Engineering Commons^™

Bp-Kan-Based Inversion Imaging For Borehole Resistivity Method And Its Application, Xu Zhongzhong, Yin Longlong, Cheng Jiulong, Xu Jinpeng, Lu Cunjin, Zhao Hongpeng

Coal Geology & Exploration

Objective In the monitoring of coal seam mining-induced deformation and failure of surrounding rocks, the borehole resistivity method stands out due to its capacity for dynamic, three-dimensional (3D) full-space measurements. However, conventional resistivity inversion for the method is generally carried out using the least squares algorithm, leading to limited accuracy in practical engineering. In recent years, neural network-based inversion has demonstrated the potential for addressing this challenge, while its performance is yet to be further improved. Methods In this context, inversion imaging based on a back propagation-Kolmogorov-Arnold network (BP-KAN) was proposed for the borehole resistivity method, aiming to accurately monitor …

Design Of An Intelligent Failure Diagnosis And Early Warning System For Tunnel Drilling Rigs In Coal Mines, Song Haitao, Zhang Naiwen, Han Jian, Wu Min

Coal Geology & Exploration

Objective In coal mines, harsh environments and complex geological conditions underground lead to frequent failures of tunnel drilling rigs. However, conventional techniques for failure diagnosis and early warning suffer from limitations in diagnostic accuracy, real-time performance, and interpretability. Therefore, these techniques are insufficient for both the rapid identification of the anomalous status of tunnel drilling rigs and the early warning of their potential failures. Methods Considering the complex underground environments in coal mines, this study developed an intelligent failure diagnosis and early warning system for tunnel drilling rigs in coal mines, placing a particular emphasis on key technologies for failure …

A Method For Optimizing The Digital Twin Model Of The Mechanical-Electro-Hydraulic System Of Cantilever Tunnel Boring Machines, Wang Yan, Jia Zeyu, Zhao Yihui, Wei Shirui, Zhang Xuhui, Zhao Youjun, Han Xiao

Coal Geology & Exploration

Objective Cantilever roadheaders represent roadway tunnelling equipment that integrates the deep coupling of mechanical, electrical, and hydraulic systems, and their control accuracy directly determines the forming quality of roadways.Methods Cantilever roadheaders involve nonlinear mechanical motion, hydraulic control, and cutting load, rendering it challenging to establish accurate control models. Using the philosophy of digital twin modeling, this study developed a method for optimizing the digital twin model of the mechanical-electro-hydraulic system of cantilever roadheaders based on virtual-physical consistency evaluation. Specifically, a digital twin model of the mechanical-electro-hydraulic system was developed using multi-domain co-simulation between AMESim and Simulink. This model allows …

Application Of Palmprint Data For Prediction Of Diabetes, Ramasamy K Mr

Theses and Dissertations

Type 2 diabetes is one among the diabetes mellitus which has strong relation with lifestyle, genetics and metabolic dysfunction. The increasing global prevalence, rising healthcare costs, and high percentage of undiagnosed individuals leads to the need of noninvasive, cost-effective early detection methods. In conventional diagnostic methods, laboratory investigations and periodic clinical visits are needed, which may not be feasible for working and middle-aged populations. To overcome this, the research work proposes an automatic, non-invasive and early prediction of Type 2 diabetes using palmprint image analysis integrated with clinical data for identifying diabetic and non-diabetic individuals. The first proposed method aims …

Whole-Life Carbon–Cost–Circularity Optimization For Ai-Era Data Centers: A Robust Multi-Objective Framework Under Carbon Pricing Uncertainty, Arezou Shafaghat, Da Hu, Ali Keyvanfar

Faculty Articles

The explosive growth of artificial intelligence workloads has triggered unprecedented data center construction, yet environmental assessment remains focused on operational energy efficiency. This paper introduces DC-WLC3O, a framework that simultaneously optimizes three objectives across the full data center lifecycle: whole-life cost, whole-life carbon, and material circularity index. The framework integrates cradle-to-cradle lifecycle assessment with dynamic material flow analysis, employing a four-layer analytical stack: Monte Carlo simulation with Latin Hypercube Sampling and Iman–Conover rank correlation; NSGA-III tri-objective Pareto optimization; Sobol’ variance-based global sensitivity analysis; and Many-Objective Robust Decision Making (MORDM). The framework evaluates 192 design configurations for a 30 MW hyperscale …

Prepration And Characterization Of Alginate Biocomposite Films From Natural Seaweed Containing Glycerol And Silica, Bahareh Ebrahimi Mojaveri

Master's Theses

This study focuses on the development of sodium alginate, a seaweed-derived biopolymer, as a sustainable alternative to conventional food packaging films. The alginate is extracted from natural brown seaweed with a yield of 31% and is formed into alginate films by the solution casting method. This study discusses the alginate extraction and film formation techniques as well as the conditions that affect film properties. Additionally, it explores using composite formulations to enhance alginate properties through additives such as glycerol and silica. Glycerol, tested at different concentrations (15, 25, and 50 wt.%), works as a plasticizer to enhance the flexibility of …

Object Avoidance Onboard An Autonomous Underwater Vehicle In Support Of Geomagnetic Based Navigation System, Eric Benavidez

Electronic Theses and Dissertations 2020 - Present

The objective of this thesis was to collect and analyze magnetic field data in the vicinity of the Mercy, Tracey, and Jay Scutti with an autonomous underwater vehicle (AUV) and a forward mounted magnetometer. The collected data was used to develop geomagnetic contour maps and magnetic thresholds of known anomalies to compare the results with validated sources such as NOAA.

In addition, this collected data was used to develop a Gazebo simulation which accurately modeled the magnetic field data and ocean effects of the Fort Lauderdale Shipwreck Trail. This Gazebo simulation allowed for proper testing and refinement of object avoidance …

Evaluating The Suitability Of Commercial Off-The-Shelf Software Radio Peripheral Front-Ends For High-Fidelity Satnav Monitoring Applications, Mark J. Carroll, Sanjeev Gunawardena, Timothy I. Machin, Christine M. Schubert Kabban, Joseph J. Rushanan

Faculty Publications

Signal quality monitoring is an essential portion of the Global Positioning System (GPS) enterprise. Through monitoring, accuracy and normality are achieved for each satellite and signal. GPS users rely on this information from monitoring stations to ensure safe and successful operation. Traditional monitoring has been performed with hardware receivers or custom radio frequency front-ends. These receivers have known and measured impacts on the distortions of the received signal. This research aims to elucidate and quantify the amount of distortion introduced by the front-ends of general-purpose commercial off-the-shelf software-defined radio (SDR) peripherals. Monitoring stations outfitted with SDRs are more flexible and …

Evaluation Of Microwave Treatment Of Pfos-Laden Granular Activated Carbon, Rachel Melo Fonseca

Electronic Theses and Dissertations 2020 - Present

This study investigated the microwave treatment as a potential regeneration approach for PFOS-laden granular activated carbon (GAC). PFOS was used as a model legacy PFAS, and calcium was selected to examine how inorganic constituents may influence PFAS loading and fluorine behavior during treatment. Microwave temperature profiling showed that GAC temperatures increased with treatment time and power level, reaching approximately 400-950°C. Selected microwave conditions reduced PFOS-derived extractable organic fluorine (EOF), with apparent EOF reduction increasing from 65.5% after 1 min to 96.8% after 4 min. Calcium increased PFOS-derived EOF loading before microwave treatment but did not show a consistent effect on …

Sustainable Consumer Behavior Modeling: A Complex-Systems Approach To Neuromarketing, Preethi Nanjundan, Nupoor Sanjay Bhute, Ragini Topre, Lijo Thomas

Northeast Journal of Complex Systems (NEJCS)

This study examines the application of complex-systems modeling to neuromarketing data for gaining deeper insights into the mechanisms underlying sustainable consumer behavior. It investigates how neural and biometric responses, interpreted through a systems-based perspective, can uncover dynamic interactions, feedback mechanisms, and emergent behavioral patterns influencing sustainable purchase decisions. The research explores the impact of sustainability-oriented marketing stimuli on long-term behavioral intentions by emphasizing the interconnected roles of cognitive processing, emotional engagement, implicit associations, and collective consumer dynamics. Through simulation-based modeling and structural analysis, the study demonstrates how subconscious neural responses and affective mechanisms mediate the relationship between marketing interventions, consumer …

Chemical Composition Stability Of Cu–Sn And Cu–Zn Journal Bechemical Composition Stability Of Cu–Sn And Cu–Zn Alloys Fabricated By Sand And Permanent Mold Casting With Nickel Alloying, Erwin Erwin, Didik Sugiyanto, Juan Pratama, Trisna Ardi Wiradinata, Abdul Rachmadhan, Muhammad Fikri Andika

Journal of Mechanical Engineering Science and Technology (JMEST)

The processes of moulding and reinforcing chemical elements have a big impact on the balance of chemical composition in copper-based bearing alloys. This has a direct impact on how well the material works. This study examines Cu–Sn alloys produced via sand casting and Cu–Zn alloys fabricated through permanent mould casting, with the incorporation of nickel, which remains uncommon. The objective was to examine the variations in the equilibrium of the chemical composition and the performance potential of the bearing alloy metal when subjected to different casting techniques and nickel concentrations ranging from 0% to 4%. Some of the methods used …

Effect Of Concentration And Temperature Of Tio2-Al2o3 Hybrid Nanofluid On The Corrosion Rate Of Aluminum Radiator, Ratna Monasari, Rizky Maulana Ramadhan, Nike Nur Farida, Ahmad Hanif Firdaus, Supa Kusuma Aji, Yuniarto Agus Winoko, Rizkyansyah Alif Hidayatullah

Journal of Mechanical Engineering Science and Technology (JMEST)

Corrosion of aluminum radiators can reduce cooling system reliability and shorten service life in automotive applications. This study examines the effect of TiO₂-Al₂O₃ hybrid nanofluid concentration and temperature on the corrosion rate of commercially available aluminum radiator material. Hybrid nanoparticles with a TiO₂-Al₂O₃ mass ratio of 50:50 were dispersed in distilled water at concentrations of 0.6 wt.%, 0.8 wt.%, and 1.0 wt.%. Corrosion behavior was evaluated using a 14-day accelerated immersion test at 60°C and 80°C, and the corrosion rate was determined using the gravimetric mass loss method. The results …

Vertical Alignment As A Systemic Strategy For Sustaining Workforce-Aligned K–12 Engineering Initiatives: A Collective Case Study Of District-Wide Microelectronics Integration, Greg J. Strimel, Victoria Constantine, Deana Lucas, Emily Haluschak, Yubin Lee, Morgan Hynes, Selcen Guzey, Tamara J. Moore

School of Engineering Technology Faculty Publications

Background

In response to the 2022 CHIPS and Science Act, a K–12 workforce development initiative was launched to embed microelectronics education across US school districts. To promote sustainability, the initiative employed a district-wide vertical alignment strategy that progressively integrates microelectronics content and engineering-related career experiences from kindergarten through high school. While vertical alignment is often used for curriculum planning, its broader potential as a systems-level strategy remains underexplored.

Purpose

This study investigated how vertical alignment functions within a K–12 engineering workforce development initiative, focusing on enablers/barriers toward expanding and sustaining integration efforts. The research questions addressed stakeholder experiences with the …

Radiation Effects On The Amd Versal Running An Automatic Modulation Classification Model, Allan D. Howe

Theses and Dissertations

With the recent increase of interest into artificial intelligence (AI), graphics processing units (GPUs) have been used as the main hardware architecture for AI computation. Because of their high power consumption and large size, it is necessary to consider other architectures to perform AI computing in outer-space where size, weight, power, and cost (SWaP-C) are tightly constrained. One such architecture is the Advanced Micro Devices (AMD) Versal Adaptive Compute Acceleration Platform (ACAP), which can achieve acceptable AI throughput at a lower power and size compared to a GPU. As the Versal ACAP gets used in space applications, it is necessary …

Comparative Analysis Of Strain-To-Velocity Conversion Methods For Active-Source Das Data And Collocated Nodal Stations, Prajwal Panthi, Brady R. Cox

Civil and Environmental Engineering Student Research

Distributed Acoustic Sensing (DAS) provides dense spatial measurements of the dynamic strain along fiber optic cables, offering high-resolution wave sensing for ground motion monitoring and subsurface imaging applications. However, DAS records the axial strain or strain rate, whereas traditional seismic and engineering ground motion equipment and derived metrics are based on particle displacement, velocity, or acceleration, necessitating reliable strain-to-velocity conversion methods. This study evaluates three widely used conversion approaches: the fk-rescaling, curvelet-based conversion, and slant-stack methods. These approaches are applied to a unique high-energy, near-field, active-source dataset collected at the Birds Landing Site in Sherman Island, California. The dataset includes …

Nutrient Enrichment Of Palm Oil Mill Effluent Digestate (Pomed) With Fish Amino Acid And Boiler Ash For Biofertilizer Production, Aryati Putri Maharani, Ziyaulhaq Umar, Shahrul Ismail, Zulkarnaini Zulkarnaini

Journal of Environmental Science and Sustainable Development

Palm oil mill effluent digestate (POMED) has potential as a biofertilizer. However, its application is limited by unbalanced macronutrient composition, particularly low nitrogen (N), phosphorus (P), and potassium (K). This study investigated a laboratory-scale nutrient enrichment strategy for POMED using fish amino acid (FAA) as an organic nitrogen source and boiler ash (BA) as a potassium source. Nitrogen content was determined using a CHNS– O analyzer, while phosphorus and potassium were analyzed using inductively coupled plasma (ICP). Fertilizer quality was evaluated based on the standards and industrial research institute of Malaysia (SIRIM) and Indonesian national standard (SNI 2803:2010). FAA and …

Developing A Natural Language Interface For Knowledge Graphs, Ruth Assefa, Sarah Mendoza, Luke Voinov, Oyku Serap Ogut, Nurcan Yuruk

SMU Journal of Undergraduate Research

This paper proposes to solve the challenge of making databases more user-friendly by interfacing them with OpenAI's ChatGPT-3.5 model. We implemented this solution to assist researchers in easily finding others with similar research interests. Our study involves 184 researchers from 14 departments at Southern Methodist University (SMU). We collected researchers' areas of expertise and biographies and stored them in a Neo4j graph database. We used OpenAI's embedding models to create vector representations of the collected data, allowing for accurate similarity assessments via Neo4j's built-in algorithms. By integrating this system with LangChain, we enabled natural language queries. The results demonstrated high …

Equivocation Analysis Across Continuous And Discrete Memoryless Channels, Md Munibun Billah

Theses and Dissertations

Physical-layer security uses the noise already present in the channel to keep a message secret without making any assumption about the eavesdropper's computing power. In Wyner's wiretap channel model, coset coding uses randomness to map the message to many codewords and protects against information leakage from an active eavesdropper. The secrecy provided by such codes is measured by their equivocation, which is the eavesdropper's remaining uncertainty about the message after she observes her channel. So computing equivocation is an important aspect of analyzing the wiretap channel model. Many channels of practical interest have no closed-form expression for equivocation, and exact …

Co-Designing New Website Ideas In The Age Of Ai, Rami Huu Nguyen

Paul English Applied Artificial Intelligence (AI) Institute Publications

This workshop introduced students to the principles of website co-design in the age of artificial intelligence through a collaborative, project-based learning experience. Participants first explored the mission of the Paul English Applied Artificial Intelligence Institute and the instructor's career journey before learning the fundamentals of e-commerce website design. Students were organized into five teams to develop original website concepts in areas including travel, fashion, sports, and gaming. Each team conducted research using search engines and generative AI tools, including ChatGPT, Gemini, Claude, and Perplexity, created website wireframes, and presented their ideas using Canva. The workshop emphasized teamwork, creativity, user-centered design, …

Experimental Evaluation Of Membranes In The Recovery Of Hydrogen From Serpentinization, Rafael Dos Santos

LSU Master's Theses

Natural hydrogen generated through serpentinization reactions has emerged as a promising low-carbon energy resource. However, serpentinization-derived gas streams commonly contain methane (CH₄) and carbon dioxide (CO₂), requiring purification before hydrogen can be utilized in industrial applications. Membrane-based gas separation technologies offer a potentially cost-effective solution for hydrogen recovery; however, to the best of the author's knowledge, no previous studies have specifically investigated their application to serpentinization-derived gas streams.

This work evaluates the performance of two commercial polymeric membrane modules (Evonik and Generon) and one palladium-copper (Pd-Cu) membrane module (Okaya) for hydrogen recovery from gas compositions representative of serpentinization environments. An …

Global Time-Resolved Measurements Of Inlet/Isolator Unstart Induced By Mass Injection, Andrew N. Bustard, Benjamin L. Bemis, Aaron Marques, Matthew J. Zahr, Thomas J. Juliano

Publications

The inner surface pressure of an axisymmetric inlet/isolator model was measured using anodized-aluminum pressure-sensitive paint (PSP) viewing through cast acrylic. Temperaturesensitive paint was utilized to correct for the PSP’s temperature sensitivity. The model was tested under Mach 5.7 flow at 𝑹𝒆 = 7.1 ×106 /m under conventional noise conditions. Transverse jet injection with jet-to-inlet mass-flow ratios up to 0.8 was used to induce unstart in the inlet/isolator. Background-oriented schlieren visualization of the inlet shocks was collected simultaneously with the PSP to determine when the inlet unstarted. Computational fluid dynamics results were used to determine off-wall flow structures and quantify approach …

Corrigendum To " Urban Transportation Strategy As Urban Sustainable Indicator Frameworks Study Of Masdar City, Abu Dhabi", Rania Badawy Shokry

Mansoura Engineering Journal

No abstract is required for this article.

Straw As A Potential Vegetable Fibre Insulative Infill In Framed Constructions - Material Testing\Tnotereftnote1, Patrick Daly

Journal of Sustainable Construction Materials and Technologies

The construction sector faces increasing pressure to reduce embodied carbon and adopt circular material strategies, with bio-based materials offering a promising pathway. Straw-based insulation, particularly in loose-fill form, has gained traction in Europe, where several products have achieved certification under EAD 040138-01-1201. This study investigates the potential of Irish-processed straw chip as a bio-based insulative infill for framed construction by evaluating its material properties and thermal conductivity–density performance relative to European ETA-certified reference products. A programme of laboratory testing was undertaken on commercially available Irish straw samples, including material characterisation (moisture content, particle morphology, and dust content) and thermal conductivity …

Development And Characterization Of Mycelium-Based Biocomposites From Ganoderma Lucidum Using Spent Yerba Mate And Residual Sunflower Oil For Sustainable Insulation In Construction, Paula V. Alfieri, Guadalupe Canosa

Journal of Sustainable Construction Materials and Technologies

The construction industry urgently requires sustainable alternatives to petroleum-based insulation materials such as expanded polystyrene (EPS) and mineral wool. Mycelium-based biocomposites offer a promising solution by valorizing agricultural waste while delivering competitive thermal and acoustic performance. In this study, developed and characterized biocomposites using Ganoderma lucidum mycelium combined with spent yerba mate and residual sunflower oil (70 g/30 mL), both commonly generated as waste in Argentine institutions. Two formulations were evaluated: high density (HD: 280 ± 5 kg/m³) and low density (LD: 185 ± 5 kg/m³). Samples were cultivated for 90 days at 28 °C and 65% relative humidity and …

Comparative Life Cycle Assessment Of Hemp Walls In Residential Construction In Morocco, Hicham Kaddouri, Rachida Elbarghmi, Firyal Latrache, Marwane Hammouti, Abderrahim Abidouche, Ismael Driouch

Journal of Sustainable Construction Materials and Technologies

This study analyzes the energy and environmental performance of hemp-based wall solutions applied to Moroccan residential buildings by combining dynamic thermal simulation and life cycle assessment (LCA). A reference building is assessed under four representative Moroccan climates (Al Hoceima, Oujda, Marrakech, and Ouarzazate), comparing a conventional wall retrofitted with hemp plaster and a wall incorporating hemp concrete. The results show that hemp concrete significantly reduces annual heating and cooling energy demands by 20–24% depending on the climate, with heating needs decreasing by up to 40% and cooling needs by approximately 15%, particularly in hot and arid regions. The LCA reveals …

Dual-Waste Integration For Geotechnical Improvement: Silica Fume And Eggshell Ash In Kaolin Soil Stabilization, Ng Jun Shen, Muzamir Hasan, Siti Sarah Eliyun, Md. Ikramul Hoque, Mohamad Afiq Jazrin Mohamad Sidek

Journal of Sustainable Construction Materials and Technologies

This study reveals the potential substitution of silica fume and eggshell ash in the technique of soil stabilization, varying across distinct proportions in the modification of geotechnical parameters. The untreated kaolinitic soil which has low soil bearing capacity in nature is frequently reflected in its mechanical instability, for instance, soil settlement and extreme compressibility. By associating the industrial and agricultural material, it is potentially to resolve the above-mentioned issues with explicit designs. A number of laboratory approaches have been implemented in the assessment of basic geotechnical properties, including grain size distribution, Atterberg limits, specific gravity, proctor properties, and shear strength …

Performance Enhancement And Modeling Of Thermochemical Conversion Of Herbaceous And Hardwood Biomass Via Gasification With Integrated Sustainability Evaluation, Sanal Kumar Ap Mr

Theses and Dissertations

This thesis investigates the thermochemical conversion of three biomass feedstocks, namely Prosopis juliflora (PJ), Oryza sativa rice husk (RH), and Sesamum indicum stalk residue (SR), through experimental, simulation, and environmental analyses to evaluate their suitability for sustainable energy production. Thermogravimetric analysis (TGA) was conducted under inert conditions at multiple heating rates to study the thermal degradation and kinetic behavior of the biomasses.

Activation energy was evaluated using Kissinger, Flynn–Wall–Ozawa (FWO), Kissinger–Akahira–Sunose (KAS), Friedman, and Coats–Redfern methods. The results indicated that SR exhibited the highest thermal stability, followed by RH and PJ. Experimental gasification studies were carried out in a throatless …

Application Of Cost-Effective High-Resolution Remote Sensing To Characterize Flooding In Mountain River Corridors, Ishwar Joshi, Ian Gowing, Brian M. Crookston

Civil and Environmental Engineering Student Research

This study evaluated a cost-effective UAV-based multi-sensor approach for characterizing river corridor conditions during and after moderate floods in two mountain river corridors in Northern Utah, USA: the Logan River and Blacksmith Fork River. These study reaches included urban, rural, and agricultural areas, hydraulic structures and bridges, and fish passage structures. A DJI Matrice 300 UAV was used with two separate payloads: an AgEagle Altum-PT multispectral camera and an R3 Pro V2 two-return LiDAR system. The workflow included UAV flight planning and data collection, post-processing of the multi-spectral and LiDAR sensor data, spatial resolution and accuracy assessment, and interpretation of …

Instructional Slides From Molten Salt Electrochemistry Symposium (Moses) 2026, Devin Rappleye, Carlos Mejia, Alex Peroff

Faculty Publications

This instructional slide set was developed for the 2026 Molten Salt Electrochemistry Symposium (MoSES) as an introduction and review of fundamental electrochemical concepts and methods used in molten salt systems. The material is intended for students, researchers, and practitioners seeking to better understand and interpret electrochemical measurements in high-temperature molten salts.

Topics include electrochemical thermodynamics, kinetics, mass transfer, electrode potentials, cyclic voltammetry, chronopotentiometry, chronoamperometry, square-wave voltammetry, electrochemical impedance spectroscopy (EIS), and common approaches for analyzing electrochemical data. Emphasis is placed on building physical intuition, understanding underlying assumptions, recognizing common experimental artifacts, and connecting electrochemical signals to real chemical and transport …

Sustainable Hydrogel From Biowaste: Synthesis And Characterization Of Pectin And Starch-Based Hydrogels Derived From Fruit Peel, Aneesa Rasheed Anwar, Roudha Sultan Almarri, Munawwar Ali Khan, Pramod Kumbhar

All Works

Arid regions such as the United Arab Emirates face persistent challenges in agricultural productivity due to water scarcity, poor soil quality, and the overuse of chemical fertilizers. As a sustainable alternative, biodegradable hydrogels offer promising solutions owing to their high swelling capacity, water retention ability, and controlled release of water and nutrients. This study explored the synthesis and characterization of eco-friendly hydrogels derived from pectin and starch extracted from orange and banana peels, respectively. These biopolymers are cross-linked using calcium and polyvinyl alcohol, forming hydrogels suitable for agricultural applications. The quality of the extracted biopolymers was assessed by analyzing moisture …