Heat Transfer, Combustion Commons^™

High Temperature Heat Exchanger Annual Report, Anthony Hechanova

Publications (NSTD)

Objectives

• Identify candidate materials for heat exchanger components.

• Test candidate materials for heat exchanger components.

• Design critical components in the interface between the reactor and hydrogen production plant and within the sulfur iodine thermochemical process.

• Fabricate prototypical components.

• Test prototypical components.

International Energy Agency Bestest For Ground Coupled Heat Transfer, Joel Neymark, Ron Judkoff, Michael Crowley

Reports

The objective of this project is to assess the accuracy of building energy analysis tools that have incorporated detailed models for predicting ground-coupled heat transfer related to floor slab and basement constructions. An executive summary is to be found in the main report.

Laser-Induced Fluorescence And Performance Analysis Of The Ultra-Compact Combustor, Patrick J. Lakusta

Theses and Dissertations

The AFIT Combustion Optimization and Analysis Laser (COAL) lab’s modular design and state-of-the-art diagnostic systems make it a flexible and important facility for the analysis of combustion processes. The objectives of the current research are to install several enhancements in the lab, validate the laser diagnostic system, characterize the igniter for AFIT’s Ultra-Compact Combustor (UCC) sections, and perform a non-intrusive laser diagnostic, performance, and high-speed video analysis of a flat-cavity UCC section. Validation of the laser system was accomplished using OH Planar Laser-Induced Fluorescence (PLIF) in a laminar hydrogen-air flame produced by a Hencken burner. Results are compared to previous …

Heat Transfer Due To Unsteady Effects As Investigated In A High-Speed, Full-Scale, Fully-Cooled Turbine Vane And Rotor Stage, Jonathan R. Mason

Theses and Dissertations

Experiments were conducted to examine the effects of film cooling on a gas turbine engine’s high‐pressure turbine section. The focus for this effort was in the tip/shroud region of a rotor stage and a high pressure turbine vane. A primary goal was to understand the unsteady flow effects. Attempts were also made to characterize the effects as caused by the fully‐cooled rotor stage. Data for this investigation was taken at the U.S. Air Force’s Turbine Research Facility (TRF), a transient blowdown facility with instrumentation fitted to a full‐scale, high‐speed, fully‐cooled vane and rotor stage of proprietary design. Measurements of pressure, …

The Impact Of Heat Release In Turbine Film Cooling, Dave S. Evans

Theses and Dissertations

The Ultra Compact Combustor is a design that integrates a turbine vane into the combustor flow path. Because of the high fuel-to-air ratio and short combustor flow path, a significant potential exists for unburned fuel to enter the turbine. Using contemporary turbine cooling vane designs, the injection of oxygen-rich turbine cooling air into a combustor flow containing unburned fuel could result in heat release in the turbine and a large decrease in cooling effectiveness. The current study explores the interaction of cooling flow from typical cooling holes with the exhaust of a fuel-rich well-stirred-reactor operating at high temperatures over a …

Modeling Of Thermodynamically Coupled Reaction-Transport Systems, Yaşar Demirel

Yaşar Demirel Publications

Nonisothermal reaction-diffusion systems control the behavior of many transport and rate processes in physical, chemical and biological systems, such as pattern formation and chemical pumps. Considerable work has been published on mathematically coupled nonlinear differential equations by neglecting thermodynamic coupling between a chemical reaction and transport processes of mass and heat. This study presents the modeling of thermodynamically coupled system of a simple elementary chemical reaction with molecular heat and mass transport. The thermodynamic coupling refers that a flow occurs without or against its primary thermodynamic driving force, which may be a gradient of temperature or chemical potential or reaction …

Process Study For The Design Of Small-Scale 2 Kelvin Refrigeration Systems, Peter N. Knudsen

Mechanical & Aerospace Engineering Theses & Dissertations

Helium refrigeration at temperatures below 4.5-Kelvin (K), but greater than 0.8-K typically employ a sub-atmospheric process utilizing a vacuum pumping system. These types of helium refrigerators are of keen interest to present and future particle physics programs utilizing super-conducting magnet or radio-frequency technology. As such, there is a need for small scale 2-K helium refrigeration systems (i.e., those that operated below the lambda temperature) in small laboratories and test facilities at this time. This study establishes the key process parameter choices of flow ratio, heat-exchanger size, and supply pressure, and how they influence the overall system performance for various process …

Laser Diagnostic System Validation And Ultra-Compact Combustor Characterization, Terry B. Hankins

Theses and Dissertations

The AFIT combustion optimization and analysis laser (COAL) lab is now completely operational and is state-of-the-art in combustion diagnostics. The objective of this research is to perform a validation of a laser diagnostic system and to begin the characterization of a small-scale model of an ultra-compact combustor (UCC). Validation of the laser system was accomplished by using planar laser induced fluorescence (PLIF) on a laminar premixed hydrogen-air flame produced by a Hencken burner. OH species concentrations are measured. Flame temperatures are determined with a two line fluorescence technique using different transitions in the (1,0) band of the OH (A-X) electronic …

Knowledge-Based Information Resource Management System For Materials Of Sodium-Cooled Fast Reactor, Sean Hsieh

Reactor Campaign (TRP)

In the development of advanced fast reactors, materials and coolant/material interactions pose a critical barrier for higher temperature and longer core life designs. For advanced burner reactors (sodium cooled) such as EBR-II and FFTF, experience has shown that the qualified structural materials and fuel cladding severely limits the economic performance. In other liquid metal cooled reactor concepts, advanced materials and better understanding and control of coolant and materials interactions are necessary for realizing the potentials.

Liquid sodium has been selected as the primary coolant candidate for Gen. IV nuclear energy systems. Global Nuclear Partnership (GNEP) Advanced Burned Reactor (ABR) has …

The Role Of Diffusive Transport On Low And Intermediate Temperature Hydrocarbon Oxidation: Numerical Simulations Using The Wang-Mou Mechanism, Howard Pearlman, Michael R. Foster

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

The spatio-temporal temperature and species concentration distributions associated with low and intermediate temperature hydrocarbon oxidation are computed using a global thermo kinetic scheme augmented with diffusive transport. The scheme used for the computations was proposed by Wang and Mou and is extended to include diffusion of species and heat. The conservation equations for species and energy are then derived and solved for a one-dimensional and an axisymmetric, spherical domain for temperatures ranging from 540 to 660 Kat subatmospheric pressures. The predictions are then used to develop ignition diagrams for different Lewis ( Le) numbers. Increasing Le is found to promote …

The Role Of Diffusive Transport On Low And Intermediate Temperature Hydrocarbon Oxidation: Closed Reactor Experiments Using Equimolar N-Butane + Oxygen Premixtures At Reduced-Gravity, Howard Pearlman, Michael R. Foster

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

Experiments were conducted in a closed, spherical reactor aboard NASA's KC-135 reduced-gravity aircraft using an equimolar n-C4H10 + 0 2 premixture ( Le = 1.3) at subatmospheric · pressures to compliment model predictions and further explore the reactive-diffusive structure of cool flames and ignitions. The pressure and radial temperature histories were recorded and analyzed for different initial conditions. In addition, the visible light emission from excited formaldehyde was recorded using an intensified video camera and was observed to be radially symmetric in all cases. Unexpectedly, however, the measured temperature distributions during (and after the passage of) the cool flames and …

Thermodynamically Coupled Transport In Simple Catalytic Reactions, Yaşar Demirel

Yaşar Demirel Publications

Considerable work published on chemical reaction-diffusion systems investigates mainly mathematically coupled nonlinear differential equations. This study presents the modeling of a simple elementary chemical reaction with thermodynamically and mathematically coupled heat and mass transport with external mass and heat transfer resistances. The thermodynamic coupling refers that a flow occurs without or against its primary thermodynamic driving force, which may be a gradient of temperature or chemical potential. The modeling is based on the linear nonequilibrium thermodynamics approach and phenomenological equations by assuming that the system is in the vicinity of global equilibrium. This approach does not need detailed coupling mechanisms. …

Modeling And Design Algorithms For Electromagnetic Pumps, Daniel P. Cook, Yitung Chen, Jian Ma

Reactor Campaign (TRP)

Electromagnetic (EM) induction pumps are used extensively in current and proposed nuclear power systems and industrial molten metal transfer operations. Although the Magnetohydrodynamic (MHD) theory that underlies the operation of these types of pumps has been studied extensively in the past few decades, the design of specific EM pumping systems for specific flow cases requires computational tools and expertise, which is lacking in the U.S. However, for the past two years, researchers at UNLV have been utilizing the TC-1 liquid metal loop system at UNLV and an Annular Linear Induction Pump (ALIP) to drive the liquid metal and to develop …

Thermal Transient Flow Rate Sensor For High Temperature Liquid Metal Cooled Nuclear Reactor, Yingtao Jiang, Jian Ma

Reactor Campaign (TRP)

In nuclear power plants and accelerator driven systems (ADS) for nuclear waste treatment, it is important to monitor the coolant flow rate in the reactor core and pipe-line. In such a strong irradiation, high pressure, and temperature environment, the existing flow measurement techniques (such as Electromagnetic flow meters, Ultrasonic flow meters, Turbine flow meters, etc.) are not accurate and reliable.

The measurement of flow rates (mass flow rates or volume flow rate) plays a notable role in monitoring and controlling the experimental conditions. The bulk flow rates can be obtained through direct methods, which measure the amount of discharged fluids …

Knowledge-Based Information Resource Management System For Materials Of Sodium-Cooled Fast Reactor, Sean Hsieh

Reactor Campaign (TRP)

In the development of advanced fast reactors, materials and coolant/ material interactions pose a critical barrier for higher temperature and longer core life designs. For sodium-cooled fast reactors (SFRs) such as the Experimental Breeder Reactors in Idaho and the Fast Flux Test Facility in Hanford, experience has shown that qualified structural materials and fuel cladding severely limits their economic performance.

Liquid sodium has been selected as the primary coolant candidate for the Advanced Burner Reactor (ABR) of the Global Nuclear Partnership (GNEP). Materials improvement has been identified as a major thrust to improve fast reactor economics. Researchers from universities, national …