Heat Transfer, Combustion Commons^™

Interaction Of Particles With Plasma And Shock Produced By Pulsed Spark Discharge, Shomik Mukhopadhyay

Dissertations

Interactions of powders with high-temperature plasma and shockwaves occur in diverse scenarios, such as nuclear blasts, accidental industrial dust explosions, solid propellant combustion in explosive charges and when removing contaminants from surfaces. Electrostatic Discharge (ESD), known for generating shock and plasma, is a promising lab-scale technique for simulating these interactions. Studies with ESD involved placing powders near a spark-producing gap between electrodes and observing mechanical and chemical processes like particle motion and ignition. A limited range of spark conditions and material properties have been tested, which facilitated the development and validation of preliminary computational models describing this system. Significant gaps …

Mechanical Engineering Capstone: A Reflection On The Design And Prototyping Of A Portable Water Heating System, Timothy Goldsmith

Honors Program: Senior Projects (Public)

This thesis includes several documents from a Mechanical Engineering Capstone course. These include project postmortem reports written at the conclusion of each term. These reports summarize the designing and prototyping of a portable water heating system. Additionally, this thesis includes written feedback on the final presentations for six other senior design teams. In these documents, presentations and projects are evaluated and encouragement and feedback are provided for the teams. The final component of this thesis is an essay reflecting on the different leadership roles assumed during the capstone course.

Numerical Simulation Of Laser Induced Elastic Waves In Response To Short And Ultrashort Laser Pulses., Alireza Zarei

All Dissertations

In an era of intensified market competition, the demand for cost-effective, high-quality, high-performance, and reliable products continues to rise. Meeting this demand necessitates the mass production of premium products through the integration of cutting-edge technologies and advanced materials while ensuring their integrity and safety. In this context, Nondestructive Testing (NDT) techniques emerge as indispensable tools for guaranteeing the integrity, reliability, and safety of products across diverse industries.

Various NDT techniques, including ultrasonic testing, computed tomography, thermography, and acoustic emissions, have long served as cornerstones for inspecting materials and structures. Among these, ultrasonic testing stands out as the most prevalent method, …

Experimental And Numerical Investigation Of Air-Cooled Heat Sinks, Ethan Weems

Mechanical Engineering Undergraduate Honors Theses

Lightweight and affordable cooling capabilities are critical as the physical scale of electronics continues to decrease. Air-cooled heat sinks that dissipate heat from electronic components to the surrounding air are excellent candidates to fill this role. While plate-fin and pin-fin heat sinks have been implemented extensively for electronic cooling, recent advances in additive manufacturing enable the fabrication of more complex structures. In this undergraduate Honors thesis, a means by which to generate novel heat sink geometries is presented. To that end, an experimental characterization facility is developed to evaluate existing traditional heat sinks. The heat transfer performance of the heat …

Methodologies For Optimization And Surface Heat Flux Estimation For Hybrid Thermal Protection Systems, Syed Arafun Nabi

Theses and Dissertations

Thermal protection system (TPS) plays a pivotal role in safeguarding space vehicles from extreme aerothermal heating during atmospheric entry. To ensure effective thermal management, Hybrid Thermal Protection seamlessly integrating both active and passive TPS is an innovative solution. The passive TPS consists of an insulative layer on vehicle skin to counteract the aerothermal heat. Although a thicker layer enhances insulation, a trade-off arises between the thickness of the passive layer and the spacecraft’s weight. Beneath the passive TPS layer lies the active TPS functioning as a heat exchanger where the vehicle fuel liquid is considered as coolant. The effectiveness of …

Synthesis Of Durable Zeolite 13x Insertion Coatings And Scaled-Up Experimental Demonstration For Co2 Capture, Daniel Jamil Hocheimy

Theses and Dissertations

Minimizing the energy requirement for capturing carbon dioxide (CO₂) from post-combustion sources is critical to efficient industrial decarbonization and subsequent mitigation of the effects of climate change. The current portfolio of CO₂ capture technologies includes absorption, membrane separation and packed bed adsorption, which suffer from high energy and temperature requirements, scalability, and location dependency issues. Adsorption-based systems could cater to these concerns; however, their current embodiments primarily use packed adsorbent bed design and electricity-driven vacuum pumps to regenerate them. While simple and easy to fabricate, these designs are not scalable and cannot use heat to regenerate them …

Artificial Neural Networks As The Solution Of Inverse Heat Conduction Problems In Multidimensional Domains, Andrea Carolina Martinez Mundarain

Theses and Dissertations

Surface heat flux measurement is essential in various industrial applications including atmospheric entry of space vehicles, machining processes, non-destructive testing and more. While direct measurement of surface heat flux is known to be a very difficult, if not infeasible, task, acquiring temperature measurement from sub- surface locations are often viable. The problem of evaluating the surface heat flux using internal temperature measurements is known as an inverse heat conduction problem (IHCP). IHCPs are considered as mathematically ill-posed as they are highly sensitive to measurement error. This research presents a solution based on the implementation of artificial neural networks (ANNs) to …

Fabrication And Performance Demonstration Of Compact Adsorption Heat Pump, Faraz Ege

Theses and Dissertations

Addressing global environmental concerns requires a shift to eco-friendly energy sources, particularly in cooling applications where traditional vapor-compression systems rely on harmful refrigerants and electricity. Thermally-driven cooling systems, like adsorption heat pumps, offer promise with their environmentally friendly refrigerants such as water and use of low-temperature heat sources, including solar energy or waste industrial heat. This dissertation undertakes a comprehensive investigation into the development and optimization of compact adsorption heat pumps, aiming to address the efficiency and environmental challenges inherent in conventional cooling systems.

This research begins by introducing a novel insertion coating technique for fabricating MIL-101 (Cr) adsorbent layers …

Thermal Conductivity Of Thin Porous Ceramic Coatings: An Analytical And Experimental Study, Lei Zhao

Theses and Dissertations

An analytical model of the thermal conductivity of the porous yttrium-stabilized zirconia (YSZ) layer used in the thermal barrier coatings (TBCs) is presented. Such high-temperature resistant coatings are essential to protect the metallic components of gas turbine engines. The model calculates the conductivity based on the coating's porosity, pore size distribution, and pore morphology, including the individual pore cross-section area, aspect ratio, and orientation, which are extracted from the scanning electron microscopy images. The model was verified through comparisons with numerical simulation results from a multiphysics software tool. A laser temperature gradient test was performed to validate the analytical model …

Measuring Soot In A Novel Configuration For Diffusion Flames Fueled By Ethylene Doped With Iso-Dodecane, Christian Bjork

Honors Scholar Theses

Sustainable Aviation Fuels (SAFs) are seen as the path forward for decarbonizing hard-to-electrify sectors. Using SAFs over traditional fossil fuels abates carbon dioxide emissions but still may present soot emission problems. A milestone in the abatement of soot would be understating its formation mechanisms.

This study aims to quantify soot products resulting from an ethylene flame doped with iso-dodecane, a surrogate SAF component. The burner selected for the investigation is the novel Planar Mixing Layer Flame (PMLF) which allows the tracking of soot formation with the height above the burner (HAB) in a stable diffusion flame. A baseline ethylene-fueled flame …

Thermal Performance Investigation Of Thermoelectric Cooling System With Various Hot-Side Cooling Methods, Bowo Y. Prasetyo, Parisya P. Rosulindo, Fujen Wang

Makara Journal of Technology

Thermoelectric devices have been widely used in various applications, including cooling and power generation. The potential application of thermoelectric cooling systems has been studied. However, these systems still face challenges in achieving optimal performance compared with other cooling systems. Several factors, including the hot-side cooling method, influence the performance of thermoelectric systems. This study aimed to investigate the effects of different hot-side cooling methods on the thermoelectric performance and thermal behavior of thermoelectric cooling systems. The testing methods involved the combination of the thermoelectric module with five hot-side heat exchangers, including a square heatsink, a round heatsink, a two-pipe heat …

Radiative Cooling For Energy-Efficient Power Generation, Rickia Hanna

Celebrating Scholarship and Creativity Day (2018-)

This thesis examined radiative cooling on a small scale using a hybrid photovoltaic/radiative cooling model system, to determine its efficiency for large-scale power generation. Radiative cooling is concerned with heat transfer and this thesis’s main goal is to harness that heat energy to produce electricity. The efficiency of the system was tested using various light sources at different angles and total power output. The testing was done several times and there proved to be a proportional relationship between light intensity and current output. However, due to the performance threshold of the PTEC module, the component of the system used to …

Analysis Of Close Contact Melting, Mohana Durga Gurunadhan

LSU Master's Theses

This report presents a numerical transient analysis of Close Contact Melting (CCM), intended to help in accurate prediction of melt rate and interface configuration, which is to be utilized for a prospective frozen propellant based propulsion system. Three different substrate shapes namely- Flat, Cylindrical and Wedge, are chosen for the study. The domain discretization is based on generation of boundary fitted mesh and the time varying physical domain is transformed to a fixed computational domain, wherein the associated governing equations are solved. Apart from the conventional linear system solvers, an algebraic multigrid based solver is implemented. A non-iterative implicit/explicit melt …

Obliquely Impinging Jet Heat Transfer Fields: Effects Of Mach Number On Nozzle-To-Plate Distance, Thinnesh Ragupathy

Masters Theses

This study investigates the consistent features of heat flux patterns on surfaces impacted by jets at various Mach numbers, ranging from 0.1 to 1.0. It utilizes temperature-sensitive paint (TSP) analysis to examine how these patterns change. The research also explores the presence of self-similarity in both the fluctuation of heat flux and skin friction patterns, which are derived from temperature and heat flux data. A semi-empirical model is proposed to explain this self-similarity, suggesting that Mach number primarily affects heat flux patterns through the recovery temperature at the impact site.

Understanding the self-similarity of heat flux patterns across different Mach …

Development Of On-The-Fly Quasi-Steady State Approximation For Chemical Kinetics In Cfd, Abhinav Balamurugan

Doctoral Dissertations and Master's Theses

This study analyzes the feasibility of On-The-Fly Quasi-Steady-State Approximation (OTF-QSSA) application for solving chemical kinetics within Computational Fluid Dynamics (CFD) simulations, aiming to reduce the computational demand of detailed mechanisms. An algorithm that dynamically identifies and designates Quasi-Steady-State (QSS) species at specific grid locations and instances during the simulation was developed. With this information, our method pseudo-delays the advancement of concentrations for these QSS species—effectively setting their rate of concentration change to zero for a set number iteration before updating using the detailed mechanism and thereby omitting the computationally intensive processes typically required for their calculation during those skipped iteration. …

Benchmarking Of A Sco2 Heat Exchanger Flow Loop, David Velasco

Doctoral Dissertations and Master's Theses

Heat transfer of supercritical carbon dioxide (sCO2) was studied experimentally by commissioning a sCO2 flow loop featuring a horizontal tube-in-tube counterflow heat exchanger with a circular cross section. The main objective was to establish experimental heat transfer research capabilities for sCO2 at Embry-Riddle Aeronautical University’s (ERAU) Thermal Science Lab. sCO2 experiences a drastic change in thermophysical properties near its critical point that results in unique heat transfer characteristics. The high pressures at which sCO2 exists make the large gradients in thermophysical and transport properties difficult to study, experimentally and numerically. However, understanding the heat transfer characteristics and thermophysical behavior of …

Performance Augmentation Of Single-Slope Solar Distiller Using An Evacuated Tube Solar Collector: Theoretical Study, Eman Mohammed Abuelezz Eng., Yasser El-Samadony Prof., Khaled Khodary Esmaeil Assoc. Prof., Mohamed Elsheshtawy Zayed Dr.

Journal of Engineering Research

In this research, the performance analysis of a solar-powered desalination system incorporating a single slope-slope solar still and an evacuated tube solar collector is theoretically investigated. The system comprises a solar evacuated tube that absorbs solar radiation, transferring heat to saline water. This water then flows into a solar still, where it absorbs solar energy, boosting the evaporation rate. Two solar distillers, namely the conventional solar distiller (Still-I) and solar still integrated with evacuated tube solar collector (Still-II), are simulated and analyzed under identical outdoor conditions in Tanta, Egypt. A comprehensive theoretical model, developed using FORTAN programming, simulates the performance …

Finite Element Analysis Of Thermal-Mechanical Instabilities In Nonmetallic Friction Composite Material, Joseph-Shaahu Shaahu

Electronic Theses and Dissertations

Thermal-mechanical instability (TMI) has been a research topic of interest as it focuses a lot on transportation systems. Thermal-mechanical instability was first noticed in railway and experimentally studied with a pin-to-pin or pin-to-surface setup of sliding contact. The topic has been extended into brakes and clutches which are two of the most common sliding systems most susceptible to thermal buckling and thermoelastic instability (TEI), where thermal buckling and thermoelastic instability are two sub-categories of thermal-mechanical instability. Thermal-mechanical instability is an ongoing research to better understand the phenomenon and the limits at which such instability occurs. This work delved into the …

Exhaust Manifold Pressure As Engine Tuning Parameter, Kieran Truth Cunningham, Adam Sullivan Mathews, Connor Richard Smullen

Mechanical Engineering

In this project, the exhaust manifold absolute pressure (EMAP) of a 1986 Toyota Corolla was analyzed across a variety of load cases and was compared with the mass air flow (MAF) of the intake, simultaneously. Correlations were found in the trends of EMAP and MAF sensor readings that may prove helpful in tuning engines that have difficulty in accommodating a MAF sensor. These correlations were found in areas of the powerband where aftermarket tuned engines typically have poor airflow sensing. An equation was developed to spoof MAF input using EMAP and other engine operating parameters.

Investigation Of The Effect Of Internal Reynolds Number And Advective Capacity Ratio On Gas Turbine Film Cooling Parameters, John P. Di Lella

Theses and Dissertations

The desire for more powerful engines drives higher turbine inlet temperatures and a greater need to cool them. Experimentalists attempt to match cooling effectiveness between two conditions by matching several non-dimensional parameters, one of which is the coolant warming factor. The first investigation of this study examines the effect of the internal Reynolds number and the advective capacity ratio on the coolant warming factor by making use of a computational model and four different gases. It indicates the non-negligible and opposing effects of external convection and solid conduction on the coolant warming factor at matched internal Reynolds number and advective …

Liquid Nitrogen Shrink-Fitting Process, Natalie Harvey

The Journal of Purdue Undergraduate Research

No abstract provided.

Enhancing The Performance Of Conventional Solar Still Using The Nano-Doped Paint (Ndp) Coating, Hagar Alm-Eldin Bastawissi Prof.Dr, Nermin Elgendy Engineer, Ayman R. El-Tohamy

Journal of Engineering Research

Nations are throughout the entire globe continuously confronting the problem of potable water shortage. Recently, it has been thought that using solar energy to desalinate brackish water offers a practical answer to the world's water crises. The output of these stills, is meager, and academics haven't done much to boost it in any way. Solar distillers have been proposed as an efficient method to produce potable water. In recent years, saltwater has produced drinking water by various ways. The efficiency of a solar distiller is significantly influenced by various factors, most important factor of them is the absorber surface. In …

A Path To Commissioning Of Direct-To-Chip Liquid Cooling For Hyperscale Data Centers Using Experimental And Cfd Techniques, Himanshu Girishchandra Modi

Mechanical and Aerospace Engineering Dissertations - Archive

The escalating demand for computing power in hyperscale data centers necessitates innovative cooling solutions to enhance energy efficiency and ensure sustainable operations. Direct-to-chip liquid cooling has emerged as a promising alternative to traditional air-cooling methods, offering improved thermal management and reduced energy consumption. This dissertation explores a comprehensive approach to commissioning direct-to-chip liquid cooling systems in hyperscale data centers by integrating experimental analyses and Computational Fluid Dynamics (CFD) techniques. The study begins by examining design modifications for air-cooled servers and later analyzes the impact of different parameters for a hybrid-cooled server. It explores the fundamental principles of direct-to-chip liquid cooling …

Mathematical Modeling Of Heat And Mass Transfer In Multilayer Systems, Girish Krishnan

Mechanical and Aerospace Engineering Dissertations - Archive

Multilayer systems are commonly found in a number of engineering devices like Li-ion cells and vertically integrated semiconductor devices. Li-ion cells are widely used for various engineering applications, but they come with a drawback in the form of thermal runaway, and thermal abuse is one of the scenarios that leads to thermal runaway. On the other hand, heterogenous integration in chip and package level architectures is being implemented to keep up with Moore’s law. Modeling of heat and mass transfer in these systems is a topic of interest to improve performance and reliability.

The first segment of this dissertation will …

Dynamics Of Separated Flows In Diffusers With Vortex Generators, Sandeep Eldho James

Mechanical and Aerospace Engineering Dissertations - Archive

Flow through curved diffusers is complicated due to the possibility of flow separation and secondary flows. Vortex generators (VGs) are a class of passive flow separation control devices used to improve the flow quality in curved diffusers by suppressing flow separation. However, the literature review demands an in-depth investigation on the physical mechanisms related to flow separation control. Thus, this study aims to improve the understanding of the underlying flow physics associated with VG-induced flow separation control in confined flows. The chosen geometry for this study is a well-documented asymmetric diffuser which exhibits a mild flow separation.

The theoretical formulation …

Machine Learning-Based Methodology For Multi-Objective And Multi-Design Variable Optimization Of Finned Heat Sinks And Evaluation Of Electrochemical Additive Manufactured Heat Sink Designs For Single-Phase Immersion Cooling, Joseph F. Herring Ii

Mechanical and Aerospace Engineering Dissertations - Archive

Traditional air-cooling along with corresponding heat sinks are beginning to reach performance limits, requiring lower air-supply temperatures and higher air-supply flowrates, in order to meet the rising thermal management requirements of high power-density electronics. A switch from air-cooling to single-phase immersion cooling provides significant thermal performance improvement and reliability benefits. When hardware which is designed for air cooling is implemented within a single-phase immersion cooling regime, optimization of the heat sinks provides additional thermal performance improvements. This work investigates performance of a machine learning (ML) approach to building a predictive model of the multi objective and multi-design variable optimization of …

Design And Analysis Of Electrochemical Additive Manufacturing Based Cold Plates And Heat Sinks For Enhanced Electronics Cooling And Temperature-Dependent Density Characterization Of Phase Change Materials, Jacob Lamotte-Dawaghreh

Mechanical and Aerospace Engineering Dissertations - Archive

The body of work that comprises this dissertation is divided into two main sections. The first section is regarding novel heat sink and cold plate designs that leverage a metal additive manufacturing process called electrochemical additive manufacturing (ECAM) to drive increased thermal performance. The continuous advancements in electronics computational capabilities have resulted in ever-increasing thermal loads at the component and data center server level. These strides within the field are soon to be compounded by the rise of artificial intelligence and machine learning technologies. Traditionally, high performance electronics components have been able to be cooled by forced-air cooling; however, the …

Carbon Dioxide Gasification Of Biochar: A Study On Utilizing Captured Co2 To Mitigate Greenhouse Gas Emission And Improving Carbon Conversion Efficiency, Nnamdi Ofuani

College of Graduate Studies: Theses & Dissertations

With rapidly growing global economies and world population, fossil fuel continues to play a major role in meeting current energy demands. Carbon capture and storage (CCS) technologies have, hence, been implemented to reduce CO₂ emissions in the atmosphere. With the implementation of CCS technologies comes the need to utilize the captured CO₂. This research, therefore, proposes CO₂ gasification of biochar as a viable carbon utilization pathway. With captured CO₂ coming at various concentrations, there is a need to understand how CO₂ concentration affects biochar conversion to useful products. This study, therefore, evaluates the effects …

Identifying Savings In Residential Electricity Consumption Through Data-Driven Analysis, Scott J. Maurer

Dartmouth College Master’s Theses

Climate change and rising electricity demand have driven the need for energy efficiency in buildings. Single-family residential buildings present opportunities for improvement, but current strategies for identifying savings are labor and capital-intensive. Developing a residential version of a virtual energy audit tool offers a cheaper, non-intrusive alternative. This study used 25 all-electric homes in Florida to refine algorithms from the previously developed EDIFES code, originally designed for commercial buildings. The analysis utilized one year of 15-minute electricity consumption, area, stories, and location. These markers include heating and cooling type, setpoint set back, HVAC load, pool pump load, refrigeration load, and …

Fluid Flow And Thermal Performance Investigation Of Twisted Elliptical Tubes For Use In High Prandtl Number Systems, Connor F. Donlan

Theses and Dissertations

The development of clean energy systems is paramount to reducing mankind's climate impact. These clean energy systems include solar, wind, and nuclear power where nuclear power shows a reduced lifetime carbon dioxide footprint per kilowatt hour compared to other sources [102]. Advanced nuclear reactors, fusion energy systems, and concentrated solar power designers are looking at using molten salt heat transfer fluids and improved heat exchanger design to increase power production and efficiency of clean energy systems. The improving heat transfer within the main heat transfer components within advanced nuclear reactors will enable increased efficiencies and power production.

Heat transfer improvements …