Systems Engineering and Multidisciplinary Design Optimization Commons^™

Investigation Of Bio-Inspired Design Tools In Satellites, Spoorti Nanjamma

Discovery Day - Daytona Beach

This study investigates the application of Biologically Inspired Design (BID) tools within student-led satellite design teams, with the goal of enhancing early-stage systems engineering practices. As CubeSat missions become increasingly complex and resource-constrained, there is a need for approaches that support innovative yet structured problem-solving. While BID has shown promise in other engineering domains, its practical integration into satellite design, remains limited. To address this gap, three interactive workshops were developed and implemented with a Embry-Riddle Aeronautical university CubeSat team – Project COMET. The first workshop focused on functional decomposition, guiding students to express subsystem behavior in verb–noun form and …

Model-Based Systems Engineering Test Case Development And Traceability For Cubesats, Spoorti Nanjamma, Abigail Butcher

Discovery Day - Daytona Beach

Model-Based Systems Engineering (MBSE) using CATIA Magic Systems of Systems Architect (formerly known as CAMEO) is applied to develop a structured and traceable approach to test case modeling for CubeSat missions. The effort focuses on supporting unit-, subsystem-, and system-level testing by explicitly linking system requirements to corresponding test cases within the model, ensuring clear traceability across all verification levels. Each test case is organized within a dedicated package that includes a Block Definition Diagram (BDD) and Internal Block Diagram (IBD) to represent the complete test configuration, capturing all relevant components, subsystem boundaries, and interface connections involved in the test …

Using Sysml Models To Verify System Design And Identify Discrepancies In A Satellite System, Noah Fulton

Discovery Day - Daytona Beach

This study investigates the use of Systems Modeling Language (SysML) to verify subsystem design consistency and identify integration discrepancies in a multidisciplinary satellite program. Project COMET, an Embry-Riddle effort under the University Nanosatellite Program (UNP), consists of six subsystems but lacks a centralized system model. This leads to inconsistencies between subsystem inputs, outputs, and interface definitions. Typically, SysML models are created early in the system design cycle; However, this study will evaluate how creating system models post preliminary design review (PDR) can assist a project by verifying subsystem integration or by identifying discrepancies between independently developed subsystems. This study will …

Nasa Micro-G Next Adjustable Tool Cart Handle, Lauren Manges, Montgomery Tompkins, Mira Giunta, Lucas Pulliam, Aaron Vera-Rodriguez, Abbigail Dipalma, Justin Campos

Discovery Day - Daytona Beach

Effectiveness, reliability, and dust resistance are essential for astronaut tools operating on the lunar surface, where vacuum exposure, temperature extremes, and abrasive regolith present severe design challenges. The 2026 NASA Micro-g NExT ATCH Challenge calls for a height-adjustable handle that accommodates the full anthropometric range of suited astronauts while maintaining mechanical durability in dusty conditions. Team Lunarticks presents L.A.T.C.H. (Locking Adjustable Telescoping Cart Handle)—a lightweight, ergonomic, and regolith-resistant device engineered for use during Artemis III surface operations. The handle adjusts between 35–47 inches, enabling astronauts from the 1st to 99th percentile to maneuver the tool cart comfortably and efficiently. A …

Evatoolpad (Eva Passive Attachment Device), Parth Thakar, Olivia Tamer, Amaris Paranjattu, Vaidehi Saini, Sebastian Guerrero, Nicolai Diaz, Abirami Srenivasan

Discovery Day - Daytona Beach

The Micro-Nauts, developed under NASA’s Micro-G NExT challenge, strive to positively impact lunar and deep space missions through extravehicular activities (EVA). As Aerospace Engineering students, they have the common passion of addressing real, current space exploration needs and gaining relevant engineering experience. The passive capture tool dock provides the durability, reliability, and ease that are necessary for all EVAs that will take place in NASA’s upcoming Artemis missions. When a human is in a non-traditional environment performing highly important tasks, the last thing they want to do is struggle with a simple component that keeps their tools attached to them. …

Project Nightshade: Carrier-Based Multirole Navy Strike Fighter Aircraft, Matthew Kaplan, Alex Gardner, Adam Wanner, Sara Gonzalez, Joseph Deleo, Canyon Swaffar

Discovery Day - Daytona Beach

Project Nightshade: Detail Design for a Carrier-Based Multirole Strike Fighter This project focuses on the structural detail design of the wing box for a carrier-based multirole strike fighter, emphasizing strength, stiffness, and fatigue resistance under maneuver and carrier landing loads. The objective is to develop a structurally efficient configuration capable of supporting critical loading conditions while maintaining realistic weight and structural integrity. Classical aerospace structural analysis methods were used to size primary load-carrying components including spar caps, shear webs, and skin panels. Maneuver and gust load cases were applied to determine internal shear forces and bending moments, enabling calculation of …

M.O.D.U.S. Modular Optical Design Using Specular Film, Mario Gutierrez, Robert Thibodeau, Emma Show, Desiree Robinson, Lingyuan Meng, Sean Martin, Conner Beeson

Discovery Day - Daytona Beach

High-quality parabolic mirrors, which are vital components in reflecting telescopes, are typically bulky, costly, and highly fragile. This experiment explores the feasibility of using specular Class B Mylar as an unconventional, lightweight, and cost-effective alternative. This approach could enable new telescope designs by greatly reducing weight and manufacturing expenses, while also opening options for potential adaptability.   This approach involves using Mylar, a flexible, reflective style of plastic. The mylar is formed into a concave mirror by stretching a sheet over a chamber and depressurizing one side to force the sheet into the necessary curved shape. Multiple designs are being created …

Orbital Servicing Calibration And Repair (O.S.C.A.R.), Samantha Rogers, Chloe Arnold, Ava Laudadio

Discovery Day - Daytona Beach

Low Earth Orbit (LEO) satellites operate in an environment that exposes them to cumulative radiation effects, micrometeoroids, and orbital debris, and limited opportunities for post-launch intervention. These factors can degrade satellite performance over time, leading to anomalies that may cause data corruption, mission failure, or require human intervention for repair. While previous on-orbit servicing efforts have demonstrated repair and life-extension capabilities, most have focused on Geosynchronous satellites or controlled test environments, leaving a gap in servicing concepts tailored specifically to LEO satellites.The O.S.C.A.R. (Orbital Servicing, Calibration, and Repair) project investigates the design of a robotic servicing system for inspecting, calibrating, …

Evaluation Of Orbit And Mission Design Parameters Considered In Real Space Missions, Enrique Alejandro Amaya Villegas

Discovery Day - Daytona Beach

Orbit and mission design constitute a fundamental spacecraft subsystem, as the selected orbital regime and mission profile strongly influence power availability, communications geometry, propulsion requirements, and overall mission performance. This project investigates how key quantitative and qualitative parameters guide orbit and mission design decisions in real space missions, with particular emphasis on orbital altitude and inclination, ground coverage and revisit time, mission lifetime, launch vehicle performance constraints, and propulsion budgets. The primary objective is to develop a structured understanding of how high-level scientific or commercial objectives, together with cost, risk, and operational constraints, are translated into specific orbital architectures and …

Applications Of A Swarm-Behavior Model On Existing Satellite Constellations, Naomi Lee

Discovery Day - Daytona Beach

The scope of this work explores biological swarm behavior and its application to low- and medium-sized Earth orbit satellite constellation systems. Existing constellation structures have predetermined orbits, meaning there is little adaptivity in the spacing and interactions between satellites. This allows for formation disruption by atmospheric perturbations in lower Earth orbit trajectories but can be countered with interactive controls that help with structure stability. This adaptive spacing and control can also be applied in MEO constellations in coverage and positioning optimization. In ‘mimicking’ this swarm behavior in starling murmurations, the separation, alignment, and cohesion flocking behavior of satellite groupings will …

Microgravity Operations: Passive Capture Tool Dock Development, Tyler Mastroianni, Alexander Choinski, David Smith, Matthew Perkins, Kelsey Hunsicker, Jeanelle Ferdinand

Discovery Day - Daytona Beach

The 2026 NASA Micro-g NExT Challenge 2 requests a device that simplifies the stowage of tools during EVAs. EVAs are crucial during missions, but their effectiveness is hindered because of challenging tool management. Our device, Latch Point, is designed to streamline tool stowage, allowing astronauts to secure tools more efficiently and with less physical strain. This will reduce the duration of EVAs, improving mission productivity. This is important because EVAs are expensive due to the complexity of the suits and the training and preparation required of astronauts before they can undergo these types of missions. This new device would reduce …

Interplanetary Trajectory Optimization With Reinforcement Learning, Shiloh Cuffe

Discovery Day - Daytona Beach

This project investigates the application of reinforcement learning (RL) to optimize low-thrust interplanetary trajectory design, focusing on the Earth-Venus transfer leg of the BepiColombo mission. Traditional trajectory optimization methods, such as patched conics and genetic algorithms, often require simplifying assumptions or complex optimization schemes. This work formulates the trajectory design problem as an optimal control problem (OCP) within a Markov Decision Process (MDP) framework, enabling an RL agent to learn efficient transfer strategies under realistic spacecraft constraints. The objective is to develop an autonomous guidance approach capable of replicating or improving upon established mission designs. The spacecraft is modeled as …

Feasibility Of High-Throughput Onboard Ai For Mars Rovers Under Solar Constraints, Aashman Gupta

Discovery Day - Daytona Beach

This project evaluates the feasibility of sustained onboard AI autonomy for a solar-powered Mars rover by directly linking solar energy availability to achievable compute performance. While Mars solar irradiance and edge computing performance have been studied independently, no unified framework currently couples surface power generation to autonomy throughput in an experimentally validated manner. The project will begin with a simulation of solar power generation for a 1 m² rover-mounted array across a Martian sol, accounting for seasonal variation, dust opacity, and array configuration (fixed versus sun-tracking). The resulting power profile will then be coupled to representative compute platforms running autonomy …

Experimental Design And Comparative Analysis Of Cubesat-Based Reflector Concepts For Future Solar Energy Redirection On Mars, Tatyana Vladislavova Ivanova

Discovery Day - Daytona Beach

Previous research shows that redirecting sunlight with large orbital mirrors could support warming specific regions of Mars by targeting ice deposits and releasing greenhouse gases. Although the concept has strong theoretical support, deploying and adjusting massive rigid reflectors in orbit remains a major technical challenge. This study aims to investigate the impact of using a swarm of small, adjustable CubeSats equipped with different reflector types on the effectiveness of solar energy redirection for Martian surface heating. Through comparison of multiple designs in controlled conditions, this work addresses whether smaller, flexible systems could offer a practical alternative to traditional large mirrors. …

An Energy-Aware Meta-Learning Framework For Real-Time Lunar Rover Localization Via Adaptive Algorithm Selection, Jose Demedeiros, Garrett Seyler

Discovery Day - Daytona Beach

This work proposes an energy-aware meta-learning framework that selects the single most suitable localization algorithm for a lunar rover, per scene, using only monocular imagery and orbital maps. The goal is to achieve sub-meter accuracy while minimizing onboard compute and energy consumption. We assemble a suite of seven lunar-relevant algorithms spanning relative and absolute localization, including monocular ORB-SLAM3, LuVo homography-based visual odometry, Censible cross-view matching with orbital imagery, crater-based methods (LunarNav and ShadowNav), monocular horizon navigation with a DEM, and DROID-SLAM. Relative methods provide incremental motion updates, while absolute methods deliver global pose fixes; an Extended Kalman Filter fuses these …

Design And Implementation Of A Synchronized Data Acquisition System For An Ihlp Cessna 182 Testbed, Celso Ferreira De Moura, Mariano Chavez Rangel

Discovery Day - Daytona Beach

This work presents the design and implementation of a fully integrated data acquisition system for a full scale Integrated High Lift Propulsion testbed based on a Cessna 182Q, with emphasis on hardware integration, sensor reliability, and time synchronization. A centralized architecture was developed in LabVIEW to acquire, process, and store data from both analog and digital sensors, including air data systems, inertial measurement units, control positions, and propulsion instrumentation. Analog sensors were carefully calibrated to ensure accurate conversion to engineering units, while digital sensors were incorporated into a unified framework to maintain consistency across all measurements. All ADC, GPS, INS, …

Accelerating Search And Rescue Response: A Simulation Study On The Dynamic Efficiency Of Flocking-Enabled Drone Swarms, Sophia Beckwith, Carys Del Prete

Discovery Day - Daytona Beach

This project explores how imitations observed in animal group behavior, specifically flocking in birds, can be applied to the functionality of autonomous drone systems to aid in search and rescue efforts. The goal is to demonstrate how incorporating code based on the Boids, Vicsck and predictive control linear algebraic mathematical models for drone flight controls and the collective behaviors of flocks will increase the efficiency of drone maneuvers, allowing them to reorganize and fill gaps when one is removed. A MATLAB-based simulation was developed to model the behaviors using research conducted on the symmetric and synchronized behaviors observed from flocks …

Interplay Between Physical Design Choices And Emergent Cyber System Consensus: A Case Study With An Underwater Swarm, Ava Neubert

Discovery Day - Daytona Beach

Understanding how physical constraints influence collective behavior is critical for designing cyber-physical multi-agent systems in communication-limited environments. This project investigates how agent mobility and communication constraints affect opinion dynamics in a three-dimensional underwater swarm. An agent-based model was developed in AnyLogic, where agents follow realistic motion dynamics and exchange information at discrete communication intervals to reflect underwater limitations. Agent opinions are modeled using a BOIDS-inspired consensus mechanism in RGB space, allowing visualization of convergence behavior. A sensitivity analysis was conducted to evaluate the effects of communication range, agent speed, turn rate, and swarm size. Results show that communication range has …

Noise-Optimized Routes For Air Taxi, Waleed Raza

Doctoral Dissertations and Master's Theses

Community noise is a primary barrier to the public acceptance and deployment of Advanced Air Mobility (AAM) and Urban Air Mobility (UAM) air taxi operations. This dissertation develops a coupled siting, routing, and noise optimization framework that links vertiport placement to its downstream acoustic consequences, demonstrated through a Daytona Beach case study. Candidate vertiports are screened and selected using accessibility, safety, demand, and feasibility criteria, and the selected sites form a directed network of 20 routes. Each trajectory is evaluated with a physics-based acoustic pipeline reporting Lmax, SEL, and EPNL at school, hospital, and residential receptors, showing that received exposure …

Optimal Integrated Cfd-Gnc Model For Drag-Based Reentry Dynamics, Sebastian Lopez

Doctoral Dissertations and Master's Theses

This research focuses on optimizing the control of a drag-maneuvering, Starship-class re-entry vehicle by closely integrating high-fidelity aerodynamic data derived from Computational Fluid Dynamics (CFD) simulations, specifically using StarCCM+. The aerodynamic models, tailored to the unique geometry of a drag-maneuvering body, are seamlessly incorporated into a guidance, navigation, and control (GNC) framework. This integration enables closed-loop CFD simulations with real-time control feedback, allowing for direct analysis and optimization of vehicle stability, trajectory, and control demands throughout the re-entry process.

Building upon the work of Gaglio and Bevilacqua, this advanced CFD-GNC model introduces high-order aerodynamic effects, such as aerodynamic moments and …

Leveraging Information Theory And Ecological Network Analysis To Monitor Communication Networks In A Student Aerospace Team, Christine Sessions

Doctoral Dissertations and Master's Theses

Effective communication is a critical component of successful collaboration in group projects and team settings. However, systematically tracking and analyzing team communications can be challenging, especially in complex, multi-member teams such as those found in the aerospace industry. This paper explores an information-theoretic approach that leverages encoding techniques and graph theory to analyze communication networks within a university’s multi-year, student-led cubesat design project (Project COMET). By utilizing Shannon Entropy as a measure of information flow, encoding communication patterns, and analyzing Ecological Network Analysis parameters, this research aims to understand how an Embry-Riddle Aeronautical University student project team evolves over the …

Digital Twin–Oriented Certification Architecture For Advanced Air Mobility, Daniel Pleffken

International Journal of Aviation, Aeronautics, and Aerospace

Advanced Air Mobility (AAM) systems introduce certification challenges associated with distributed propulsion, increasing software reliance, and tightly coupled architectures. These characteristics evolve within regulatory environments that are still adapting to emerging vehicle concepts. While digital engineering practices are increasingly adopted during system development, certification workflows remain largely document-centric, limiting lifecycle traceability and consistent reasoning about change impacts as designs and regulatory interpretations evolve. This paper proposes a Digital Twin–oriented certification architecture that integrates regulatory knowledge, system representations, Means of Compliance (MoCs), and verification artifacts within a unified model-based environment. The architecture is organized around four elements: regulatory structuring, Model-Based Systems …

Instrumentation And Control Of A Novel Device To Simulate A Hypersonic Environment, Andrew Marcello

Doctoral Dissertations and Master's Theses

The hypersonic flow regime poses several challenges regarding the design of hypersonic vehicles. Among them is the massive energy and economic expense associated with ground- testing evaluation of material responses within this extreme environment. In order to provide a low-cost, rapid option for preliminary material analysis within hypersonic applications, a novel device is under production to replicate this environment on the surface of these materials. This device has been designed to work in conjunction with Argonne National Laboratory (ANL) Advanced Photo Source (APS) synchrotron, to allow for in-situ characterization of ablation and oxidation on the sample surface.

To achieve this, …

Artificial Intelligence In Human Spaceflight Safety-Critical Systems: A Requirements Framework For Ai-Enabled Computer-Based Control Systems, Liz Bosch

Doctoral Dissertations and Master's Theses

Currently, there is no governing standard that addresses the safe integration of AI into computer-based control systems (CBCS) in human spaceflight. The computer-based control expectations of those safety-critical systems on the International Space Station (ISS) are captured in SSP 50038, Computer-Based Control System Safety Requirements, with one caveat: the standard was not designed with AI applications in mind. SSP 50038 does not cover the probabilistic behavior, opacity, and training-data dependency of modern AI/ML systems. The objectives of this work is to develop an AI taxonomy relevant to safety characteristics (determinism, transparency, data dependency, failure predictability), systematically map AI characteristics against …

Evaluating Runtime Monitoring For Reinforcement Learning-Based Flight Control, Andrew Zubyk

Doctoral Dissertations and Master's Theses

Ensuring safety in adaptive flight controls systems is an ongoing challenge in aviation, especially as advancements in artificial intelligence and machine learning (AI/ML) trend upwards. Reinforcement learning is becoming more common in aerospace applications due to the ability to improve these models through training.  While models such as reinforcement learning enable controllers to learn complex behaviors from interaction with the environment, their unpredictability in novel or disturbed conditions raises severe concerns in safety-critical domains. This research investigates the integration of runtime monitoring, a real-time assurance technique, with reinforcement learning-based flight controllers to ensure safety and reliability during flight. By supervising …

A Tangible Modeling Language For Systems Engineering, Maissane Aik

Student Research Symposium (SRS)

With the continuous growth of technology and system complexity, systems engineering plays a crucial role in ensuring performance, adaptability, and clarity across interconnected processes. Yet, as modeling tools become increasingly abstract and dependent on digital infrastructures, they have drifted away from the tangible, intuitive ways humans naturally think, communicate, and design. Current modeling approaches often require engineers to navigate numerous diagrams and layers of abstraction. To address the gap, this research will focus on creating a novel systems engineering language that reintroduces tangibility into system modeling. The proposed language will represent system elements as modular blocks that capture structure, behavior, …

The Role Of Optical And Synthetic Aperture Radar Satellites In Military Intelligence, Khalifa Alnaqbi

Student Research Symposium (SRS)

The objective of this paper is to demonstrate that while optical and Synthetic Aperture Radar satellites are the two most powerful remote sensing tools in military intelligence, neither is sufficient on its own. This research aims to articulate their distinct operational roles and argue that their synergistic integration, together with other intelligence assets such as unmanned aerial vehicles, signals intelligence, and human intelligence, is essential for achieving comprehensive situational awareness in modern warfare. To establish this, the paper will first analyze the role of optical satellites in target identification and Synthetic Aperture Radar satellites in persistent detection and monitoring, detailing …

Orbital Maneuvers And Interplanetary Trajectory Design Via Reinforcement Learning, Roberto Cuéllar Rangel

Doctoral Dissertations and Master's Theses

This dissertation investigates the application of reinforcement learning (RL) to the design and optimization of low-thrust spacecraft trajectories, with an emphasis on autonomy, adaptability, and robustness in the presence of system uncertainties and unmodeled perturbations. Classical approaches to low-thrust trajectory design are predominantly grounded in optimal control theory, which relies on the availability of precise dynamical models and often requires problem-specific reformulation and solver tuning. While optimal control methods offer high accuracy under deterministic conditions, their sensitivity to stochastic disturbances and computational limitations in highly nonlinear or uncertain environments pose significant challenges for future autonomous space missions.

To address these …

Aircraft Turnaround Bottlenecks: Addressing Ground Handling Delays For Operational Excellence, Vigneswaran Cm, Syedeen Khan, Benedict M, Srinath R, Mukesh Pr, Jayaram R Pothnis, Inamul Hasan

International Journal of Aviation, Aeronautics, and Aerospace

Ground handling delays at major airports pose significant challenges, impacting operational efficiency, airline schedules, and passenger satisfaction. This study explores the root causes of these delays, including resource constraints, operational inefficiencies, adverse weather, technical failures, and security issues. By examining case studies from major airports, the report identifies key solutions such as technology integration, infrastructure upgrades, staff training, standardized procedures, and enhanced communication systems. The findings underscore the importance of adopting proactive and collaborative approaches to optimize ground handling operations, ensuring smoother airport workflows and improved service delivery in the face of growing air traffic demands.

An Operational Field Study: A Comparison Of Piloting Uncrewed Underwater Vehicles And Uncrewed Aircraft Systems, David Thirtyacre, Joseph Cerreta, Pete Miller, Kimberly Luthi, Jolee Thirtyacre

Publications

and operations, the ability to cross-train personnel in both Uncrewed Underwater Vehicles and Small Uncrewed Aircraft System operations has become a focal point for efficiency and workforce optimization. This study presents a comparative analysis of the operational and human factor considerations involved in piloting mini UUV and sUASs, highlighting the key similarities and differences in control methods, environmental influences, navigation, emergency procedures, and situational awareness. A qualitative experimental field study was conducted between July 2024 and October 2024, involving real-world deployments of both systems in maritime and aerial environments. Findings indicated that while UUV and sUAS operators relied on remote …