Systems Engineering and Multidisciplinary Design Optimization Commons^™

Multi-Objective Trajectory Optimization Of A Hypersonic Reconnaissance Vehicle With Temperature Constraints, Tadeusz J. Masternak

Theses and Dissertations

Temperature-constrained optimal trajectories for a scramjet-based hypersonic reconnaissance vehicle were generated by developing an optimal control formulation and solving it using a variable order Gauss-Radau quadrature collocation method. The vehicle was assumed to be an air-breathing reconnaissance aircraft that has specified takeoff/landing locations, airborne refueling constraints, specified no-fly zones, and specified targets for sensor data collections. The aircraft model included fight dynamics, aerodynamics, and thermal constraints. This model was incorporated into an optimal control formulation that includes constraints on both the vehicle as well as mission parameters, such as avoidance of no-fly zones and coverage of high-value targets. Optimal trajectories …

Identification Of Hydrodynamic Forces Developed By Flapping Fins In A Watercraft Propulsion Flow Field, Erdem Aktosun

LSU New Orleans Theses and Dissertations

In this work, the data analysis of oscillating flapping fins is conducted for mathematical model. Data points of heave and surge force obtained by the CFD (Computational Fluid Dynamics) for different geometrical kinds of flapping fins. The fin undergoes a combination of vertical and angular oscillatory motion, while travelling at constant forward speed. The surge thrust and heave lift are generated by the combined motion of the flapping fins, especially due to the carrier vehicle’s heave and pitch motion will be investigated to acquire system identification with CFD data available while the fin pitching motion is selected as a function …

Development Of Long Endurance Small Unmanned Aerial System, Andreas Quainoo

Honors Theses

The purpose of this Senior Design Project is to design, build, and test an Unmanned Aerial System (UAS). This will be used as a test platform for airborne electronics. The intended capabilities of this project include a 12-hour flight time, the ability to carry 5 lbs of payload, and the ability to recharge the batteries of electronics while in the air. With these parameters in mind, the focus of the design was on endurance, and, by extension, efficiency and durability. Upon completion, the aircraft and its onboard systems was constructed and evaluated. Secondary products of this project include an instrumented …

A Pareto-Frontier Analysis Of Performance Trends For Small Regional Coverage Leo Constellation Systems, Christopher Alan Hinds

Master's Theses

As satellites become smaller, cheaper, and quicker to manufacture, constellation systems will be an increasingly attractive means of meeting mission objectives. Optimizing satellite constellation geometries is therefore a topic of considerable interest. As constellation systems become more achievable, providing coverage to specific regions of the Earth will become more common place. Small countries or companies that are currently unable to afford large and expensive constellation systems will now, or in the near future, be able to afford their own constellation systems to meet their individual requirements for small coverage regions.

The focus of this thesis was to optimize constellation geometries …

Achieving Global Range In Future Subsonic And Supersonic Airplanes, Nihad E. Daidzic Ph.D., Sc.D.

International Journal of Aviation, Aeronautics, and Aerospace

No commercial airplane in service today is able to fly half great-circle distances over the globe and achieve the non-stop or the global range to any antipodal location on Earth. A subsonic jetliner has the optimum cruising speed at Mach numbers approaching the drag divergence Mach number while still preserving relatively high aerodynamic efficiency. Various fuel-flow laws were used to investigate the cruise performance of subsonic and supersonic aircraft. The effect of wind and aircraft weight and how it affects the optimal cruising airspeed was investigated. Of all different operational cruising techniques, the cruise-climb at high Mach numbers is the …

Cognitively Tailored Interfaces (Ctis) For Unmanned Aerial Vehicles (Uavs), Anna Parker Strickland

Von Braun Symposium Student Posters

No abstract provided.

Foss Big Data Storage Solution, Gary L. Jaffe

STAR Program Research Presentations

Utilizing the AERO Institute as an IT test bed or “sandbox”, a small-agile development team will design, build, and test a data management storage system to support post processing of archived and in-flight data collected with the Piccolo flight control system and Compact Fiber Optic Sensing System (C-FOSS). Both systems are integrated on the APV3 aircraft, a small remote-operated vehicle. Due to the amount of data collected from C-FOSS, a system will be designed to sort and organize large data sets. An open-source database will be explored as a viable solution to manage large data loads and provide multi-cluster system …

Hil Simulation For Smartphone-Guided Autonomous Systems, Matthew Gerdt

Computer Engineering

My bachelor thesis focuses on implementing a Hardware in the Loop (HIL) simulation for a quadcopter controlled by an Android smartphone. The HIL simulation will be able to test the software running on an Android smartphone by simulating a virtual quadcopter on the computer without the need to use an actual quadcopter. To accomplish this I will have to modify my team’s existing simulation to allow for the communication between the smartphone and simulation. At the completion of my work the HIL simulation will allow the testing of different aspects of the Android application, such as the tracking of an …

Applied Mass Properties Identification Method To The Cal Poly's Spacecraft Simulator, Long H. Dam

Master's Theses

The Cal Poly Spacecraft Simulator is currently being developed for future testing and verifying theoretical control applications. This paper details the effort to balance the platform and remove undesired external torque from the system using System Identification technique developed by Patrick Healy. Since the relationship between the input and output of the system is linear, the least square method is proposed to identify the mass properties and location of center of mass of the system. The tests use four sine wave generators that are out of phase with different amplitudes as the inputs to excite various structural modes of the …

Feasibilty Of Very Large Sparse Aperture Depolyable Antennas, Jason C. Heller

Theses and Dissertations

The objective of this research is to explore the technical soundness of a very large, cross-shaped, parabolic, sparse aperture antenna extending 75 m from the bus. Specifically, describing the environment of the satellite, the effect of fabrication error on the structure and the remaining error budget for the system. The methodology involves creation of an ideal truss structure, to which all others are compared. A uniform distribution of proportional errors up to 1e-5 is introduced into the truss members' lengths and the models are subjected to a static Finite Element Analysis. A solution for the surface normal error is addressed …

Development Of Safety Standards For Cubesat Propulsion Systems, Liam Jon Cheney

Master's Theses

The CubeSat community has begun to develop and implement propulsion systems. This movement represents a new capability which may satisfy mission needs such as orbital and constellation maintenance, formation flight, de-orbit, and even interplanetary travel. With the freedom and capability granted by propulsion systems, CubeSat providers must accept new responsibilities in proportion to the potential hazards that propulsion systems may present.

The Cal Poly CubeSat program publishes and maintains the CubeSat Design Specification (CDS). They wish to help the CubeSat community to safety and responsibly expand its capabilities to include propulsive designs. For this reason, the author embarked on the …

Landsat-8: Science And Product Vision For Terrestrial Global Change Research, David P. Roy, M. A. Wulder, T. R. Loveland, C. E. Woodcock, R. G. Allen, M. C. Anderson, D. Helder, J. R. Irons, D. M. Johnson, R. Kennedy, T. A. Scambos, C. B. Schaaf, J. R. Schott, Y. Sheng, E. F. Vermote, A. S. Belward, R. Bindschadler, W. B. Cohen, F. Gao, J. D. Hipple, P. Hostert, Desert Research Institute, Reno, Nv, C. O. Justice, Ayse Kilic, V. Kovalskyy, Z. P. Lee, L. Lymburner, J. G. Masek, J. Mccorkel, Y. Shuai, R. Trezza, J. Vogelmann, R. H. Wynne, Z. Zhu

School of Natural Resources: Faculty Publications

Landsat 8, a NASA and USGS collaboration, acquires global moderate-resolution measurements of the Earth's terrestrial and polar regions in the visible, near-infrared, short wave, and thermal infrared. Landsat 8 extends the remarkable 40 year Landsat record and has enhanced capabilities including new spectral bands in the blue and cirrus cloud-detection portion of the spectrum, two thermal bands, improved sensor signal-to-noise performance and associated improvements in radiometric resolution, and an improved duty cycle that allows collection of a significantly greater number of images per day. This paper introduces the current (2012–2017) Landsat Science Team's efforts to establish an initial understanding of …

Estimation Of Crop Gross Primary Production (Gpp): FaparChl Versus Mod15a2 Fpar, Qingyuan Zhang, Yen-Ben Cheng, A. I. Lyapustin, Yujie Wang, Feng Gao, Andrew E. Suyker, Shashi B. Verma, Elizabeth M. Middleton

School of Natural Resources: Faculty Publications

Photosynthesis (PSN) is a pigment level process in which antenna pigments (predominately chlorophylls) in chloroplasts absorb photosynthetically active radiation (PAR) for the photochemical process. PAR absorbed by foliar non-photosynthetic components is not used for PSN. The fraction of PAR absorbed (fAPAR) by a canopy/vegetation (i.e., fAPAR_canopy) derived from the Moderate Resolution Imaging Spectroradiometer (MODIS) images, referred to as MOD15A2 FPAR, has been used to compute absorbed PAR (APAR) for PSN (APAR_PSN) which is utilized to produce the standard MODIS gross primary production (GPP) product, referred to as MOD17A2 GPP. In this study, the fraction of PAR …

Remote/Autonomous Sentry Gun Platform, Angelo Gagliardi, Dante Gagliardi

Electrical Engineering

This senior project involves the complete system design and construction of a "Nerf" sentry gun to replace an armed guard. We aimed to develop a compact and highly mobile defense system that allows operational flexibility. The sentry gun can autonomously track and shoot at moving targets, while also allowing a user to remotely access and control the gun via computer. The mobility, hardiness, and functionality of this system allows a reliable replacement for human beings in harsh and hostile environments; ultimately sparing a life.

Interaction Model Of Functions In The National Airspace System, Nathan F. Koerschner, Steven J. Landry

The Summer Undergraduate Research Fellowship (SURF) Symposium

The National Airspace System (NAS) is comprehensively described by five functions derived from big-picture goals: (1) conflict detection and resolution, (2) controlling aircraft states, (3) traffic flow management, (4) controlling passenger states, and (5) controlling company resources. It can be reasonably assumed that these functions interact in some way; this interaction is currently unknown. A model of the entire NAS would be helpful in discovering these interactions, yet no such comprehensive model exists. To address this problem an agent-based state-based model was created in MATLAB. To date, only functions (1) and (2) were implemented. Running the model shows that there …

Design And Development Of A Microgravity Stowage System Specific For Deep Space Exploration, Taylor Stokes

Von Braun Symposium Student Posters

No abstract provided.

Preliminary Design Of Blade And Disc Fixing For Aerospace Application Using Multi-Disciplinary Approach, Abdulhalim Twahir

Doctoral Dissertations and Master's Theses

The preliminary design phase of a turbine rotor has an important impact on the architecture of a new engine definition, as it sets the technical envelope of the product to be designed. Additionally, preliminary design cycle times are increasingly critical in capturing business opportunities in an ever competitive environment. Improving the accuracy of the preliminary design (pre-detailed design) is also necessary as not only does it significantly reduce the overall development of an engine, but also because any mistakes made at this stage can be extremely hard to rectify.

Previously, typical pre-detail fixing design cycle time was greater due to …

Adopting A Kinetic Energy Recovery System For Helicopters, Nihad E. Daidzic

Aviation Department Publications

No abstract provided.

Architecting Integrated System Health Management For Airworthiness, Kerwin C. Teong

Theses and Dissertations

Integrated System Health Management (ISHM) for Unmanned Aerial Systems (UAS) has been a new area of research - seeking to provide situational awareness to mission and maintenance operations, and for improved decision-making with increased self-autonomy. This research effort developed an analytic architecture and an associated discrete-event simulation using Arena® to investigate the potential benefits of ISHM implementation onboard an UAS. The objective of this research is two-fold: firstly, to achieve continued airworthiness by investigating the potential extension of UAS expected lifetime through ISHM implementation, and secondly, to reduce life cycle costs by implementing a Condition-Based Maintenance (CBM) policy with better …

If It Isn’T Tested, It Doesn’T Work: Automated Verification Of Sofia Data Handling Software, Garrett Holthaus, Brett Stroozas, Zaheer Ali

STAR Program Research Presentations

This project involves writing code to automate the verification testing of the Data Handling Working Group (DHWG) software tools for the Stratospheric Observatory for Infrared Astronomy (SOFIA). The DHWG tools extract engineering data from SOFIA missions. Engineering data includes a variety of information on the operations and status of SOFIA systems during a flight, including computer network traffic, user commands, and images acquired from cameras mounted on the telescope assembly. It is important to review engineering data because this data can lead to the discovery of any problems or inefficiencies in SOFIA hardware and software. Analysis of engineering data can …

Design, Fabrication And Test Of An Operationally Responsive Aircraft With Niirs Evaluated Imager, Colin Burt

Master's Theses

Unmanned Aerial Systems (UAS) are a growing asset. Currently UAS are on the cutting edge with resources being spent developing the capabilities mostly for military use. This project is intended to create a system for non-defense customers. Specifically, the Operationally Responsive Aircraft (ORA) will appeal to academic institutions, individual consumers, future customers new to the UAS industry, as well as anybody trying to get airtime for custom sensors.

The system developed in this project utilizes dual aluminum external payload bays attached to a ParkZone Radian aircraft. Each external payload bay can contain approximately 500 $\text{cm}^3$, with a height and width …

Fluid-Structure Interaction And Multidisciplinary Design Analysis Optimization Of Composite Wind Turbine Blade, Naishadh G. Vasjaliya

Doctoral Dissertations and Master's Theses

A multidisciplinary design analysis optimization (MDAO) process is defined for a composite wind turbine blade to optimize its aerodynamic and structural performance by developing a fluid-structural interaction (FSI) system. The objectives are to maximize aerodynamic efficiency and structural robustness while reducing blade mass and total cost. In the previous research, a MDO process of a composite wind turbine blade has been pioneered as an effective process to develop structurally optimized blade design. Present MDAO process is defined in conjunction with structural and aerodynamic performance of the blade which is divided into three steps and the design variables considered are related …

Control Design And Implementation For An Autonomous Surface Vehicle Using Azimuth Thrusters, Stanton James Coffey

Mechanical & Aerospace Engineering Theses & Dissertations

Autonomous Surface Vehicle research for water applications is inspired by a technological push to create more automated robotics that can perform functions too menial for a human to spend time on as well as too complex, difficult, or dangerous for a person to perform. The development objective is to construct, program, and test an autonomous surface vehicle that can perform precision hold maneuvers independent of human control. This capability would be useful in many situations where it is desirable to freeze the current position of the boat in order to perform some duty task. To conduct the research for this …

Improving Affordability: Separating Research From Development And From Design In Complex Programs, Bohdan W. Oppenheim

Systems Engineering Faculty Works

This paper presents arguments for why defense programs creating physical systems should clearly separate three developmental phases from each other: research, development and design. Research is to be performed first by small teams of scientists addressing the "unknown unknowns" and maturing fundamental science from TRL of 1 to about 3. Next, development of physical modules is to be performed by small and highly specialized engineers. Finally, the system-level design should focus on efficient trading off the module locations, sizes and shapes versus system performance, mass, power requirements, etc. The design with all modules mature and available is equivalent to a …

Creation And Analysis Of An Electric And Magnetic Model Of A Micro Ion Thruster, Maxwell Bodnar

Aerospace Engineering

This report explores the magnetic and electric fields within the Cal Poly Miniature Xenon Ion (MiXI) Thruster V3 in order to create a comprehensive electric and magnetic model of the plasma chamber to analyze and test the current thruster configurations and changes to the existing thruster. This model is used to analyze the operation and efficiency of the ion thruster and the plasma environment within the plasma chamber. This model explores the ionization and electron collision rates during operation of the thruster to measure the efficiency of the current thruster configuration, also determining the theoretical Isp and thrust of the …

Feasibility Of Microsatellite Active Debris Removal Systems, Karsten J. James

Master's Theses

Space debris has become an increasingly hazardous obstacle to continued spaceflight operations. In an effort to mitigate this problem an investigation of the feasibility of a microsatellite active debris removal system was conducted. Through proposing a novel concept of operation, utilizing a grapple-and-tug system architecture, and by analyzing each resultant mission phase in the frame of a representative example, it was found that microsatellite scale systems are capable of fulfilling the active debris removal mission. Analysis of rendezvous, docking, control and deorbit mission requirements determined that the design of a grapple-and-tug system will be driven by sizing of the propellant …

Design, Fabrication, And Testing Of An Emr Based Orbital Debris Impact Testing Platform, Jeffrey J. Maniglia Jr.

Master's Theses

This paper describes the changes made from Cal Poly’s initial railgun system, the Mk. 1 railgun, to the Mk. 1.1 system, as well as the design, fabrication, and testing of a newer and larger Mk. 2 railgun system. The Mk. 1.1 system is developed as a more efficient alteration of the original Mk. 1 system, but is found to be defective due to hardware deficiencies and failure, as well as unforeseen efficiency losses. A Mk. 2 system is developed and built around donated hardware from the Naval Postgraduate School. The Mk. 2 system strove to implement an efficient, augmented, electromagnetic …

Enabling Rapid Conceptual Design Using Geometry-Based Multi-Fidelity Models In Vsp, Joel Brian Belben

Master's Theses

The purpose of this work is to help bridge the gap between aircraft conceptual design and analysis. Much work is needed, but distilling essential characteristics from a design and collecting them in an easily accessible format that is amenable to use by inexpensive analysis tools is a significant contribution to this goal. Toward that end, four types of reduced-fidelity or degenerate geometric representations have been defined and implemented in VSP, a parametric geometry modeler. The four types are degenerate surface, degenerate plate, degenerate stick, and degenerate point, corresponding to three-, two-, one-, and zero- dimensional representations of underlying geometry, respectively. …

Pseudolite Architecture And Performance Analysis For The Faa's Nextgen Airspace, Joseph A . Czabaranek

Theses and Dissertations

By 2025 the FAA plans to have fully implemented its NextGen Airspace design. NextGen takes advantage of modern positioning technologies as well as automation, data sharing, and display technologies that will allow more efficient use of our ever busier National Airspace (NAS). A key element of NextGen is the transition from surveillance RADAR providing aircraft separation and navigation to the use of the GPS and Automatic Dependent Surveillance Broadcast (ADS-B). ADS-B couples the precision of the GPS with networked ground and airborne receivers to provide precise situational awareness to pilots and controllers. The result is increased safety, capacity, and access …

Supplementary Computer Generated Cueing To Enhance Air Traffic Controller Efficiency, Laurienne Cibelle Rodrigues De Assis Santana

Theses and Dissertations

Air traffic controllers are often required to simultaneously communicate with several aircraft over multiple radio frequencies. As a result, during peak loading, it is common for the controller to receive multiple concurrent communications, each from a different aircraft, making it difficult to discern audio messages received from multiple pilots simultaneously. To address this problem, a modified air traffic control (ATC) interface was prototyped with the goal of increasing controller-to-pilot communication efficiency. This prototype included supplementary text cueing which was provided by a hypothetical automated text to speech system in an on-screen text box for controller reference in the event of …