Engineering Commons^™

Compression Of Climate Data Through Artificial Neural Networks, Astha Puri

UNLV Theses, Dissertations, Professional Papers, and Capstones

Lately, there has been a tremendous increase in the number of climate monitoring

stations in various parts of the country producing abundant climate data. Among climate data parameters, humidity and temperature are the two parameters influencing hydrological and agricultural processes, weather monitoring, and having critical effect on living organisms. As more data is being generated over time, there is a strong need to develop compression methods for efficient transfer and storage of this data.

The main goal of this thesis is to perform compression of humidity and temperature

data via prediction. As these are critical components of climate, it is …

The Comparison Of Two Supine Manikins And The Use Of A Shock And Vibration Isolation System For Litter Patients In Air Medical Transport, Karina Karlui Saenz Acosta

UNLV Theses, Dissertations, Professional Papers, and Capstones

Studies show that repeated shock and vibration during aero medical and ground transport are causing patient pain and may be adversely affecting patients’ medical outcome. Patients with spine and head injuries and other severe neurological injuries are the most vulnerable to repeated shock and vibration exposure caused by the vehicle. It is crucial to minimize the effects of these forces on patients during air and ground medical transport. The development of new medical evacuation platforms creates a need to better understand the effects of human exposure to shock and vibration. The use of human subjects to measure whole body vibration …

Hierarchical Control Strategies For Heaving Wave Energy Converters, Omsalama Mubarak Mohamed Saeed

Theses

This thesis concerned with developing control strategies for a heaving sea wave Energy converter. The objective of this study is to improve captured and converted. Power. In heaving wave energy converters using a robust hierarchical control strategy. This strategy consists of higher and lower hierarchical controller. The higher controller provide a reference velocity signal, whereas the lower one follows the reference despite the uncertainties in the model. In this thesis, two novel methods for the higher controller are proposed. The objective of the first method is to design the intrinsic resistance that maximizes the captured power while considering the constraint …

Accelerated Fog Removal From Real Images For Car Detection, Rawan Ibrahim Khader Younis

Theses

Image de-hazing improves the visual quality of images in computer vision applications, such as object detection and object tracking. Fog removal from car photos taken by street cameras is considered essential to accurate car detection. An accelerated image enhancement technique is presented for car detection as part of an effort to count cars using existing street cameras for the purpose of traffic management. Two aspects of car detection are tackled: 1) An existing image fog removal technique is accelerated by replacing a time consuming image filter with a faster filter while maintaining negligible image degradation, 2) A quick and practical …

An Application Of Fuzzy Logic In Urban Traffic Incident Detection, Feda Wasfi Fayez Mustafa

Theses

Traffic congestion in urban areas is an increasing problem around the world. Traffic incidents (such as accidents) are considered as the major source of traffic congestion. Traffic incidents have negative impacts on traffic flow, air pollution and fuel consumption. As a result, increasing interest in finding new techniques to deal with this issue has been shown. Traffic incident-management systems can decrease the effect of such events and keep roads capacity as close as possible to normal levels. Incident detection system is an important part of any incident management system. This thesis proposes a new approach to incident detection in urban …

Designing Eye Tracking Algorithm For Partner-Assisted Eye Scanning Keyboard For Physically Challenged People, Zeenat S. Al-Kassim

Theses

The proposed research work focuses on building a keyboard through designing an algorithm for eye movement detection using the partner-assisted scanning technique. The study covers all stages of gesture recognition, from data acquisition to eye detection and tracking, and finally classification. With the presence of many techniques to implement the gesture recognition stages, the main objective of this research work is implementing the simple and less expensive technique that produces the best possible results with a high level of accuracy. The results, finally, are compared with similar works done recently to prove the efficiency in implementation of the proposed algorithm. …

Numerical Validation Of Cooling Performance Of Phase Change Materials Integrated Into Heat Sinks For Electronics Cooling, Shaimaa Mohamed Abu Ayyan

Theses

This study aims to analyze the cooling performance of phase change materials (PCMs) integrated into metallic heat sinks (HSs) both experimentally and numerically. For the experimental part of the study, a test setup has been constructed to test PCM integrated heat sinks. The heat sinks are prepared as metallic containments having fins with fixed inter-fin spacing. The volume between the heat sink fins is filled with PCM namely: a paraffin wax, salt hydrate-calcium chloride and milk-fat, then the whole system is sealed for testing under various heat loads at 4W, 6W, 8W and 10W. Four modes of operation are experimentally …

Shear Behavior Of Steel-Fiber Reinforced Ultra-High-Strength Self-Compacted Concrete Beams, Omar Jum’Ah Za’Al Al Rawashdeh

Theses

Ultra-high-strength concrete is a new class of concrete that has been the result of the progress in concrete material science and development. This new type of concrete is characterized with very high compressive strength; about 100 MPa. Ultra-high strength concrete shows very brittle failure behavior compared to normal-strength concrete. Steel fibers will significantly reduce the workability of ultra-high strength concrete. The development and use of self-compacting concrete has provided a solution to the workability issue. The combination of technology and knowledge to produce Ultra-High strength fiber reinforced self-compacting concrete was proved to be feasible. Few studies investigated the effect of …

Learning Query And Image Similarities With Ranking Canonical Correlation Analysis, Ting Yao, Tao Mei, Chong-Wah Ngo

Research Collection School Of Computing and Information Systems

One of the fundamental problems in image search is to learn the ranking functions, i.e., similarity between the query and image. The research on this topic has evolved through two paradigms: feature-based vector model and image ranker learning. The former relies on the image surrounding texts, while the latter learns a ranker based on human labeled query-image pairs. Each of the paradigms has its own limitation. The vector model is sensitive to the quality of text descriptions, and the learning paradigm is difficult to be scaled up as human labeling is always too expensive to obtain. We demonstrate in this …

Robust Execution Strategies For Project Scheduling With Unreliable Resources And Stochastic Durations, Na Fu, Hoong Chuin Lau, Pradeep Varakantham

Research Collection School Of Computing and Information Systems

The resource-constrained project scheduling problem with minimum and maximum time lags (RCPSP/max) is a general model for resource scheduling in many real-world problems (such as manufacturing and construction engineering). We consider RCPSP/max problems where the durations of activities are stochastic and resources can have unforeseen breakdowns. Given a level of allowable risk, (Formula presented.), our mechanisms aim to compute the minimum robust makespan execution strategy. Robust makespan for an execution strategy is any makespan value that has a risk less than (Formula presented.). The risk for a makespan value, (Formula presented.) given an execution strategy, is the probability that a …

Direct Adaptive Control For Stability And Command Augmentation System Of An Air-Breathing Hypersonic Vehicle, Ron Aditya

Doctoral Dissertations and Master's Theses

In this paper we explore a Direct Adaptive Control scheme for stabilizing a non-linear, physics based model of the longitudinal dynamics for an air breathing hypersonic vehicle. The model, derived from first principles, captures the complex interactions between the propulsion system, aerodynamics, and structural dynamics. The linearized aircraft dynamics show unstable and non-minimum phase behavior. It also shows a strong short period coupling with the fuselage-bending mode. The value added by direct adaptive control and the theoretical requirements for stable convergent operation is displayed. One of the main benefits of the Directive Adaptive Control is that it can be implemented …

Low-Velocity Impact Analysis Of Composite Repair Patches Of Different Shapes, Sarvesh Baliga

Doctoral Dissertations and Master's Theses

The area under crack for various structures can be effectively repaired by the use of composite materials. Low velocity impact can cause barely visible damage to the interior structure of laminated composite. These impacts can cause delamination in composite materials. In this study, a Finite Element Analysis was conducted using Abaqus/Explicit and the results of the analysis were compared to the experimental data from literature. E-glass/epoxy composite laminate was subjected to a low velocity impact test. To study the effect of patch repair, a composite patch was applied on a cracked laminate and a low velocity impact was then conducted …

Lagrangian Points And Jacobi Constants For A Class Of Asteroids, Tasneem Rashid

Doctoral Dissertations and Master's Theses

Asteroid Gravitational Potentials are difficult to model owing to their irregularity in shape. This thesis focuses on two approaches to model asteroid gravity fields, namely, multiple-body and spherical harmonics modeling. Computation of gravity potential serves as a first step to determine equilibrium points called Lagrangian points for a spacecraft orbiting as an asteroid. Further, Jacobi analysis is carried out to determine zero-velocity regions, i.e., inaccessible regions corresponding to the unstable Lagrangian points. Multiple sphere modeling was studied through analysis of so called Asteroid Restricted Three and Four Body Problems, providing insight into the method of modeling an asteroid as a …

Experimental And Computational Investigation Of Ribbed Channels For Gas Turbine Thermal Management, Yash T. Mehta

Doctoral Dissertations and Master's Theses

This study focuses on the computational benchmarking as well as validation against experimental results of a rib roughed surface in an internal channel of a stationary turbine blade. STAR-CCM+ was utilized to replace a model from a published article, and to analyze the CFD conjugate heat transfer by determining the turbulence model that best matched the published experimental values. Using those computational conditions and CFD results, an in house experimental rig was validated by comparing convective heat transfer coefficients and pressure profiles. This cooling method, when compared to a smooth channel, enhances turbulent mixing my separating and reattaching the boundary …

An Approach To Automotive Electrification And Testing, Christopher Rowe

Doctoral Dissertations and Master's Theses

In order to compete in the EcoCAR 2 competition, Embry-Riddle Aeronautical University has redesigned the Powertrain of a 2013 Chevrolet Malibu into a plug-in hybrid electric vehicle. This endeavor was made possible by the EcoCAR 2 competition sponsored by the Department of Energy, General Motors, and Argonne National Laboratory. The Powertrain was changed from a conventional internal combustion engine with a start/stop capability, to a fully electric Powertrain, with a diesel generator, and plug in charging capability. This paper will cover the electrical work performed on the vehicle during the summer prior to year three of the competition, EcoCAR 2 …

Numerical Study Of Synthetic-Jet Actuation Effect On Airfoil Trailing Edge Noise, Marco Sansone

Doctoral Dissertations and Master's Theses

The current study conducts numerical simulations to assess the possibility of employing Synthetic Jet Actuators (SJAs) as active noise control devices for reduction of airfoil acoustic radiation. High-accuracy numerical efforts employ a sixth-order accurate Navier-Strokes solver implementing a low-pass filtering of poorly resolved high-frequency solution content to retain numerical accuracy and stability over the range of transitional flow regimes. In the adopted numerical procedure, the actuator is modeled without its resonator cavity through imposing a simple fluctuating-velocity boundary condition at the bottom orifice of the actuator. The orifice cavity with the properly defined boundary condition is embedded into the airfoil …

Design, Fabrication, And Testing Of A Proprioceptive Electroadhesion Pad For Space Applications, Walter Saravia

Doctoral Dissertations and Master's Theses

The purpose of this study is to design, analyze, and fabricate an electroadhesion mechanism with the goal of providing controlled electrostatic adhesion to objects with little known surface finish, of varying curvature, and different materials. The main purpose of the mechanism is that of ensuring a soft docking, controlled in closed loop, for attachment to large pieces of orbital debris. Other envisaged purposes for the mechanism are sample collection and manipulation in free-fall and in-situ analysis of cohesive forces in regolith at small bodies, such as asteroids or comets. Electrostatic finite element analysis was performed on various electroadhesion pad designs …

Computation Of Hypersonic Flows With Lateral Jets Using K-Ω Turbulence Model, Spatika Dasharati Iyengar

Doctoral Dissertations and Master's Theses

Thermal Protection systems (TPS) are used as shields in space vehicles which encounter high heat and temperatures at the reentry altitudes. Among them, the cooling techniques and the ablative coatings are most popular. However, they have their own weight limitations. In the recent decade, another classification of TPS called the Non-Ablative Thermal Protection systems (NaTPS) have gained significance. The spike-lateral jet method is an NaTPS concept proposed for drag and heat flux reduction in hypersonic nose cones. Numerical simulations are conducted to analyze the effectiveness of spike-lateral jet concept at re-entry altitudes. The spike attached to the hemispherical nose has …

The Three-Dimensional Turbulent Boundary Layer On A Rotating Disk, Daniel Digre

Doctoral Dissertations and Master's Theses

Three-dimensional turbulent boundary layers (3DTBL) are seen quite commonly in nature as well as in the engineering applications. Despite this, very few high Reynolds number studies have been carried out on these boundary layers, particularly focusing on eddy structure, eddy scales and their interactions. The current study focused on developing, characterizing and evaluating an experimental framework to study high Reynolds number #3DTBL on a rotating disk with the long-term goal of carrying out high-fidelity measurements. The rotating disk flow is characterized by weak centrifugal pumping which sets up the cross flow that leads to turbulence. The tangential and radial velocities …

An Open-Source, Automated Chemical Vapor Deposition System For The Production Of 2d Materials, Dale Brown

Boise State University Theses and Dissertations

While interest in two-dimensional materials has exploded in recent years, the high cost of chemical vapor deposition (CVD) systems can act as a barrier to entry for some researchers interested in studying these materials. This thesis presents an open-source design for an automated CVD that can be built for a fraction of the cost of similarly capable commercial systems and that can easily be customized and expanded.With a CVD built as described,growth of high quality graphene and graphene foam is demonstrated.These results highlight the flexibility of the open-source design in producing a variety of nanomaterials, which are at the forefront …

Electrolyte Optimization Study For Tio2 Nanotube Electrode In Sodium Ion Batteries, Richard Wendel Cutler

Boise State University Theses and Dissertations

Batteries are ubiquitous in daily life. Sodium-ion batteries have the potential to become inexpensive alternatives to the current market products such as Lithium-ion batteries. TiO₂ nanotubes have proven potential as an anode for Na-ion batteries. Electrolytes made by NaClO₄ salt and carbonate-based solvents make up commonly used electrolytes in sodium ion battery research. We used electrochemical and physical characterization tests to evaluate the optimum electrolyte for this anode material in the Na system. We determined that the ClO₄^- ion decomposes at the TiO₂ surface and promotes the formation of an unstable solid electrolyte interphase. A …

Plastic Deformation And Effective Strain Hardening Coefficient Of Irradiated Fe-9wt%Cr Ods Alloy By Nano-Indentation And Tem, Corey Kenneth Dolph

Boise State University Theses and Dissertations

The objective of this study is to characterize changes in the yielding, and effective strain hardening coefficient of an oxide dispersion strengthened (ODS) alloy upon exposure to irradiation. It is well known that irradiation produces a supersaturation of defects, which alters the mechanical properties of a material. In order to engineer materials for use in advanced nuclear reactors, the long-term effects of neutron irradiation on mechanical performance must be understood. However, high-dose neutron exposure is often simulated using ion bombardment. Unfortunately, ion irradiation results in a shallow damage layer that prevents traditional bulk mechanical characterization methods from being utilized. A …

A Small Acoustic Goniometer For General Purpose Research, Michael Pook

Boise State University Theses and Dissertations

Understanding acoustic events and monitoring their occurrence is a useful aspect of many research projects. In particular, acoustic goniometry allows researchers to determine the source of an event based solely on the sound it produces. The vast majority of the acoustic goniometry research projects used custom hardware targeted to the specific application under test. Unfortunately, due to the wide range of sensing applications, a flexible general purpose hardware/firmware system does not exist for this research. This dissertation focuses on the development of such a system which encourages the continued exploration of general purpose hardware/firmware and lowers barriers to research in …

Laboratory Resilient Modulus Measurements Of Aggregate Base Materials In Utah, Kirk David Jackson

Theses and Dissertations

The Utah Department of Transportation (UDOT) has fully implemented the Mechanistic-Empirical Pavement Design Guide for pavement design but has been using primarily level-three design inputs obtained from correlations to aggregate base materials developed at the national level. UDOT was interested in investigating correlations between laboratory measurements of resilient modulus, California bearing ratio (CBR), and other material properties specific to base materials commonly used in Utah; therefore, a statewide testing program was needed. The objectives of this research were to 1) determine the resilient modulus of several representative aggregate base materials in Utah and 2) investigate correlations between laboratory measurements of …

An Integrated Framework For Fostering Human Factor Sustainability And Increased Safety In Aviation Ramp Operations, Sarah M. Hubbard, Denver Lopp

Journal of Aviation Technology and Engineering

The aviation work environment has one of the highest accident rates of any industry sector in the United States, resulting in significant costs for both employee injuries and equipment damage. In fact, injury rates exceed rates found in areas that are widely recognized as hazardous, such as construction and mining, and it is estimated that aircraft ground damage costs are as high as 5 billion to 10 billion dollars per year. Purdue University’s Aviation Technology Department has conducted numerous safety and human factors studies in the past decade encompassing maintenance and repair operations, corporate flight departments, and over ten major …

Tailwinds Can Reduce Groundspeed Too, Nihad E. Daidzic

Aviation Department Publications

FAA Safety Seminar (GL1565666) held at Minnesota State University, Mankato Ostranger Auditorium at 18:30 CST on Monday, November 30, 2015.

College Of Engineering News, Georgia Southern University

College of Engineering & Computing: News & Publications (2010-2023)

• IT Students Win 1st Place in Mobile App Competition

Improved Sensitivity To Fluorescence For Cancer Detection In Wide-Field Image-Guided Neurosurgery, Michael Jermyn, Yoann Gosselin, Pablo A. Valdes, Mira Sibai, Kolbein Kolste

Dartmouth Scholarship

In glioma surgery, Protoporphyrin IX (PpIX) fluorescence may identify residual tumor that could be resected while minimizing damage to normal brain. We demonstrate that improved sensitivity for wide-field spectroscopic fluorescence imaging is achieved with minimal disruption to the neurosurgical workflow using an electron-multiplying charge-coupled device (EMCCD) relative to a state-of-the-art CMOS system. In phantom experiments the EMCCD system can detect at least two orders-of-magnitude lower PpIX. Ex vivo tissue imaging on a rat glioma model demonstrates improved fluorescence contrast compared with neurosurgical fluorescence microscope technology, and the fluorescence detection is confirmed with measurements from a clinically-validated spectroscopic probe. Greater PpIX …

Effect Of Nano-Oxide Particle Size On Radiation Resistance Of Ironechromium Alloys, Weizong Xu, Lulu Li, James A. Valdez, Mostafa Saber, Yuntian Zhu, Carl C. Koch, Ronald O. Scattergood

Mechanical and Materials Engineering Faculty Publications and Presentations

Radiation resistance of Fe-14Cr alloys under 200 keV He irradiation at 500 ­*C was systematically investigated with varying sizes of nano oxide Zr, Hf and Cr particles. It is found that these nano oxide particles acted as effective sites for He bubble formation. By statistically analyzing 700-1500 He bubbles at the depth of about 150-700 nm from a series of HRTEM images for each sample, we established the variation of average He bubble size, He bubble density, and swelling percentage along the depth, and found them to be consistent with the He concentration profile calculated from the SIRM program. Oxide …

Inject And Sustain Sustainability (Is2) In Automatic Fare Collection Projects, Hillary Kin Hung Lau, Nicholas Chun Kit Wong

Practical Social and Industrial Research Symposium

No abstract provided.