Heat Transfer, Combustion Commons^™

The Regeneratively Cooled Engine Development (R.E.D.) Project, Joseph Traverso, Sharjeel Malik, Ford Catlin

Discovery Day - Daytona Beach

The Experimental Rocket Propulsion Lab (ERPL) is a student-run organization dedicated to designing, building, and testing experimental rocket engines. With ERPL transitioning toward flight vehicles, developing engines with longer burn times is critical to future club success. One limitation to burn time is an engine’s ability to withstand extreme combustion temperatures, typically in excess of 5000 F. ERPL engines have found success with passive cooling techniques such as ablative, heatsink, and film cooling, but these techniques aren’t suitable for extended burn times. Therefore, ERPL has created the Regeneratively cooled Engine Development (R.E.D) project, with the objective to design, analyze, and …

Turbine Aerodynamics And Performance Characterization, Anuranan Bharadwaj, Kalkamanali Satvaldy, Vincent Shi

Discovery Day - Daytona Beach

This research presents an integrated study combining computational modeling and experimental validation to enhance the design and performance characterization of small-scale turbine systems. The theoretical component focuses on developing an object-oriented Python code for the preliminary design and performance prediction of radial turbines, capable of generating velocity triangles, thermodynamic properties, and geometric parameters from user-defined inputs. The tool employs Whitfield-based correlations and fundamental gas-dynamic relations to estimate exit flow parameters, work ratio, and efficiency, offering flexibility for expansion into geometry export and CAD integration.   Complementing the computational model, the experimental component aims to improve the aerodynamic testing capabilities of the …

Modeling Seiche Oscillations Using Damped Vibration Differential Equations, Sharjeel Malik, Justin Della

Discovery Day - Daytona Beach

Combustion instability in liquid rocket engines is driven by coupling acoustic pressure oscillations and unsteady heat release. To achieve specific desired outcomes, small perturbations can be made to either decay or grow, depending on system dynamics and artificial parameters. Using a linearized eigenvalue framework, where eigenvalues determine growth/decay rates and frequencies, and eigenvectors describe spatial mode shapes and couplings between pressure, velocity, and heat release, a mathematical model can be derived to describe said behavior for a cross-section of the rocket engine. The Rayleigh criterion is used to identify conditions under which energy is added to oscillations, while flame transfer …

A Differential Equation Approach To Heat Flow In A Thin Rod, Alexandria Krol, David Cardona, Collin Petrie

Discovery Day - Daytona Beach

A Differential Equation Approach to Heat Flow in a Thin Rod examines how differential equations can be used to model and understand heat conduction in a fundamental physical system. Heat transfer in solids is a key concept in physics and engineering, particularly in systems where temperature changes over time. A thin rod provides a useful one-dimensional model for studying how heat moves through a material and how temperature varies along the rod as time passes. The primary objective is to develop a mathematical description of this process using differential equations. The analysis begins with physical principles such as conservation of …

The Spice (Sustainable, Physics-Inspired Culinary Education) Lab – A Digestible Few-Nexus Educational Platform, Carla Ramsdell

National Collaborative for Research on Food, Energy, and Water Education (NC-FEW)

The SPICE (Sustainable, Physics-Inspired Culinary Education) Lab is a unique educational platform that enables participants from a wide disciplinary background to engage and become literate in the unique connections between food, energy and water. This small but mighty space allows for outreach education in many formats, including formal college courses, university-centered hands-on activities and public outreach.

The work performed in this space fills a unique need in the FEW-Nexus education opportunities because it is adaptable to many learners and learning opportunities and its focus on kitchen science makes these concepts approachable which can later be expanded to understand other critical …

In-Situ Thermal Measurement Of Polymers, Carson Powers, Jungkyu Park, Dal Hyung Kim, Fahim Dorsey, Peter Bearden

Symposium of Student Scholars

In this research, we conducted a detailed experimental

investigation into how strain affects the thermal conductivity of

Ecoflex elastomer, utilizing a newly developed method for

measuring thermal conductivity under mechanical strain for the

first time. In situ thermal conductivity measurement apparatus

was developed by combining the KLA T150 nanoscale tensile tester

and a custom-fabricated thermal measurement sensor. The

development of an experimental method for measuring the thermal

conductivity of nanomaterials under mechanical testing

simultaneously will contribute to the development of novel

materials for flexible electronics by helping us to better

understand the strain effect on their thermal performance.

Interestingly, the …

Novel Thermal Coating For High-Speed Airplanes, Abinash Satapathy, Lakshay Battu, Liam Watson, Nazanin Rajabi

Symposium of Student Scholars

In comparison to various other materials, Carbon Fiber, specifically Carbon Fiber Reinforced Polymers (CFRP), is pre-eminent amongst other materials for use on aeronautical systems. Due to its high specific strength (strength-to-weight ratio), CFRP is prominent for carrying heavy loads while maintaining a lightweight build. However, when influenced by heat resulting from air resistance, CFRP is known to undergo serious degradation that would significantly decrease the effectiveness of the polymers. To prevent this degradation and maintain the strength of the CFRP, thermal protective layers (TPLs) are designed to shield the CFRP from heat exposure. This research is focused on the examination …

Adaptable Clean Energy Laboratory, Joao Marcelo Rocha Belmonte, Marc D. Compere

Sustainability Conference

The Adaptable Clean Energy (ACE) Lab is a real-world, long term, test platform that will guide the courses of the Energy Systems track. The lab will provide realistic electrical and HVAC loads that mimic a solar powered office. The lab is a 20’ high cube shipping container modified with a door, windows, lights computers, air conditioner and appliances. The lab is Net-Zero and powered entirely from the sun. Two insulation test sections expose the exterior walls for research access to real external heat loads in a real building

Residential Thermal Storage And Cooling, Joao Marcelo Rocha Belmonte, Jacob Anderson, Andrew Clarke, Daphne Forester, Bianca Hardtke, Josh Hartman, Marc D. Compere

Sustainability Conference

No abstract provided.

Graphs And Cad: Analyzing The Experience Of A Mechanical Engineering Intern, Matthew Des Biens

Celebration of Learning

A reflection on the experiences of a mechanical engineering intern at Bergstrom Inc., this presentation, by Senior Matt Des Biens, will discuss what it was like working for a manufacturing and design company making HVAC units for large customers across the world. The highlights will be on the projects he worked on, the things that he learned, and his views on working for the company as a whole.

Waste Heat Recovery From A Vented Electric Clothes Dryer Utilizing A Finned-Tube Heat Exchanger, Abdul Raheem A. Shaik, Stephen L. Caskey, Eckhard A. Groll

The Summer Undergraduate Research Fellowship (SURF) Symposium

Conventional residential clothes dryers continuously vent moist, hot air during the drying process. The vented air leaves the home but still has useful temperature and humidity that could be recovered to offset other heating demands in the home. A study is carried out to quantify the amount of heat extracted from the waste heat stream of a conventional, vented clothes dryer. To extract the heat, a water cooled, fin-and-tube heat exchanger is located within the exhaust duct. A steady state thermodynamic dry coil and wet coil model was built in Engineering Equation Solver (EES). The model accounts for the heat …

Thermophotovoltaic Devices: Combustion Chamber Optimization And Modelling To Maximize Fuel Efficiency, Arnold Chris Toppo, Ernesto Marinero, Zhaxylyk Kudyshev

The Summer Undergraduate Research Fellowship (SURF) Symposium

Currently, 110 billion cubic meters of natural gas (primarily methane), a potent greenhouse gas, are flared off for environmental and safety reasons. This process results in enough fuel to provide the combined natural gas consumption of Germany and France. The research team developed a thermophotovoltaic device to convert thermal energy to electricity at a high efficiency using proprietary emitters and combustion system. With the current focus being fuel efficiency and the combustion process, the assembly was simulated using ANSYS Fluent modelling software and the following parameters were optimized: air/fuel ratios, flow rates, and inlet sizes. Simultaneously the heat transfer across …

Study Of The Effective Thermal Conductivity Of Polymer Composites With Varying Filler Arrangements, Debraliz Isaac Aragones, Rajath Kantharaj, Aaditya Candadai, Amy Marconnet

The Summer Undergraduate Research Fellowship (SURF) Symposium

Alternative thermal management solutions for electronic devices are being widely explored due to the increasing heat concentration that results from shrinking sizes and increasing power of modern electronics. Clearly, there is a need to spread the heat effectively in these systems, and polymer composites can potentially provide high thermal conductivity at low filler fraction while maintaining desirable mechanical properties for electronic packaging. The present study aims to investigate the effective thermal conductivity of various copper filler arrangements in a polymer matrix. The polymer composites are fabricated using laser cut acrylic templates to embed aligned copper rods in epoxy and create …

Investigating Different Modeling Techniques For Quantifying Heat Transfer Through Building Envelopes, Sodiq Akande

Appalachian Student Research Forum

There is interest concerning the energy performance of buildings in the United States. Buildings, whether residential, commercial or institutional, generally underperform in terms of energy efficiency when compared to buildings that are constructed following sustainably and energy efficiency standards. A substantial percentage of energy loss in these buildings is associated with the thermal efficiency of its envelope (exterior walls, windows roof, floors and doors). The objective of this study will evaluate the results of three energy modeling techniques developed to investigate the energy transfer through the envelope of existing campus buildings. The techniques employed are solving the heat transfer calculations …

Spectral Phonon Relaxation Time Calculation Tool Based On Molecular Dynamics, Divya Chalise, Tianli Feng, Xiulin Ruan

The Summer Undergraduate Research Fellowship (SURF) Symposium

Thermal conductivity is an important material property which affects the performance of a wide range of devices from thermoelectrics to nanoelectronics. Information about phonon vibration modes and phonon relaxation time gives significant insight into understanding and engineering material’s thermal conductivity. Although different theoretical models have been developed for studying phonon modes and relaxation time, extensive knowledge of lattice dynamics and molecular dynamics is required to compute phonon modal frequencies and relaxation times. Therefore, a computational tool which can take simple inputs to calculate phonon mode frequencies and relaxation time will be beneficial. Through this research work, such computational tool has …

Numerical Simulations Of Transcritical Natural Convection, Ruiwen Wei, Carlo Scalo, Mario Tindaro Migliorino, Kukjin Kim, Jean-Pierre Hickey

The Summer Undergraduate Research Fellowship (SURF) Symposium

In modern engineering applications, system overheating is a key issue that needs to be solved with efficient and reliable cooling technologies. Among the possible mechanisms that these are based on, natural convection cooling is one of the most frequently employed, with applications ranging from cooling of computer micro-components to large nuclear reactors. While many studies have been performed on natural convection employing supercritical or subcritical fluids, little attention has been given to fluids in their transcritical regime. The latter has the potential to yield high performances while avoiding detrimental effects of two-phase systems (e.g. cavitation). In the present study, 2D …

Modal Phonon Transport Across Interfaces By Non-Equilibrium Molecular Dynamics Simulation, Yang Zhong, Tianli Feng, Xiulin Ruan

The Summer Undergraduate Research Fellowship (SURF) Symposium

Phonons represent the quantization of lattice vibration, responsible for heat transfer in semiconductors and dielectrics. Phonon heat conduction across interfaces is crucially important for the thermal management of real-life devices such as smartphones, electric vehicles, and satellites. Although recent studies have broadly investigated spectral phonon contribution to lattice thermal conductivity, the mechanism of phonon modal transport across interfaces is still not well-understood. Previous models, including the acoustic mismatch model (AMM) and diffuse mismatch model (DMM), only consider elastic process while neglecting inelastic phonon contributions. Herein, we employ spectral Non-Equilibrium Molecular Dynamics Simulation (NEMD) to probe the temperature and heat flux …

Secondary Atomization: Drop Breakup In A Continuous Air Jet, Grant S. Sondgeroth, Longchao Yao, Catriona M.L. White, Daniel R. Guildenbecher, Jun Chen, Paul E. Sojka

The Summer Undergraduate Research Fellowship (SURF) Symposium

Understanding drop breakup will optimize aircraft engine performance, reduce agro-chemical overspray, and improve pharmaceutical tablet efficacy. Large fuel fragments in engines lead to lowered fuel economy and higher pollutant emissions, while small drops yield more agro-spray drift into surrounding residential and environmental zones. Better pharmaceutical tablets will improve drug uptake and patient comfort.

Engineers and scientists are currently unable to predict the number, size, and velocity of fragments formed during important drop breakup processes. Therefore, we are required to measure these quantities. We use digital inline holography (DIH) to record three-dimensional diameter and position data for fragments formed during multi-mode …

Burning Surface Temperature Measurements Of Propellants And Explosives Using Phosphor Thermography, Ethan A. Whitaker, Alex D. Casey, Steven F. Son

The Summer Undergraduate Research Fellowship (SURF) Symposium

Temperature measurements of propellants and explosives are necessary to create accurate models which lead to better understanding of energetic characteristics such as burning rate. Previous attempts at measuring surface temperatures of burning propellants and explosives using thermocouples have suffered from large uncertainty. Thermographic phosphor thermography employs ceramic powders called phosphors whose spectroscopic properties can be used to remotely and nearly non-intrusively measure temperature. Improved methods were developed for application of this technique to energetic materials to yield more accurate, two-dimensional temperature measurements. In this study, zinc oxide doped with gallium, a thermographic phosphor, was mixed into HMX and RDX powder, …

Numerical Simulation On The Combustion Characteristic Of Iron Ore Sintering With Flue Gas Recirculation, Gan Wang, Zhi Wen, Guofeng Lou, Ruifeng Dou, Xunliang Liu, Fuyong Su, Sizong Zhang

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Numerical Simulation Of The Through Process Of Aerospace Titanium Alloy Casting Filling, Solidification, And Hot Isostatic Pressing, Jian-Xin Zhou, Zhao Guo, Ya-Jun Yin, Chang-Chang Liu

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Integration Of Advanced Simulation And Visualization For Material Processing, Chenn Zhou

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Modeling Of A Roll-To-Roll Plasma Cvd System For Graphene, Yudong Chen, Majed A. Alrefae, Anurag Kumar, Timothy S. Fisher

The Summer Undergraduate Research Fellowship (SURF) Symposium

Graphene is a 2D carbon material that has extraordinary physical properties relevant to many industrial applications such as electronics, oxidation barrier and biosensors. Roll-to-roll plasma chemical vapor deposition (CVD) has been developed to manufacture graphene at large scale. In a plasma CVD chamber, graphene is grown on a copper foil as it passes through a high-temperature plasma region. The temperatures of the gas and the copper foil play important roles in the growth of graphene. Consequently, there is a need to understand the temperature and gas velocity distributions in the system. The heat generated in the plasma creates a thermal …

Fluid Flow Thermometry Using Thermographic Phosphors, Gabriel J. Fenoglio, Humberto J. Detrinidad, Aman Satija, Alex D. Casey, Robert P. Lucht, Terrence R. Meyer

The Summer Undergraduate Research Fellowship (SURF) Symposium

Phosphor thermometry is a non-intrusive thermometry technique that allows for spatially and temporally resolved surface temperature measurements. The thermographic method has been employed in a number of applications that include combustion, sprays, and gas flows. In the current work, we investigate the implementation of thermographic phosphors in liquid flows, which is of interest in a wide range of applications in heat transfer, fluid mechanics, and thermal systems. Zinc oxide doped with Zinc (ZnO:Zn) was the phosphor employed for experimentation due to its high emission intensity and insolubility. In order to explore this application, the phosphor powder was uniformly dispersed in …

Effect Of Aggregation And Particle Size On The Thermal Conductivity Of Nickel-Epoxy Nanocomposites, Jacob M. Faulkner, Xiangyu Li, Xiulin Ruan Dr.

The Summer Undergraduate Research Fellowship (SURF) Symposium

Microprocessor advancements have been stunted in recent years by inadequate means of heat dissipation as power continues to grow and size continues to shrink. One way to increase thermal conductivity while maintaining electrical insulation is to add metal nanoparticles to a polymer matrix. This cheap material has become a popular thermal interface for this reason. However, optimization of the interface is dependent upon a number of factors including particle size, shape, orientation, and aggregation. Various theoretical models and numerical approximations have been developed to find the effective thermal conductivity of such nanocomposites, but none has been able to fully incorporate …

Relative Contributions Of Inelastic Phonon Scattering And Elastic Phonon Scattering To Thermal Boundary Conductance Across Solid Interfaces, Mengxi Zhao, Zexi Lu, Xiulin Ruan

The Summer Undergraduate Research Fellowship (SURF) Symposium

The knowledge of inelastic phonon scattering is crucial for the understanding of thermal boundary conductance across solid interfaces. Several traditional theoretical models such as the acoustic mismatch model (AMM) and the diffuse mismatch model (DMM) assume that the elastic phonon scattering drives the thermal transport across the interface. But there are experiments indicating that the inelastic phonon scattering plays an important part in the interfacial thermal energy conduction as well. We use nonequilibrium molecular dynamics (NEMD) to predict the inelastic phonon conductance across Cu/Si interface. Temperature distribution across Cu/Si interface has been obtained from the simulation results, and a temperature …

Investigation Of Aluminum Foams And Graphite Fillers For Improving The Thermal Conductivity Of Paraffin Wax-Based Phase Change Materials, Javieradrian Ruiz, Amy Marconnet, Yash Ganatra, John Howarter, Alex Bruce

The Summer Undergraduate Research Fellowship (SURF) Symposium

Passive thermal management with phase change materials (PCMs) has become the one of the most promising methods to cool cell phone processors due to the relatively simple implementation and profound impact on processor temperatures. Enhancing the thermal properties of conventional PCMs, mainly thermal conductivity and latent heat storage, allows for an overall improved thermal management system. This study aims to improve the thermal conductivity of paraffin wax (a typical commercial PCM) by the introduction of an expanded graphite (EG) filler to form a paraffin wax composite, and then infiltration of the EG/paraffin composite into an aluminum foam matrix. The thermal …

Fiber-Optic Imaging In An Internal Combustion Engine Test Rig, Conor Martin, Michael Smyser, Aswin Ramesh, Greg Shaver, Terrence Meyer

The Summer Undergraduate Research Fellowship (SURF) Symposium

The formation of particulate matter (PM/soot), nitrogen oxides (NOx), and other byproducts of the combustion process in diesel engines is controlled by spatiotemporally varying quantities within the engine cylinders which traditional sensors cannot resolve. This study explores the use of an advanced sensing technique using an optical probe which can be used to produce highly spatiotemporally resolved in cylinder images of the flame formation during the combustion stroke. Using a fiber optic cable and custom lensing system adapted to fit a pre-existing pressure transducer port, light from within the cylinder can be transmitted through the imaging probe to a high …

Improvement Of Diesel Engines At High Speeds Via Flexible Valve Actuation And Cylinder Deactivation, Dina M. Caicedo Parra, Gregory M. Shaver, Aswin Ramesh

The Summer Undergraduate Research Fellowship (SURF) Symposium

In the U.S fuel consumption is expected to increase over 20% from 2010 to 2020 especially in the heavy duty segment. As a consequence of the increase in production of heavy and light duty vehicles, regulations and stricter policies are being applied to the emissions of pollutants, including NOx, and soot. This study outlines strategies for using cylinder deactivation and intake valve closure (IVC) modulation to improve fuel economy and increase the rate at which NOx/soot-mitigating aftertreatment devices reach working temperatures. Effects of opening and squeezing variable geometry turbine (VGT) turbocharger were also analyzed. From the results it was observed …

Assessment Of Critical Technologies For Gas Turbine Engines Using Numerical Tools, Vinicius Pessoa Mapelli, Guillermo Paniagua, Jorge Sousa

The Summer Undergraduate Research Fellowship (SURF) Symposium

In 2014 gas turbine engine has reached a market value of 82.5 billion dollars, of which 59.5% are related to aircraft propulsion. The continuous market expansion attracts more and more the interest of researchers and industries towards the development of accurate numerical techniques to model thermodynamically the entire engine. This practice allows a performance and optimization analysis before the actual experimental testing, reducing the time and required investment in the design of a new engine. In this paper, a recently developed open source numerical tool named “Toolbox for the Modeling and Analysis of Thermodynamic Systems” (T-MATS) is used to assess …