pervaporation module containing a composite poly(vinyl alcohol) membrane. The reaction was carried out at temperatures between 336 and 345 K. The catalyst was sulfuric acid at concentrations varying from 0.5 to 2.0 molar. Various initial molar ratios (Θ_B) of methanol and salicylic acid, ranging from …

Characteristics Of Recycled Plastics And Applications For Highway Appurtenances, Keith Macbain

Theses

Recycling is gaining widespread support in many communities as an environmentally acceptable solution to the management of solid waste. The success of these recycling programs depends largely on the development of high-value end use for the recycled products. This research involves an experimental and analytical study on the development of high-value, high-volume end uses for recycled plastic shapes. The experimental part includes material tests to determine mechanical properties of various recycled plastics. A constitutive model is proposed and verified that can be used in characterization of recycled plastics. Bending tests of recycled plastic beams were performed to assess strength, stiffness …

Mechanical Design Of An Experimental Parallel Robot, Philip Song

Theses

OSCAR, or Operational Space Controlled Adjustable Robot, is a parallel-actuated manipulator, also known as Stewart Platform or platform manipulator. The apparatus consists of two platforms (base and top) and six prismatic actuators in between. The main advantage of a platform manipulator is the fact that it can out-perform serial manipulators in both load capacity and precision. However, there are disadvantages and weaknesses such as limited mobility. A platform manipulator has reduced workspace compared to serial manipulators. The problem of limited workspace is solved by enabling OSCAR to change its prismatic leg positioning about the base platform.

During the course of …

Determination Of Effects Of Stress On Polymeric Ankle-Foot Due To Weight Change: Experimental Stress Analysis, Lin Yu Wang

Theses

Ankle-Foot Orthoses (AFOs) are devices that assist patients who sustained an abnormal motion at the ankle joint of the foot due to traumatic injury and stroke, etc. The objective of this project is to determine the stress patterns in AFOs under different loading conditions such as weights and genders. Thus, the location of failure can be predicted, and a redesign process can be developed. Furthermore, those experimental results will be used to verify the results obtained from the previous Finite Element Analysis (FEA) ^[11,10]. Results from the experiment showed a significant stress change due to load change. This stress …

Computational Determination Of Laminar Flow Loss Coefficients In 90° Channel Bend, Leonard Paul Parkin

Theses

Loss coefficients for laminar two dimensional incompressible channel (or duct) flow in a 90° bend are investigated using FEM software, FIDAP. This problem consists of a two dimensional duct with a 90° bend of constant radius flowing with water, at 70°F and atmositeno conditions. The bend radius to duct width ratios examined were 1.5 and 1.0. Both bend radius to duct width ratios were analyzed for Reynolds Number ranging from 50 to 1800. The pressure and velocity distributions were found and used to determine the pressure due to the bend. The results show the pressure loss effect due to the …

Soot Capture In An Electrocatalytic Reactor, Thana Slanvetpan

Theses

A major problem with many soot emission control devices is the fact that they quickly become loaded with soot which must be removed by a regeneration process. A soot capture reactor using a large flow channel was studied in order to eliminate channel plugging and avoid regeneration. Electrostatic precipitation was used in order to enhance particle diffusion to the catalyst wall of the reactor tube. The system effectiveness for soot capture was measured with filter paper sampling of the incoming versus the outgoing flow through the reactor. Soot filter loadings were analyzed by laser optical transmission. From the soot filter …

Modeling Of Deformed Swept Volumes With Sde And Its Applications To Nc Simulation And Verification, Feng Lu

Theses

Representation of swept volumes has important applications in NC simulation and verification as well as robot-motion planning. Most research on .the representation of swept volumes has been limited to rigid objects. In this study, a sweep deferential equation (SDE) approach is presented for the representation of deformed swept volumes generated by flexible objects.

The deformed swept volume analysis is integrated with machining physics to account for tool deformation/deflection for the NC simulation. End milling is modeled and analyzed and the tool deformations are calculated and integrated with the SDE program. A program is developed in C++ for the generation of …

Motion-Compensating Long-Term Memory Prediction, Thomas Wiegand, Xiaozheng Zhang, Bernd Girod

Electrical Engineering

Motion-compensating long-term memory prediction extends the spatial displacement utilized in block-based hybrid video coding by a variable time delay permitting the use of more frames than the previously decoded one for motion compensation. The long-term memory covers the decoded frames of some seconds at encoder and decoder. We investigate the influence of memory size in our motion compensation scheme and analyze the trade-off between the bit-rates spent for motion compensated prediction and residual coding. Simulation results are obtained by integrating long-term memory prediction into an H.263 codec. PSNR improvements up to 2 dB for the Foreman sequence and 1.5 dB …

A Political Psychological Primer Of Virtual Reality Sequelae For Mental Health Professionals, Ibpp Editor

International Bulletin of Political Psychology

This paper describes a number of sequelae stemming from virtual reality (VR) and VR technology (VRT) based on theoretical and empirical research in the behavioral sciences, social sciences, humanities.

Ua3/9/2 Information Technology Summary Report, Wku Information Technology

WKU Administration Documents

Report of the WKU Information Technology Division to the president regarding operations from 1991 through 1997.

Method And Apparatus For Transferring A Person, Donald J. Smith Jr., Patrick J. Atkinson, Melissa L. Evans, Shawn P. Londo, William J. Ryan

Mechanical Engineering Patents

A method and vehicle preferably a wheelchair (10) for transporting and transferring an invalid person is described. The wheelchair has first and second frames (12 and 48) with drive wheels (18) between which is provided a chair (82) or support (83). The first frame has top and bottom sliding mechanisms (34 and 36) which are mounted by I-beam extensions (38 and 40) to the bars (24 and 26) of the first frame. The second frame has top and bottom rails (54 and 56) which are slidably connected to the sliding mechanisms of the first frame. The rails have slots (78) …

Increased Radiative Lifetime Of Rare Earth-Doped Zinc Oxyhalide Tellurite Glasses, David L. Sidebottom, Michael A. Hruschka, B. G. Potter, Richard K. Brow

Materials Science and Engineering Faculty Research & Creative Works

We have investigated the structural and optical properties of rare earth-doped zinc tellurite glasses modified by the substitution of ZnF₂. Raman and phonon sideband spectroscopies were employed to characterize changes in the glass structure as well as to probe vibrational behavior in the immediate vicinity of the rare earth ion. These measurements are combined with photoluminescence and optical absorption to monitor the effect of halide substitution upon the optical behavior of the rare earth dopant. A substantial increase in the intrinsic radiative lifetime of Nd³⁺ is observed with increasing halide concentration.

Acuta Enews October 1997, Vol. 26, No. 10

ACUTA Newsletters

In This Issue

Marketing Ethernet at Mizzou

Board Report

President's Message

Maximizing Call Center Potential

Welcome New Members

ACUTA Committees at Work

Spotlight

Mizzou

Marketing Committee Needs You!

Lisa Cheshire, CMP

Semer Chairs ASAE Technology Section

DC at a Glance

ACUTA Event Calendar

"Telco Network Whale"