Engineering Commons^™

An Improved Contact Algorithm For Multi-Material Arbitrary Lagrangian-Eulerian Hydrocodes In Three-Dimensions, Kenneth C. Walls, David L. Littlefield

Early Career Technical Journal (ECTJ)

Section 4: Materials; pp. 117-124

Kinetic And Hydrodynamic Simulations Of Laser-Induced Plume Expansion, Omid Azadeh Ranjbar, Alexey N. Volkov

Early Career Technical Journal (ECTJ)

Section 6: Thermal Sciences; pp. 160-167

A Prediction Method For Overall Economic Value Of Fault Detection And Diagnostic Tools For Rooftop And Split Systems, David Yuill, James Braun

Durham School of Architectural Engineering and Construction: Faculty Publications

Fault detection and diagnostics (FDD) tools for air-conditioning application may perform well or poorly, but it is difficult to characterize this performance in a meaningful way. Some recently proposed evaluation techniques have provided various statistics to characterize FDD performance, but these results can be difficult for a potential adopter of FDD to understand. A new method of characterizing FDD performance by predicting the overall economic value of the FDD tool is proposed in this paper. It is applicable to FDD tools intended for air-cooled unitary airconditioners, such as rooftop units (RTU) and split systems. The method gives an estimated dollar …

Automated Detection And Analysis Of Depolarization Events In Human Cardiomyocytes Using Madec, Agnieszka F. Szymanska, Christopher M. Heylman, Rupsa Datta, Enrico Gratton

Biomedical Engineering

Optical imaging-based methods for assessing the membrane electrophysiology of in vitro human cardiac cells allow for non-invasive temporal assessment of the effect of drugs and other stimuli. Automated methods for detecting and analyzing the depolarization events (DEs) in image-based data allow quantitative assessment of these different treatments. In this study, we use 2-photon microscopy of fluorescent voltage-sensitive dyes (VSDs) to capture the membrane voltage of actively beating human induced pluripotent stem cell-derived cardiomyocytes (hiPS-CMs). We built a custom and freely available Matlab software, called MaDEC, to detect, quantify, and compare DEs of hiPS-CMs treated with the β-adrenergic drugs, propranolol and …

Label-Free Imaging Of Metabolism And Oxidative Stress In Human Induced Pluripotent Stem Cell-Derived Cardiomyocytes, Rupsa Datta, Christopher M. Heylman, Steven C. George, Enrico Gratton

Biomedical Engineering

In this work we demonstrate a label-free optical imaging technique to assess metabolic status and oxidative stress in human induced pluripotent stem cell-derived cardiomyocytes by two-photon fluorescence lifetime imaging of endogenous fluorophores. Our results show the sensitivity of this method to detect shifts in metabolism and oxidative stress in the cardiomyocytes upon pathological stimuli of hypoxia and cardiotoxic drugs. This non-invasive imaging technique could prove beneficial for drug development and screening, especially for in vitro cardiac models created from stem cell-derived cardiomyocytes and to study the pathogenesis of cardiac diseases and therapy.

Ultrasonic Doppler Sonar Sensor System For Extraction Of Walk Signatures, Demba B. Komma

Honors Theses

In this work, a portable low cost sensor system is designed for the extraction of walking signatures in humans using the principle of Ultrasonic Doppler Sonar (UDS). UDS involves the use of two ultrasonic transducers acting as a transmitter-receiver pair. The transmitter produces a continuous ultrasonic signal at a specific frequency to be broadcasted onto a moving target, while the receiver will perform a frequency shift on the reflected signal in relation to the movement of the target. The sensor system used in this work is comprised of a frequency generator that drives the transducer with a 40 kHz sine …

Design Of A Caustic Injection System In A Crude Distillation Unit, Andrew R. Cope

Honors Theses

Caustic Injection is a high-risk chemical process utilized in many refineries across the world to control overhead corrosion in the atmospheric distillation column of the Crude Distillation Unit. This thesis discusses the considerations that need to be accounted for in the design of a caustic injection system, as well as my own work at an internship where I was a member of a design team that worked to design a caustic injection system for a nearby refinery.

Supersonic Combustion Ramjet: Analysis On Fuel Options, Stephanie Barone

Honors Theses

This report focuses on different fuel options available to use for scramjet engines. The advantages and disadvantages of JP-7, JP-8, and hydrogen fuels are covered, also the effectiveness and requirements for each fuel are discussed. The recent history of the scramjet engine is included as well as its advantages and disadvantages. An explanation of what each fuel option encompasses and engineering analysis for each fuel are shown. The equations presented for the parametric analysis are shown as functions of the freestream Mach number, with the combustion Mach number as a parameter. The results can be seen for the theoretical possibilities …

An Evaluation Of The Relationship Between Sigma-1 And Sigma-2 Receptors And The Endocannabinoid System, Jenn Miller

Honors Theses

Within the past two decades, sigma receptors have become a popular area for research. Although much has been learned about their structure, subtypes, and functions; there is still much to be learned. Consisting of two receptor subtypes (sigma-1 and sigma-2), it has been discovered that sigma receptor ligands potentiate the analgesic effects of both opiates and cannabinoids, though the exact mechanism and sigma subtype on which this occurs is still unknown. The purpose of this study is to determine if potentiation of opiates and cannabinoids occurs through sigma-1 or sigma-2 receptor signaling. Tetrad assays were performed for: 1. Morphine, an …

Optimization Of Fluidized Bed Isothermal Reactor In A Styrene Production Process, Matthew Hamilton Peaster

Honors Theses

The focus of this thesis is to explain the optimization of a fluidized bed isothermal reactor in a styrene production process. The first section of the thesis gives a summary of chemical process optimization in general. The next portion of the thesis gives an introduction to chemical process simulation software, and it explains how simulation software aids in the design and optimization of chemical processes. The third section of the thesis gives a brief overview of an optimization project of a styrene production process that was completed in the previous semester with a group of three. The final section explains …

The Creation Of Instructional Video Tutorials For Chemical Engineering Process Simulation Software, Nishal Bhikha

Honors Theses

Process simulation software is rapidly becoming a necessity in today's world. Often, learning how to use such a complex tool can be difficult and can take a significant period of time. This thesis outlines efforts to aid in the instruction of this type of software at the University of Mississippi.

Optimization Of Single And Multiple Unit Chemical Processes: A Case Study On The Optimization Of A Styrene Plant Design, Piero Bracamonte

Honors Theses

Optimizing a chemical plant revolves around achieving an efficiency that takes into account operating constraints and costs, along with production requirements and addressing environmental concerns. The first part of this thesis focuses on the team's optimization of a styrene production plant. The goal was to determine what changes from the base case minimize cost to produce the required amount of styrene while adhering to operating constraints. The team used PRO/II, a steady state process simulator, in order to simulate multiple unit operations included in the plant. The measure by which proposed design changes were compared was the calculated net present …

An Investigation Of Abnormal Brain Connectivity Associated With Regions Implicated In Adhd, Roya Gordji

Honors Theses

Research into the unique etiology of attention deficit hyperactivity disorder (ADHD) has in recent years moved from a focus on dysfunction in brain regions to abnormalities between those regions. In this study, we examined the connectivity in brain areas that were deemed to be of particular significance to the disease in terms of their function and already known discrepancies in morphology and connectivity from healthy individuals. The thalamic VA nucleus and the hippocampus were the regions investigated. The data, obtained from the ADHD-200 Sample, consisted of MRI, clinical, and demographic data and were made up of 215 individuals, 117 of …

3d Hydrodynamic Model Development And Verification, Hussein A. M. Al-Zubaidi

Civil and Environmental Engineering Master's Project Reports

A three-dimensional numerical model was developed to simulate hydrodynamic, temperature, and water quality distributions in rivers and lakes. In an attempt to get rid of the extra approximation and complexity, no coordinate transformation has been done and z-coordinate system has been employed. The governing equations are the continuity equation, free surface equation, momentum equations, and conservation equations of temperature and water quality. The model employs the time splitting technique which allows splitting the directions in which we end with two-dimensional governing equations and eventually the solution ends with a tri-diagonal matrix, which is easily solved by Thomas algorithm. The first …

Structural Design Issues Of "Hexapod" Foundations For Wind Turbine Towers, Chad A. Norvell

Civil and Environmental Engineering Master's Project Reports

The current practice for wind turbine foundations is to use massive cast-in-place concrete spread footings or complex pile-supported foundations. Wind turbine generator components and the towers that support them are pre-fabricated and assembled on site, leaving the foundation as the only component of the wind turbine system requiring major in situ construction. The new "hexapod" foundation concept is fully pre-fabricated, uses a fraction of the quantity of concrete used in conventional foundations, and may be dismantled and re-used elsewhere. The wind turbine tower is attached to a steel or concrete hub which is attached to six radial, precast, post-tensioned concrete …

Behavior Of Concrete Beams With Corroded Reinforcement Retrofitted With Carbon Fiber Reinforced Polymer, Needa Marwan Lingga

Civil and Environmental Engineering Master's Project Reports

Severe premature deterioration has been reported in a large number of reinforced concrete (RC) structures in corrosive environments. This research project focused on the behavior of beams that contained corroded steel and were retrofitted with CFRP. The steel in RC beams were assumed to be fully corroded, representing the most severe loss in steel cross-section. Unidirectional CFRP sheets were used to strengthen the deteriorated beams. The experimental program included testing five simply supported rectangular cross section concrete beams. All beams were approximately 1/3^rd scale models, 4in. x 6in. cross sections, and 6ft. long. In three beams, the oiled steel …

A Study On The Current State Of Contaminants Of Concern Research, With A Focus On Biosolids And Regulations, Maren Mariah Fulton

Civil and Environmental Engineering Master's Project Reports

Wastewater treatment plants are a major source of contaminants of emerging concern, as these facilities are the main receptors of these products via household, commercial, and industrial drains, and transport via stormwater runoff. Biosolids are composed of numerous constituents, with a number of environmentally persistent and potentially toxic contaminants of emerging concern identified as present in large concentrations. Research is needed to understand the transport and fate mechanisms of these compounds in biosolids. Additionally, this research is needed to determine a new priority framework to regulate CECs, both on the national level and regional levels. Wastewater treatment plant influent and …

Electromagnetic Analysis Of Different Geometry Of Transmitting Coils For Wireless Power Transmission Applications, Mohammad Haerinia, Ali Mosallanejad, Ebrahim S. Afjei

Electrical Engineering Student Publications

No abstract provided.

Enhancing Student Learning By Narrowing The Gap Between Feedback Giving And Feedback Receiving, Eileen Goold

Conference Papers

Feedback is one of the most powerful influences on learning and achievement. However the mere provision of feedback to students does not necessarily lead to improved learning. Feedback is ineffective if it does not close the gap between learning goals and students’ performance. Often students do not have clear goals and they do not know what learning activities will improve their learning performance. Consequently the opportunity to learn from the feedback is lost. Learning is a social process and while young people have increasingly strong social needs they struggle with academic language. This study investigates the influence of lecturers’ feedback …

Laser Micromachining Of Contactless Rf Antenna Modules For Payment And Cards And Wearable Objects, Matthias John

Conference papers

The use of contactless payment methods for consumer transactions is becoming increasingly popular - 1.1 billion contactless transactions were made by Visa cardholders across Europe in the 12 months to July 2015 (€12.6 billion total value). Typically the contactless payment process uses a Radio Frequency (RF) enabled smartcard or a Near Field Communication (NFC) enabled smartphone. In order to ensure continued market acceptance and repeat usage the contactless operation must be robust, quick and efficient. This paper describes the development of an inductively coupled contactless smartcard utilising UV DPSS laser micromachining to fabricate the novel antenna structures from copper laminated …

Compositional Changes For Reduction Of Polymerisation-Induced Shrinkage In Holo, Dervil Cody, Mohesh Moothanchery, Emilia Mihaylova, Vincent Toal, Svetlana Mintova, Izabela Naydenova

Doctoral

Polymerisation-induced shrinkage is one of the main reasons why many photopolymer materials are not used for certain applications including holographic optical elements and holographic data storage. Here, two compositional changes for the reduction of shrinkage in an acrylamide-based photopolymer are reported. A holographic interferometric technique was used to study changes in the dynamics of the shrinkage processes occurring in the modified photopolymer during holographic recording in real time. Firstly, the effect of the replacement of the acrylamide monomer in the photopolymer composition with a larger monomer molecule, diacetone acrylamide, on polymerisation-induced shrinkage has been studied. A reduction in relative shrinkage …

A New Educational Mobile Devices Platform For Social Inclusion In Tanzania, Fredrick Mtenzi

Articles

Abstract— It is evident that advances in technology has led to improvement in societal wellbeing. In this paper we demonstrate how mobile phones are used in providing reliable and quality education to students in disadvantaged areas of Tanzania. The main contribution is on leveraging on the success that Tanzania has had on using mobile banking to the un-banked population. These lessons are adapted to the education sector, where clever/smart integration of existing disruptive technologies such as mobile phones and social networks are be used to provide access to high quality educational contents. Further, the paper shows how educational content can …

Overview Of Fiber Optic Sensor Technologies For Strain/Temperature Sensing Applications In Composite Materials, Manjusha Ramakrishnan, Ginu Rajan, Yuliya Semenova, Gerald Farrell

Articles

This paper provides an overview of the different types of fiber optic sensors (FOS) that can be used with composite materials and also their compatibility with and suitability for embedding inside a composite material. An overview of the different types of FOS used for strain/temperature sensing in composite materials is presented. Recent trends, and future challenges for FOS technology for condition monitoring in smart composite materials are also discussed. This comprehensive review provides essential information for the smart materials industry in selecting of appropriate types of FOS in accordance with end-user requirements.

Stability Sensitivity Of Low-Rise Steel-Moment Framed Buildings To Hazard-Independent Damage, Trey Reynolds Powell

Electronic Theses and Dissertations

Structural stability has been the subject of much research in recent years. Simply, structural stability may be vieas the ability of the structure’s response to be relatively unaffected by perturbations to its system. Stability of low-rise steel-moment framed buildings and their sensitivity to perturbations from significant damage are the focus of this work. Perturbations, or changes from the normal state of the structural system, have the ability to affect the structural response. Second-order geometric effects imposed through column axial loads, and/or initial out-of-plumbness during the construction process, are a comperturbation in steel framing systems. If the structural members subjected to …

Nd2fe14b: (Nd1-X Dyx)2 Fe14b Core-Shell Structure Formation By Hot Press Liquid Phase Sintering, Li Chen

Dissertations, Master's Theses and Master's Reports

The purpose of this project is to produce Nd rich core-Dy rich shell grain structure in liquid phase sintered alloys by consolidating Dy rich powder mixed with powder. The technical barrier to producing the core-shell microstructure is that the Dy composition variations will homogenize during the consolidation process. This dissertation is based on the hypothesis that compositional homogenization of the core-shell structure can be minimized if consolidation occurs under applied pressure (hot press liquid phase sintering). The hypothesis is tested by comparing the homogenization of the Dy composition to the degree of consolidation with and without applied pressure. It is …

Incorporating Driver’S Behavior Into Predictive Powertrain Energy Management For A Power-Split Hybrid Electric Vehicle, Lei Feng

Dissertations, Master's Theses and Master's Reports

The goal of this series of research is to advance hybrid electric vehicle (HEV) energy management by incorporating driver’s driving behavior and driving cycle information. To reduce HEV fuel consumption, the objectives of this research are divided into the following three parts.

The first part of the research investigates the impact of driver’s behavior on the overall fuel efficiency of a hybrid electric vehicle and the energy efficiency of individual powertrain components under various driving cycles. Between the sticker number fuel economy and actual fuel economy, it is well known that a noticeable difference occur when a driver drives aggressively. …

Restraint System Design And Evaluation For Military Specific Applications, Sebastian Karwaczynski

Dissertations, Master's Theses and Master's Reports

This research focuses on designing an optimal restraint system for usage in a military vehicle applications. The designed restraint system must accommodate a wide range of DHM’s and ATD’s with and without PPE such as: helmet, boots, and body armor. The evaluation of the restraint systems were conducted in a simulated vehicle environment, which was utilized to downselect the ideal restraint system for this program.

In December of 2011 the OCP TECD program was formulated to increase occupant protection. To do this, 3D computer models were created to accommodate the entire Soldier population in the Army. These models included the …

Evaluating Groundwater Recharge In The Saloum Region Of Senegal, Alexander Wohlgemuth

Dissertations, Master's Theses and Master's Reports

Approximately 1.2 billion people in the world live in an area facing physical, or absolute, water scarcity (defined as access to less than 1,000 cubic meters of water). This number is projected to increase to 1.8 billion by the year 2025. Thirty-eight percent of the world’s population lives in arid, semi-arid or dry subhumid regions, which translates to a high dependence on the 30% of the world’s freshwater present in the ground. Further, the rate of water use is increasing rapidly – between two and two and a half times that of population growth, over the last century.

In regions …

Simulation Of Scalability For Autonomous Mobile Microgrids, Nathan Beyers

Dissertations, Master's Theses and Master's Reports

Microgrids are small-scale, decentralized systems for generation, storage, and management of electricity to provide power within a local area. By establishing these microgrids using autonomous robots, they can be made safer and more easily reconfigurable. This thesis presents a plan and outlines the infrastructure needed for scaling up previous experimental work on such systems. This work brings together a variety of tools in the form of both software and hardware to set the stage for how further development can be completed. An architecture for physical testing has been built to validate the full potential of navigation and making electrical connections …

Design Of Real-Time Combustion Feedback System And Experimental Study Of An Rcci Engine For Control, Jayant Kumar Arora

Dissertations, Master's Theses and Master's Reports

Premixed compression ignition (PCI) technologies offer high efficiency and low emissions but are usually confined by limited operation range as well as high pressure rise and heat release rate. In this work, a more recently developed PCI mode is explored where in-cylinder blending of two fuels with different auto-ignition characteristics (diesel and gasoline) is utilized to create reactivity stratification such that heat release rate and combustion timing can be controlled. This mode has been defined as Reactivity Controlled Compression Ignition (RCCI).

As part of this thesis, the main aim is to study various parameters that can be used to control …