Engineering Commons^™

Combustion, Ionization And Sporadic Pre-Ignition In A Turbocharged Gasoline Direct Injection Engine., Shenouda Mekhael

Wayne State University Dissertations

This research is focused on the use of ionization of combustion products in hydrocarbons-air flames to gain a better understanding of the combustion process in turbocharged gasoline direct injection engines. A GM 2.0 L Ecotec GDI-T engine is used in this investigation. The ion current is measured simultaneously by two in-cylinder combustion sensors: the spark plug and the fuel injector. The characteristics of the ion current signals produced by the two sensors are analyzed and correlated with the characteristics of the rate of heat release computed from the cylinder gas pressure. Since this is the first time for the fuel …

Development Of Carbon Based Neural Interface For Neural Stimulation/Recording And Neurotransmitter Detection, Wenwen Yi

Wayne State University Dissertations

Electrical stimulation and recording of neural cells have been widely used in basic neuroscience studies, neural prostheses, and clinical therapies. Stable neural interfaces that effectively communicate with the nervous system via electrodes are of great significance. Recently, flexible neural interfaces that combine carbon nanotubes (CNTs) and soft polymer substrates have generated tremendous interests. CNT based microelectrode arrays (MEAs) have shown enhanced electrochemical properties compared to commonly used electrode materials such as tungsten, platinum or titanium nitride. On the other hand, the soft polymer substrate can overcome the mechanical mismatch between the traditional rigid electrodes (or silicon shank) and the soft …

Utilization Of A Large-Scale Wireless Sensor Network For Intrusion Detection And Border Surveillance, Mosad Helsan Alkhathami

Wayne State University Dissertations

To control the border more effectively, countries may deploy a detection system that enables real-time surveillance of border integrity. Events such as border crossings need to be monitored in real time so that any border entries can be noted by border security forces and destinations marked for apprehension. Wireless Sensor Networks (WSNs) are promising for border security surveillance because they enable enforcement teams to monitor events in the physical environment. In this work, probabilistic models have been presented to investigate senor development schemes while considering the environmental factors that affect the sensor performance. Simulation studies have been carried out using …

Static And Dynamic Behavior Of Carbon Fiber Reinforced Aluminum (Carall) Laminates, Gurpinder Singh Dhaliwal

Wayne State University Dissertations

STATIC AND DYNAMIC BEHAVIOUR OF CARBON FIBER REINFORCED ALUMINUM (CARALL) LAMINATES

by

GURPINDER SINGH DHALIWAL

Advisor: Dr. Golam Newaz

Major: Mechanical Engineering

Degree: Doctor of Philosophy

The main aim of this research work was to investigate the static and dynamic properties of carbon fiber reinforced aluminum laminates cured without using any external adhesive and acid treatment of aluminum layers. A comprehensive study was undertaken to study the effect of adding epoxy resin rich polyester synthetic surface veil cloth layers on the failure modes and flexural and tensile response of these fiber metal laminates (FMLs). The main purpose of adding veil …

Fault Detection And Diagnosis Process For Oversizing Design On Multiple Packaged Air-Conditioning Units, Denchai Woradechjumroen, Haorong Li, Thanapat Promwattanapakee

Durham School of Architectural Engineering and Construction: Faculty Publications

Heating, ventilation, air-conditioning and Refrigeration (HVAC&R) systems are seldom designed or commissioned properly. The situation leads to abrupt or degradation faults resulting in inefficient energy uses, excessive energy consumption and high service costs. To solve these aforementioned problems, fault detection and diagnosis (FDD) is utilized to firstly detect any abnormal conditions of a system and then diagnoses and determines their causes. In order to apply this concept in HVAC oversizing designs, this paper proposes the state-of-art procedure of a FDD procedure for analyzing the inherently faulty design (oversizing) of multiple packaged air-conditioning units used to supply cooling for an open …

Compressor Having A Control And Dagnostic Module, Hung M. Pham, Fadi M. Alsaleem

Durham School of Architectural Engineering and Construction: Faculty Publications

An apparatus includes a Voltage sensor, a current sensor, and a controller. The Voltage sensor measures Voltage values of alternating current power Supplied to a capacitor. The capaci tor is electrically coupled to a compressor. The current sensor measures current values of the alternating current power. The controller is configured to receive the Voltage values and the current values. The controller is configured to determine a first power factor value based on at least one of the voltage values and at least one of the current values. The controller is configured to selectively detect a first capacitor fault in response …

Deposition And Characterization Studies Of Boron Carbon Nitride (Bcn) Thin Films Prepared By Dual Target Sputtering, Adithya Prakash

Electronic Theses and Dissertations

As complementary metal-oxide semiconductor (CMOS) devices shrink to smaller size, the problems related to circuit performance such as critical path signal delay are becoming a pressing issue. These delays are a result of resistance and capacitance product (RC time constant) of the interconnect circuit. A novel material with reduced dielectric constants may compromise both the thermal and mechanical properties that can lead to die cracking during package and other reliability issues. Boron carbon nitride (BCN) compounds have been expected to combine the excellent properties of boron carbide (B4C), boron nitride (BN) and carbon nitride (C3N4), with their properties adjustable, depending …

Assessing Safety Culture Among Personnel In Governmental Construction Sites At Saudi Arabia: A Quantitative Study Approach, Omar Alrehaili

Electronic Theses and Dissertations

Safety is an essential issue for organizations to survive, especially for hazardous industries such as the construction industry. The construction industry is considered to be one of the major industries that help in the growth of the economy and the infrastructure of all countries. Recently, scholars have paid increasing attention to the concept of safety culture due to its role in decreasing the occurrences of accidents and injuries. Safety culture has become the focus of all industries and has received much attention in recent years, especially within the construction industry. Absence of this culture is a major cause of injuries …

A Multi-Scale Approach To Study Solid Oxide Fuel Cells: From Mechanical Properties And Crystal Structure Of The Cell's Materials To The Development Of An Interactive And Interconnected Educational Tool, Amjad Aman

Electronic Theses and Dissertations

Solid Oxide Fuel Cells are energy conversion devices that convert chemical energy of a fuel directly into electrical energy. They are known for being fuel-flexible, have minimal harmful emissions, ideal for combined heat and power applications, highly energy-efficient when combined with gas or steam turbines. The current challenges facing the widespread adoption these fuel cells include cost reduction, long-term testing of fully integrated systems, improving the fuel cell stack and system performance, and studies related to reliability, robustness and durability. The goal of this dissertation is to further the understanding of the mechanical properties and crystal structure of materials used …

Localization And Mapping Of Unknown Locations And Tunnels With Unmanned Ground Vehicles, Doris Turnage

Electronic Theses and Dissertations

The main goals of this research were to enhance a commercial off the shelf (COTS) software platform to support unmanned ground vehicles (UGVs) exploring the complex environment of tunnels, to test the platform within a simulation environment, and to validate the architecture through field testing. Developing this platform will enhance the U. S. Army Engineering Research and Development Center’s (ERDC’s) current capabilities and create a safe and efficient autonomous vehicle to perform the following functions within tunnels: (1) localization (e.g., position tracking) and mapping of its environment, (2) traversing varied terrains, (3) sensing the environment for objects of interest, and …

Rain Induced Runoff Simulation Using A 2d Numerical Model, Tahmina Shirmeen

Electronic Theses and Dissertations

Runoff plays an important role in the agricultural and urbanized environments. Surface runoff is determined primarily by the amount of precipitation and by infiltration characteristics related to soil type, soil moisture, antecedent rainfall, land cover type, impervious surfaces, and surface retention. In this study, CCHE2D, a numerical model for free surface flow hydrodynamics, is applied to study the rain induced runoff and channel flow mixed problems. The main goal of this study is to incorporate rainfall as an input into the existing free surface flow model, CCHE2D; to verify and validate the CCHE2D model’s runoff simulation capability using analytical solutions …

Cargo Shipping Demand Modeling, Infrastructure Mapping, And Emission Impacts Of Selected U.S. Ports, Robert Coffman Richardson

Electronic Theses and Dissertations

This research included shipping demand modeling, infrastructure asset mapping, and impacts of carbon dioxide (co2) emission. The current volume of imports and exports was reviefor U.S. ports in the east coast, gulf coast, and west coast regions. The import and export of goods is a major part of the U.S. economy, and the volume of cargo handled by U.S. ports is expected to increase in the future as population increases. The major motivation for this thesis was the need for U.S. ports to make plans now to accommodate this expected growth in volume. Ports distribute commodities throughout the U.S., and …

Dynamic Thermal Management Of Vertically Stacked Heterogeneous Processors, Ajay Sharma

Electronic Theses and Dissertations

No abstract provided.

Analysis And Modelling Of Sediment Transport On The River Bandon, John Gamble

Theses

Sediment behaviour and transport in river systems has been studied for centuries and potentially impacts on river capacity, navigation, water quality, ecology and flooding. This thesis investigates sediment behaviour and transport on the River Bandon, a river system which has experienced severe flooding on a periodic basis. The River Bandon is located in the South Western River Basin District with a total catchment area of 608km“. The River Bandon offers a positive environment for biodiversity, facilitating habitats for some endangered species. This thesis presents a literature review on the River Bandon and its catchment, on sediment behaviour and transport and …

Backward Dijkstra Algorithms For Finding The Departure Time Based On The Specified Arrival Time For Real-Life Time-Dependent Networks, Gelareh Bakhtyar, Vi Nguyen, Mecit Cetin, Duc Nguyen

Civil & Environmental Engineering Faculty Publications

A practical transportation problem for finding the “departure” time at “all source nodes” in order to arrive at “some destination nodes” at specified time for both FIFO (i.e., First In First Out) and Non-FIFO “Dynamic ” Networks is considered in this study. Although shortest path (SP) for dynamic networks have been studied/documented by various researchers, contributions from this present work consists of a sparse matrix storage scheme for efficiently storing large scale sparse network’s connectivity, a concept of Time Delay Factor (TDF) combining with a “general piece- wise linear function” to describe the link cost as a function of time …

Nebraska Summary: S1061 Massey Ferguson 7716, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1056 New Holland T7.315, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1057 Massey Ferguson 7714, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1031 Challenger Mt565e, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1033 Challenger Mt585e, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1029a Massey Ferguson 7726s, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1026 Massey Ferguson 7720, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1025 Massey Ferguson 7719, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1028 Massey Ferguson 7724, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1064 Massey Ferguson 7718, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1063 Massey Ferguson 7718, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1079 New Holland T7.270, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1075 New Holland T7.210, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1073 New Holland T7.175, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1074 New Holland T7.190, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …