Engineering Commons^™

Determination Of Aircraft Orientation For A Vision-Based System Using Artificial Neural Networks, Sanjeev Agarwal, Subhasis Chaudhuri

Electrical and Computer Engineering Faculty Research & Creative Works

An algorithm for real-time estimation of 3-D orientation of an aircraft, given its monocular, binary image from an arbitrary viewing direction is presented. This being an inverse problem, we attempt to provide an approximate but a fast solution using the artificial neural network technique. A set of spatial moments (scale, translation, and planar rotation invariant) is used as features to characterize different views of the aircraft, which corresponds to the feature space representation of the aircraft. A new neural network topology is suggested in order to solve the resulting functional approximation problem for the input (feature vector)-output (viewing direction) relationship. …

On-Line Team Project Communication Tool Set, Halvard E. Nystrom, D. R. Risco

Engineering Management and Systems Engineering Faculty Research & Creative Works

Team projects offer a valuable mechanism for effective learning. However, communication within the team, with the instructor and between different teams is a challenging task that can greatly limit the effectiveness of the learning experience. Some of the tools and concepts that are being developed for distance learning applications can be used to enhance team project communication within teams that are geographically separated as well as for in-campus teams. This article documents a set of on-line tools that allow for asynchronous team participation and timely monitoring and feedback by the instructor.

A Hybrid System For Well Test Analysis, Edward A. May, Cihan H. Dagli

Engineering Management and Systems Engineering Faculty Research & Creative Works

Petroleum well test analysis is a tool for estimating the average properties of the reservoir rock. It is a classic example of an inverse problem. Visual examination of the pressure response of the reservoir to an induced flow rate change at a well allows the experienced analyst to determine the most appropriate model from a library of generalized analytical solutions. Rock properties are determined by finding the model parameters that best fit the observed data. This paper describes a framework for hybrid network to assist the analyst in selecting the appropriate model and determining the solution. The hybrid network design …

A Transmission-Constrained Unit Commitment Method, Chung-Li Tseng, Chao-An Li, S. S. Oren, C. S. Cheng, A. J. Svoboda, R. B. Johnson

Engineering Management and Systems Engineering Faculty Research & Creative Works

The paper presents a transmission-constrained unit commitment method using a Lagrangian relaxation approach. The transmission constraints are modeled as linear constraints based on a DC power flow model. The transmission constraints, as well as the demand and spinning reserve constraints, are relaxed by attaching Lagrange multipliers. The authors take a new approach in the algorithmic scheme. A three-phase algorithm is devised including dual optimization, a feasibility phase and unit decommitment. A test problem involving more than 2500 transmission lines and 2200 buses is tested along with other test problems

An Object-Based Evolutionary Algorithm: The Nesting Solution, Kanchitpol Ratanapan, Cihan H. Dagli

Engineering Management and Systems Engineering Faculty Research & Creative Works

The nesting problems have received considerable attention and have been addressed by a variety of algorithms. Recently, evolutionary algorithms have been adopted for solutions. Most of these algorithms, however, require a search in one-dimensional space; thus a transformation of the problem to a single dimension, as in the sequencing problems, is needed. Unfortunately, this restricts the search space. In this study an object-based evolutionary algorithm for the nesting problems is proposed. The methodology is created in a true two-dimensional space, allowing object-based mechanisms and object-based evolutionary operators to perform effectively on the space without restricting search alternatives. Implementation of the …

A Robust Unit Commitment Algorithm For Hydro-Thermal Optimization, Chao-An Li, R. B. Johnson, A. J. Svoboda, Chung-Li Tseng, E. Hsu

Engineering Management and Systems Engineering Faculty Research & Creative Works

This paper presents a unit commitment algorithm which combines the Lagrangian relaxation (LR), sequential unit commitment (SUC), and optimal unit decommitment (UD) methods to solve a general hydro-thermal optimization (HTO) problem. We argue that this approach retains the advantages of the LR method while addressing the method''s observed weaknesses to improve overall algorithm performance and quality of solution. The proposed approach has been implemented in a version of PG&E''s HTO program, and test results are presented.

Total Quality Management And Corporate Financial Performance: An Analysis Of The Malcolm Baldridge National Quality Award Criteria, Alice Brigid Beechner

Doctoral Dissertations

"The impact of the Malcolm Baldrige National Quality Award (MBNQA) Performance Excellence Criteria on corporate financial performance is examined. Three independent studies were performed to assess this relationship. The first included Malcolm Baldrige National Quality Award (MBNQA) winners. The second study involved 69 firms identified as Total Quality Management (TQM) firms and for the final study a sample of large American corporations who completed surveys which provided an estimate of the score the companies would have received on a MBNQA assessment were examined. The method for assessing the financial strength for all three studies was the metric Market Value Added …

Voice Recognition Using Neural Networks, Ganesh K. Venayagamoorthy, Viresh Moonasar, K. Sandrasegaran

Electrical and Computer Engineering Faculty Research & Creative Works

One solution to the crime and illegal immigration problem in South Africa may be the use of biometric techniques and technology. Biometrics are methods for recognizing a user based on unique physiological and/or behavioural characteristics of the user. This paper presents the results of ongoing work into using neural networks for voice recognition

Emc Applications Of The Emap5 Hybrid Fem/Mom Code, Yun Ji, Todd H. Hubing, Mohammad Wares Ali

Electrical and Computer Engineering Faculty Research & Creative Works

EMAP5 is a numerical software package designed to model electromagnetic problems. It employs the finite element method (FEM) to analyze three-dimensional volumes, and the method of moments (MOM) to analyze the current distribution on the surface of these volumes. The two methods are coupled through the fields on the dielectric surface. This paper describes the formulation of the EMAP5 code and demonstrates how it can be used to analyze simple printed circuit board configurations

Simulation Studies With A Continuously Online Trained Artificial Neural Network Controller For A Micro-Turbogenerator, Ganesh K. Venayagamoorthy, Ronald G. Harley

Electrical and Computer Engineering Faculty Research & Creative Works

This paper reports on the simulation studies carried out using MATLAB/SIMULINK and the practical implementation of a continuously online trained (COT) artificial neural network (ANN) controller to identify the continuous changing complex nonlinear dynamics of the power system, and another COT ANN to control a micro-turbogenerator which consists of a turbine simulator and a micro-alternator connected to an infinite bus through a short transmission line in a laboratory environment. This neural network controller augments/replaces the traditional automatic voltage regulator (AVR) and the turbine governor of the generator. Simulation and practical results are presented to show that this COT ANN identifier/controller …

An Approach To Exact Modeling Of The Pwm Switch, Anas N. Al-Rabadi

Dissertations and Theses

Large number of small-signal models of de-to-de power converters exists already. These models usually use two techniques. The first is the averaging technique, such as: volt-second and current-second balance, state space averaging, and the averaged modeling approach. The other technique focuses on the exact modeling approach, such as: the application of time varying systems theory to linearize networks. One of the methodologies to apply the above techniques, is to view the three-terminal systems as a two-port network.

The aim of the work presented in this thesis is to develop a new approach, by the application of the two-port network methodology …

Chromium Oxides And Lithiated Chromium Oxides. Promising Cathode Materials For Secondary Lithium Batteries, Pankaj Arora, Dong Zhang, Branko N. Popov, Ralph E. White

Faculty Publications

Chromium oxides and lithiated chromium oxides were synthesized by thermal decomposition of chromium trioxide (CrO₃) at high temperatures and oxygen pressures. Synthesis temperature and pressure markedly affect the performance of these cathode materials. Higher pressures lead to a higher O/Cr ratio and fewer impurities in the final product. These materials are stable intercalation hosts for lithium, and exhibit a higher capacity than any of the prominent positive electrodes used in secondary lithium batteries. m-CrO_x has a capacity of 255 mAh/g, while m-LiCrO_x has a capacity of 210 mAh/g, during the first discharge. The average …

Placement Of Piezoelectric Actuators For Active Control Of Vibration Using Modal Parameters, Xuegeng Zhu

Mechanical & Aerospace Engineering Theses & Dissertations

An equation is derived to model the piezoelectric actuators incorporation with flexible structures. This equation permits the comparison of the performance indices over the entire structure for a piezoelectric actuator with constant area, which is unachievable if the Finite Element Method is used for complicated structures.

An index has been developed for placement of piezoelectric actuator for control of vibration of a flexible structure. This index is derived from the definition of H2norm. Computation of the proposed index requires only the natural frequencies and corresponding mode shapes of the structures of interest. The method is well suited to large …

Thermodynamic Modeling And Analysis Of Human Stress Responses, Satish C. Boregowda

Mechanical & Aerospace Engineering Theses & Dissertations

A novel approach based on the second law of thermodynamics is developed to investigate the psychophysiology and quantify human stress level. Two types of stresses (thermal and mental) are examined. A Unified Stress Response Theory (USRT) is developed under the new proposed field of study called Engineering Psychophysiology. The USRT is used to investigate both thermal and mental stresses from a holistic (human body as a whole) and thermodynamic viewpoint. The original concepts and definitions are established as postulates which form the basis for thermodynamic approach to quantify human stress level. An Objective Thermal Stress Index (OTSI) is developed by …

Surface Morphology Of Laser-Superheated Pb(111) And Pb(100), Z. H. Zhang, Bo Lin, X. L. Zeng, H. E. Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

The surface step density on the vicinal Pb(111) and the surface vacancy density on Pb(100) after laser superheating and melting are investigated using reflection high-energy electron diffraction. With ∼100-ps laser pulses, Pb(111) surface superheating does not significantly change the density of the steps and step-edge roughness. However, after laser surface melting, the average terrace width and the string length at the step edge become as large as those at room temperature. The average terrace width at 573 K changes from 38±15 to 64±19 Å after laser surface melting, while the average string length at the step edge changes from 90±14 …

The Cost Effective Quality Maintenance Of Ship Containers : Management And Technical Practices Which Reflect High Standards Of Containers In The Ceylon Shipping Corporation, H.M. Ajith Dehipola

World Maritime University Dissertations

This dissertation seems to highlight the need of have a quality repair standards to develop, implement and oversee the container repairs in the Ceylon shipping corporation. The mechanism and process through which this can be achieved is examined and explained by the author in a manner which can be understood by the readers in the late chapters. It is also emphasised, in this work that the need exist for properly and highly trained personal to fulfil the required standards in container repairs. It is fairly clear that, the life of a container is depend from many factors. Some of the …

Proposal For Improving Maritime Safety In Jordan With Emphasis On The Engineer's Role, Moain Al-Zoubi

World Maritime University Dissertations

This dissertation is a study for improving maritime safety in Jordan with a focus on the marine engineers role. The topic evaluates the current situation of maritime authority structure and safety procedures in all maritime activities. The objective of this proposal is to set out general guidance to improve the planning, management and operational procedures of safety matters in all maritime fields in Jordan. The topic discusses four important areas deemed necessary to improve maritime safety in Jordan, with emphasis on the role of the marine engineer in each area. The first is administrative and management, the second is legal …

The Potential Impact Of Marpol Annex Vi On The Design And Operation Of Oil Tankers, Pratomo Setyohadi

World Maritime University Dissertations

No abstract provided.

The Development Of Training And Practice Of Navigation For Advanced Ships : Application To Merchant Marine Training Centre Programmes In Thailand, Thiti Tingmai

World Maritime University Dissertations

This dissertation is a study of an advanced ship, focusing on the training needs for a navigation officer by taking into consideration technological advances, operational factors and human factors. A short overview is given of current and future trends, and developments in modem technology in shipping including an advanced bridge in the form of an integrated bridge system. The role of the navigator, bridge operational procedures and conditions, and training needs are examined, taking into account manning and technological change that have taken place. The required knowledge, skills and attitude for an operator of advanced ships are identified. The importance …

Satellite Technology : Reinforcement Of Computer Data Transmission Technology : Implications For The Maritime World Communications, Data Transfer And Maritime Education, U Kyaw Htut

World Maritime University Dissertations

This dissertation is a study of the impact of data transmission via satellite on the maritime world of communication, data transfer and education. The aim of the study is to understand the technological reinforcement of the maritime industry and the changes taking place in it. With the avalanche of changes that are taking place in the field of information technology, they can be used to facilitate the shipping industry. This dissertation assists in understanding some of the technological evolution of satellite technology and data communication and in the needs of the maritime industry as well. This dissertation describes satellite technology …

Outrigger Design And The Stability Of Outrigger Boats, Benedicto Mercado Selirio

World Maritime University Dissertations

Philippine outrigger boats are small wooden boats that have the distinct characteristics of a very slender hull and bamboo outriggers at each side. The study focuses on the outrigger design and their effect on boat stability. The main idea is to see if there is any design flaw to make the boat susceptible to capsizing. The paper briefly looks into the social and economic significance of outrigger boats in the Philippines and their various uses. It examines recent boat accidents involving boats that capsized and their probable cause. A review of basic outrigger boat parts introduces readers to the boat …

Fire Safety In Connection With The Transport And Handling Of Dangerous Cargoes In Port Areas, Adama Sy

World Maritime University Dissertations

No abstract provided.

Implant Having Reduced Generation Of Wear Particulates, David A. Pienkowski

Biomedical Engineering Faculty Patents

A method is provided for reducing the amount of wear particulates generated by a total joint orthopaedic implant. The implant consists of two matched articulating components. The method includes the steps of placing the total joint orthopaedic implant in a fluid bath and articulating the implant in the fluid bath for at least 1,000 cycles. The articulation may be performed in three stages. In the first, the implant is articulated under a load of substantially 0.1-500 Newtons with sliding speeds of substantially 0.01-0.5 meters per second. During a second stage the articulation takes place under a load of substantially 200-2,500 …

Method And Apparatus For Flotation Separation, Xiang-Huai Wang

Center for Applied Energy Research Faculty Patents

A flotation method and apparatus for separating a selected constituent from an effluent of an industrial process is provided. The apparatus includes a conditioning tank and a flotation cell. The conditioning tank allows mixing a flotation reagent with an effluent and includes a mechanism for also dissolving gas in the effluent within the conditioning tank. The flotation cell includes a dissolved gas flotation chamber having an overflow for recovering the selected constituent and a tailings drain. In addition, the flotation cell also includes an added gas flotation chamber having a sparger for injecting gas into the effluent, an overflow for …

On The Strain-Rate Sensitivity Of Columnar Ice, M. E. Manley, E. M. Schulson

Dartmouth Scholarship

A power law relation between stress and strain rate of the form σ ∝ ε̇1/n was used to describe the response to strain rate of S1 ice loaded across the columns at -10°C. The rate exponent, n, decreased with increasing strain from about 4.6 at an observed peak on the load displacement curve to approximately 2.6 at a shortening of 2%. Analysis of these results and of the results of other authors on different forms of ice deformed at the same temperature suggests that the power law exponent, n, is proportional to Fc/Fg. The parameter Fc/Fg is the far-field basal …

Composition Containing A Polymer And Conductive Filler And Use Thereof, Ravi F. Saraf

Department of Chemical and Biomolecular Engineering: Patents

A composition containing a polymeric matrix and a conductive filler component is provided. The conductive filler component comprises conductive particles and a polymer selected from the group consisting of substituted and unsubstituted polyanilines, substituted and unsubstituted polyparaphenylenevinylenes, substituted and unsubstituted polythiophenes, substituted and unsubstituted polyazines, substituted and unsubstituted polyparaphenylenes, substituted and unsubstituted polyfuranes, substituted and unsubstituted polypyrroles, substituted and unsubstituted polyselenophene, substituted and unsubstituted poly-p-phenylene sulfides and substiututed and unsubstituted polyacetylenes, and mixtures thereof, and copolymers thereof. Compositions of the present invention are useful as corrosion protecting layers for metal substrates, for electrostatic discharge protection, electromagnetic interference shielding, and as …

Statistical Continuum Theory For Inelastic Behavior Of A Two-Phase Medium, Brent L. Adams, H. Garmestani, S. Lin

Faculty Publications

This work was supported in part (B.L. Adams) by the MRSEC Program of the National Science Foundation under Award no. DMR-9632556. Further support was provided by the Center for Materials Research and Technology (MARTECH at FSU) and Center for Nonlinear and Nonequilibrium Sciences (CENNAS at FAMU). A statistical contiuum mechanics formulation is presented to predict the inelastic behavior of a medium consisting of two isotropic phases. The phase distribution and morphology are represented by a two-point probability function. The isotropic behavior of the single phase medium is represented by a power law relationship between the strain rate and the resolved …

A Portable Photovoltaic Water Aeration System, Florida Solar Energy Center, William Young

FSEC Energy Research Center®

Water aeration is a method to improve the water quality in a lake by adding oxygen to the water. Because water aeration systems are often located in remote locations, photovoltaics are ideal for powering these systems. This paper describes a water aeration system powered by photovoltaics that is used in Florida. The portable nature of this system permits the owner to conveniently relocate the system and aerate bodies of water as needed.

1998 Reduced Gravity Student Flight Opportunity: Thin Film Extrusion In Microgravity, Jason Duckworth

Honors Capstone Projects and Theses

No abstract provided.

Markovian Decision Control For Traffic Signal Systems, Xiao-Hua Yu, Allen R. Stubberud

Electrical Engineering

Setting signals at intersections to minimize the queue length and vehicle delay time is a key goal in traffic management. In this paper, a new control strategy for a signalized traffic intersection is developed by applying Markovian decision control theory. Statistical analysis of simulation results with different arrival rates indicate the excellent potential of this approach.