Engineering Commons^™

Comparative Analysis Of Buckling-Restrained Braced Frames In Eccentric Configuration (Brbf-Es) And Eccentrically Braced Frames (Ebfs), Peter T. Vayda

Civil Engineering Undergraduate Honors Theses

Continuing on the findings of “Using Buckling-Restrained Braced Frames in Eccentric Configuration,” by Dr. Gary S. Prinz, P.E., which determined that, from a performance standpoint, BRBF-Es could be a viable alternative for EBFs. A comparative analysis was conducted on the design procedures and initial cost estimates of BRBF-Es and EBFs. Upon designing four 12-Story buildings (two BRBF-Es and two EBFs), it was determined that BRBF-Es were easier to design due to the statically determinant system. The initial costs estimates of BRBF-Es; however, ranged upwards of 30% more cost than EBFs. Therefore, the initial investment of more intensive structural engineering design …

Impact Of Constructing A Low Crested Weir In Cape Canaveral On Flushing In The Banana River, Atousa Saberi

Theses and Dissertations

The purpose of this study is to determine the extent to which constructing a low crested weir adjacent to Port Canaveral improves ushing in the Banana River. The Banana River is a 50 km long sub-basin of Indian River Lagoon (IRL), located between Cape Canaveral and Merritt Island in Brevard County. Although Port Canaveral locks connect the Banana River to the ocean, the locks remain closed when there are no passing vessels; therefore, it has limited circulation and a long ushing time. Declining water quality can be linked to recent high mortality events of di erent species living in the …

Construction Of An Initiated Chemical Vapor Deposition (Icvd) Reactor And Deposition Of Polytetrafluoroethylene (Ptfe) Thin Films Using Perfluoro-1-Octanesulfonyl Fluoride As The Initiator, Edgar Kiprop Kosgey

Graduate Theses/Dissertations

Initiated Chemical Vapor Deposition (iCVD) is a surface polymerization technique that is different from other traditional chemical vapor deposition (CVD) techniques. iCVD is carried under a vacuum without the use of solvents, therefore eliminating contaminations. An initiator and a monomer are metered into a vacuum reactor chamber. Inside the reaction chamber is an array of resistively heated filaments and a cooled substrate stage. Monomer species adsorb on to the cooled substrate surface underneath the filament array. The thermal energy from the resistively heated filaments breaks the bonds in the initiator molecule, generating free radicals. These generated free radicals chemisorb to …

Using Basic Quality Tools To Improve Production Yields And Product Quality In Manufacturing, Steve E. Black

Electronic Theses and Dissertations

As the U.S. and world economies emerge from years of recession, the hardwood flooring market is currently enjoying strong growth. With this growth come new challenges for hardwood flooring manufacturers. Strong competition from foreign markets and rising log prices are reducing product margins and forcing companies to think lean, while improving product quality.

QEP Wood Flooring division, who struggled through the worst of the U.S. economic down turn is now regaining ground as a strong competitor in the hardwood flooring market. This turnaround is due to internal changes to decrease waste and increase product quality. This is accomplished by using …

Power-Aware Planning And Design For Next Generation Wireless Networks, Chenfei Gao

Dissertations - ALL

Mobile network operators have witnessed a transition from being voice dominated to video/data domination, which leads to a dramatic traffic growth over the past decade. With the 4G wireless communication systems being deployed in the world most recently, the fifth generation (5G) mobile and wireless communica- tion technologies are emerging into research fields. The fast growing data traffic volume and dramatic expansion of network infrastructures will inevitably trigger tremendous escalation of energy consumption in wireless networks, which will re- sult in the increase of greenhouse gas emission and pose ever increasing urgency on the environmental protection and sustainable network development. …

Fundamentals Of Microlayer Evaporation And Its Role On Boiling Heat Transfer Enhancement, An Zou

Dissertations - ALL

Boiling, a dynamic and multiscale process, is widely used in industrial applications as it can transfer a large amount of heat over a small surface area. It has been studied for over five decades; however, a comprehensive understanding of the process is still lacking. The bubble ebullition cycle (nucleation, growth and departure) happens over a very short time-span (milliseconds) making it challenging to study the near-surface interfacial characteristics of a single bubble, which involves a microlayer. The microlayer is a thin film present at the bubble base and varies from nano-scale to micro-scale in thickness. The dynamics of the microlayer …

Structure, Dynamics And Rheology Of Polymer Solutions From Coarse-Grained Molecular Dynamics: Effects Of Polymer Concentration, Solvent Quality And Geometric Confinement, Yutian Yang

Dissertations - ALL

Understanding flow-microstructure interactions in macromolecular fluids is of great

importance in the design and optimization of ubiquitous polymer processing operations.

Further, such interactions are routinely encountered in separation of biopolymer mixtures

using gel electrophoresis and microfluidic technologies, manufacturing of polymer-based

functional nanocomposites and polymer-induced reduction in turbulent friction drag. To

date, the vast amount of theoretical/computational modeling efforts on flowmicrostructure

coupling has focused on continuum-level and stochastic descriptions.

Such approaches, while useful in qualitatively predicting polymer dynamics and rheology

in model systems, are incapable of describing the effects of polymer-solvent, polymerpolymer

and polymer-wall interactions. Further, in the context of polymer …

Synthesis And Functional Evaluation Of Peptide Modified Poly (Lactic-Co-Glycolic Acid) Nanoparticles To Inhibit Porphyromonas Gingivalis Biofilm Formation., Paridhi Kalia

Electronic Theses and Dissertations

Periodontal disease is an oral inflammatory disorder that afflicts roughly 46% of the adults in the U.S. Currently, treatment of periodontal disease involves the removal of plaque from the gingival pocket (with possible antibiotic treatment) and if necessary, gingival surgery. To our knowledge, no therapeutic approach exists that promotes host-biofilm homeostasis by limiting pathogen recolonization of the oral cavity after prophylaxis or treatment. The interaction of the pathogen Porphyromonas gingivalis with commensal streptococci is critical for initiation of periodontitis and represents a target for limiting P. gingivalis colonization of the oral cavity. Previous studies showed that a synthetic peptide …

Predicted Stresses In A Ball-Grid-Array (Bga)/Column-Grid-Array (Cga) Assembly With A Low Modulus Solder At Its Ends, Ephraim Suhir, Reza Ghaffarian

Mechanical and Materials Engineering Faculty Publications and Presentations

A simple, easy-to-use and physically meaningful predictive model is suggested for the assessment of thermal stresses in a ball-grid-array or a column-grid-array with a low modulus solder material at the peripheral portions of the assembly. It is shown that the application of such a design can lead to a considerable relief in the interfacial stresses, even to an extent that inelastic strains in the solder joints could be avoided. If this happens, the fatigue strength of the bond and of the assembly as a whole will be improved dramatically: low-cycle fatigue conditions will be replaced by the elastic fatigue condition, …

Integrating Freight Into Livable Communities, Kristine M. Williams, Alexandria Carroll

TREC Final Reports

Where livability is a goal of the planning process, freight runs the risk of not being considered except as an afterthought or as something to be excluded. Yet, freight is an integral part of local economic development. Because economic prosperity is a key characteristic of livable communities, freight must be incorporated into the planning process. This study explores the relationship between freight and livability through a comprehensive literature review and case study research. The final report includes a menu of strategies and case study perspectives that highlight the importance of transportation and land use integration, interagency coordination, and context-sensitivity in …

Effect Of Ni On The Formability And Texture Of Hot Rolled Weathering Steel, Gadadhar Sahoo, I. S. Wani, S. B. Kumar, Balbir Singh, Atul Saxena, R. Basu

Journal of Metals, Materials and Minerals

Formability behavior in two grades of hot rolled low carbon weathering steel with varying nickel content i.e., SCR 1 (Fe-0.116P-0.018Ni) and SCR 2 (Fe-0.115P-0.34Ni), have been evaluated in relationship to microstructure, EBSD estimated orientation distribution function (ODF), special boundary nature, mechanical properties and formability parameters like tensile stain hardening exponent (n) and plastic anisotropy ratio (r). The alloy sample SCR 1 exhibited improved formability characteristics in terms of stain hardening exponent (n) and plastic anisotropy ratio (r). This was mainly attributed to relatively higher fraction of the ND//<111> orientation or the ? fibre texture component and increased presence of sigma …

Enhanced-Resolution Processing And Applications Of The Ascat Scatterometer, Richard D. Lindsley

Theses and Dissertations

The ASCAT scatterometer measures the Earth surface microwave radar backscatter in order to estimate the near-surface winds over the oceans. While the spatial resolution of the conventional applications is sufficient for many purposes, other geoscience applications benefit from an improved spatial resolution. Specialized algorithms may be applied to the scatterometer data in order to reconstruct the radar backscatter on a high-resolution grid. Image reconstruction requires the spatial response function (SRF) of each measurement, which is not reported with the measurement data. To address this need, I precisely model the SRF incorporating (1) the antenna beam response, (2) the processing performed …

Characterizing The Effects Of Capillary Flow During Liquid Composite Molding, Michael Ray Morgan

Theses and Dissertations

As the aerospace industry continues to incorporate composites into its aircraft, there will be a need for alternative solutions to the current autoclaving process. Liquid composite molding (LCM) has proven to be a promising alternative, producing parts at faster rates and reduced costs while retaining aerospace grade quality. The most important factor of LCM is controlling the resin flow throughout the fiber reinforcement during infusion, as incomplete filling of fibers is a major quality issue as it results in dry spots or voids. Void formation occurs at the resin flow front due to competition between viscous forces and capillary pressure. …

Galvanic Corrosion Of Magnesium Coupled To Steel At High Cathode-To-Anode Area Ratios, Dila Ram Banjade

Theses and Dissertations

In this study, the impact of galvanic coupling of magnesium to steel on the corrosion rate, surface morphology, and surface film formation was investigated. In particular, the role of self-corrosion was quantified as previous studies showed discrepancies between model predictions and experimental results that were likely due to significant self-corrosion. This experimental study examined the corrosion of Mg coupled to steel in 5 wt% NaCl at cathode-to-anode area ratios that ranged from 5 to 27. Results showed that self-corrosion was significant and accounted for, on average, one-third of total corrosion. Moreover, self-corrosion varied with time and cathode size, and was …

An Approach To Model Plastic Deformation Of Metallic Plates In Hypervelocity Impact Experiments, Shawoon Kumar Roy

UNLV Theses, Dissertations, Professional Papers, and Capstones

Space structures are subjected to micro-meteorite impact at extremely high velocities of several kilometers per second. Similarly, design of military equipment requires understanding of material behavior under extremely high pressure and temperature. Study of material behavior under hypervelocity impact (HVI) poses many challenges since few researchers so far have approached this problem. Material models, equations of the state, and fracture mechanics are not well understood under these conditions.

The objective of this research is to present an approach for studying plastic deformation of metallic plates under HVI conditions. A two-stage light gas gun can be used to simulate these conditions …

A Multi-~Procedural Approach To Evaluating Walkability And Pedestrian Safety, Peris Nyagah

UNLV Theses, Dissertations, Professional Papers, and Capstones

Walking has sound health benefits and tends to be a pleasurable experience requiring no fuel, fare, license, nor registration. Whilst walking is recommended as part of physical activity, it is necessary to provide a conducive and safe walking environment. In an effort to determine an optimum combination of infrastructure that would create walkable, transit-oriented neighborhoods eliminating unnecessary motorized trips; various approaches evaluating an assortment of features in the walking environment have been implemented. However, some factors such as crash risk which have an essential contribution to the suitability of the walking environment have yet to be considered. Therefore the objective …

Crystalline Phase Change In Steel Alloys Due To High Speed Impact, Muna Slewa

UNLV Theses, Dissertations, Professional Papers, and Capstones

The effect of hypervelocity projectile impact on the crystalline grain structure near the target impact location of A36 steel has been studied. A36 steel is a mostly single phase body centered cubic material (BCC). Impact velocities ranged from 3.54 to 6.70 km/sec. Target materials were studied before and after impact to determine if these impact conditions result in a phase change of the A36. Scanning electron microscopy, electron back-scatter diffraction, and x-ray diffraction methods were used to investigate deformation, lattice defects, twinning, and phase transformation. A limited number of impacted targets made from 304L and HY100 steels were also examined. …

Computational Capacity And Energy Consumption Of Complex Resistive Switch Networks, Jens Bürger, Alireza Goudarzi, Darko Stefanovic, Christof Teuscher

Electrical and Computer Engineering Faculty Publications and Presentations

Resistive switches are a class of emerging nanoelectronics devices that exhibit a wide variety of switching characteristics closely resembling behaviors of biological synapses. Assembled into random networks, such resistive switches produce emerging behaviors far more complex than that of individual devices. This was previously demonstrated in simulations that exploit information processing within these random networks to solve tasks that require nonlinear computation as well as memory. Physical assemblies of such networks manifest complex spatial structures and basic processing capabilities often related to biologically-inspired computing. We model and simulate random resistive switch networks and analyze their computational capacities. We provide a …

Face Recognition With Multi-Stage Matching Algorithms, Xianming Chen

Dissertations

For every face recognition method, the primary goal is to achieve higher recognition accuracy and spend less computational costs. However, as the gallery size increases, especially when one probe image corresponds to only one training image, face recognition becomes more and more challenging. First, a larger gallery size requires more computational costs and memory usage. Meanwhile, that the large gallery sizes degrade the recognition accuracy becomes an even more significant problem to be solved.

A coarse parallel algorithm that equally divides training images and probe images into multiple processors is proposed to deal with the large computational costs and huge …

Update Of Data For Estimating Esals, Jerry G. Pigman, R. Clark Graves, Brad W. Rister, David H. Cain, Neil Tollner

Kentucky Transportation Center Research Report

This project involved updating processing traffic characteristics data using a series of quality control and analytical programs to produce an estimate of the following parameters of interest; 1) average daily traffic, 2) percent trucks, 3) percent trucks classified as heavy/coal, 4) axles per truck, 5) axles per heavy/coal truck, 6) ESALs per truck axle, 7) ESALs per heavy/coal truck axle, and 8) total ESALs. ESAL estimation parameters used WIM data collected during 2007, 2011, and 2012–2013 (representing 41 stations); and classification data collected in 2010, 2011 and 2012 (representing 1,669 stations).

Computer programs used to process classification data, process weight …

Degradation Of Organic Pollutants And Microorganisms From Wastewater Using Different Dielectric Barrier Discharge Configurations—A Critical Review, Emile S.Massima Mouele, Jimoh O. Tijani, Ojo O. Fatoba, Leslie F. Petrik

Mining Engineering Faculty Research & Creative Works

The growing global drinking water crisis requires the development of novel advanced, sustainable, and cost-effective water treatment technologies to supplement the existing conventional methods. One such technology is advanced oxidation based on dielectric barrier discharge (DBD). DBD such as single and double planar and single and double cylindrical dielectric barrier configurations have been utilized for efficient degradation of recalcitrant organic pollutants. The overall performance of the different DBD system varies and depends on several factors. Therefore, this review was compiled to give an overview of different DBD configurations vis-a-viz their applications and the in-situ mechanism of generation of free reactive …

Biochar From Pyrolysis Of Biosolids For Nutrient Adsorption And Turfgrass Cultivation, Daniel Elliott Carey, Patrick J. Mcnamara, Daniel Zitomer

Civil and Environmental Engineering Faculty Research and Publications

At water resource recovery facilities, nutrient removal is often required and energy recovery is an ever-increasing goal. Pyrolysis may be a sustainable process for handling wastewater biosolids because energy can be recovered in the py-gas and py-oil. Additionally, the biochar produced has value as a soil conditioner. The objective of this work was to determine if biochar could be used to adsorb ammonia from biosolids filtrate and subsequently be applied as a soil conditioner to improve grass growth. The maximum carrying capacity of base modified biochar for NH₃−N was 5.3 mg/g. Biochar containing adsorbed ammonium and potassium was …

Ecohydrological Controls On Grass And Shrub Above-Ground Net Primary Productivity In A Seasonally Dry Climate, Anthony J. Parolari, Michael L. Goulden, Rafael L. Bras

Civil and Environmental Engineering Faculty Research and Publications

Seasonally dry, water‐limited regions are often co‐dominated by distinct herbaceous and woody plant communities with contrasting ecohydrological properties. We investigated the shape of the above‐ground net primary productivity (ANPP) response to annual precipitation (P_a) for adjacent grassland and shrubland ecosystems in Southern California, with the goal of understanding the role of these ecohydrological properties on ecosystem function. Our synthesis of observations and modelling demonstrates grassland and shrubland exhibit distinct ANPP‐P_a responses that correspond with characteristics of the long‐term P_a distribution and mean water balance fluxes. For annual grassland, no ANPP occurs below a ‘precipitation …

Increased Lower Limb Spasticity But Not Strength Or Function Following A Single-Dose Serotonin Reuptake Inhibitor In Chronic Stroke, Krishnaj Gourab, Brian D. Schmit, T. George Hornby

Biomedical Engineering Faculty Research and Publications

Objective: To investigate the effects of single doses of a selective serotonin reuptake inhibitor (SSRI) on lower limb voluntary and reflex function in individuals with chronic stroke.

Design: Double-blind, randomized, placebo-controlled crossover trial.

Setting: Outpatient research setting.

Participants: Individuals (N=10; 7 men; mean age ± SD, 57±10y) with poststroke hemiplegia of >1 year duration who completed all assessments.

Interventions: Patients were assessed before and 5 hours after single-dose, overencapsulated 10-mg doses of escitalopram (SSRI) or placebo, with 1 week between conditions.

Main Outcome Measures: Primary assessments included maximal ankle and knee isometric strength, and velocity-dependent (30°/s–120°/s) plantarflexor stretch reflexes under …

Retinal Architecture In ​Rgs9- And ​R9ap-Associated Retinal Dysfunction (Bradyopsia), Rupert W. Strauss, Adam M. Dubis, Robert F. Cooper, Rola Ba-Abbad, Anthony T. Moore, Andrew R. Webster, Alfredo Dubra, Joseph Carroll, Michel Michaelides

Biomedical Engineering Faculty Research and Publications

Purpose

To characterize photoreceptor structure and mosaic integrity in subjects with RGS9- and R9AP-associated retinal dysfunction (bradyopsia) and compare to previous observations in other cone dysfunction disorders such as oligocone trichromacy.

Design

Observational case series.

Methods

setting: Moorfields Eye Hospital (United Kingdom) and Medical College Wisconsin (USA). study population: Six eyes of 3 subjects with disease-causing variants in RGS9 or R9AP. main outcome measures: Detailed retinal imaging using spectral-domain optical coherence tomography and confocal adaptive-optics scanning light ophthalmoscopy.

Results

Cone density at 100 μm from foveal center ranged from 123 132 cones/mm²to 140 013 cones/mm^{2 …}

Cormant Cs-Edis, Steven Jarred Stelfox

Computer Science and Software Engineering

No abstract provided.

Free2play, Corey Lee Wilson

Computer Engineering

Free2Play is a website based upon the wildly popular PC video game League of Legends created by Riot Gaming. The website contains helpful information for new and old players of the game, such as articles containing the latest League of Legends new, a rune calculator, and recommended item builds for characters. The website uses HTML5, jquery, node.js, MySQL, and PHP to pull data from Riot’s web API and Champion.gg’s website.

Bep: Bit Error Pattern Measurement And Analysis In Ieee 802.11, Jiayue Li, Zimu Zhou, Chen Zhang, Liang Yin, Lionel M. Ni

Research Collection School Of Computing and Information Systems

The IEEE 802.11 is a set of Media Access Control (MAC) and Physical Layer (PHY) specifications which concern the Wireless Local Area Network (WLAN) service. However, most IEEE 802.11 WLAN services are easily affected by external elements, such as the homogeneous interference caused by the high-density deployment of IEEE 802.11 devices, the attenuation effect caused by complicated indoor obstacles, and the heterogeneous interference caused by other devices which operate out of unlicensed 2.4GHz ISM bands. In this paper, we first present a method to capture IEEE 802.11n Bit Error Patterns (BEP) under the network effect such as the homogeneous interference …

Adaptive Scaling Of Cluster Boundaries For Large-Scale Social Media Data Clustering, Lei Meng, Ah-Hwee Tan, Donald C. Wunsch

Research Collection School Of Computing and Information Systems

The large scale and complex nature of social media data raises the need to scale clustering techniques to big data and make them capable of automatically identifying data clusters with few empirical settings. In this paper, we present our investigation and three algorithms based on the fuzzy adaptive resonance theory (Fuzzy ART) that have linear computational complexity, use a single parameter, i.e., the vigilance parameter to identify data clusters, and are robust to modest parameter settings. The contribution of this paper lies in two aspects. First, we theoretically demonstrate how complement coding, commonly known as a normalization method, changes the …

Adaptive Duty Cycling In Sensor Networks With Energy Harvesting Using Continuous-Time Markov Chain And Fluid Models, Ronald Wai Hong Chan, Pengfei Zhang, Ido Nevat, Sai Ganesh Nagarajan, Alvin Cerdena Valera, Hwee Xian Tan

Research Collection School Of Computing and Information Systems

The dynamic and unpredictable nature of energy harvesting sources available for wireless sensor networks, and the time variation in network statistics like packet transmission rates and link qualities, necessitate the use of adaptive duty cycling techniques. Such adaptive control allows sensor nodes to achieve long-run energy neutrality, where energy supply and demand are balanced in a dynamic environment such that the nodes function continuously. In this paper, we develop a new framework enabling an adaptive duty cycling scheme for sensor networks that takes into account the node battery level, ambient energy that can be harvested, and application-level QoS requirements. We …