Engineering Commons^™

Development And Validation Of An Operator-Friendly Flight Dynamics System For High-Precision Leo Nanosatellite Operations, K. W. Cheong, M. C. Kim, P. R. Kim, M. G. Kim, J. Y. Yu, G. H. Ju

Small Satellite Conference

A ground-based Flight Dynamics System (FDS) provides essential orbit information for satellite monitoring and mission planning. This study develops a Python-based integrated FDS that processes GPS observations, TLEs, and ephemerides through interconnected orbit determination, orbit propagation, and event prediction modules. The developed system combines Batch Least Squares orbit determination, HPOP/SGP4 propagation, covariance analysis, and nodal-crossing prediction within a consistent time and coordinate framework. 

The objective is to establish and validate an integrated workflow that generates reliable orbit states, future ephemerides, uncertainty information, and operational event products for CubeSat ground operations 

Experimental Assessment Of A 15-N Nitrous Oxide And Ethane Thruster For Premixed And Non-Premixed Operations, Eunwoo Jung, Juwon Kim, Eunkwang Lee, Keunseok Lee, Yonggu Kim, Minwoo Lee

Small Satellite Conference

• Nitrous Oxide (N₂O) has attracted significant attention as an oxidizer for next-generation small scale propulsion systems due to its non-toxic and high vapor pressure, which enables self-pressurization.  
• By combining N₂O with hydrocarbon fuels, propulsion systems can be operated either as bipropellant systems or as premixed propulsion systems.  
• N₂O-based premixed propellants, commonly known as NOFB (Nitrous Oxide Fuel Blend), require only a single propellant tank, similar to monopropellant systems, resulting in a simplified system architecture; however, their high susceptibility to flashback necessitates the incorporation of dedicated flashback prevention devices.  
• The objective of this study is …

Functional Analysis Of Raspberry Pi Rp-Series Microcontrollers Using High-Dose Gamma Radiation For Low-Cost Cubesats, Tyler Nielsen, Aaron Bournias, Joe Dubois

Small Satellite Conference

Radiation testing of non-rad hard microcontrollers is crucial for low-cost CubeSats, allowing teams to avoid the prohibitive cost of radiation-hardened systems while still selecting microcontrollers that will survive in the irradiated environment of space.

In-Transit Debris Remediation: Dual-Use Logistics For Sustainable Cislunar Smallsat Constellations, Wanjiku Chebet Kanjumba

Small Satellite Conference

A Debris Crisis Meets A Logistics Boom: Low- and high-Earth orbit keep accumulating debris faster than the atmosphere can clear it, even as NASA's Artemis and CLPS programs establish routine trans-lunar traffic. The 2009 Iridium-Cosmos collision and later anti-satellite tests proved that single fragmentation events can irreversibly degrade critical orbital shells, raising the specter of Kessler Syndrome. 

• 46,600+ objects tracked on orbit today, with ~130 million sub-cm fragments (ESA, 2025)
• $500K-$2M cost per kilogram for dedicated ADR, fiscally intractable at system scale
• 5-10 / yr large objects must be removed to stabilize LEO (Liou & Johnson)

The Unit-Economics Problem: Purpose-built …

Lessons Learned From The Hyvrid 3u Cubesat Development, Kim Jee Hoon

Small Satellite Conference

Space Object Surveillance System 

• Hanwha Systems’ Next Generation Satellite Laser Ranging (NGSLR) uses the turnaround time of laser emitted from the ground to measure precise distance of satellites or space objects.  
• It is also capable of precise orbit prediction and active response by utilizing high-energy laser. 

Verification Satellite

• CubeSat HYVRID is made to operate as a target satellite of the NGSLR system, verifying the laser ranging, precise orbit prediction, and active response technology.
  • GPS raw data
  • laser detection data
  • images captured before-and-after active response

Numerical Characterization Of Phase Coherence In Distributed Smallsat Sar Interferometry, Cameron Kaminski

Small Satellite Conference

Distributed SmallSat SAR requires independent spacecraft to maintain phase coherence over long integration times. This work presents a Monte Carlo simulation that combines manufacturer-derived oscillator phase noise, spacecraft thermal dynamics, and orbital perturbations to evaluate passive coherence limits. The results show that oscillator quality alone is insufficient; differential thermal-state evolution becomes a dominant driver of long-duration coherence performance.

Polarization-Modulated Laser Satellite Experiment (Pulse-A) Thermal Control, Zane Ebel, Alexavier Moore, Samy Kouidri, Veryan Johnson, Robert Pitu, Juan Ignacio Prieto Asbun, Tian Zhong

Small Satellite Conference

• UChicago's first student-developed satellite, started in September 2023
• Accepted under Batch 15 of NASA's CubeSat Launch Initiative (CSLI) in March 2024
• 3U CubeSat demonstrating space-to-ground optical downlink using circular polarization shift keying (CPolSK)
• LEO, 400-500 km, ~90 min orbit
• Preparing for Critical Design Review in Fall 2026

Aggiesat6 University Cubesat Ops Prep And Leops, Avery G. Barriga, Garrett M. Stevenson, John F. Connolly

Small Satellite Conference

AggieSat6 (AGS6) is a 6U CubeSat designed and developed by students at Texas A&M University (TAMU) as part of the University Nanosatellite Program (UNP) NS-10 cycle. The mission will demonstrate a space-based radio frequency array for Space Domain Awareness (SDA) applications and collect low-energy electron radiation data to improve existing environmental models. Beginning in January 2025, students at TAMU established mission operations architecture, implemented operator training and certification, and prepared to assume sole responsibility for on-orbit operations. The AggieSat6 bus launched into Low Earth Orbit (LEO) in April of 2026. The AGS6 Mission was supported by the University Nanosatellite Program. …

Experimental Analysis Of Cryptography Overhead For Secure Cubesat Telemetry, Tyler Field, Michael Goryll

Small Satellite Conference

Encryption consumes critical and limited resources, such as computing power, energy, and memory. Results from this research has helped SquidSat, a student-led 3u CubeSat launching sometime in 2027-2028, by providing data showing which microcontrollers are most effective for encryption algorithms.

Forecast-Aware Formation Initialization For High-Revisit Vleo Imaging, Mina Khalilzadeh Fathi, Zachary Wrensch, Chaoying Pei

Small Satellite Conference

Very-low Earth orbit (≲ 300 km) enables high-resolution imaging with smaller optics. A leader/follower pair can halve the revisit gap by maintaining precise along-track phasing. 

At 250 km, even a small ballistic-coefficient mismatch amplified by geomagnetic storms drives a phasing error that grows quadratically in time and closes the imaging window within days. 

• Conventional methods focus on formation keeping and react to density after the fact. 
• We act before the drift grows: a density forecast is used to choose both the handover phase and the optimal time to reverse the drift. 

F Prime To Flight Faster: Hardware-In-The-Loop Continuous Integration For Accelerated Cubesat Development, Nate Gay, Saidi Adams, Michael Pham

Small Satellite Conference

Flight software teams iterate quickly in development and then slow down at integration, because the software must be validated against real hardware that is itself still changing. 

Bench testing is manual, intermittent, and happens late. Defects surface days after the commit that caused them, once the context is gone and the change has been built on.

Promoting Assured Formation Flight Autonomy Onboard Resource Constrained Systems, Ryan Johnson, Maggie Michelsen, Jackson Gardner, Mario Harper, Charles Swenson, Jackson Kulik, Shawn Jones

Small Satellite Conference

Autonomously determining fuel-optimal, formation-keeping trajectories for small spacecraft operating in formation flight is often limited by available processing power. Because SmallSat missions are constrained by size, weight, and power (SWaP), field-programmable gate arrays (FPGAs) are an attractive option for onboard computing. Traditional formation-keeping relies on convex optimization to solve for fuel-optimal burns and burn times; however, implementing these solvers on FPGAs is challenging due to limited board resources.

To address the need for fast, reliable trajectory planning onboard space vehicles, we investigate leveraging machine learning to reduce computational cost for real-time, onboard execution. We propose using a deep neural network …

Propellant-Free Formation Keeping Using Environmental Perturbations In Leo Via Orbital Angular Momentum Vector Matching, Yu Seike, Takaya Inamori, Keita Tanaka

Small Satellite Conference

Small-satellite formation flying enables new mission capabilities.

e.g. MIMO (Multi Input Multi Output) Communication

Challenge: Conventional formation keeping requires thrusters. Small satellites have limited onboard resources.

Plasma Magnet Propulsion For Smallsat Deep Space Missions: Scaling Laws, Trajectory Analysis, And A Path To Flight Demonstration, Surya S. Kalluri

Small Satellite Conference

The plasma magnet uses a rotating magnetic field (RMF) to drive azimuthal currents in ambient plasma, inflating a spacecraft dipole to kilometre scale so momentum is taken directly from the solar wind. Using plasma currents in place of physical coil proposed for similar concepts previously like Magnetosail, M2P2 etc., eliminates the constraints on size and dynamic pressure of seed plasma. Because the inflated plasma — not a structure — sets the obstacle size, thrust is independent of distance from sun while the required power falls as the antenna grows. Earlier experiments showed >10 kA driven currents, inflation beyond ten coil …

Bcon-2 Operations And Pre-Flight Testing, Kenny Blanton, Brayden Kuchenbacker, Dan White

Small Satellite Conference

As part of the Dream Big Phase I mission, Valpo Space Program’s (VSP) satellite BCON-2 is a 0.5U ThinSat CubeSat designed by NearSpace Launch (NSL).

Dimensions: 0.5U ThinSat (10 cm × 10 cm × 5 cm).

• Comms/MCU Board: STM-32 based PocketQube satellite board that utilizes an AX5043 transceiver to manage VHF/UHF radio communications and subsystem connectivity via CAN bus.
• ADCS Payload: Collaborative flight of the University of Luxembourg’s (UniLu) Space Systems Engineering (SpaSys) system; features their PCB-embedded tri-axial magnetorquer coils Attitude Determination and Control System (ADCS).
• Square Koch Fractal Antenna: The RF systems remain inactive for this mission due to …

Experimental Investigation On Nanocellulose And Aluminium-Oxide Hybrid Nanofluid As A New Coolant For Radiator, D. Ramasamy, Sivaraos Sivaraos, K. Kadirgama

The Nexus of Sustainability and Energy Technology Journal

Improved efficiency leads to more compact design of the radiator. The research is conducted to prove that addition of Aluminium Oxide and nanocellulose originating from plant base with varying concentration provides a better thermal efficiency compared to usage of distilled water as radiator coolant. The objective of the research is to improve a new radiator coolant based on combination of aluminium oxide and nanocellulose with readily available coolants which is Ethylene Glycol and to investigate the erosion of nanocellulose coolant on automotive radiator. The scope of the research are the nanocellulose dispersed in base fluid which is from 60:40, (EG:W). …

Effects Of Air Injection Styles And Burner Geometry On Blowoff In Premixed Swirl Flame, Haidar Ali Janna, Zaid Aldulaimi, Mohammed Alfahham

The Nexus of Sustainability and Energy Technology Journal

Understanding the effect of air injection strategies and burner configuration on flame stability is essential for preventing blowoff in premixed swirl combustion systems. This experimental study investigates the blowoff limits of liquefied petroleum gas (LPG) flames in tangential swirl burners with two different geometries,namely two-inlet and three-inlet designs, while maintaining the same geometric swirl number and swirl strength. Two air injection strategies were examined:axial air injection which introduced through the burner base plate,and an air curtain system supplied through the inner circumference of the burners nozzle. Blowoff limits were recorded over a wide range of operating conditions to quantify the …

Implementation Of 4-Ir In Scm Of Woven Apparel Industry – A Case Study In Bangladesh For Prosperity And Sustainability, Kaniz Farhana, Nazibah Nowreen Onadee, Farhana Mabia Mim, Fuzail Ahmed Khan Rajit, Md. Fahad Faruk Pavel, S.M. Farhana Iqbal, Abu Shadate Faisal Mahamude

The Nexus of Sustainability and Energy Technology Journal

The significance of the Fourth Industrial Revolution (4-IR) for supply chain management (SCM) in the woven clothing industry is emphasized by this survey study. The implementation of cutting-edge technologies that can improve these aspects, like IoT, RFID, blockchain, big data analysis, cybersecurity, and automation, is examined from the viewpoints of woven clothing manufacturers. This investigation seeks to determine Bangladesh's key technological barriers as well as the primary motivator for the weaving RMG's adoption of cutting-edge technologies. Here, a combination of methods, including fieldwork and data collection, has been performed for thorough analysis. The research outlines the current state of affairs …

Evaluation Of Graphene Cathode And Aluminum Ion Ev Battery Performance: A State-Of-The-Art Analysis For Future, Abu Shadate Faisal Mahamude, Kaniz Farhana

The Nexus of Sustainability and Energy Technology Journal

Lithium-ion batteries may eventually be replaced with rechargeable aluminum-ion batteries (AIBs) due to their high energy density, increased safety, and plentiful supply of raw materials. The development of appropriate cathode materials for AIBs is a major priority these days. As a result of their better quality, graphene-based cathodes have a great chance of success. Graphene is a relatively new and promising material with a unique set of chemical and physical characteristics. Graphene's high electron conductivity and large specific surface area make it seem like one of the best electron-conducting additions, but there are several other ways to increase the cathode …

Atomistic Insights Into The Interfacial Properties And Thermal Transport Of Mxene–Copper Nanocomposites: A Molecular Dynamics Study, Navid Aslfattahi, Maryam Sadat Kiai, K. Kadirgama, L. Samylingam, Chee Kuang Kok, Mohd A.F. Rosli, Thong Leng Lim

The Nexus of Sustainability and Energy Technology Journal

Understanding the interfacial heat transport mechanisms in Ti₃C₂T_x–copper nanocomposites is essential for developing advanced Thermal Interface Materials (TIM) for electronic and energy systems. This study provides atomistic insights into how MXene surface terminations (–O, –OH, –F), copper crystallographic orientations ((111), (100), (110)), and MXene layer thickness influence thermal conductivity and interfacial thermal resistance. O-terminated MXene exhibited the strongest interfacial adhesion (∼0.45 J/m²) and the highest thermal conductivity (∼68 W/m· K), while F-terminated MXene showed the weakest interfacial bonding and poorest heat transfer (∼45 W/m· K). Increasing the MXene thickness introduced additional phonon …

Synergistic Reinforcement Of Lignin–Chitosan Hydrogels Using Vanillin As A Sustainable Green Crosslinker, Moses Ayitey-Adjin Jr., Mohammad Jahid Hasan, Jeremy Erb, Kishore Chand, Garry S. Crosson, Kenya Crosson, Esteban Ureña-Benavides, Erick Salvador Vasquez-Guardado

Chemical and Materials Engineering Faculty Publications

While bio-based hydrogels derived from lignin and chitosan are promising sustainable adsorbents, their practical application is hindered by poor mechanical stability. This study addresses this limitation by synthesizing lignin-chitosan hydrogels using vanillin as a green, bio-derived crosslinker via a facile solution-casting method. The formation of imine (Schiff base) linkages between the aldehyde groups of vanillin and the primary amines of chitosan was confirmed by FTIR spectroscopy (C = N stretching at ~ 1602 cm^− 1). SEM and TGA results demonstrated a reduction in the pore size of the crosslinked hydrogel and an enhanced residual thermal mass. Rheological and …

Techno-Economic Analysis Of Implementing Carbon Capture And Storage (Ccs) At The Punagaya 2×100 Mw Coal Power Plant, Ricky Andreas Kristianto Siringoringo, Rahma Muthia, Widodo Wahyu Purwanto

Journal of Materials Exploration and Findings

The increase in greenhouse gases due to the combustion of fossil fuels is one of the major drivers of global warming and consequently drives the development of low-carbon technologies such as Carbon Capture and Storage (CCS). The aim of this study is to evaluate the technical and economical feasibility of the implementation of CCS technology in the Punagaya Subcritical Coal-Fired Power Plant (CFPP) 2×100 MW as a part of the energy transition strategy towards Net Zero Emissions (NZE) 2060. The simulation was carried out using Aspen HYSYS software, including coal combustion, CO₂ capture through MDEA-PZ solvent, dehydration, transportation, and storage …

Exploring Red Palm Oil As A Sustainable Plasticizer For Carbon Black-Filled Ssbr/Br Tire Tread Compounds: A Comparative Evaluation Of Commercial Alternatives, Norma Arisanti Kinasih, Mohamad Irfan Fathurrohman, Santi Puspitasari, Dewi Kusuma Arti, Abdulhakim Masa

Journal of Materials Exploration and Findings

This study investigates the application of red palm oil (RPO) as an alternative vegetable oil resource to substitute petroleum-based plasticizers, which have environmental and health concerns, in carbon black (CB)-filled SSBR/BR tire tread compounds. The plasticizing effects of RPO were thoroughly evaluated by comparing them with a commercial bio-based plasticizer, Epoxidized Soybean Oil (ESBO), and two safer petroleum-based oils, Naphthenic Oil (NYNAS) and Treated Distillate Aromatic Extract (TDAE). The initial investigation shows that fatty acid composition is imposing regarding the plasticizing effect. The higher unsaturated fatty acid content in RPO than in ESBO improved tensile strength and degraded rolling resistance …

Techno-Economic Analysis Of The Utilization Of Waste-To-Energy In Jakarta Industrial Estate Pulogadung, Wahyu Punjung Pesonagrata, Mohammad Akita Indianto

Journal of Materials Exploration and Findings

Indonesia has a serious waste problem, which ranking second in marine pollution. Due to significant environmental impacts, a solution to overcome the complexity of waste problems is needed. This study took sample on waste management in Jakarta Industrial Estate Pulogadung (JIEP). JIEP is an Industrial area which covers 443 hectares of land in East Jakarta. This study aims to address Indonesia's serious waste problem by exploring the potential utilization of waste in the Jakarta Industrial Estate Pulogadung (JIEP) as Refuse-Derived Fuel (RDF) for a waste-to-energy (WtE) power plant. The proposed method used a steam power plant with RDF as fuel …

Analysis Of Tower Stringset Replacement From 33 Kv To 66 Kv Considering Sagging Clearance, Muhammad Lazuardi Azzura, Anne Zulfia Syahrial, Julius Purnama Eka Kartika

Journal of Materials Exploration and Findings

Efforts to increase the capacity of transmission networks are often undertaken by uprating the operating voltage of existing lines rather than building entirely new infrastructure. Such uprating typically involves the replacement of tower insulator stringsets to withstand higher voltages, while also ensuring that mechanical performance remains adequate. This paper presents an analysis of uprating the Parakan–Sunyaragi transmission line from 33 kV to 66 kV, with particular emphasis on conductor sagging and the resulting clearance from the ground. The methodology employed includes calculations based on catenary equations, analysis of conductor tensile forces, and a comparative evaluation of two widely used insulator …

A Basic Review Of Design And Material Selection For Shovel’S Body, Anggi Buana, Winarto Winarto

Journal of Materials Exploration and Findings

Manual shovels still play an important role in construction and agricultural work, selecting the right material is crucial to obtain a shovel body that has structural reliability, ergonomic efficiency, and sustainability. In this study, a method for selecting the most suitable material will be discussed by combining functional analysis (Ashby's material performance index, and the Multi-Criteria Decision Making approach). From the figure of load, material index is formulated as a reference for performance property requirements. Using data from analysis software and qualitative data, eight performance criteria such as durability, corrosion resistance, cost, and environmental impact are then weighted using the …

Metallurgical Investigation Of A Modified Eye Bolt Failure Caused By Improper Weld Extension, Specification Deviation, And Crevice Corrosion, Dimas Muhammad Fawwaz, Reza Miftahul Ulum, Johny Wahyuadi Soedarsono, Yudha Pratesa

Journal of Materials Exploration and Findings

A modified eye bolt from the David Arm Manhole Storage Tank underwent thorough metallurgical study due to the consequences of the bolt's malfunction during operation. Safety issues arose when the manhole door detached during operation. The mechanical testing and chemical composition analysis of the bolts indicated they were manufactured from an ASTM A193 Grade B7 material used for high-temperature bolting. This material did not conform to the engineering drawing, which mentioned SA 563A, which is about nuts, not bolts. This contradiction clearly shows that the eye bolt which was installed does not conform to the intended design. Welded connections of …

Rejection Of Fe (Iron) And Kmno4 (Organic Substance) Parameters In Peat Water Using Organic Membranes, Muhamad Rafli Sakti Mulia Gonera, Siti Umi Kalsum, Sarah Fiebrina Heraningsih

Journal of Materials Exploration and Findings

Peat water is a surface water source widely used by people in swampy and lowland areas, but it has poor quality characteristics such as high organic matter content, low pH, and dissolved metal levels such as iron that exceed the threshold. These conditions can cause health problems and reduce the quality of clean water so that effective treatment technology is needed. This study aims to analyze the effectiveness of ultrafiltration membranes made from chitosan from shrimp shell waste in rejecting iron (Fe) and organic substances in peat water, and to determine the effect of pressure on separation performance. This study …

Novel Uncrewed Aircraft Water Sampling Device, Justin Fratto, Avinash Muthu Krishnan, Kayla D. Taylor, David Zink, Marc Compere, Kevin Adkins

Discovery Day - Daytona Beach

Supported by the Environmental Protection Agency (EPA), this project’s objective is to create a novel simultaneous surface and discrete depth water sampler for use with an uncrewed aircraft, something which has not been done before. The device will be used to improve the spatiotemporal resolution of harmful algal bloom (HAB) monitoring on Lake Okeechobee in South Florida to provide timely and precise information on water quality and HABs. HABs are characterized by the EPA as certain species of algae that can produce harmful toxins and produce excessive blooms or growth in certain conditions. Often occurring in warmer months due to …

Improving The Concrete Compressive And Flexural Strength With A Low Fraction Addition Of Carboxylated Nitro-Oxidized Cellulose Nanofibrils From Banana Rachis, Ngesa Ezekiel Mushi, Emmanuel Kagya

Tanzania Journal of Science

Conventionally, concrete strength depends on the bonding interface, especially in hydrated products such as calcium silicate hydrate (CSH). As a result, concrete is sensitive to tensile load. With its unique properties, a low fraction of carboxylated nitro-oxidized cellulose nanofibrils (NOCNF) from the banana rachis is employed to improve the mechanical performance of the concrete nanostructurally. Compressive and flexural strength using the NOCNF content at 0, 0.05, and 0.1 wt.%, cured for 7 and 28 days, were evaluated. Notably, the compressive strength increased by 16 % and the flexural strength by 13 % at 0.1 wt.% NOCNF compared to plain concrete …