Engineering Commons^™

High-Order Dynamic Mode Decomposition For Multidimensional Harmonic Retrieval, Yanming Zhang, Steven Gao, Lijun Jiang

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Estimating channel parameters such as azimuth, elevation, Doppler shift, and delay is a key challenge in wireless communication, often formulated as a multidimensional harmonic retrieval (MHR) problem. To address this, we propose a high-order dynamic mode decomposition (HODMD) framework for robust frequency estimation from high-dimensional signals in noisy environments. The HODMD approach combines high-order singular value decomposition (HOSVD) to decompose tensor data into a core tensor and mode matrices, with dynamic mode decomposition (DMD) to extract frequencies from the imaginary parts of the DMD eigenvalues. Simulation examples validate the effectiveness of the proposed method, demonstrating its efficiency in solving MHR …

Performance Evaluation And Multiphysics Process Modeling Of Carbon Fiber Reinforced Thermoset Composites Using Microwave And Autoclave, Nayan Pundhir, Patrick Schwartzkopf, K. Chandrashekhara, Logan Wilcox, Kristen M. Donnell, Jim Lua, Rui Li

Mechanical and Aerospace Engineering Faculty Research & Creative Works

In this study, IM7/Cycom 5320-1 unidirectional prepreg has been utilized to manufacture 16-layer laminated composites: a symmetric cross-ply ([0°/90°]4s) and a quasi-isotropic ([45°/90°/−45°/0°]2s) configuration. Microwave and autoclave curing processes have been employed to manufacture the laminated composites. The manufactured composite cure was assessed using differential scanning calorimetry (DSC). The quality and porosity of the microwave-cured parts were juxtaposed to those of autoclave-cured parts through optical microscopy and micro-computed tomography (micro-CT) scanning. Mechanical characterization of the microwave-cured panels was conducted using uniaxial tensile and flexural tests, with results juxtaposed to autoclave-cured samples. Experimental characterization revealed that the microwave-cured parts exhibited nearly …

Design And Testing Of An Intrusive Arm For Supersonic Flow Sampling, Caleb Roberts, Davide Viganò

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Intrusive probes are critical tools in supersonic wind tunnel testing, enabling direct measurement of flow properties such as pressure and heat flux. To support these measurements, a single-axis intrusive arm was designed and implemented in the Missouri S&T Supersonic Wind Tunnel. The system is designed to maintains precise probe positioning, while withstanding the aerodynamic loads, and preserving a dynamic seal between the test section and ambient environment. Its modular design accommodates a range of probe types for various research applications. This paper presents the design methodology, including structural, mechanical, and aerodynamic considerations, and details the integration process. System performance was …

Deep Reinforcement Learning-Based Optimal Takeoff Trajectory Design Of An Evtol Drone, Nathan M. Roberts, Bingling Huang, Xiaosong Du

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The continuing development of electric vertical take-off and landing (eVTOL) aircraft presents promising opportunities to alleviate transportation congestion. However, designing and executing takeoff trajectories that optimally balance energy usage, passenger comfort, and aircraft constraints remains challenging. Conventional design optimization provides a solution for pre-defined flight conditions and environments but is not ideal in real-world applications. In contrast, deep reinforcement learning (DRL) implements optimal policy making real-time decisions with no assumption of mathematical models. Seeing the lack of literature on DRL-based takeoff trajectory design of eVTOL aircraft, we implement and conduct DRL-based optimal takeoff trajectory designs for the Airbus³ Vahana …

Industry 5.0, Human–Machine Interface, And Smart Manufacturing In Additive Manufacturing—A Recent Trend, Atiqur Rahman, Md Hazrat Ali, Muhammad Arif Mahmood, Frank Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The emergence and importance of Industry 5.0 are transforming production by integrating smart technology with human creativity and intelligence, especially in advanced additive manufacturing. This critical review precisely analyzes the function of human–machine interfaces (HMIs) in enhancing additive processes, emphasizing their incorporation into smart manufacturing systems and hybrid manufacturing methods, including material extrusion (MEX), laser powder bed fusion (LPBF), and directed energy deposition (DED). It also evaluates artificial intelligence (AI), the Internet of Things (IoT), and cybersecurity, which enhance HMIs in process monitoring, operation, and system adaptability. This study aims to provide a critical analysis and future research direction on …

Optimizing Uav Swarm Deployment For Efficient Communication Signal Strength Alignment In Disaster Scenarios, Mina Khalilzadeh Fathi, Chaoying Pei

Mechanical and Aerospace Engineering Faculty Research & Creative Works

In disaster scenarios, establishing reliable communication infrastructure is critical, and unmanned aerial vehicle (UAV) swarms offer a promising solution as temporary base stations. This study models communication demand in disaster-affected areas by applying Gaussian kernels to building data, forming a spatial demand distribution. Signal strength is estimated using the normalized inverse Free Space Path Loss (FSPL) to account for realistic attenuation. To guide UAV placement, we extract high-demand regions from the demand distribution using a gradient-based thresholding method. Based on this information, we develop a greedy algorithm to iteratively position UAVs for optimal coverage in areas with the greatest communication …

Few-Shot Learning-Enhanced Tiered Path Planning For Mars Rover Navigation, Ziyi Wang, Di Yu, Mina Khalilzadeh Fathi, Chaoying Pei

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Path planning for Mars rovers presents significant challenges due to the diverse terrain, ranging from easily navigable areas to hazardous zones. Traditional methods typically classify terrain simply as passable or impassable, failing to account for the nuances of more moderately challenging areas. In this paper, we introduce a tiered terrain-aware path planning strategy, employing few-shot learning to classify and segment Martian terrain into levels of difficulty. The few-shot learning model, trained on Earth, is sent to the rover, enabling real-time processing of images from satellites or helicopters. The flexibility of few-shot learning, which requires minimal data and training time, enables …

Effect Of Aging Duration On The Microstructure And Corrosion Characteristics Of 17-4 Ph Stainless Steel, G. Narasinga Rao, Subrat Kumar Baral, Y. Madhavi, Sriram Vijayan, Ravikumar Dumpala

Michigan Tech Publications

Heat treatment plays a critical role in inducing key microstructural changes necessary to enhance corrosion resistance of 17-4 PH stainless steel (SS). During the process, precipitates form within the metal matrix, contributing to the strength of the martensitic steel. Inconsistencies in the literature concerning the response of 17-4PH SS to heat treatment have been noted. Therefore, this study examines the impact of aging duration on microstructural characteristics, microhardness, and corrosion resistance of material. The solution heat-treatment process consisted of heating the material to 1040 °C for one hour and rapid cooling in water. Subsequently, aging treatment was carried out at …

Semi-Quantitative Elemental Imaging Of Corrosion Products From Bioabsorbable Mg Vascular Implants In Vivo, Weilue He, Keith W. Macrenaris, Adam Griebel, Maria P. Kwesiga, Erico Freitas, Amani Gillette, Jeremy Schaffer, Thomas V. O'Halloran, Roger J. Guillory Ii

Michigan Tech Publications

While metal materials historically have served as permanent implants and were designed to avoid degradation, next generation bioabsorbable metals for medical devices such as vascular stents are under development, which would elute metal ions and corrosion byproducts into tissues. The fate of these eluted products and their local distribution in vascular tissue largely under studied. In this study, we employ a high spatial resolution spectrometric imaging modality, laser ablation inductively coupled plasma time-of-flight mass spectrometry (LA-ICP-TOF-MS) to map the metal distribution, (herein refered to as laser ablation mapping, or LAM) from Mg alloys within the mouse vascular system and approximate …

Advances In Conductive Polymer-Based Flexible Electronics For Multifunctional Applications, Md Abdus Shahid, Md Mostafizur Rahman, Md Tanvir Hossain, Imam Hossain, Md Sohan Sheikh, Md Sunjidur Rahman, Nasir Uddin, Scott W. Donne, Md Ikram Ul Hoque

Michigan Tech Publications

The rapid developments in conductive polymers with flexible electronics over the past years have generated noteworthy attention among researchers and entrepreneurs. Conductive polymers have the distinctive capacity to conduct electricity while still maintaining the lightweight, flexible, and versatile characteristics of polymers. They are crucial for the creation of flexible electronics or gadgets that can stretch, bend, and adapt to different surfaces have sparked momentous interest in electronics, energy storage, sensors, smart textiles, and biomedical applications. This review article offers a comprehensive overview of recent advancements in conductive polymers over the last 15 years, including a bibliometric analysis. The properties of …

2d Numerical Modeling Of Pavements On Expansive Soil In Extreme Climates, Ekansh Agarwal, Xiong Zhang, Ning Luo

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study focuses on modeling a rigid pavement slab on expansive soil in extreme climates to understand the interaction between weather, pavement, and soil. Lightweight superstructures such as pavements are particularly prone to damage due to the differential settlement of expansive soils. In the context of climate change, the occurrence of severe droughts followed by intense rainfall has risen, causing severe impacts on crack initiation and development, and thus infiltration patterns in the structures built on expansive soils. Pavements are typically designed for a limited lifespan, and early failure may occur if climate change is not considered during design. This …

Focused Feature Extraction For Driver Drowsiness Detection Using An Enhanced Attention-Based Resnet Model, Nada Ayman Atia, Rawan Sameh

The Undergraduate Research Journal

In the context of increasing road safety concerns, particularly in Egypt, this paper addresses the critical issue of driver drowsiness, a significant contributor to road accidents worldwide. With alarming statistics from the World Health Organization citing human error, chiefly drowsiness, as the cause for a majority of road accidents in Egypt, there is a compelling need for an effective drowsiness detection system. This research introduces a novel, vision-based driver drowsiness detection system leveraging a multi-dimensional approach with a Residual Neural Network (ResNet) architecture and attention layers. This system aims to accurately identify drowsiness by analyzing key facial features. The paper …

Identifying Potential Risk Areas Close To The Oil And Gas Pipelines Due To Subsidence In Qazvin Plain, Mahmoud Rajabi, Sanaz Vajedian, Ryan Smith, Neil Grigg, Hossein Nahavandchi, Mehdi Goli

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Surface displacement caused by natural and anthropogenic activities poses a significant risk to subsurface pipelines, particularly in areas experiencing subsidence. Stress and strain induced by deformation can lead to pipeline buckling and potential vulnerability. This study applies a multidisciplinary approach integrating interferometric synthetic aperture radar (InSAR) deformation analysis, well data, and geological context to assess the risk to oil and gas pipelines in Iran's Qazvin plain. The focus is on evaluating the impact of an unconfined aquifer, which has a lower risk of subsidence compared to a confined aquifer, on pipeline infrastructure. We analyzed multitemporal Sentinel-1 data collected between 2014 …

Drone Medical Package Delivery For Improved Transportation And Better Patient Outcomes Final Implementation Report, Amro El-Adle, Madeline Alden, Yin-Hsuen Chen, Melissa Davidson

Information Technology & Decision Sciences Faculty Publications

The Drone Medical Package Delivery for Improved Transportation and Better Patient Outcomes planning and prototyping grant involves five partners, including Accomack-Northampton Planning District Commission (A-NPDC), Riverside Health System, Old Dominion University (ODU), Virginia Institute for Spaceflight & Autonomy (VISA), Virginia Innovation Partnership Corporation (VIPC), and DroneUp. The partners worked together to address access, safety, reliability and sustainability for medical and emergency response package delivery via drone, specifically, where the use of aerial drones could lead to better patient outcomes and improved safety and emergency response.

The goal of the project was to develop an operational prototype that woul evolve into …

Development Of Self-Healing Polymer From Bio-Based Benzoxazine Blend With Poly(Ethylene Glycol) For Anti-Biofouling Applications, Pharaporn Yodkum

Chulalongkorn University Theses and Dissertations (Chula ETD)

Biofouling remains a significant challenge in marine industries, as conventional coatings often lose their antifouling efficacy once they become damaged. Incorporating self-healing capabilities into antifouling coatings has therefore emerged as a promising strategy to extend service life and maintain long-term performance. In this study, self-healing polymers were developed based on a bio-derived benzoxazine resin (E-fa), synthesized from renewable precursors including eugenol (a phenol source), furfurylamine (an amine source), and paraformaldehyde, and subsequently blended with poly(ethylene glycol) (PEG). The blends were formulated with varying weight ratios (95/5, 90/10, 85/15, and 80/20 wt/wt%) and PEG molecular weights (PEG-600, PEG-1500, and PEG-4000). This …

Comparing Funders' Altruism Versus Self-Interest: Leveraging The Context Of Crisis, Dan Liu, Guangzhi Shang, Cynthia Fan Yang

Journal of International Technology and Information Management

While reward-based crowdfunding has widespread popularity, the motivations driving funders, balancing self-interest and altruism, have remained puzzling. Prior research has been constrained by examination methods and produced mixed findings regarding the weight of altruism versus self-interest among funders. Our study takes a fresh perspective, delving into funder behavior amid a major crisis—the tumultuous backdrop of the COVID-19 pandemic. Our findings reveal that funders not only display an increased willingness to contribute but also significantly amplify their contributions, particularly to projects in crisis-affected regions, irrespective of external incentives like rewards. This underscores the prevalence of altruistic motives among funders in challenging …

Understanding The Determinants Of Blockchain Adoption: An Empirical Study, Amarpreet Kohli, Nihar Kumthekar, Piyush Shah, Rebecca Jauch

Journal of International Technology and Information Management

Blockchain technology (BT) has the potential to enhance security and robustness of transactions through a distributed ledger bookkeeping process. This study employs technology-organization-environment (TOE) framework and threat-rigidity theory (TRT) to examine whether perceived disruption caused by COVID-19 pandemic significantly impacted the adoption of BT, and inclination to adopt BT in the US. The COVID-19 pandemic provided a unique backdrop, as it affected businesses across all industries, sizes, and geographies. Results show a non-significant effect of perceived pandemic disruption on the current stage of BT adoption and intention to adopt BT. However, disruption readiness positively influences the current stage of BT …

Comparing Vr And Tv In Nigeria And The U.S.: Impacts On Empathy, Engagement, And Enjoyment, Jinhee Yoo, Eugene A. Ohu, Radosław Mącik

Journal of International Technology and Information Management

This study (N = 170), involving participants from Nigeria and the U.S., investigated how different technologies (TV and VR) affect users' empathy (α = .93), engagement (α = .93), enjoyment (α = .93), preferences, and likelihood of technology use. Participants watched an animated documentary titled “Is Anna OK?” at two different time points, utilizing VR (Oculus Rift S) and TV, following which they completed measuring empathy, engagement, enjoyment, device preference, and usage likelihood. Analysis via one-way ANOVA and chi-square tests revealed that VR users reported significantly higher empathy and enjoyment compared to TV viewers, particularly on second viewing. Combining both …

Quantifying Inositol Phosphate Dephosphorylation To Understand The Role Of Recalcitrant Organic Phosphorus Forms On Harmful Algal Blooms In Freshwater Systems, Iffat Tasnim

College of Graduate Studies: Theses & Dissertations

Organophosphorus such as phytic acid, a surrogate species of inositol phosphate (IP), may serve as a source for orthophosphate (OP) in freshwater. In absence of OP, competent aquatic microorganisms upregulate the production of specialized enzymes to obtain growth-sustaining OP from organic phosphorus (org-P) forms. The contribution of recalcitrant org-P to the OP pool has been overlooked due to the lack of capable tools to measure OP production from org-P accurately. The objective of this study was to quantify OP production from phytic acid (a surrogate form of recalcitrant org-P) to assess the contribution of recalcitrant org-P forms to the total …

One-Dimensional Numerical Analysis Of A Novel Elastohydrodynamic Seal For Supercritical Co2 Power Cycles With Experimental Validation And Future Approach, Cole B. Hayne

College of Graduate Studies: Theses & Dissertations

This thesis presents a numerical analysis and experimental verification approach for a novel elastohydrodynamic (EHD) seal designed with the specific application of supercritical carbon dioxide (sCO₂) power cycles. Brayton power cycles with sCO₂ as the working fluid have gained significant traction as potential large-scale power generation methods. This increase in interest and research is primarily due to their many beneficial characteristics, such as high thermal efficiency, compact geographic footprint, reduced capital costs, and lower water and fuel usage than comparable power cycles. Despite these many positive qualities, proper sealing technology remains one of the primary barriers to …

Synthesis And Assessment Of Biobased Acrylated Epoxidized Soybean Oil Resins For Stereolithography 3d Printing Of Microfluidic Devices, Natalie S. Romero Figueroa

College of Graduate Studies: Theses & Dissertations

This research focuses on the development and characterization of a biobased photocurable resin synthesized from soybean oil for use in stereolithography (SLA) 3D printing of microfluidic devices. The study explores a sustainable alternative to petroleum-based resins by performing an acrylation reaction on epoxidized soybean oil (ESO) to produce acrylated epoxidized soybean oil (AESO), which was then formulated into a photocurable resin with the addition of a photo initiator. The fabrication process involved designing microfluidic molds in SolidWorks and printing them using an Elegoo Mars 4 SLA printer under various exposure and layer thickness parameters. The printed samples consisted of microchannels …

Effect Of Alloying Additions On Austenite Refinement In Nickel-Alloyed Ductile Cast Irons, Adnan Adib Aahamed

College of Graduate Studies: Theses & Dissertations

The benefits associated with the application of ductile irons are significantly attributed to the control of microstructures, with refinement of austenitic matrix during solidification playing a significant role. Nickel alloyed ductile irons are attractive due to their potential for high ductility and suitability for potential high-temperature applications with stable austenitic microstructure. Refinement of austenite grain structure is thus important to enhance the mechanical properties of the alloyed ductile iron. This research investigates the impact of in-mold additions of different alloying elements on the austenite morphology and grain refinement of nickel-alloyed ductile iron along with the associated mechanical properties. A hypoeutectic …

Fault Box Modeling Of Dip Slip Faults: A Framework For Fault Box Design And Future Studies, Hailey Pressnell

Master's Theses

The behavior of soils during surface fault rupture is a serious concern in the planning and design of infrastructure that may be located within or near a fault zone. Challenges associated with developing mitigation measures for surface fault rupture include the uncertainty of fault rupture and the variability of fault behavior. Current analytical procedures define surface fault rupture according to the type of fault movement (strike slip, normal or reverse), the amount of displacement on the fault, and the mechanics of the material overlying the fault. The purpose of this thesis is to reconfirm analytical solutions and gain a better …

The Effect Of Liquid Conductivity On A Helium Plasma Jet And The Hydrogen Peroxide Production, Edwin A. Oshin, M. Ziaur Rahman, Chunqi Jiang

Bioelectrics Publications

Understanding plasma-liquid interactions and the impact of the electrical conductivity (σ) of liquid on plasma is important for plasma applications in water treatment and medicine. Ultrapure water, phosphate-buffered saline (PBS) solution, biological media, and sodium chloride (NaCl) solutions at various concentrations were used in this study to provide a broad range of conductivity values ranging from 0.055 μS cm⁻¹ to 222 mS cm⁻¹. A helium atmospheric pressure plasma jet (APPJ) impinging on liquid was generated in ambient air using a hollow-needle electrode that was powered by 200 ns, 7 kV pulses at a pulse repetition frequency of …

Determining The Transient Electric Field And The Effect Of Pulse Repetition Frequency On The Field In A Repetitive 10-Ns Pulsed Discharge In A Quiescent Ch₄-Air Mixture, Chunqi Jiang

Bioelectrics Publications

The goal of this research is to understand the underlying physics enabled by nanosecond pulsed power in a discharge initiation and the following physicochemical processes that favor lean-fuel plasma ignition for combustion. The hypothesis of this project is that pulsed power waveforms such as the pulse repetition frequency (PRF), voltage amplitude, and dielectric surface alter the reduced electric field during the initiation of the discharge, resulting in different plasma properties, which will vary the physicochemical processes for efficient and selective radical productions. This is especially important for lean-burn combustion and reducing emission.

Groundwater Pumping Impacts On Stream Depletion In Humboldt County, Ca: Integrating Analytical Models And Field Data, Andy Hans Heise

Cal Poly Humboldt theses and projects

This study addresses the significant concern of stream depletion from groundwater pumping in Humboldt County, CA. The objective of this study is to develop an analytical model for estimating stream depletion and integrating field data into model parameters.

The methodology involved conducting a field study near three operating wells by a stream, installing stream gages upstream and downstream of the wells, and recording pumping rates and schedules for two of the wells. The third well’s pumping data was synthetically generated, for privacy concerns of the well owner. The StreamDepletR package was used for estimating depletion rates in a stream in …

From Spark To Wildfire: Predicting Wildfire Origins And The Efficacy Of “Fire Safe” Cigarettes In California Grasslands, Trevor Blackwell Haltermann

Cal Poly Humboldt theses and projects

As wildfires in North America increase in size and frequency, the societal impacts become greater as well. With greater risk and high fire suppression costs it is pertinent to improve fire investigation methods and limit the potential for human caused ignitions. Two distinct studies were carried out to assess the accuracy of fire pattern indicators and the efficacy of “fire safe” cigarette technology in lowland grass fuel types in California. The first study utilized 24 experimental small-scale fires within a wind tunnel to examine the accuracy of microscale fire pattern indicators and the factors that influence the accuracy of predictions …

Adaptation And Validation Of The Small Strain Hardening Soil Model For Sensitive Clays In Eastern Canada, Jose Fidelis Zanavelo, Denis Leboeuf, Bertrand Galy

Articles dans des actes de congrès

This study focuses on the modelling of the complex behaviour of Champlain Sea deposits of Éastern Canada. Sensitive clays present unique geotechnical challenges due to their significant strength loss upon remolding and complex stress-strain response. The research was conducted in two phases: (1) a laboratory investigation of Louiseville clay under various stress paths and (2) the development and validation of a modified constitutive model based on the Hardening Soil model with small-strain stiffness (HSsmall). Standard HSsmall showed limitations in representing the behaviour of structured sensitive clays, especially in the overconsolidated range. To address this, the HSSstruct model, which improves upon …

Human Perception Of Ai Capabilities At Classifying Perturbed Roadway Signs, Katherine R. Garcia, Jing Chen, Yanru Xiao, Scott Mishler, Cong Wang, Bin Hu

Psychology Faculty Publications

Artificial Intelligence (AI) is crucial to numerous functions required for driving automation systems, including the computer vision techniques used to detect the roadway environment and make real-time decisions. However, the images used as inputs to the AI system may be maliciously perturbed, or manipulated, causing the AI system to make an incorrect classification. In this study, we examined humans’ perception of the AI’s computer vision capability of classifying various road sign images, including the original images, images with two different types of malicious attacks, and images that are scrambled randomly at the pixel level. Our results showed that participants rated …

Food Waste Crisis In The United States Of America: The Known, The Overlooked And The Undisclosed, Sagarika Srivastava, David J. Tonjes

Technology & Society Faculty Publications

With a loss of 1,250 calories per day per person or 140 kg/p/yr, the United States (U.S.) has a large problem with food waste. The later a product is wasted in the supply chain, the greater its environmental cost. Many food waste mitigation efforts focus on the retail and consumer stages, but there is also considerable food waste in the production phase, which includes growing, harvesting, transportation, storage and processing. The study is conducted in two steps: a bibliometric analysis of 218 articles on food waste in the U.S., followed by an investigation of options to meet food waste recovery …