Engineering Commons^™

Space 101 (Eps Electrical Power System), Shane Topham

Space Dynamics Laboratory Publications

Introduction

• Power Storage (Battery)
• Power Generation (Solar Arrays)
• Power Regulation & Distribution
• Other EPS functions

Personnel & Team Management, Utah State University Space Dynamics Laboratory

Space Dynamics Laboratory Publications

Agenda

• Team Design
• What is a PM?
• Role "Definition
• Training
• Communication
• Expectation management
• Performance management & feedback
• Tools
• Meetings & tasking
• Gantt charts
• Dashboard
• Risk management

Kinetic Takedown Methods For Unmanned Aerial Systems (Uas), Boston John

Space Dynamics Laboratory Publications

Drone Swarms

• Difficult to detect

• Can overwhelm defense systems

• Low cost makes them ideal for tactical warfare

Nutrient Transport By Overland Sheet Flow On Sites Containing Swine Slurry, John E. Gilley

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Nutrients in agricultural runoff may cause offsite environmental impacts. The objective of this investigation was to examine nutrient transport by overland sheet flow on sites containing swine slurry. Data examined in this study was collected during field rainfall simulation tests conducted on cropland sites in southeast Nebraska, USA. Inflow was added to the top of experimental plots in four successive increments to simulate runoff rates occurring at greater downslope distances. Runoff rates on the experimental sites ranged from 2.3 to 21.2 L min⁻¹ and maximum equivalent downslope distances varied from 5 to 108 m. Phosphorus (P) and nitrogen (N) …

Transport Of Nutrients By Overland Flow On Sites Containing Beef Cattle Manure, John E. Gilley, Ryan P. Mcgehee, Kenneth M. Wacha

Department of Agricultural and Biological Systems Engineering: Faculty Publications

In an inductive metastudy, we investigated the effects of varying rates of overland sheet flow on the transport of phosphorus (P) and nitrogen (N) from sites containing beef cattle manure. The analyzed data were collected during previously reported field rainfall simulation investigations conducted on cropland sites and a beef cattle feedlot in the US state of Nebraska. During the experiments, inflow was incrementally added to the top of the experimental plots to simulate runoff rates occurring at greater downslope distances. Runoff rates on the experimental plots ranged from 2.9 to 22.9 Lmin⁻¹, and the maximum equivalent downslope distances …

Crop2cloud Platform: Real-Time Data Integration For Agricultural Water Monitoring, Bryan Nsoh, Abia Katimbo, Kendall Dejonge, Wei-Zhen Liang, Hongzhi N. Guo, Yufeng Ge, Derek M. Heeren, Yeyin Shi, Xin Qiao, Daran R. Rudnick, Hope Njuki Nakabuye, Birru Girma, Isa Kabenge, Joshua Wanyama

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Efficient water management is vital for sustainable agriculture, yet integrating real-time data for precise irrigation remains a challenge. This study designed the Crop2Cloud (C2C) platform, a system that leverages advanced sensors using Internet of Things (IoT), edge and cloud computing techniques, and computed Water Stress Indices (WSIs) and machine learning models (i.e., fuzzy logic), to provide scalable and real-time irrigation decisions. The C2C platform aggregates several data including Volumetric Water Content (VWC) from TDR sensors (Acclima Inc., US) installed at four multiple depths, canopy temperatures (Tc) measured by Infrared Radiometers (IRTs) (Apogee Instruments, US), as well as weather information and …

Behavioral Insights Impacting Preweaning Mortality, Md Towfiqur Rahman, G. A. Rohrer, S. R. Sharma, Y. Shi, S. M. Leonard, Tami M. Brown-Bandl

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Conclusions

This study investigated the average time spent on posture behaviors (lying, kneeling, sitting, standing) of sows by analyzing the effects of time segments, farrowing crate types, parity, heat lamp configurations, and mortality groups. Sow posture behaviors were significantly influenced by mortality, parity, crate type, heat lamps, and day category. High mortality sows spent less time lying and more time standing events. Parity 1, 2, 3 sows were more active, spending more time kneeling in transitions, lying, and sitting events. Sows in TSL crate had longer lateral right lying and standing events, while ESCSL crates sows had longer sitting events. …

Inactivation Of Zika Virus With Hydroxypropyl-Beta-Cyclodextrin, Cory R. Hewitt, Nicholas J. Wixon, Arthur Gallegos, You Zhou, Victor C. Huber, M. Scott. Killian

Nebraska Center for Biotechnology: Faculty and Staff Publications

Background/Objectives: Zika virus (ZIKV) infection is associated with life-threatening diseases in humans. To date, there are no available FDA-approved therapies or vaccines for the specific treatment or prevention of ZIKV infection. Variation in the ZIKV envelope protein (Env), along with its complex quaternary structure, presents challenges to synthetic approaches for developing an effective vaccine and broadly neutralizing antibodies (bnAbs). We hypothesized that beta-cyclodextrin (BCD) could be used to uniquely inactivate infectious ZIKV without disruption of Env.

Methods: ZIKV was propagated in Vero cells and admixed with BCD. The BCD-treated ZIKV was evaluated for infectivity using immunofluorescence and quantitative …

Characterization Of Multispecies Microbial Communities At Beef And Pork Processing Plants And Their Impact On Pathogen Stress Tolerance, Rong Wang, Sapna Chitlapilly Dass, Vignesh Palanisamy, You Zhou, Tatum Katz, Joseph M. Bosilevac

Nebraska Center for Biotechnology: Faculty and Staff Publications

Escherichia coli O157:H7 and Salmonella enterica are major foodborne pathogens. Biofilm formation may potentially contribute to product contamination by these pathogens at meat processing facilities. Further, pathogen stress tolerance may vary significantly due to the interactions with the multispecies microbial community at meat plants, which may be affected by processing activity, animal species, and the local selective pressure caused by sanitization practices.

We characterized natural microorganisms collected from floor drains at various areas at three beef plants and two pork plants and analyzed their impact on pathogen sanitizer tolerance.

The pathogen strains were able to integrate efficiently into the multispecies …

Future Of Bse Days 2025: Growing A Regenerative Bse, Derek M. Heeren, Santosh Pitla, Jennifer R. Keshwani, Mark Stone

Department of Agricultural and Biological Systems Engineering: Presentations and White Papers

The Future of BSE Days 2025: Growing a Regenerative BSE brought together over 150 faculty, staff, students, and partners to envision the next quarter-century of the Department of Biological Systems Engineering. The event emphasized regeneration—not only of resources and ecosystems, but also of ideas, learning models, and relationships. Across seven major sessions—three Spark Talks and four Pillar Workshops—participants explored how BSE can thrive amid technological disruption, demographic change, and societal transformation.

Key Outcomes

Redefining Impact: This session challenged participants to evolve from counting outputs to valuing relationships, collaboration, and community well-being.

Adaptive Learning Models: This discussion introduced design studios, micro-credentials, …

Development, Characterization And Testing Of Traditonal And Advanced Nuclear Fuel Cladding Materials, Joshua Eddy Rittenhouse

Doctoral Dissertations

Kanthal D and FeCrAl alloys in general, are prospective candidates as accident tolerant nuclear fuel cladding materials. The work presented herein focuses on applying two techniques of severe plastic deformation, equal channel angular pressing (ECAP) and high-pressure torsion (HPT), as means of grain refinement to improve irradiation resistance. Samples of as-received, ECAP, and HPT processed Kanthal D were exposed to neutron irradiation to a dose of 2 DPA at two different temperatures, 300 °C and 500 °C. Detailed characterization was performed including mechanical and microstructural, and several positive improvements with regards to irradiation resistance were identified in the ECAP and …

A Review Of Unmanned Aircraft Systems Safety Reporting And Analysis Of Incidents, Ryker Davis, Neelakshi Majumdar

2025 Research Poster Competition

Unmanned Aerial Systems (UAS), or drones are rapidly integrating into various industries. However, safety concerns regarding their design, training, and operation are rising. To ensure safer integration into the National Airspace System (NAS), it is crucial to understand the potential risks associated with UAS operations. To address these safety concerns, a systematic analysis of UAS incidents is essential to identify common factors and potential risks. There are various sources that record UAS safety events such as accidents and incidents. Analyzing these safety events to identify their causes and contributing factors may help in developing improved design and operations and thereby …

Solo Versus Dual: A Comparative Analysis Of Instructional General Aviation Accidents, Jesse Pham, Neelakshi Majumdar

2025 Research Poster Competition

The Federal Aviation Administration (FAA) oversees and regulates all aviation operations in the United States including General Aviation (GA) (FAA, 2016). General aviation is defined as all civil aviation operations other than scheduled air services and non-scheduled air transport operations for remuneration or hire (ICAO, 2009). The FAA sets the standards for pilot certification and training. Student pilots are required to fly at least a minimum of 40 hours to earn their private pilot license (CFR, 2024). During this time, students are to fly for at least 30 hours with a flight instructor and 10 hours solo, which includes cross-country …

Simulation-Enhanced Bayesian Optimization Of System Designs Using Hybrid Physical And Computer Experiments, Luke Kim, Kelly Sullivan, Haitao Liao, Ed Pohl

2025 Research Poster Competition

We consider the problem of learning and optimizing the performance of a system by conducting a limited number of physical and digital experiments within a design space. Physical experiments are assumed to be unbiased but costly, while digital experiments (e.g., simulations) are less expensive but may introduce bias due to the limitations of the simulation model. This problem is relevant in many fields, such as optimizing engineered systems where performance (e.g., mechanical properties and reliability) depends on various design variables and external/internal factors. Without digital experiments, optimizing the system’s performance amounts to evaluating a noisy and expensive-to-assess black-box function, a …

A Time-Domain Boundary Integral Equation For Moving Acoustic Sources In Uniform Flow And Its Solution By An Advanced Time Propagation Approach, Fang Q. Hu, Douglas M. Nark

Mathematics & Statistics Faculty Publications

This paper presents a time-domain boundary integral equation (TDBIE) formulation for predicting acoustic scattering from moving sources in a uniform mean flow. This work is motivated by the increasing need for accurate aeroacoustic modeling of modern aircraft configurations, including VTOL and eVTOL systems with rotating components. A key challenge in time-domain scattering simulations with moving sources is the determination of retarded time for a given observer time, which involves solving an implicit equation at each time step. This can be computationally costly, particularly for numerical solution of the TDBIE where every surface element on the scattering body acts as an …

Dc To Ac Voltage Source Converter Control System, Mohummad Tark Elgassier, Jordan M. Reichhardt, Brayden Richard Young

Electrical Engineering

The Voltage Source Converter Control System integrates a control system for a 2-phase half-bridge voltage source converter (VSC) utilizing a TMS320F2837xD Dual-Core Real-Time Microcontroller. VSCs are critical for the integration of power production into the power grid. They allow for accurate control over DC-AC energy conversion. Additionally with the improvement of renewable energies VSCs play a critical role in controlling the flow of these environmentally controlled and more unpredictable sources of energy. The control system regulates the output current and voltage, regulates switching patterns, and maintains power stability under varying loads. Within the control system Digital control systems, PWM generation, …

Reset Reengineering, System Engineering & Test Services, David Brenchley, Matt Dayley, Al Dubovik

Space Dynamics Laboratory Publications

Sustainment of aging Department of Defense systems presents significant challenges. The Space Dynamics Laboratory (SDL) offers a cost-effective partnership to help the military maintain or enhance the capability of legacy systems. SDL provides trusted reengineering, system engineering, and test (RESET) services, providing Government-owned technical solutions that help the military:

Passive Thermal Control Technologies: Short Course, Holly Mortensen, Matt Ralphs

Space Dynamics Laboratory Publications

• Introduction to Space Dynamics Laboratory
• Overview - Thermal Control Technologies
• Conductor Bars
• Thermal Straps
• Break
• Radiators
• Thermal Switches

Phase Change Cells, T. Shane Topham, Gail Bingham, Harry Latvakoski, Mike Watson

Space Dynamics Laboratory Publications

Outline

• Phase Change Cell Introduction
• Summary of ISS Phase Change Cell Experiments
• Ground Cell Design Improvements and Test Results

Space Dynamics Laboratory, Brent Carlsen, Doug Jewell

Space Dynamics Laboratory Publications

• Space Dynamics Laboratory
• SDL is a UARC
• RE-SET (Re-Engineering, System Engineering & Test)
• System Test Development

Development Of A Design Tool For Tow-Steered Composite Structures With Machine Learning-Assisted Modeling, Bangde Liu

Industrial, Manufacturing, and Systems Engineering Dissertations - Archive

Fiber-reinforced composites (FRCs) are widely used in aerospace, automotive, and other engineering applications due to their lightweight characteristics and superior mechanical properties. Traditional FRCs employ a fixed fiber orientation in each layer, and while different layup sequences can tailor performance, the mechanical properties remain spatially uniform. Tow-steered composites, which enable fibers to follow curvilinear paths, offer the potential for spatially varying stiffness and strength, improving structural performance.

This dissertation addresses key challenges in modeling and designing tow-steered composite structures, including the lack of commercial design tools, the high computational cost of design optimization, and the need to efficiently evaluate manufacturing …

Deriving Nonlinearity Coefficients From Changing Background, Mark Esplin, Deron Scott, Bryce Walker, Ben Esplin

Space Dynamics Laboratory Publications

Contents

• Quadric Nonlinearity
• Nonlinearity Model and Sensitivity Studies
• Application to CrIS Sensor
• Check Method with Stepped Blackbody Data
• Conclusions

Guidelines For Radiometric Calibration Of Electro-Optical Instruments For Remote Sensing, Utah State University Space Dynamics Laboratory

Space Dynamics Laboratory Publications

SDL Presentation on Radiometric Calibration of Electro-Optical Instruments for Remote Sensing

Voltage And Var Control And Real-Time Digital Simulator-Based Protection System Testing For Power Distribution Systems, Gaurav Yadav

Theses and Dissertations--Electrical and Computer Engineering

Rising power demand calls for electric distribution systems to manage peak load. One option is reducing feeder voltage, which lowers voltage-dependent load demand and may also reduce energy usage. The technique, known as Conservation Voltage Reduction (CVR), may operate independently or within a volt/var control system. This dissertation examines CVR factor calculation using measurements collected at the substation, and proposes a curve-fitting and artificial neural network method to estimate active power losses using input active power, reactive power, and substation voltage. As utilities integrate more inverter-based resources (IBRs) to support increasing demand, rapid voltage fluctuations arise due to the intermittent …

A Framework For Ai Implementation In Construction: Use Cases, Challenges, And Benefits For Contractors, Jaqueline De Aquino Leite Gomes

Theses and Dissertations--Civil Engineering

The construction industry is one of the most important sectors that contribute to the economy worldwide, but it has been very slow in adopting digital transformation. Artificial Intelligence is the backbone of digital innovation, and it can help solve inefficiencies, improve safety, and enhance decision-making in construction. This thesis reviews 85 academic papers, identifies 354 AI use-cases, 180 benefits, and 173 challenges. Key findings have looked at the role of AI in safety monitoring, design optimization, and operational efficiency, while barriers involve data scarcity, high costs, and readiness of the workforce.

All of these challenges have one very handy framework …

Examining Terraform And Bicep: A Comparative Analysis Of Infrastructure As Code Tools For Provisioning Azure Environments, Richard Coffey, Kevin Bayliss

Academic Poster Collection

Examining Terraform and Bicep: A Comparative Analysis of Infrastructure as Code Tools for Provisioning Azure Environments

The Business-Day Cloud: A Hybrid Kubernetes And Serverless Solution For Sustainable Scaling With Predictable Load Patterns, Brendan Burnside, David White

Academic Poster Collection

The Business-Day Cloud: A Hybrid Kubernetes and Serverless solution for Sustainable Scaling with Predictable Load Patterns

Performance Evaluation Of Zabbix And Azure Monitor In Hybrid It Infrastructure, Ivan Godoy, Cormac Keogh

Academic Poster Collection

Performance Evaluation of Zabbix and Azure Monitor in Hybrid IT Infrastructure

Cultural Society Branding, Gabriella Nieves, Katie Parrish

Student Research Design & Innovation Symposium

Cultural Society is a non-profit organization dedicated to inspiring curiosity, improving education, and embracing diversity in our community. The presenters were tasked with creating a new brand identity for Cultural Society, as well as for its AAPI (Asian American and Pacific Islander) History Museum, where people can learn about AAPI history, cultures, and impacts in Rhode Island. The branding was developed in a way that represents Cultural Society's values of creativity, personal action, learning without borders, personal growth, and resilience. Shortly after graduation, one presenter was hired part-time by Cultural Society to design environmental graphics and promotional items for the …

Stowable Communication Board For Wheelchair Users, Andrew Peet, Harrison Ullucci, Aaliyah Couto

Student Research Design & Innovation Symposium

Communication boards are essential tools for individuals who use wheelchairs, experience speech limitations, are paraplegic, or quadriplegic. These simple and affordable devices enable them to effectively express their needs and interact with their environment. Traditional communication boards often present accessibility challenges due to restrictive placement and ergonomic constraints. This prototype integrates a motorized folding mechanism, so the board can be stowed when not in use and includes a selection of boards that can be swapped out. It is designed to enhance the usability and accessibility of communication boards while maintaining the width and mobility of the wheelchair. The prototype incorporates …