Engineering Commons^™

Test 2156: New Holland Ts6.110, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2155: Kubota M6-141, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2153: Kubota M6-111, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2149a: Case Ih Magnum 340 Rowtrac, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2150: Case Ih Magnum 380 Rowtrac, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2164a: New Holland T9.700, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2159a: Case Ih Farmall 140a, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Numerical Model Water Quality For Hidalgo County, Texas; Main Drainage System, Jose Orvyl Gonzalez, Grimaldo Carrillo, Jungseok Ho

Civil Engineering Faculty Publications

Increasing urbanization, water intake, and human water interaction of drainage canals of the Hidalgo County watershed seals the drainage basin and expands floodplains along the canal-side. Incremental use of drainage systems affects the amounts of nutrients that can cause an exposure to residues of agriculture chemicals, water related parasitic diseases, and fecal diseases. Proper water quality management is crucial for pollutant transport detection, estimation of non-point source discharge, and prediction of pollutant discharge at water endpoints. This research seeks to improve the understanding stormwater quality and quantity that is influenced by the frequency of human-water contacts and associated with treatment …

Resonant Inductive Coupling As A Potential Means For Wireless Power Transfer To Printed Spiral Coil, Mohammad Haerinia, Ebrahim S. Afjei

Electrical Engineering Student Publications

This paper proposes an inductive coupled wireless power transfer system that analyses the relationship between induced voltage and distance of resonating inductance in a printed circuit spiral coils. The resonant frequency produced by the circuit model of the proposed receiving and transmitting coils are analysed by simulation and laboratory experiment. The outcome of the two results are compared to verify the validity of the proposed inductive coupling system. Experimental measurements are consistent with simulations over a range of frequencies spanning the resonance.

An Integrated Completion And Reservoir Modeling Methodology For Horizontal Shale Wells: A Montney Formation Example, Rashid S. Kassim, Larry K. Britt, Shari Dunn-Norman, Bryan Lang

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The Montney Formation is one of the largest unconventional resources in North America covering from southwestern Alberta to northeast British Columbia. The Montney Formation has natural gas, natural gas liquids (NGL) and oil from conventional and unconventional reservoirs. The first multiple fractured horizontal well (MFHW) was drilled in 2005. However, since the first MFHW, different methods were proposed to optimize completion designs in the Montney Formation. Some of the optimized completions utilized the "operational effectiveness" of high-rate slick-water fracture designs while other designs utilized energized fracturing fluids. What has been missing was an integrated methodology that utilizes all available data …

Modeling Gas Inflow For Extremely Low Permeability Shale Using Cfd, Chatetha Chumkratoke

Doctoral Dissertations

"Computational fluid dynamics (CFD) has been used to model 2-D well inflow over a range of permeabilities to study the impact of various well completion strategies (Augustine, 2011). Augustine's 2-D model was subsequently extended for 3-D flow by Thepporprapakorn (2013), for gas flow in the permeability range of tight gas (0.01 mD).

This work presents a 3-D CFD model of gas inflow valid for extremely low ranges of permeability (0.00001 mD). In extremely low permeability, gas flow is complex and includes flow from fractures, flow through porous media, and diffusive gas transport. Diffusive gas transport is important when strong density …

Accident-Precipitating Factors For Crashes In Turbine-Powered General Aviation Aircraft, Douglas Boyd, Alan Stolzer

Publications

General aviation (14CFR Part 91) accounts for 83% of civil aviation fatalities. While much research has focused on accident causes/pilot demographics in this aviation sector, studies to identify factors leading up to the crash (accident-precipitating factors) are few. Such information could inform on pre-emptive remedial action. With this in mind and considering the paucity of research on turbine-powered aircraft accidents the study objectives were to identify accident-precipitating factors and determine if the accident rate has changed over time for such aircraft operating under 14CFR Part 91.

The NTSB Access database was queried for accidents in airplanes (

The “Checklist/Flight Manual …

What Are The Predictors Of System-Wide Trust Loss In Transportation Automation?, Stephen Rice, Scott R. Winter, John E. Deaton, Ismael Cremer

Publications

Prior research has examined how individuals place trust in single (e.g., Meyer, 2001, 2004) and multiple (e.g., Geels-Blair, Rice, & Schwark, 2013) automated devices when one fails. This has shown that participants are influenced by system-wide trust (SWT). What has been missing is an investigation into what types of people succumb to SWT effects. The current study attempts to replicate SWT findings and identify possible predictors of individuals likely to be influenced by SWT. The findings did demonstrate a replication of SWT. The study found that ‘‘feelings of negativity when automated devices fail’’ was a significant predictor of SWT theory.

Antibacterial Properties Of Poly (Octanediol Citrate)/Gallium-Containing Bioglass Composite Scaffolds, Ehsan Zeimaran, Sara Pourshahrestani, Ivan Djordjevic, Belinda Pingguan-Murphy, Nahrizul Adib Kadri, Anthony W. Wren, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

Bioactive glasses may function as antimicrobial delivery systems through the incorporation and subsequent release of therapeutic ions. The aim of this study was to evaluate the antimicrobial properties of a series of composite scaffolds composed of poly (octanediol citrate) with increased loads of a bioactive glass that releases zinc (Zn²⁺) and gallium (Ga³⁺) ions in a controlled manner. The antibacterial activity of these scaffolds was investigated against both Gram-positive (Staphylococcus aureus) and Gram-negative (Escherichia coli) bacteria. The ability of the scaffolds to release ions and the subsequent ingress of these ions into hard tissue was evaluated …

Inorganic Hemostats: The State-Of-The-Art And Recent Advances, Sara Pourshahrestani, Ehsan Zeimaran, Ivan Djordjevic, Nahrizul Adib Kadri, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

Hemorrhage is the most common cause of death both in hospitals and on the battlefield. The need for an effective hemostatic agent remains, since all injuries are not amenable to tourniquet use. There are many topical hemostatic agents and dressings available to control severe bleeding. This article reviews the most commonly used inorganic hemostats, subcategorized as zeolite and clay-based hemostats. Their hemostatic functions as well as their structural properties that are believed to induce hemostasis are discussed. The most important findings from in vitro and in vivo experiments are also covered.

Polyethylene Oxide Nanofiber Production By Electrospinning, H. E. Schneider, J. G. Steuber, W. Du, M. Mortazavi, D. W. Bullock

Journal of the Arkansas Academy of Science

Electrospinning is an inexpensive technique that is used to produce nanofibers for a variety of applications. In electrospinning, a polymer solution is dispensed from a hypodermic-like syringe where an intense electric field attracts the solution to a collector while drawing the polymer into a very thin fiber. The diameter of the fiber can be controlled by tuning the process parameters such as the applied electric field, solution flow rate, distance between syringe tip and collector, and the collector geometry. In this paper we describe results from electrospinning poly(ethylene oxide) (PEO), a likely candidate for applications involving scaffolding for tissue engineering. …

Toward The Synthesis And Characterization Of Pb-Doped Zns Nanocrystals For Solar Energy Applications, Allison Durr

Online Theses and Dissertations

Efficient and affordable energy conversion and energy storage technologies are required to meet society’s increasing demands. Semiconductor nanocrystals are particularly attractive materials for solar energy conversion applications, as their tunable optoelectronic properties can be manipulated to both optimize the absorbance of solar photons and to afford desirable electronic properties. Further tunability of binary semiconductor nanocrystal systems can be realized through substitutional doping. However, doping can be difficult, as the dopants can cause significant lattice strain in the host crystals. Lead-doped ZnS nanocrystals are one promising material for the conversion of solar photons into storable fuels such as hydrogen gas. The …

New Approach Of Modifying The Anatase To Rutile Transition Temperature In Tio2 Photocatalysts, Ciara Byrne, Rachel Fagan, Steven Hinder, Declan Mccormack, Suresh Pillai

Articles

In pure synthetic titanium dioxide, the anatase to rutile phase transition usually occurs between the temperatures of 600 °C and 700 °C. The phase transition temperature can be altered by various methods, including modifying the precursor or by adding dopant or modifier to the TiO2 sample. In an attempt to investigate the phase transition using aromatic carboxylic acids, the current study examines the impact of increasing concentrations of benzoic acid (1 : 0, 1 : 1, 1 : 4 and 1 : 8 molar ratio TiO2 : benzoic acid) on anatase to rutile transition. The samples were characterised using Raman …

Multifunctional Media For Water Quality Control, Spencer Jones

Summer Community of Scholars Posters (RCEU and HCR Combined Programs)

No abstract provided.

Strength And Thermal Properties Of Engineered Cementitious Materials, Hannah Maxwell

Summer Community of Scholars Posters (RCEU and HCR Combined Programs)

No abstract provided.

Rotary Vegetation System: Can It Speed Up The Absorption Of Indoor Air Pollutants?, Yusuke Nakamura

Summer Community of Scholars Posters (RCEU and HCR Combined Programs)

No abstract provided.

Microstrip Patch Antenna Design And Analysis For Wireless Power Applications, Zachary Pinz

Summer Community of Scholars Posters (RCEU and HCR Combined Programs)

No abstract provided.

Virtual Engineering Sciences Learning Lab: Giving Stem Education A Second Life, Stephanie E. August, Michele L. Hammers, Don Brian Murphy, Allison Neyer, Penda Gueye, Robert Q. Thames

Computer Science Faculty Works

Engineering education in the 21st century faces multiple obstacles including limited accessibility of course resources due, in part, to the costs associated with acquiring and maintaining equipment and staffing laboratories. Another continuing challenge is the low level of participation of women and other groups historically underrepresented in STEM disciplines. As a partial remedy for these issues, we established a Virtual Engineering Sciences Learning Lab (VESLL) that provides interactive objects and learning activities, multimedia displays, and instant feedback procedures in a virtual environment to guide students through a series of key quantitative skills and concepts. Developed in the online virtual world …

Extreme Hydrological Changes In The Southwestern Us Drive Reductions In Water Supply To Southern California By Mid Century, Brianna R. Pagan, Moetasim Ashfaq, Deeksha Rastogi, Donald R. Kendall, Shih-Chieh Kao, Bibi S. Naz, Rui Mei, Jeremy S. Pal

Civil and Environmental Engineering Faculty Works

The Southwestern United States has a greater vulnerability to climate change impacts on water security due to a reliance on snowmelt driven imported water. The State of California, which is the most populous and agriculturally productive in the United States, depends on an extensive artificial water storage and conveyance system primarily for irrigated agriculture, municipal and industrial supply and hydropower generation. Here we take an integrative high-resolution ensemble modeling approach to examine near term climate change impacts on all imported and local sources of water supply to Southern California. While annual precipitation is projected to remain the same or slightly …

Thermal Responsive Release Of A Model Drug, Rhoadmine B, From Alginate Bead System, Heather F. Fairbairn Miss

Williams Honors College, Honors Research Projects

Smart drug delivery systems have garnered increased interest in the biomedical community during recent years. Investigation into thermal, pH, and light responsive delivery systems allows for targeted drug release systems to be developed. For this project, thermal responsive release behavior was investigated for the purpose of tuning release systems to achieve 60% release in a specified time by varying the content of thermal responsive polymer. To investigate this, the release profile of a model small hydrophilic drug (rhodamine B) from polymeric alginate beads that have been modified by the addition of thermal responsive poly(N-isopropylacrylamide) (PNIPAAm). It was determined that when …

Roobockey: Remote Controlled, Aim-Assisted Street Hockey Robot, Deboshri Sadhukhan, Troy W. Bowers, Keith R. Martin, John A. Supel

Williams Honors College, Honors Research Projects

The goal of the ROObockey project is to design and construct a floor hockey robot that can competitively shoot a puck. The robot design quickly locates a specific beacon through the use of image processing and uses a pneumatic shooting mechanism to send a puck to a specified target. The beacons act as possible player or goal positions in a hockey game. The robot also utilizes a wireless controller device to allow a user to maneuver the robot across a hockey field.

Corrosion Protection Systems In Offshore Structures, Hristo Ivanov

Williams Honors College, Honors Research Projects

Corrosion plays a pivotal role in the engineering world. Engineers of all disciplines must consider the dangers that this phenomenon can incur. Interestingly, corrosion mitigation is not a topic that is addressed in most academic curricula. The goal of this paper is to give engineering students a brief introduction into corrosion and some of the prevention techniques commonly used today.

The design of a corrosion protection system for offshore structures is discussed in order to illustrate how these techniques can be utilized even in the most extreme environments. First, the driving force behind corrosion is examined, introducing the basic mechanics …

The Role Of E-Cadherin Force In The Maintenance Of Homeostasis In Epithelial Acini, Fnu Vani Narayanan

Theses and Dissertations

Numerous three-dimensional model systems have emerged for emulating the biochemical and physiological states of native tissue. Yet little is known about the effects of mechanical forces on cell behavior in the context of an organized tissue structure in three-dimensional cell-culture. Epithelial cells cultured in a three-dimensional environment comprised of extracellular matrix proteins form spheroids of polarized cells. Cellular responses to mechanical cues, generated from dynamic interactions with the extracellular matrix and neighboring cells, are known to influence cellular behavior to a great extent. Previous studies have shown that tumorigenic progression has been frequently linked to the down regulation of E-cadherin, …

Coherent Spin Transport In Nanowire Spin Valves And Novel Spintronic Device Possibilities, Md Iftekhar Hossain

Theses and Dissertations

Coherent injection, detection and manipulation of spins in semiconductor nansotructures can herald a new genre of information processing devices that are extremely energy-efficient and non-volatile. For them to work reliably, spin coherence must be maintained across the device by suppressing spin relaxation. Suppression can be accomplished by structural engineering, such as by confining spin carriers to the lowest subband in a semiconductor quantum wire. Accordingly, we have fabricated 50-nm diameter InSb nanowire spin valves capped with Co and Ni nanocontacts in which a single conduction subband is occupied by electrons at room temperature. This extreme quantum confinement has led to …

Motion Planning And Control Of Differential Drive Robot, Kaamesh Kothandaraman

Browse all Theses and Dissertations

Motion planning and control of a differential drive robot in a supervised environment is presented in this thesis. Differential drive robot is a mobile robot with two driving wheels in which the overall velocity is split between left and right wheels. Kinematic equations are derived and implemented in Simulink to observe the theoretical working principle of the robot. A proportional controller is designed to control the motion of the robot, which is later implemented on a physical robot. Combination of linear velocity and orientation generates individual wheel velocities which are sent to the robot by wireless communication for its motion. …