Engineering Commons^™

Indoor Environmental Quality (Ieq) And Building Energy Optimization Through Model Predictive Control (Mpc), Korbaga Fantu Woldekidan

Dissertations - ALL

This dissertation aims at developing a novel and systematic approach to apply Model Predictive Control (MPC) to improve energy efficiency and indoor environmental quality in office buildings. Model predictive control is one of the advanced optimal control approaches that use models to predict the behavior of the process beyond the current time to optimize the system operation at the present time. In building system, MPC helps to exploit buildings’ thermal storage capacity and to use the information on future disturbances like weather and internal heat gains to estimate optimal control inputs ahead of time.

In this research the major challenges …

Experimental Investigation Of Spatial-Mode-Selective Frequency Up-Conversion, Mohan Giribabu

Electrical Engineering Theses - Archive

We experimentally investigate the spatial-mode-selective frequency up-conversion by sum-frequency generation in a second-order medium. In particular, we are interested in zero and first order Gaussian modes. In our experiment, we generate pump and signal pulses of 400 ps duration, spatially modulate them, and couple them into a Periodically Poled Lithium Niobate (PPLN) waveguide. Only one signal mode selected by the pump’s spatial profile is up-converted. The up-converted signal is separated from the original signal and pump beams, modes are captured on a camera and efficiency of up-conversion is recorded. We also discuss some important phase-matching conditions for nonlinear interaction in …

Investigation Of Scalable Hevc And Its Bitrate Allocation For Uhd Deployment In The Context Of Http Streaming, Uma Sagar Madhugiri Dayananda

Electrical Engineering Theses - Archive

High Efficiency Video Coding (HEVC/H.265) [1] is the state of the art video compression standard, which provides bitrate reduction in the range of 50% when compared to the previous Advanced Video Coding (AVC/H.264) [5] standard at similar video quality. Scalable High Efficiency Video Coding (SHVC) [2] is the scalable extension of HEVC, which provides traditional scalability options in terms of quality, spatial resolution and temporal frame rate and newer scalability options as well. SHVC can be used to deliver Ultra High Definition (UHD) or 4K resolution video content to mix of clients having varying characteristics. The distribution of clients is …

Final Project Report: Heliostat-Concentrator Solar Cooker, Ian Davison, Devin Mast

Mechanical Engineering

This document is the full report for the senior project of Cal Poly Mechanical Engineering students Ian Davison and Devin Mast. The report encompasses the full project process, including background research, identification of need, design requirements, design development, proposed design, design realization, changes to proposed design, and design verification. We were tasked with the design and manufacture of a “dual mirror” solar cooker to verify a concept for a new type of off-axis parabolic solar cooker conceived by Dr. Pete Schwartz, the sponsor of the senior project and a physics professor at Cal Poly. Previously, off-axis parabolic solar cookers have …

Formulation And Evaluation Of Soy Polymer Based, Gravure Printed Resistive Inks For Applications In Printed Electronics, Bhushan Hiralal Patil

Masters Theses

Today, the majority of the commercially available conductive inks are formulated using expensive metallic particles, such as silver and gold. Most of the inks use volatile solvents in the formulation, which are hazardous to the environment as emission of VOCs is the major concern. In the case of water-based inks, usually petroleum-based acrylic polymers are used. Apart from being nonrenewable raw materials, acrylic polymers are carcinogenic in nature. Also, acrylic polymers are used in a variety of applications, such as the automotive, medical device, paint, and adhesive industries. Often times, the ink industry has to compete with other industries for …

A Feed Forward Circuit For Jitter Attenuation On High-Speed Digital Signals, Eric Rule

Electrical Engineering

In the age of high-speed digital circuitry, there exists a need for clean, precise clock signals. In generating and distributing clock signals throughout a circuit, unwanted jitter can become a serious issue. A common technique for attenuating jitter uses phase-locked-loops to treat the signal, but as the clock frequency increases, so does the cost and complexity of the designs. Following the research completed by Dr. Tina Smilkstein [1], this project examines a purely feed-forward technique for attenuating jitter that is low-complexity and robust, and aims to design an integrated circuit that implements the technique.

Development Of A Set Of Force Response Equations To Represent The Musculature In Infants To Study Development Dysplasia Of The Hip, Brendan Jones

HIM 1990-2015

This paper describes how a force response equation was created to model muscles, tendons, and ligaments of the hip joint to improve a biomechanical model of an infant hip to study Developmental Dysplasia of the Hip (DDH). DDH is the most common abnormality in newborn infants and is defined as any amount of instability in the hip including complete dislocation. Researchers at our institution are attempting to increase the success rate of treatment methods by creating computer models of the biomechanics of infant hip instability and dislocation. The computer model used a scaled adult pelvis, femur, tibia, fibula and foot …

Design Of A Physical Windkessel Model For Use In Lvad In-Vitro Benchtop Modeling, Kyle W. Beggs

HIM 1990-2015

Despite improved life expectancy compared to medical management alone, Ventricular Assist Device (VAD) recipients show survival rates of 80% at 12 months and 70% at 24 months. A large portion of VAD-associated mortality results from increased risk of stroke with an event frequency reported between 14-47%. Recent concerns have been raised about unprecedented increases of thrombus formation in VAD recipients with subsequent reports pointing towards implantation techniques as a critical contributor to these events. Thus, the overall prognosis with mechanical support can improve by advancing the surgeon’s approach to VAD implantation. Previous studies using Computational Fluid Dynamics (CFD) were aimed …

Effects Of Binary Solvent System On Morphology Of Particles, Patrick Besana

HIM 1990-2015

Recent advancements in cancer research has led to the synthesis of a new drug known as docetaxel. Meant to replace paclitaxel, its more natural counterpart whose ingredients are difficult to obtain, the drug is known to effectively treat a wide array of cancers, including breast cancer, ovarian cancer, and prostate cancer. The establishment of a synthetic alternative to paclitaxel has increased its bioavailability, thereby lowering the cost needed to utilize the drug. Still, the limiting factor in minimizing costs is the method in which the drug is processed. Current methods in drug processing have their limitations, which include the introduction …

The Prediction Predicament, William "Ike" Eisenhauer

Engineering and Technology Management Faculty Publications and Presentations

The article focuses on the prediction of predicament in terms of forecasting at industrial engineering level. Topics discussed include business optimize resources via forecasting; audience who cannot comprehend the methodology used for forecasting in healthcare operations; and use of forecasting for performance measurement.

Comments On “The Principal Axes Decomposition Of Spatial Stiffness Matrices”, Shuguang Huang, Joseph M. Schimmels

Mechanical Engineering Faculty Research and Publications

A significant amount of research has been directed toward developing a more intuitive appreciation of spatial elastic behavior. Results of these analyses have been described in terms of behavior decompositions and in terms of behavior centers. In a recent paper entitled “The Principal Axes Decomposition of Spatial Stiffness Matrices” by Chen et al. (IEEE Trans. Robot., vol. 31, no. 1, pp. 191-207), a decomposition of spatial stiffness was presented, and centers of stiffness and compliance were identified. The results presented in the paper have substantial overlap with previously published results and redefine previously used terms. The objective of this communication …

A Low Complexity Reweighted Proportionate Affine Projection Algorithm With Memory And Row Action Projection, Jianming Liu, Steven L. Grant, Jacob Benesty

Electrical and Computer Engineering Faculty Research & Creative Works

A new reweighted proportionate affine projection algorithm (RPAPA) with memory and row action projection (MRAP) is proposed in this paper. The reweighted PAPA is derived from a family of sparseness measures, which demonstrate performance similar to mu-law and the l0 norm PAPA but with lower computational complexity. The sparseness of the channel is taken into account to improve the performance for dispersive system identification. Meanwhile, the memory of the filter's coefficients is combined with row action projections (RAP) to significantly reduce computational complexity. Simulation results demonstrate that the proposed RPAPA MRAP algorithm outperforms both the affine projection algorithm (APA) and …

An Overview On Optimized Nlms Algorithms For Acoustic Echo Cancellation, Constantin Paleologu, Silviu Ciochină, Jacob Benesty, Steven L. Grant

Electrical and Computer Engineering Faculty Research & Creative Works

Acoustic echo cancellation represents one of the most challenging system identification problems. The most used adaptive filter in this application is the popular normalized least mean square (NLMS) algorithm, which has to address the classical compromise between fast convergence/tracking and low mis adjustment. In order to meet these conflicting requirements, the step-size of this algorithm needs to be controlled. Inspired by the pioneering work of Prof. E. Hänsler and his collaborators on this fundamental topic, we present in this paper several solutions to control the adaptation of the NLMS adaptive filter. The developed algorithms are "non-parametric" in nature, i.e., they …

Performance Analysis Of Hybrid Algorithms For Lossless Compression Of Climate Data, Bharath Chandra Mummadisetty

UNLV Theses, Dissertations, Professional Papers, and Capstones

Climate data is very important and at the same time, voluminous. Every minute a new entry is recorded for different climate parameters in climate databases around the world. Given the explosive growth of data that needs to be transmitted and stored, there is a necessity to focus on developing better transmission and storage technologies. Data compression is known to be a viable and effective solution to reduce bandwidth and storage requirements of bulk data. So, the goal is to develop the best compression methods for climate data.

The methodology used is based on predictive analysis. The focus is to implement …

Alkali-~Activated Fly Ash Binders: Feasibility As A Sustainable Alternative To Ordinary Portland Cement For Pre-~Cast Systems, Kimberly Sierra

UNLV Theses, Dissertations, Professional Papers, and Capstones

Fresh, load-dependent, transport, and durability properties of alkali-activated fly ash mortars were studied. The influences of activator concentration, solution-to-binder ratio, curing condition, activator type, and sodium silicate-to-total solution ratio on the properties of the studied alkali-activated mortars were examined. This study was divided in two phases. The first phase dealt with the use of sodium hydroxide as the sole activator. The second phase of the study was divided into two parts, both of which used a combination of sodium hydroxide and sodium silicate as the activator solution. Part I of phase II used elevated temperature curing conditions, whereas part II …

Dual-Input Dc-To-Dc Converter Topologies And Control Schemes, Shaun Alan Stickel

Boise State University Theses and Dissertations

Dual-input DC-to-DC converters are power supplies that draw power from two sources simultaneously and deliver power to a single load, the ratio of power drawn from each source and be held constant with changes in the load. Applications for dual-input power supplies are computer systems, mobile systems using energy harvesting, and systems needing redundant power supplies. This writing covers the operation and control of dual-input DC-to-DC converters that implement a non-inverting buck-boost function and utilize only a single power path.

Traditionally, a dual-input power supply is created by placing two standard power paths in parallel. This adds considerable control complexity …

Estimation On Gibbs Entropy For An Ensemble, Lekhya Sai Sake

Electronic Theses, Projects, and Dissertations

In this world of growing technology, any small improvement in the present scenario would create a revolution. One of the popular revolutions in the computer science field is parallel computing. A single parallel execution is not sufficient to see its non-deterministic features, as same execution with the same data at different time would end up with a different path. In order to see how non deterministic a parallel execution can extend up to, creates the need of the ensemble of executions. This project implements a program to estimate the Gibbs Entropy for an ensemble of parallel executions. The goal is …

A Game-Based Learning Model, Fatmah Mohamed Ali Ramsi

Theses

The purpose of this research is to design a conceptual model and develop an implementation as a proof of concept of game-based learning (GBL)to support linguistic skills acquisition. Our model lays the foundations of game-based learning by defining methods, processes, and procedures to support the development of game-based learning systems. Integration of learning and gameplay raises various issues, among them the learning process, learning content, and game characteristics. Language competency is fundamental to academic and social success. Vocabulary acquisition is a primary basis for language competency. Word lists and dictionaries have been used as a resource to enrich vocabulary. The …

Molecular Dynamics Simulation Of Force-Controlled Nanoindentation, Keaton Jaramillo

Mechanical Engineering Undergraduate Honors Theses

The aim of this honors research is to develop a force-controlled nanoindentation algorithm for molecular dynamics simulation. The algorithm was tested on Silicon using the Tersoff potential and Gold using the Embedded-Atom Method (EAM) potential. The effect of varying the damping parameters that adjust the system pressure and changing run length between force iterations is explored. The force-controlled algorithm was developed and shown to be working by correlating pop-in events shown in the force versus displacement (P-h) curves to visualization software showing phase transformation or dislocation events in the sample.

Use Of Personality Profile Assessments In The Construction Industry, Brian Richard Childs

Theses and Dissertations

Various industries are using personality profile assessments as tools to help reduce employee turnover. Employee turnover is a continuing challenge in the construction industry that has negative effects on construction companies. Research found that it was difficult to know if companies in the construction industry are using personality profile assessments as a tool to help reduce employee turnover. After understanding that other industries were using personality profile assessments in their hiring, promoting, team building and leadership development to reduce turnover, it was desired to understand if the construction industry was doing the same. This research performed a survey among the …

A Pilot Study To Determine The Performance Of Tension Lap Splices In Reinforced Masonry Made With Light-Weight Grout, Brandon Richard Corbett

Theses and Dissertations

The use of light-weight building materials in modern construction has resulted in efficient designs and considerable cost savings by reducing structural weight and supporting sections. This has only been possible because of many years of research to better understand the properties of the light-weight material, and its structural behaviors. However, light-weight grout is a relatively new building material in reinforced masonry construction and little is known about its structural properties. The main objective of this study was to determine if the use of light-weight grout would impact the performance of reinforcing steel, specifically development length, in masonry construction.The research included …

Rubidium Packaging For On-Chip Spectroscopy, Cameron Louis Hill

Theses and Dissertations

This thesis presents rubidium packaging methods for integration using anti-resonant reflecting optical waveguides (ARROWs) on a planar chip. The atomic vapor ARROW confines light through rubidium vapor, increases the light-vapor interaction length, decreases the size of the atomic cell to chip scales, and opens up possibilities for waveguide systems on chips for additional optoelectronic devices. Rubidium vapor packaging for long-life times are essential for realizing feasibly useful devices. Considerations of outgassing, leaking and chemical compatibilities of materials in rubidium vapor cells lead to an all-metal design. The effect of these characteristics on the rubidium D2 line spectra is considered.

Springback Force Considerations In Compliant Haptic Interfaces, Dallin R. Swiss

Theses and Dissertations

This thesis investigates the potential benefits and challenges of using compliant mechanisms in the design of haptic interfaces. The benefits and challenges are presented with an emphasis on their inherent springback behavior and an active compensation approach. Design criteria for compliant mechanism joint candidates are reviewed and several joints are surveyed. Quantitative calculations of axial stiffness and maximum stress for five candidates are presented. Generalized analytical models of springback force and compensation torque are created to simulate the implementation of each joint candidate in a two degree-of-freedom planar pantograph. We use these models in the development and discussion of an …

Elucidating The Mechanisms Of Rate-Dependent Deformation At Ambient Temperatures In A Model Metallic Glass, Matthew Bradley Harris

Theses and Dissertations

In this work, the Shear Transformation Zone (STZ) dynamics model is adapted to capture the transitions between different regimes of flow serration in the deformation map of metallic glass. This was accomplished by scaling the STZ volume with a log-linear fit to the strain rate, and also adjusting the activation energy of an STZ with a log-linear fit to maintain constant yield strength at differing strain rates. Twelve simulations are run at each of six different strain rates ranging from 10^-5 to 10⁰ s^-1, and statistics are collected on simulation behavior and shear band nucleation and …

Effects Of Various Mobility Aids On Lower-Extremity Muscle Activity, Michael Ryan Sanders

Theses and Dissertations

Millions of people each year spend some portion of their time using mobility aids to facilitate periods of non-weight bearing ambulation. The use of these devices changes the loading conditions of the lower extremities, which may result in skeletal muscle adaptations. The purpose of this work was to evaluate the effects of 3 types of mobility aids on lower-extremity muscle activity. Evaluation was based on 1) measured muscle activation signals using electromyography (EMG), and 2) measured joint kinematics and ground reaction forces, which were used to predict muscle forces. 16 healthy subjects (7 female, 9 male), ages 18-27 participated in …

Underwater Rope Fatigue Testing Machine, Napoleon Nino, Andrew Pimentel

Mechanical Engineering

The design and fabrication of an underwater rope fatigue testing machine meant to simulate the effects of an oceanic environment and the effects on rope.

Thermal Hydraulic Turbine Dynamometer, Ryan Baskett, Alexander Campbell, Andrew Puntorno-Carlberg

Mechanical Engineering

No abstract provided.

Child Carrier: Senior Project, Cordell Hollingsworth, Jacob Puppo, Drew Sapp

Mechanical Engineering

No abstract provided.

The Effect Of Neurostimulation On Ischemic Pain And Methods Of Assessing Pain, Kaylee Keck

Biomedical Engineering

Peripheral arterial disease (PAD) impacts approximately eight million people in the United States [1]. Disease progression leads to chronic ischemic pain, hindering quality of life. Pharmaceuticals are a typical treatment for pain associated with PAD; but as few as 30% of patients have a significant reduction of pain (≥50%) [2].

Neurostimulation is commonly used as a treatment for various diseases and injuries, including Parkinson’s disease and sports-related back and knee injuries [2]. The objective of the study was to explore neurostimulation and its effect on pain and paresthesia for a model of acute peripheral ischemia in young college students.

Pain …

Comprehensive Neural Network Forecasting System For Ground Level Ozone In Multiple Regions, Gautam Raghavendra Eapi

Civil Engineering Dissertations - Archive

A comprehensive neural network daily maximum 8 hour-ozone forecasting model was developed based on five years of data (2010-2014) collected from 50 monitoring sites from the Dallas Fort Worth, Houston-Galveston-Brazoria, Los Angeles, San Joaquin and San Diego regions. This work represents the first neural network developed to forecast ozone in multiple regions, as well as multiple sites in the same region. Previous studies have developed separate neural network models to forecast ozone at each location. Two stages of feature selection were applied to reduce input vector dimension and redundancy. These are Piecewise Linear Orthonormal Floating Search (PLOFS), and Karhunen - …